Effect of cold expansion and bolt clamping on fretting fatigue behavior of Al 2024-T3 in double shear lap joints

Engineering Failure Analysis

Volumn 25, Issue , 2012, Pages 29-41

  Chakherlou, T N ^a   Shakouri, M ^a   Akbari, A ^b   Aghdam, A B ^c  

^a UNIVERSITY OF TABRIZ   (Iran)

^b SAHAND UNIVERSITY OF TECHNOLOGY   (Iran)

^c Louisiana State University   (United States)

Author keywords

Cold working; Fasteners; Fatigue testing; Fretting; Residual stress

Indexed keywords

2024-T3; CLAMPING FORCE; COLD EXPANSION; COMBINED EFFECT; DOUBLE-SHEAR; FATIGUE BEHAVIOR; FRETTING; FRETTING FATIGUES; LAP JOINT; LOAD RANGE;

BOLTS; COLD WORKING; EXPANSION; FASTENERS; FATIGUE OF MATERIALS; FATIGUE TESTING; FRETTING CORROSION; RESIDUAL STRESSES;

SHEAR FLOW;

EID: 84861217401     PISSN: 13506307     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfailanal.2012.04.008     Document Type: Article

References (47)

1. Szolwinski M.P., Farris T.N. Mechanics of fretting fatigue crack formation. Wear 1996, 198:93-107.
2. Segerfrojd G, Wang GS, Plamber B, Blom AF. Fatigue behavior of mechanical joints: critical experiments and statistical analysis. In: The Proceedings of ICAF 97; 1997.
3. Glaeser W.A., Lawless B.H. Behavior of alloy Ti-6al-4v under pre-fretting and subsequent fatigue conditions. Wear 2001, 250-251:621-630.
4. Conner B.P., Lindley T.C., Nicholas T., Suresh S. Application of a fracture mechanics based life prediction method for contact fatigue. Int J Fatigue 2004, 26:511-520.
5. Hills D.A. Mechanics of fretting fatigue. Wear 1994, 175:107-113.
6. Vingsbo O., Soderberg S. Fretting maps. Wear Mater 1987, 2:885-894.
7. Lindley T.C. Fretting fatigue in engineering alloys. Int J Fatigue 1997, 19:39-49.
8. Ruiz C., Boddington P.H.B., Chen K.C. An investigation of fatigue and fretting in a dovetail joint. Exp Mech 1984, 208-217.
9. Ruiz C, Chen KC. Life assessment of dovetail joints between blades and discs in aero-engines. In: Proceedings of the international conference on fatigue, Sheffield, UK; 1986.
10. Nowell D., Hills D.A. Crack initiation criteria in fretting fatigue. Wear 1990, 136:329-343.
11. Kuno M., Waterhouse R.B., Nowell D., Hills D.A. Initiation and growth of fretting fatigue cracks in the partial slip regime. Fatigue Fract Eng Mater Struct 1989, 12:387-398.
12. Terada H. Structural fatigue and joint degradation. Int J Fatigue 2001, 23:21-30.
13. Burlat M., Julien D., Levesque M., Bui-Quoc T., Bernard M. Effect of local cold working on the fatigue life of 7475-T7351 aluminium alloy hole specimens. Eng Fract Mech 2008, 75:2042-2061.
14. Priest M., Poussard C.G., Pavier M.J., Smith D.J. An assessment of residual-stress measurements around cold-worked holes. Exp Mech 1995, 35:361-366.
15. Ozdemir A., Edwards L. Relaxation of residual stresses at cold-worked fastener holes due to fatigue loading. Fatigue Fract Eng Mater Struct 1997, 20:1443-1451.
16. Backman D., Cowal C., Patterson E.A. Analysis of the effects of cold expansion of holes using thermoelasticity and image correlation. Fatigue Fract Eng Mater Struct 2010, 33:859-870.
17. She GF, Chen Yo, Chen Ya, Cold expanding of holes improves fatigue-life of aluminium alloy components, In: Fatigue prevention and design. In: Proceedings of the international conference, Amsterdam, Netherlands. London: Engineering Materials Advisory Services; 1986. p. 99-106.
18. Leon A. Benefits of split mandrel cold working. Int J Fatigue 1998, 20:1-8.
19. Schijve J. Fatigue of structures and materials. 2nd ed 2009, Springer.
20. Chakherlou T.N., Vogwell J. A novel method of cold expansion which crates near-uniform compressive tangential residual stress around a fastener hole. Fatigue Fract Eng Mater Struct 2004, 27:343-351.
21. Ireman T. Three dimensional stress analysis of bolted single-lap composite joints. Compos Struct 1998, 43:195-216.
22. Atzori P., Lazzarint P., Quaresimin M. A re-analysis on fatigue data of aluminium alloy bolted joints. Int J Fatigue 1997, 19:579-588.
23. Shankar K., Dhamari R. Fatigue behaviour of aluminium alloy 7075 bolted joints treated with oily film corrosion compounds. Mater Des 2002, 23:209-216.
