Fatigue of structures and materials

Fatigue of Structures and Materials

Volumn , Issue , 2009, Pages 1-622

  Schijve, Jaap ^a  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84892193529     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-4020-6808-9     Document Type: Book

References (567)

1. Schütz, W., A history of fatigue. Engrg. Fracture Mech., Vol. 54 (1996), pp. 263-300.
2. Hanewinkel, D. and Zenner, H., Fatigue strength. A facsimile collection of historical papers until 1950. Technical University of Clausthal (1989) [historical papers in English and German].
3. Sanfor, R.J. (Ed.), Selected Papers on Foundations of Linear Elastic Fracture Mechanics. SEM Classic papers, Vol. CP1, SPIE Milestone Series, Vol. MS 137 (1997).
4. Mann, J.Y., Bibliography on the Fatigue of Materials, Components and Structures, Vols. 1 to 4. Pergamon Press, Oxford (1970, 1978, 1983 and 1990).
5. Schijve, J., Fatigue of structures and materials in the 20th century and the state of the art. Int. J. Fatigue, Vol. 25, No. 8 (2003), pp. 679-702.
6. Heywood, R.B., Designing against Fatigue. Chapman and Hall, London (1962).
7. Schijve, J., Predictions on fatigue life and crack growth as an engineering problem. A state of the art survey. Fatigue 96, Proc. 6th International Fatigue Congress, Berlin, Vol. II, G. Lütjering and H. Nowack (Eds.). Pergamon (1996), pp. 1149-1164.
8. Ewing, J.A. and Humfrey, J.C.W., The fracture of metals under repeated alternations of stress. Phil. Trans. Roy. Soc., Vol. A200 (1903), pp. 241-250.
9. Bullen, W.P., Head, A.K. and Wood, W.A., Structural changes during the fatigue of metals. Proc. Roy. Soc., Vol. A216 (1953), p. 332.
10. Forsyth, P.J.E., The Physical Basis of Metal Fatigue. Blackie and Son, London (1969).
11. Blom, A.E., Hedlund, A., Zhao, W., Fathalla, A., Weiss, B. and Stickler, R., Short fatigue crack growth in Al 2024 and Al 7475. Behaviour of Short Fatigue Cracks, Symp., September 1985, Sheffield. EGF 1, MEP (1986), pp. 37-66.
12. Cummings, H.N., Stulen, F.B. and Schulte, W.C., Tentative fatigue strength reduction factors for silicate-type inclusions in high-strength steels. Proc. ASTM, Vol. 58 (1958) pp. 505-514.
13. Murakami, Y., Takada, M. and Toriyama, T., Super-long life tension-compression fatigue properties of quenched and tempered 0.46% carbon steel. Int. J. Fatigue, Vol. 20 (1998), pp. 661-667.
14. Kung, C.Y. and Fine, M.E., Fatigue crack initiation and microcrack growth in 2024T4 and 2124-T4 aluminum alloys. Metall. Trans. A, Vol. 10A (1979), pp. 603-610.
15. Schijve, J., The practical and theoretical significance of small cracks. An evaluation. Fatigue 84. Proc. Int. Conf. on Fatigue Thresholds, Birmingham. EMAS (1984), pp. 751-771.
16. Forrest, P.G., Fatigue of Metals. Pergamon Press, Oxford (1962).
17. Ransom, J.T., The effect of inclusions on the fatigue strength of SAE 4340 steels. Trans. Am. Soc. Metals, Vol. 46 (1954), pp. 1254-1269.
18. Frost, N.E. and Phillips, C.E., Studies in the formation and propagation of cracks in fatigue specimens. Proc. Int. Conference on Fatigue of Metals, London, September 1956. The Institution of Mechanical Engineers (1956), pp. 520-526.
19. Frost, N.E., Marsh, K.J. and Pook, L.P., Metal Fatigue. Clarendon, Oxford (1974).
20. Kung, C.Y. and Fine, M.E., Fatigue crack initiation and microcrack growth in 2024T4 and 2124-T4 aluminum alloys. Metall. Trans. A, Vol. 10A (1979), pp. 603-609.
21. Sigler, D.,Montpetit, M.C. and Haworth,W.L., Metallography of fatigue crack initiation in an overaged highstrength aluminium alloy. Metall. Trans. A, Vol. 14A (1983), pp. 931-938.
22. Schijve, J., Fatigue predictions and scatter. Fatigue Fract. Engng. Mater. Struct., Vol. 17 (1994), pp. 381-396.
23. de Forest, A.V., The rate of growth of fatigue cracks. J. Appl. Mech., Vol. 3 (March 1936), pp. A-23 to A-25.
24. Zappfe, C.A. and Worden, C.O., Fractographic registrations of fatigue. Trans. Am. Soc. Metals, Vol. 43 (1951), pp. 958-969.
25. Forsyth, P.J.E. and Ryder, D.A., Some results of the examination of aluminium alloy specimen fracture surfaces. Metallurgia, Vol. 63 (1961), pp. 117-124.
26. McMillan, J.C. and Pelloux, R.M.N., Fatigue crack propagation under program and random loading. Fatigue Crack Propagation, ASTM STP 415 (1967), pp. 505-535.
27. Laird, C., The influence of metallurgical structure on the mechanisms of fatigue crack propagation. Fatigue Crack Propagation, ASTM STP 415 (1967), pp. 131-180.
