-
2
-
-
72649089765
-
Effect of corrosion severity on fatigue evolution in Al-Zn-Mg-Cu
-
J.T. Burns, S. Kim, and R.P. Gangloff Effect of corrosion severity on fatigue evolution in Al-Zn-Mg-Cu Corrosion Science 52 2010 498 508
-
(2010)
Corrosion Science
, vol.52
, pp. 498-508
-
-
Burns, J.T.1
Kim, S.2
Gangloff, R.P.3
-
4
-
-
53849098907
-
The effect of bolt clamping force on the fracture strength and the stress intensity factor of a plate containing a fastener hole with edge cracks
-
T.N. Chakherlou, B. Abazadeh, and J. Vogwell The effect of bolt clamping force on the fracture strength and the stress intensity factor of a plate containing a fastener hole with edge cracks Eng. Fail. Anal. 16 2009 242 253
-
(2009)
Eng. Fail. Anal.
, vol.16
, pp. 242-253
-
-
Chakherlou, T.N.1
Abazadeh, B.2
Vogwell, J.3
-
5
-
-
77955341877
-
An investigation about interference fit effect on improving fatigue life of a holed single plate in joints
-
10.1016/j.euromechsol.2009.12.009
-
T.N. Chakherlou, M. Mirzajanzadeh, B. Abazadeh, and K. Saeedi An investigation about interference fit effect on improving fatigue life of a holed single plate in joints Eur. J. Mech. A Solids 2010 10.1016/j.euromechsol.2009. 12.009
-
(2010)
Eur. J. Mech. A Solids
-
-
Chakherlou, T.N.1
Mirzajanzadeh, M.2
Abazadeh, B.3
Saeedi, K.4
-
6
-
-
67649576321
-
Effect of hole lubrication on the fretting fatigue life of double shear lap joints: An experimental and numerical study
-
T.N. Chakherlou, M. Mirzajanzadeh, and J. Vogwell Effect of hole lubrication on the fretting fatigue life of double shear lap joints: An experimental and numerical study Eng. Fail. Anal. 16 2009 2388 2399
-
(2009)
Eng. Fail. Anal.
, vol.16
, pp. 2388-2399
-
-
Chakherlou, T.N.1
Mirzajanzadeh, M.2
Vogwell, J.3
-
7
-
-
67649586382
-
Experimental and numerical investigations into the effect of an interference fit on the fatigue life of double shear lap joints
-
T.N. Chakherlou, M. Mirzajanzadeh, and J. Vogwell Experimental and numerical investigations into the effect of an interference fit on the fatigue life of double shear lap joints Eng. Fail. Anal. 16 2009 2066 2080
-
(2009)
Eng. Fail. Anal.
, vol.16
, pp. 2066-2080
-
-
Chakherlou, T.N.1
Mirzajanzadeh, M.2
Vogwell, J.3
-
8
-
-
38949149311
-
Experimental and numerical investigation of the effect of clamping force on the fatigue behaviour of bolted plates
-
DOI 10.1016/j.engfailanal.2007.04.009, PII S1350630707000830
-
T.N. Chakherlou, R.H. Oskouei, and J. Vogwell Experimental and numerical investigation of the effect of clamping force on the fatigue behaviour of bolted plates Eng. Fail. Anal. 15 2008 563 574 (Pubitemid 351223537)
-
(2008)
Engineering Failure Analysis
, vol.15
, Issue.5
, pp. 563-574
-
-
Chakherlou, T.N.1
Oskouei, R.H.2
Vogwell, J.3
-
9
-
-
0037295030
-
The effect of cold expansion on improving the fatigue life of fastener holes
-
DOI 10.1016/S1350-6307(02)00028-6, PII S1350630702000286
-
T.N. Chakherlou, and J. Vogwell The effect of cold expansion on improving the fatigue life of fastener holes Eng. Fail. Anal. 10 2003 13 24 (Pubitemid 36036326)
-
(2003)
Engineering Failure Analysis
, vol.10
, Issue.1
, pp. 13-24
-
-
Chakherlou, T.N.1
Vogwell, J.2
-
10
-
-
1942500999
-
A novel method of cold expansion which creates near uniform compressive tangential residual stress around a fastener holes
-
T.N. Chakherlou, and J. Vogwell A novel method of cold expansion which creates near uniform compressive tangential residual stress around a fastener holes Fatigue Fract. Eng. Mater. Struct. 27 2004 343 351
-
(2004)
Fatigue Fract. Eng. Mater. Struct.