24. Chakherlou T.N., Mirzajanzadeh M., Vogwell J., Abazadeh B. Investigation of the fatigue life and crack growth in torque tightened bolted joints in single plate. Aerosp Sci Technol 2011, 15:304-313.
25. Chakherlou T.N., Abazadeh B. Estimation of fatigue life for plates including pre-treated fastener holes using different multiaxial fatigue criteria. Int J Fatigue 2011, 33:343-353.
26. Mir A.A., Murphy S. Preload relaxation of threaded fasteners in sand-castings of zinc-based alloys. J Mater Sci 1998, 33:4327-4332.
27. Papanikos P., Meguid S.A. Three-dimensional finite element analysis of cold expansion of adjacent holes. Int J Mech Sci 1998, 40:1019-1028.
28. Chakherlou T.N., Vogwell J. The effect of cold expansion on improving the fatigue life of fastener holes. Eng Fail Anal 2003, 10:13-24.
29. De Matos P.F.P., McEvily A.J., Moreira P.M.G.P., De Castro P.M.S.T. Analysis of the effect of cold-working of rivet holes on the fatigue life of an aluminium alloy. Int J Fatigue 2007, 29:575-586.
30. Ismonov S., Daniewicz S.R., Newman J.C., Hill M.R., Urban M.R. Three dimensional finite element analysis of a split-sleeve cold expansion process. J Eng Mater Technol 2009, 131:31007-31014.
31. Liu Y.S., Gou B.W., Shao X.J., Jiang Z.F., Yue Z.F. Effect of thickness on residual stress fields of cold expansion hole. Adv Mater Res 2010, 97:601-604.
32. Nishikawa M., Soyama H. Two-step method to evaluate equibiaxial residual stresses of metal surface based on micro-indentation tests. Mater Des 2011, 32:3240-3247.
33. Chakherlou T.N., Aghdam A.B. An experimental investigation on the effect of short time exposure to elevated temperature on fatigue life of cold expanded fastener holes. Mater Des 2008, 29:1504-1511.
34. Aghdam A.B., Chakherlou T.N., Saeedi K. An FE analysis for assessing the effect of short-term exposure to elevated temperature on residual stresses around cold expanded fastener holes in aluminium alloy 7075-T6. Mater Des 2010, 31:500-507.
35. Chakherlou T.N., Aghdam A.B., Akbari A., Saeedi K. Analysis of cold expanded fastener holes subjected to short time creep: finite element modelling and fatigue tests. Mater Des 2010, 31:2858-2866.
36. Liu J., Xu H.L., Zhai H.B., Yue Z.F. Effect of detail design on fatigue performance of fastener hole. Mater Des 2010, 31:976-980.
37. Chakherlou T.N., Shakouri M., Aghdam A.B., Akbari A. Effect of cold expansion on the fatigue life of Al 2024-T3 in double shear lap joints: experimental and numerical investigations. Mater Des 2012, 33:185-196.
38. Dowling N.E. Mechanical behavior of materials 1999, Prentice-Hall International. 2nd ed.
39. Ariffin A.K., Al-Asady N.A., Beden S.M., Abdullah S. Fatigue crack growth simulation of aluminium alloy under spectrum loadings. Mater Des 2010, 31:3449-3456.
40. Chakherlou T.N., Alvandi-Tabrizi Y., Kiani A. On the fatigue behavior of cold expanded fastener holes subjected to bolt tightening in single plate. Int J Fatigue 2011, 33:800-810.
41. Chakherlou T.N., Oskouei R.H., Vogwell J. Experimental and numerical investigation of the effect of clamping force on the fatigue behaviour of bolted plates. Eng Fail Anal 2008, 15:563-574.
42. ANSYS Release 11.0 Documentation, ANSYS Inc.; 2008.
43. Liu Y.S., Shao X.J., Liu J., Yue Z.F. Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole. Mater Des 2010, 31:1208-1215.
44. Zhang Y., Fitzpatrick M.E., Edwards L. Analysis of the residual stress around a cold-expanded fastener hole in a finite plate. Strain 2005, 41:59-70.
45. Ozdemir A.T., Hermann R. Effect of expansion technique and plate thickness on near-hole residual stresses and fatigue life of cold expanded holes. J Mater Sci 1999, 34:1243-1252.
46. Chakherlou T.N., Abazadeh B., Vogwell J. The effect of bolt clamping force on the fracture strength and the stress intensity factor of a plate containing a fastener hole with edge cracks. Eng Fail Anal 2009, 16:242-253.
47. Brown A.M., Straznicky P.V. Simulating fretting contact in single lap splices. Int J Fatigue 2009, 31:375-384.