28. Bowles, C.Q. and Schijve, J., Crack tip geometry for fatigue cracks grown in air and vacuum. Advances in Quantitative Measurement of Physical Damage. ASTM STP 811 (1983), pp. 400-426.
29. Scheerder, C., The danger of single corrosion pits with respect to fatigue. Master Thesis, Faculty of Aerospace Engineering, Delft University of Technology (1992).
30. Zhou, S. and Turnbull, A., Influence of pitting on the fatigue life of a turbine blade steel. Fatigue Fract. Engng. Mater. Struct., Vol. 22 (1999), pp. 1083-1093.
31. Endo, K. and Miyao, Y., Effects of cycle frequency on the corrosion fatigue strength. Bull. Japan Soc. Mech. Engrs., Vol. 1 (1958), pp. 374-380.
32. Barsom, J.M., Effect of cyclic stress form on corrosion fatigue crack propagation below KIscc in a high yield strength steel. Corrosion Fatigue: Chemistry, mechanics and Microstructure, O.F. Devereux, A.J. McEvily and R.W. Staehle (Eds.), Vol. NACE-2. National Association of Corrosion Engineers, Houston (1972), pp. 424-436.
33. Broek, D., Accident investigation. Report of the National Aerospace Laboratory NLR, Amsterdam.
34. Schijve, J., Fatigue crack propagation in light alloys. National Aerospace Laboratory NLR, Amsterdam, Report M.2010 (1956).
35. Murakami, Y., Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions. Elsevier (2002).
36. Suresh, S., Fatigue of Materials, 2nd edn. Cambridge University Press, Cambridge (1998).
37. Miller, K.J., The three thresholds for fatigue crack propagation. ASTM STP 1296, R.S. Piascik, J.C. Newman, and N.E. Dowling (Eds.). ASTM (1997), pp. 267-286.
38. Fatigue and Fracture. American Society for Materials, Handbook Vol. 19, ASM International (1996).
39. Carpinteri, A., Handbook of Fatigue Cracking - Propagation in Metallic Structures. Elsevier, Amsterdam (1994).
40. Fractography. American Society for Materials, Handbook Vol. 12. ASM International (1987).
41. Ritchie, R.O. and Lankford, J. (Eds.), Small Fatigue Cracks. Proc. 2nd Engineering Foundation Int. Conf., 1986. The Metallurgical Society (1986).
42. Miller, K.J. and de los Rios, E.R. (Eds.), The Behaviour of Short Fatigue Cracks. EGF Publication 1, Mechanical Engineering Publications, London (1986).
43. Fuchs, H.O. and Stephens, R.I., Metal Fatigue in Engineering. John Wiley & Sons (1980).
44. Klesnil, M. and Lukás, P., Fatigue of Metallic Materials, 2nd edn. Elsevier, Amsterdam (1992).
45. Fong, J.T. (Ed.), Fatigue Mechanisms. ASTM STP 675 (1979).
46. Kocanda, S. Fatigue Failure of Metals. Sijthoff & Noordhoff (1978).
47. Peterson, R.E., Stress Concentration Factors. John Wiley & Sons, New York (1974).
48. New edition by Pilkey, W.D. and Pilkey, D.F., Peterson's Stress Concentration Factors, 3rd rev. edn., John Wiley & Sons (2008).
49. Timoshenko, S. and Goodier, J.N., Theory of Elasticity, 3rd edn.). McGraw Hill (1987).
50. Muskhelisvili, N.I., Some Basic Problems of the Mathematical Theory of Elasticity. Noordhoff (1963).
51. Stress Concentration Factors. ESDU Engineering Data, Structures, Vol. 7, Issued 1964 to 1995. Engineering Sciences Data Unit, London.
52. Schijve, J., Stress gradients around notches. Fatigue Engrg. Mater. Struct., Vol. 3 (1981), pp. 325-338.
53. Howland, R.C.J., On the stress in the neighbourhood of a circular hole in a strip under tension. Phil. Trans. Roy. Soc., Vol. 229 (1930), pp. 49-86.
54. Heywood, R.B., Designing against Fatigue. Chapman and Hall, London (1962).
55. Frocht, M.M. and Hill, H.N., Stress concentration factors around a central circular hole in a plate loaded through pin in the hole. J. Appl. Mech., Vol. 7 (1940), pp. A5-A9.
56. Frost, N.E., Marsh, K.J. and Pook, L.P., Metal Fatigue. Clarendon, Oxford (1974).
57. Heywood, R.B., Designing by Photo-Elasticity. Chapman and Hall, London (1952)
58. and Photo-Elasticity for Designers. Pergamon Press (1969).
59. Durelli, A.J., Phillips, E.A. and Tsao, C.H., Theoretical and Experimental Analysis of Stress and Strain. McGraw-Hill (1958).
60. Nisitani, H. and Noda, N.-A., Stress concentration of a cylindrical bar with a V-shaped circumferential groove under torsion tension or bending. Engrg. Fracture Mech., Vol. 20 (1984), pp. 743-766.
61. Nisitani, H. and Noda, N.-A., Stress concentration of a strip with double edge notches under tension or in-plane bending. Engrg. Fracture Mech., Vol. 23 (1986), pp. 1051-1065.
62. See also: Engrg. Fracture Mech., Vol. 28 (1987), pp. 223-238 for a single edge notch.
63. Gooyer, L.E. and Overbeeke, J.L., The stress distributions in shouldered shafts under axisymmetric loading. J. Strain Anal., Vol. 26 (1991), pp. 181-184.