, vol.27
, pp. 343-351
-
-
Chakherlou, T.N.1
Vogwell, J.2
-
12
-
-
58249141464
-
Validation of stress intensity factors of diametrically opposed corner cracks in a hole
-
S.A. Fawaz, and D. Hill Validation of stress intensity factors of diametrically opposed corner cracks in a hole Int. J. Fatigue 31 2009 712 718
-
(2009)
Int. J. Fatigue
, vol.31
, pp. 712-718
-
-
Fawaz, S.A.1
Hill, D.2
-
13
-
-
36248954472
-
Analysis and modelling of fatigue failure of friction stir welded aluminum alloy single-lap joints
-
DOI 10.1016/j.engfracmech.2007.04.013, PII S0013794407002275, International Conference in Crack Paths
-
D. Fersini, and A. Pirondi Analysis and modelling of fatigue failure of friction stir welded aluminum alloy single-lap joints Eng. Fract. Mech. 75 2008 790 803 (Pubitemid 350131441)
-
(2008)
Engineering Fracture Mechanics
, vol.75
, Issue.3-4
, pp. 790-803
-
-
Fersini, D.1
Pirondi, A.2
-
14
-
-
33746610588
-
Fretting fatigue analysis using a fracture mechanics based small crack growth prediction method
-
DOI 10.1016/j.triboint.2006.02.005, PII S0301679X0600079X
-
C. Giummarra, and J.R. Brockenbrough Fretting fatigue analysis using a fracture mechanics based small crack growth prediction method Tribol. Int. 39 2006 1166 1171 (Pubitemid 44148877)
-
(2006)
Tribology International
, vol.39
, Issue.10
, pp. 1166-1171
-
-
Giummarra, C.1
Brockenbrough, J.R.2
-
15
-
-
77949490149
-
Probabilistic fatigue life prediction using AFGROW and accounting for material variability
-
doi:10.1016/j.ijfatigue.2009.12.001
-
W.A. Grell, P.J. Laz, Probabilistic fatigue life prediction using AFGROW and accounting for material variability, Int. J. Fatigue, doi:10.1016/j. ijfatigue.2009.12.001.
-
Int. J. Fatigue
-
-
Grell, W.A.1
Laz, P.J.2
-
17
-
-
0033226867
-
Comparison of contemporary FCG life prediction tools
-
James A. Harter Comparison of contemporary FCG life prediction tools Int. J. Fatigue 21 1999 S181 S185
-
(1999)
Int. J. Fatigue
, vol.21
-
-
Harter, J.A.1
-
18
-
-
79955551384
-
AFGROW users guide and technical manual
-
J.A. Harter, AFGROW users guide and technical manual, AFRL-VA-WP-TR-2004-XXXX, 2004.