64. Noda, N.-A., Takase, Y. and Monda, K., Stress concentration factors for shoulder fillets in round and flat bars under various loads. Int. J. Fatigue, Vol. 19 (1997), pp. 75-84.
65. Ostermann, H., Stress concentration factors of plate specimens for fatigue tests. Laboratorium für Betriebsfestigkeit, LBF, Darmstadt, Report TM Nr. 61/71 (1971) [in German].
66. Sih, G.C., Stress Analysis of Notch Problems. Mechanics of Fracture, Vol. 5. Noordhoff (1978).
67. Nisitani, H. (Ed.), Computational and Experimental Fracture Mechanics. Computational Mechanics Publications, Southampton (1994).
68. Leven, M.M., Stress gradients in grooved bars and shafts. Proc. SESA, Vol. 13 (1955), pp. 207-213.
69. Savin, G.N., Stress distribution around holes. NASA TT F-607 (1970) [translated from Russian].
70. Neuber, H., Kerbspannungslehre. Springer, Berlin (1937).
71. Translation: Theory of Notch Stresses. J.W. Edwards, Ann Arbor, Michigan (1946).
72. Marsh, K.J. (Ed.), Shot Peening: Techniques and Applications. EMAS, Warley, UK (1993).
73. Lessels, J.M. and Broderick, A.G., Shot-peening as protection of surface damaged propeller-blade materials. Proc. Int. Conf. on Fatigue of Metals, London 1956. The Institute of Mechanical Engineers, London (1956), pp. 617-627.
74. Neuber, H., Theory of stress concentration for shear strained prismatical bodies with arbitrary nonlinear stress-strain law. Trans. ASME. J. Appl. Mech., Vol. 28 (1961), pp. 544-550.
75. Glinka, G., Relations between the Strain Energy Density Distribution and Elastic-Plastic Stress-Strain Fields near Cracks and Notches and Fatigue Life Calculations. ASTM STP 942 (1988), pp. 1022-1047. Some general references
76. Rice, C.R. (Ed.), SAE Fatigue Design Handbook, 3rd edn. AE-22, Society of Automotive Engineers, Warrendale (1997).
77. Champoux, R.L., Underwood, J.H. and Kapp, J.A. (Eds.), Analytical and Experimental Methods for Residual Stress Effects in Fatigue. ASTM STP 1004 (1989).
78. Niku-Lari, A. (Ed.), Advances in Treatments: Technology - Applications - Effects, Vol. 4: Residual Stresses. Pergamon Press, Oxford (1987).
79. Frost, N.E., Marsh, K.J. and Pook, L.P., Metal Fatigue. Clarendon, Oxford (1974).
80. Forrest, P.G., Fatigue of Metals. Pergamon Press, Oxford (1962).
81. Irwin, G.R., Analysis of stresses and strains near the end of a crack traversing a plate. Trans. ASME, J. Appl. Mech., Vol. 24 (1957), pp. 361-364.
82. Westergaard, H.M., Bearing pressures and cracks. J. Appl. Mech., Vol. 6 (1939), pp. A-49 to A-53.
83. Rooke, D.P. and Cartwright, D.J., Stress Intensity Factors. Her Majesty's Stationary Office, London (1976).
84. Tada, H., Paris, P.C. and Irwin, G.R., The Stress Analysis Handbook, 2nd edn. Paris Productions Inc., St. Louis (1985).
85. Murakami, Y. (Ed.), Stress Intensity Factors Handbook. Pergamon Press, Oxford (1987).
86. Standard TestMethod for Measurement of Fatigue Crack Growth Rates. ASTMStandard E647-91a (1991).
87. Feddersen, C.E., Discussion in ASTM STP 410 (1966), pp. 77-79.
88. Newman Jr., J.C., An Improved Method of Collocation for the Stress Analysis of Cracked Plates with Various Shaped Boundaries, NASA Report TN D-6376 (1971).
89. Swift, T., The effects of stress level, geometry, and material on fatigue damage tolerance of pressurized fuselage structure. Plantema Memorial Lecture, Proc. 14th ICAF Symp., Ottawa, EMAS (1987), pp. 177.
90. Tweed, J. and Rooke, D.P., The distribution of the stress near the tip of a radial crack at the edge of a circular hole. Int. J. Engrg. Sci., Vol. 11 (1973), pp. 1185-1195.
91. Schijve, J., Fatigue specimens for sheet and plate material. Fatigue Fract. Engng. Mater. Struct., Vol. 21 (1998), pp. 347-357.
92. Sneddon, I.N., The distribution of stress in the neighbourhood of a crack in an elastic solid. Proc. Roy. Soc. London, A, Vol. 187 (1946), pp. 229-260.
93. Irwin, G.R., The crack extension force for a part-through crack in a plate. Trans. ASME, J. Appl. Mech., Vol. 29 (1962), pp. 651-654.
94. Raju, I.S. and Newman, J.C., Stress-intensity factors for a wide range of semi-elliptical surface cracks in finite-thickness plates. Engrg. Fracture Mech., Vol. 11 (1979), pp. 817-829.
95. Dugdale, D.S., Yielding of steel sheets containing slits. J. Mech. Phys. Solids, Vol. 8 (1960), pp. 100-104.
96. Griffith, A.A., The theory of rupture. Proc. First Int. Conf. for Applied Mechanics, Delft 1924. C.B. Biezeno and J.M. Burgers (Eds.), Waltman, Delft (1925).
97. Miyake, S., Nawa, Y., Kondo, Y. and Endo, T., Application of the "K-gage"to aircraft structural testing. Proc. 15th ICAF Symposium, Jerusalem, June 1989, A. Berkovits (Ed.). EMAS Warley (1989), pp. 369-394.
98. Sanfor, R.J. (Ed.), Selected papers on Foundations of linear elastic fracture mechanics. SEM Classic papers, Vol. CP1, SPIE Milestone Series, Vol. MS 137 (1997).
99. Anderson, T.L., Fracture Mechanics: Fundamentals and Applications, 2nd edn. CRC Press (1995).
100. Nisitani, H. (Ed.), Computational and experimental fracture mechanics. Computational Mechanics Publications, Southampton (1994).
101. Carpinteri, A., Handbook of Fatigue Crack Propagation inMetallic Sstructures. Elsevier, Amsterdam (1994).
102. Broek, D., Elementary Engineering Fracture Mechanics, 4th edn.). Martinus Nijhoff Publishers, the Hague (1985).
103. Ewalds, H.L. and Wanhill, R.J.H., Fracture Mechanics. Edward Arnold (1983).
104. Sih, C.M., Handbook of Stress Intensity Factors. Lehigh University (1973).
105. Paris, P.C. and Sih, C.M., Stress analysis of cracks. ASTM STP 381 (1965), pp. 30-83.
106. Schijve, J., Significance of fatigue cracks in micro-range and macro-range. Fatigue Crack Propagation, ASTM-STP 415 (1967), pp. 415-459.
107. Grover, H.J., Bishop, S.M. and Jackson, L.R., Fatigue strength of aircraft materials. Axial load fatigue tests on unnotched sheet specimens of 24S-T3, 75S-T6 aluminum alloys and of SAE 4130 steel. NACA TN 2324 (1951).
108. Grover, H.J., Fatigue of Aircraft Structures. U.S. Government Printing Office (1966).
109. Forrest, P.G., Fatigue of Metals. Pergamon Press, Oxford (1962).
110. Schütz,W., View points of material selection for fatigue loaded structures. Laboratorium für Betriebsfestigkeit LBF, Darmstadt, Bericht Nr. TB-80 (1968) [in German].
111. Buch, A., Evaluation of size effects in fatigue tests on unnotched specimens and components. Arch. Eisenhüttenwesen, Vol. 43 (1972), pp. 885-900 [in German].
112. Kloos, K.H., Buch, A. and Zankov, D., Pure geometrical size effect in fatigue tests with constant stress amplitude and in programme tests. Zeitschr.Werkstoftechn., Vol. 12 (1981), pp. 40-50.
113. Smith, J.O., Effect of range of stress on fatigue strength. University of Illinois, Engrg. Expt. Station Bulletin 334 (1942).
114. Leger, J., Fatigue life testing of crane drive shafts under crane-typical torsional and rotary bending loads. Schenck Hydropuls Mag., Issue 1/89 (1989), pp. 8-11.
115. Gough, H.J. and Pollard, H.V., The strength of metals under combined alternating stresses. Proc. Inst. Mech. Engrs, Vol. 131 (1935), pp. 3-103.
116. Gough, H.J. and Pollard, H.V., Some experiments of the resistance of metals to fatigue under combined stresses. Min. of Supply, Aero Res. Council, RSM 2522, Part I (1951).
117. Ballard, P., Dang Van, K. Deperrois, A. and Papadopoulos, Y.V., High cycle fatigue and a finite element analysis. Fatigue Fracture Engrg. Mater. Struct., Vol. 18 (1995), pp. 397-411.
118. Socie, D. and Marquis, G.B., Multiaxial Fatigue, John Wiley & Sons (1999).
119. Coffin Jr., L.F., Low cycle fatigue - A review. Appl. Mater. Res., Vol. 1, No. 3 (1962), p. 129.
120. Manson, S.S. and Hirschberg, M.H., Fatigue behavior in strain cycling in the low- and intermediate-cycle range. In Fatigue, An Interdisciplinary Approach, J.J. Burke, N.L. Reed and V. Weiss (Eds.). Syracuse University Press (1964), p. 133.
121. Coffin Jr., L.F. and Tavernelli, J.F., The cyclic straining and fatigue of metals. Trans. Metall. Soc. AIME, Vol. 215 (1959), pp. 794-807.
122. Brose, W.R., Fatigue life predictions for a notched plate with analysis of mean stress and overstrain effects. In Fatigue under Complex Loading, R.M. Wetzel (Ed.). SAE Advanced in Engineering, Vol. 6 (1977), pp. 117-135.
123. Smith, R.W., Hirschberg, M.H. and Manson, S.S., Fatigue behavior of materials under stain cycling in low and intermediate life range. NASA TN D1574 (1963).
124. Graham, J.F., Fatigue Design Handbook. Soc. of Automotive Engineers (1968).
125. Sonsino, C.M., Course of S-N-curves especially in the high-cycle fatigue regime with regard to component design and safety. Int. J. Fatigue, Vol. 29 (2007), pp. 2246-2258.