-
(2004)
AFRL-VA-WP-TR-2004-XXXX
-
-
Harter, J.A.1
-
20
-
-
0037099630
-
Utilization of partial crack closure for fatigue crack growth modeling
-
DOI 10.1016/S0013-7944(02)00005-X, PII S001379440200005X
-
D. Kujawski Utilization of partial crack closure for fatigue crack growth modeling Eng. Fract. Mech. 69 2002 1315 1324 (Pubitemid 34794225)
-
(2002)
Engineering Fracture Mechanics
, vol.69
, Issue.12
, pp. 1315-1324
-
-
Kujawski, D.1
-
21
-
-
2442718686
-
Crack-growth calculations in 7075-T7351 aluminum alloy under various load spectra using an improved crack-closure model
-
DOI 10.1016/j.engfracmech.2004.01.004, PII S0013794404000244
-
J.C. Newman Jr., A. Brot, and C. Matias Crack-growth calculations in 7075-T7351 aluminum alloy under various load spectra using an improved crack-closure model Eng. Fract. Mech. 71 2004 2347 2363 (Pubitemid 38662441)
-
(2004)
Engineering Fracture Mechanics
, vol.71
, Issue.16-17
, pp. 2347-2363
-
-
Newman Jr., J.C.1
Brot, A.2
Matias, C.3
-
22
-
-
34548021676
-
The stress-level effect on fatigue-crack growth under constant-amplitude loading
-
DOI 10.1016/j.ijfatigue.2006.11.003, PII S0142112306003227
-
J.C. Newman Jr., and J.J. Ruschau The stress-level effect on fatigue-crack growth under constant-amplitude loading Int. J. Fatigue 29 2007 1608 1615 (Pubitemid 47284407)
-
(2007)
International Journal of Fatigue
, vol.29
, Issue.9-11
, pp. 1608-1615
-
-
Newman Jr., J.C.1
Ruschau, J.J.2
-
23
-
-
70349197457
-
Reduction in clamping force due to applied longitudinal load to aerospace structural bolted plates
-
R.H. Oskouei, and T.N. Chakherlou Reduction in clamping force due to applied longitudinal load to aerospace structural bolted plates Aerospace Sci. Technol. 13 6 2009 325 330
-
(2009)
Aerospace Sci. Technol.
, vol.13
, Issue.6
, pp. 325-330
-
-
Oskouei, R.H.1
Chakherlou, T.N.2
-
24
-
-
0033097857
-
Effect of expansion technique and plate thickness on near-hole residual stresses and fatigue life of cold expanded holes
-
A.T. Ozdemir, and R. Hermann Effect of expansion technique and plate thickness on near-hole residual stresses and fatigue life of cold expanded holes J. Mater. Sci. 34 1999 1243 1252
-
(1999)
J. Mater. Sci.
, vol.34
, pp. 1243-1252
-
-
Ozdemir, A.T.1
Hermann, R.2
-
25
-
-
0032188380
-
Three-dimensional finite element analysis of cold expansion of adjacent holes
-
PII S0020740398000071
-
P. Papanikos, and S.A. Meguid Three-dimensional finite element analysis of cold expansion of adjacent holes Int. J. Mech. Sci. 40 10 1998 1019 1028 (Pubitemid 128416606)
-
(1998)
International Journal of Mechanical Sciences
, vol.40
, Issue.10
, pp. 1019-1028
-
-
Papanikos, P.1
Meguid, S.A.2
-
26
-
-
33847745306
-
Fatigue crack propagation from a cold-worked hole
-
DOI 10.1016/j.engfracmech.2006.08.006, PII S0013794406003195
-
S. Pasta Fatigue crack propagation from a cold-worked hole Eng. Fract. Mech. 74 2007 1525 1538 (Pubitemid 46381305)
-
(2007)
Engineering Fracture Mechanics
, vol.74
, Issue.9
, pp. 1525-1538
-
-
Pasta, S.1
-
28
-
-
85169018449
-
Fatigue analysis of cold worked and interference fit fastener holes
-
Cyclic Stress-Strain and Plastic Deformation Aspect of Fatigue Crack Growth, ASTM
-
D.L. Rich, and L.F. Impellizzeri Fatigue analysis of cold worked and interference fit fastener holes Cyclic Stress-Strain and Plastic Deformation Aspect of Fatigue Crack Growth STP vol. 637 1977 ASTM 154 175
-
(1977)
STP
, vol.637
, pp. 154-175
-
-
Rich, D.L.1
Impellizzeri, L.F.2
-
30
-
-
0036130568
-
Fatigue behaviour of aluminium alloy 7075 bolted joints treated with oily film corrosion compounds
-
PII S0261306901000607, Advances in production and processing of aluminium
-
K. Shankar, and R. Dhamari Fatigue behaviour of aluminium alloy 7075 bolted joints treated with oily film corrosion compounds Mater. Des. 23 2002 209 216 (Pubitemid 34249100)
-
(2002)
Materials and Design
, vol.23
, Issue.2
, pp. 209-216
-
-
Shankar, K.1
Dhamari, R.2
-
33
-
-
0014890104
-
A stress-strain function for the fatigue of metals
-
K.N. Smith, P. Watson, and T.H. Topper A stress-strain function for the fatigue of metals J. Mater. 5 4 1970 767 778
-
(1970)