126. Murakami, Y., Metal fatigue: Effects of small defects and nonmetallic inclusions. Elsevier (2002).
127. Stanzl-Tschegg, S.E. and Mayer, H.R., Fatigue in the very high cycle regime. Conference Proceedings. Institute of Meteorology and Physics, Vienna (2001).
128. Macha, E., Bedkowski, W. And Lagoda, T., Multiaxial Fatigue and Fracture. ESIS Publication 25, Elsevier (1999).
129. Suresh, S., Fatigue of Materials, 2nd edn. Cambridge University Press, Cambridge (1998).
130. Rice, C.R. (Ed.), SAE Fatigue Design Handbook, 3rd edn. AE-22, Society of Automotive Engineers, Warrendale (1997).
131. Hertzberg, R.W., Deformation and Fracture Mechanics of Engineering Materials, 4th edn. John Wiley & Sons, New York (1996).
132. Shiozawa, K. and Sakai, T. (Eds.), Data Book on Fatigue Strength of Metallic Materials. 3 Volumes. Elsevier, Amsterdam (1996).
133. Fatigue and Fracture. American Society for Materials, Handbook Vol. 19, ASM (1996).
134. Fatigue Data Book: Light Structural Alloys. ASM International (1995).
135. Dowling, N.E., Mechanical Behavior of Materials. Engineering Methods for Deformation, Fracture, and Fatigue, 3rd edn. Prentice-Hall (2006).
136. McDowell, D.L. and Rod, E. (Eds.), Advances in Multiaxial Fatigue. ASTM STP 1191 (1993).
137. Blom, A.F. and Beevers, C.J. (Eds.), Theoretical Concepts and Numerical Analysis of Fatigue. Proc. Conf. May 1992, Birmingham. EMAS (1992).
138. Klesnil, M. and Lukás, P., Fatigue of Metallic Materials, 2nd edn. Elsevier, Amsterdam (1992).
139. Brown, M.W. and Miller, K.J. (Eds), Biaxial and Multiaxial Fatigue. EGF Publication 3. Mechanical Engineering Publications (1989).
140. Boller, Chr. and Seeger, T., Materials Data for Cyclic Loading. Materials Science Monographs, 42, 5 Volumes. Elsevier, Amsterdam (1987).
141. Boyer, H.E., Atlas of Fatigue Curves. Amer. Soc. for Metals (1986).
142. Miller, K.J. and Brown, M.W. (Eds.), Multiaxial fatigue. ASTM STP 853 (1985).
143. Frost, N.E., Marsh, K.J. and Pook, L.P., Metal Fatigue. Clarendon, Oxford (1974).
144. Stephens, R.I., Fatemi, A., Stephens, R.R. and Fuchs, H.O., Metal Fatigue in Engineering, 2nd edn. John Willey & Sons (2000).
145. Peterson, R.E., Stress Concentration Factors. John Wiley & Sons, New York (1974).
146. Neuber, H., Kerbspannungslehre. Springer, Berlin (1937) (2nd edn., 1958).
147. Translation: Theory of Notch Stresses. J.W. Edwards, Ann Arbor, Michigan (1946).
148. Kuhn, P. and Hardrath, H.F., An engineering method for estimating notch-size effect in fatigue tests of steel. Report NACA TN 2805 (1952).
149. Siebel, E. and Stieler, M., Significance of dissimilar stress distributions for cyclic loading. Zeitschr. VDI, Vol. 97 (1955), pp. 146-148 [in German].
150. Phillips, C.E. and Heywood, R.B., Size effect in fatigue of plain and notched steel specimens. Proc. Inst. Mech. Engrs., Vol. 165 (1951), pp. 113-124.
151. Landers, C.B. and Hardrath, H.F., Results of axial-load fatigue tests on electropolished 2024-T3 and 7075-T6 aluminum-alloy-sheet specimens with central holes. Report NACA TN 3631 (1956).
152. Grover, H.J., Bishop, S.M. and Jackson, L.R., Fatigue strengths of aircraft materials. Axial load fatigue tests on notched sheet specimens of 24S-T3 and 75S-T6 alumimum alloys and of SAE 4130 steel. Report NACA TN 2324 (1951).
153. Grover, H.J., Bishop, S.M. and Jackson, L.R., Fatigue strengths of aircraft materials. Axial load fatigue tests on notched sheet specimens of 24S-T3 and 75S-T6 alumimum alloys and of SAE 4130 steel with stress-concentration factors of 2.0 and 4.0. Report NACA TN 2389 (1951).
154. Dang-Van, K., Macro-micro approach in high-cycle mutiaxial fatigue. Advances in multiaxial fatigue. ASTM STP 1191, McDoell, D.L. and Ellis, R. (Eds.) (1993), pp. 120-130.
155. Juvinall, R.C., Engineering Considerations of Stress, Strain and Strength. McGraw-Hill, New York (1967).
156. SAE Fatigue Design Handbook, 3rd edn. AE-22, Society of Automotive Engineers, Warrendale (1997).
157. Fatigue Data Book: Light Structural Alloys. ASM International (1995).
158. Standard test method for measurement of fatigue crack growth rates. ASTM Standard E64791 (1991).
159. Paris, P.C., Gomez, M.P. and Anderson, W.E., A rational analytical theory of fatigue. The Trend of Engineering, Vol. 13 (1961), pp. 9-14.
160. Schijve, J., Fatigue crack propagation and the stress intensity factor. Faculty of Aerospace Engineering, Delft, Memorandum M-191 (1973).
161. Figge, I.E. and Newman, Jr, J.C., Fatigue-crack-propagation behavior in panels with simulated rivet forces. NASA TN D-4702 (1968).
162. Schijve, J., Significance of fatigue cracks in micro-range and macro-range. ASTM-STP 415, (1967) pp. 415-459.
163. Wanhill, R.J.H., Durability analysis using short and long fatigue crak growth data. Aircraft Damage Assessment and Repair. The Institution of Engineering, Australia (1991). Barton, Australia.
164. Paris, P.C. and Erdogan, F., A critical analysis of crack propagation laws. Trans. ASME, Series D, Vol. 85 (1963), pp. 528-535.
165. Forman, R.G., Kearney, V.E. and Engle, R.M., Numerical analysis of crack propagation in cyclic-loaded structures. J. Basic Engrg., Trans. ASME, Vol. D89 (1967), pp. 459-464.
166. Priddle, E.K., High cycle fatigue crack propagation under random and constant amplitude loadings. Int. J. Pressure Vessels & Piping, Vol. 4 (1976), p. 89.
167. Klesnil, M. and Lukáš, P., Influence of strength and stress history on growth and stabilization of fatigue cracks. Engrg. Fracture Mech., Vol. 4 (1972), pp. 77-92.
168. Elber, W., The significance of fatigue crack closure. Damage tolerance in aircraft structures. ASTM STP 486 (1971), pp. 230-242.
169. Rice, J.R., The mechanics of crack tip deformation and extension by fatigue. Fatigue crack propagation. ASTM STP 415 (1967), pp. 247-309.
170. Schijve, J., Some formulas for the crack opening stress level. Engrg. FractureMechanics, Vol. 14 (1981), pp. 461-465.
171. Van der Linden, H.H., NLR test results as a database to be used in a check of crack propagation prediction models. A Garteur activity. Nat. Aerospace Lab. NLR, TR 79121U, Amsterdam (1979).
172. Schijve, J., Fatigue crack closure observations and technical significance. Mechanics of Fatigue Crack Closure, Int. Symp., Charleston 1986. ASTM STP 982 (1988), pp. 5-34.
173. Ewalds, H.L. and Furnee, R.T., Crack closure measurements along the crack front in center cracked specimens. Int. J. Fracture, Vol. 14 (1978), pp. R53-R55.
174. Sunder, R. and Dash, P.K., Measurement of fatigue crack closure through electron microscopy. Int. J. Fatigue, Vol. 4 (1982), pp. 97-105.
175. Ritchie, R.O., Mechanisms of fatigue crack propagation in metals, ceramics and composites: Role of crack tip shielding. Mater. Sci. Engrg., Vol. A103 (1988), pp. 15-28.
176. Broek, D. and Schijve, J., The influence of the mean stress on the propagation of fatigue cracks in aluminium alloy sheet. Nat. Aerospace Lab. NLR, Report TR M.2111, Amsterdam (1963).
177. Crooker, T.W., The role of fracture toughness in low-cycle fatigue crack propagation for high-strength alloys. Engrg. Fracture Mech., Vol. 5 (1973), pp. 35-43.
178. Stephens, R.R., Stephens, R.I., Veit, A.L. and Albertson, T.P., Fatigue crack growth of Ti-62222 alloy under constant amplitude and mini-TWIST flight spectra at 25°C and 175°C. Int. J. Fatigue, Vol. 19 (1997), pp. 301-308.
179. Houdijk, P.A., Effect of specimen thickness and specimen geometry on fatigue crack growth in Fe510Nb. Faculty of Chemistry and Materials, Delft University of Technology (1993) [in Dutch].
180. Song-Hee Kim and Weon-Pil Tai, Retardation and arrest of fatigue crack growth in AISI 4340 steel by introducing rest periods and overloads. Fatigue Fracture Engrg. Mater. Structure, Vol. 15 (1992), pp. 519-530.
181. Liaw, P.K., Peck, M.G. and Rudd, G.E., Fatigue crack growth behavior of D6AC space shuttle steel. Engrg. Fracture Mech., Vol. 43 (1992), pp. 379-400.
182. Newman, J.C., Jr. and Raju, I.S., Stress-intensity factor equation for crack in three-dimensional finite bodies subjected to tension and bending loads. Fracture Mechanics, ASTM STP 791, Vol. 1 (1983), pp. 238-265.
183. Petrak, G.S., Strength level effects on fatigue crack growth and retardation. Engrg. Fracture Mech., Vol. 6 (1974), pp. 725-733.
184. Schijve, J. and De Rijk, P., The fatigue crack propagation in 2024-T3 Alclad sheet materials from seven different manufacturers. Nat. Aerospace Lab. NLR, Report TR M.2162, Amsterdam (1966).
185. Yoder, G.R., Cooley, L.A. and Crooker, T.W., The effect of load ratio on fatigue crack growth in Ti-8Al-1Mo-1V. Engrg. Fracture Mech., Vol. 17 (1983), pp. 185-188.
186. Kage, M., Miller, K.J. and Smith, R.A., Fatigue crack initiation and propagation in a low-carbon steel of two different grain sizes. Fatigue Fracture Engrg. Mater. Structure, Vol. 15 (1992), pp. 763-774.
187. Wanhill, R.J.H., Low stress intensity fatigue crack growth in 2024-T3 and T351. Engr. Fracture Mech., Vol. 30 (1988), pp. 233-260.