J. Mater.
, vol.5
, Issue.4
, pp. 767-778
-
-
Smith, K.N.1
Watson, P.2
Topper, T.H.3
-
34
-
-
0035214016
-
Structural fatigue and joint degradation
-
H. Terada Structural fatigue and joint degradation Int. J. Fatigue 23 2001 21 30
-
(2001)
Int. J. Fatigue
, vol.23
, pp. 21-30
-
-
Terada, H.1
-
35
-
-
0242661877
-
Analysis of the fatigue life of riveted sheet metal helicopter airframe joints
-
M.R. Urban Analysis of the fatigue life of riveted sheet metal helicopter airframe joints Int. J. Fatigue 25 2003 1013 1026
-
(2003)
Int. J. Fatigue
, vol.25
, pp. 1013-1026
-
-
Urban, M.R.1
-
36
-
-
84897408147
-
Strengthening of riveted and bolted steel constructions under fatigue loading by preloaded fasteners experimental and theoretical investigations
-
Roanoke, USA
-
G. Valtinat, I. Hadrych, H. Huhn, Strengthening of riveted and bolted steel constructions under fatigue loading by preloaded fasteners experimental and theoretical investigations, in: Conference: Connections in Steel Structures IV, AISC and ECCS, Roanoke, USA, 2000.
-
(2000)
Conference: Connections in Steel Structures IV, AISC and ECCS
-
-
Valtinat, G.1
Hadrych, I.2
Huhn, H.3
-
37
-
-
70349200865
-
The effect of cold expansion on fatigue resistance of fastener hole
-
J. Vogwell, T.N. Chakherlou, J.M. Minguez, The effect of cold expansion on fatigue resistance of fastener hole, in: The 10th International Congress of Fracture, ICF10022OR, 2001.
-
(2001)
The 10th International Congress of Fracture, ICF10022OR
-
-
Vogwell, J.1
Chakherlou, T.N.2
Minguez, J.M.3
-
38
-
-
0242661843
-
Predicting fatigue crack growth life for cold-worked holes based on existing closed-form residual stress models
-
Z. Wang, and X. Zhang Predicting fatigue crack growth life for cold-worked holes based on existing closed-form residual stress models Int. J. Fatigue 25 2003 1285 1291
-
(2003)
Int. J. Fatigue
, vol.25
, pp. 1285-1291
-
-
Wang, Z.1
Zhang, X.2
-
39
-
-
0033362963
-
Experimental study on clamping effects on the tensile strength of composite plates with a bolt-filled hole
-
DOI 10.1016/S1359-835X(99)00002-0
-
Y. Yan, W.D. Wen, F.K. Chang, and P. Shyprykevich Experimental study on clamping effects on the tensile strength of composite plates with a bolt-filled hole Composites A 30 1999 1215 1229 (Pubitemid 30497898)
-
(1999)
Composites Part A: Applied Science and Manufacturing
, vol.30
, Issue.10
, pp. 1215-1229
-
-
Yan, Y.1
Wen, W.-D.2
Chang, F.-K.3
Shyprykevich, P.4
-
40
-
-
58149177307
-
Corrosion fatigue behavior of fastening hole structure and virtual crack propagation tests
-
Y. Zhang, X. Chang, G. Lv, H. Wang, Z. Li, and Y. Cheng Corrosion fatigue behavior of fastening hole structure and virtual crack propagation tests J. Univ. Sci. Technol. Beijing 15 5 2008 585 589
-
(2008)
J. Univ. Sci. Technol. Beijing
, vol.15
, Issue.5
, pp. 585-589
-
-
Zhang, Y.1
Chang, X.2
Lv, G.3
Wang, H.4
Li, Z.5
Cheng, Y.6
-
41
-
-
0242410096
-
Fatigue life improvement in fatigue-aged fastener holes using the cold expansion technique
-
X. Zhang, and Z. Wang Fatigue life improvement in fatigue-aged fastener holes using the cold expansion technique Int. J. Fatigue 25 2003 1249 1257
-
(2003)
Int. J. Fatigue
, vol.25
, pp. 1249-1257
-
-
Zhang, X.1
Wang, Z.2
|