188. Stubbington, C.A. and Gunn, N.J.F., Effects of fatigue crack front geometry and crystallography on the fracture toughness of an Ti-6Al-4V alloy. Roy. Aero. Est., TR 77158, Farnborough (1977).
189. Pearson, S., Initiation of fatigue cracks in commercial aluminium alloys and the subsequent propagation of very short cracks. Engrg. Fracture Mech., Vol. 7 (1975), pp. 235-247.
190. Schijve, J. and Hoeymakers, A.H.W., Fatigue crack growth in lugs and the stress intensity factor. Fatigue Engrg. Mater. Structures, Vol. 1 (1979), pp. 185-201.
191. Poe, Jr., C.C., Fatigue crack propagation in stiffened panels. Damage tolerance in aircraft structures, ASTM STP 486 (1971), pp. 79-97.
192. Ichsan, S. Putra and Schijve, J., Crack opening stress measurements of surface cracks in 7075-T6 Al alloy plate specimens through electron fractography. Fatigue Fracture. Engrg. Mater. Structures, Vol. 15 (1992), pp. 323-338.
193. Lin, X.B. and Smith, R.A., Fatigue shape analysis for corner cracks at fastener holes. Engrg. Fracture Mech., Vol. 59 (1998), pp. 73-87.
194. Broek, D., The Practical Use of Fracture Mechanics. Kluwer Academic Publishers (1988).
195. Fawaz, S.A., Fatigue Crack Growth in Riveted Joints. Doctor Thesis, Delft University of Technology (1997).
196. Fawaz, S.A. and Andersson, B., Accurate stress intensity factor solutions for corner cracks at a hole. Engrg. Fracture Mech., Vol. 71 (2004), pp. 1235-1254.
197. Newman, J.C., Jr. and Raju, I.S., Stress-intensity factor equation for crack in three-dimensional finite bodies subjected to tension and bending loads. Fracture Mechanics, ASTM STP 791, Vol. 1 (1983), pp. 238-265.
198. Harter, J.A., AFGROW Users Guide and Technical Manual, AFGROW version 4.0012.15, AFRL-VA-WP-TR-2007 (2007).
199. Pook, L.P., Crack Paths. Wit Press, Southampton (2002).
200. Socie, D.F. and Marquis, G.B., Multiaxial Fatigue. Society of Automotive Engineers (1999).
201. Wang, S.-H. and Müller, C., A study on the change of fatigue fracture mode in two titanium alloys. Fatigue Fracture Engrg. Mater. Structure, Vol. 21 (1998), pp. 1077-1087.
202. De Freitas, M. and Francois, D., Analysis of fatigue crack growth in rotary bend specimens and railway axles. Fatigue Fracture Engrg. Mater. Structure, Vol. 18 (1995), pp. 171-178.
203. Carpinteri, A., Handbook of Fatigue Crack Propagation in Metallic Structures. Elsevier, Amsterdam (1994).
204. Blom, A.F. and Beevers, C.J. (Eds.), Theoretical Concepts and Numerical Analysis of Fatigue. Proc. Conf. May 1992, Birmingham. EMAS (1992).
205. Anderson, T.L., Fracture Mechanics: Fundamentals and Applications. CRC Press (1991).
206. Reuter, W., Underwood, J.H. and Newman, Jr., J.C. (Eds.), Surface-crack growth: Models, experiments, and structures. ASTM STP 1060 (1990).
207. Brown, M.W. and Miller, K.J. (Eds.), Biaxial and Multiaxial Fatigue. EGF Publication 3. Mechanical Engineering Publications (1989).
208. Newman, Jr., J.C. and Elber, W. (Eds.), Mechanics of Fatigue Crack Closure. ASTM STP 982 (1988).
209. Miller, K.J. and Brown, M.W. (Eds.), Multiaxial Fatigue. ASTM STP 853 (1985).
210. Pook, L.P., The Role of Crack Growth in Metal Fatigue. The Metals Society, London (1983).
211. ESDU Engineering Science Data. Fatigue-Fracture Mechanics Data. Vol. 2 (aluminium alloys) and Vol. 3 (Titanium alloys and steels). (1981-1999).
212. Fatigue Crack Propagation, ASTM STP 415 (1967).
213. Hudson, C.M. and Seward, S.K., A compendium of sources of fracture toughness and fatigue crack growth data for metallic alloys. Parts I, II and III. Int. J. Fracture, Vol. 14 (1978) pp. R151-R184
214. Vol. 20 (1982) pp. R59-R117
215. Vol. 39 (1989) pp. R43-R63.
216. McClung, R.C., The influence of applied stress, crack length, and stress intensity factor on crack closure. Metallurgical Trans., Vol. 22a (1991), pp. 1559-1571.
217. Wanhill, R.J.H., Microstructural influences on fatigue and fracture resistance in high strength structural materials. Engrg. Fracture Mech., Vol. 10 (1978), pp. 337-357.
218. Short Crack Growth Behaviour in Various Aircraft Materials, AGARD Report No. 767 (1990).
219. Schijve, J., Difference between the growth of small and large fatigue cracks. The relation to threshold K-values. Fatigue Thresholds, Fundamentals and Engineering Applications. Proc. Int. Conf. Stockholm 1981. EMAS Warley (1982), pp. 881-908.
220. Private information Mr. van Maarschalkerwaart, Dutch Railways.
221. Schijve, J. The analysis of random load-time histories with relation to fatigue tests and life calculations. Fatigue of Aircraft Structures, 2nd ICAF Symposium, W. Barrois and E.L. Ripley (Eds.). Pergamon Press (1963) pp. 115-149.
222. Haibach, E., Fischer, R., Schütz, W. and Hück, M., A standard random load sequence of Gaussian type recommended for general application in fatigue testing; its mathematical background and digital generation. In: Fatigue Testing and Design. Vol. 2, Soc., Environmental Engineers, London (1976), pp. 29.1-29.21.
223. Schütz, W., Standardized stress-time histories: An overview. Development of Fatigue Load Spectra, STP 1006, ASTM (1989), pp. 3-16.
224. Matsuishi, M. and Endo, T., Fatigue of metals subjected to varying stress - Fatigue lives under random loading. Preliminary Proc. of the Kyushu District Meeting, The Japan Society of Mechanical Engineers (1968), pp. 37-40 [in Japanese].
225. Burns, A., Fatigue loadings in flight: Loads in the tailplane and fin of a Varsity. A.R.C. Technical Report C.P.256. London (1956).
226. Dowling, N.E., Mechanical Behavior of Materials. Engineering Methods for Deformation, Fracture, and Fatigue, 3rd edn. Prentice Hall (2006).
227. Hillbery, B.M., Fatigue life of 2024-T3 aluminum alloy under narrow- and broad-band random loading. ASTM STP 462 (1970), pp. 167-183.
228. Rice, S.O., Mathematical analysis of random noise. Bell System Tech. Journal, Vols. 23 and 24, (1944 and 1945).
229. Buxbaum, O., Random load analysis as a link between operational stress measurement and fatigue life assessment. ASTM STP 671 (1979), pp. 5-20.
230. Griese, F.W., Schöne, G., Schütz,W. and Hück, M., Crack growth in torsion loaded axles of rolling machines during production. Stahl und Eisen, Vol. 99 (1979), pp. 193-198 [in German].
231. Weiss, M.P., Simulation and monitoring of loads in crane beams. ASTMSTP 671 (1979), pp. 208-221.
232. Yamada, K. and Miki, C., Recent research on fatigue of bridge structures in Japan. J. Construst. Steel Res., Vol. 13 (1989), pp. 211-222.
233. Schijve, J., Jacobs, F.A. and Tromp, P.J., Fatigue crack growth in aluminium alloy sheet material under flight-simulation loading. Effect of design stress level and loading frequency. Nat. Aerospace Lab. NLR, TR 72018, Amsterdam (1972).
234. de Jonge, J.B., Schütz, D., Lowak, H. and Schijve, J., A standardized load sequence for flight simulation tests on transport aircraft wing structures. Nat. Aerospace Lab. NLR, TR 72018, Amsterdam (1973).
235. Also: Laboratorium für Betriebsfestigkeit LBF, Bericht FB-106 (1973).
236. Murakami, Y., Mineki. K., Wakamatsu, T. and Morita, T., Data acquisition by a small portable strain histogram recorder (Mini-Rainflow Corder) and application to fatigue design of car wheels. Fatigue Design 1998, ESIS Publication 23, Elsevier (1999), pp. 373-383.
237. Heuler, P. and Schütz, W., Standardized load-time histories - Status and trends. In: Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials. Elsevier (1998), pp. 729-734.
238. Rice, C.R. (Ed.), SAE Fatigue Design Handbook, 3rd edn. AE-22, Society of Automotive Engineers, Warrendale (1997).
239. Murakami, Y. (Ed.), The Rainflow Method in Fatigue. The Tatsuo Endo Memorial Volume. Butterworth Heinemann (1992).
240. Potter, J.M. andWatanabe, R.T. (Eds.), Development of Fatigue Loading Spectra. ASTM STP 1006 (1989).
241. Buxbaum, O., Fatigue Strength in Service. Verlag Stahleisen mbH, Düsseldorf (1986) [in German].
242. Standard Practices for Cycle Counting in Fatigue Analysis. ASTM Standard E 1049-85 (1985).
243. Pålmgren, A., The fatigue life of ball-bearings, Z. VDI, Vol. 68 (1924), pp. 339-341 [in German].
244. Langer, B.F., Fatigue failure from stress cycles of varying amplitude. J. Appl. Mech., Vol. 4 (1937), pp. A160-A162.
245. Miner, M.A., Cumulative damage in fatigue. J. Appl. Mech., Vol. 12 (1945), pp. A159-A164.
246. Wållgren, G., Review of some Swedish investigations on fatigue during the period June 1959 to April 1961. Report FFA-TN-HE 879, Stockholm (1961).
247. Shanley, F.R., A proposed mechanism of fatigue failure. Colloquium on Fatigue, Stockholm, 1956. W. Weibull and F.K.G. Odquist (Eds.), Springer, Berlin (1956), pp. 251-259.
248. Schijve, J., Some remarks on the cumulative damage concept. Minutes 4th ICAF Conference, Zürich (1956), paper 2.
249. Schijve, J. and Jacobs, F.A., Fatigue tests on notched and unnotched clad 24 S-T sheet specimens to verify the cumulative damage hypothesis. Nat. Aerospace Laboratory, NLR, Amsterdam, Report M.1982 (1955).
250. Schijve, J., The endurance under program-fatigue testing. Full-Scale Fatigue Testing of Aircraft Structures. Proc. ICAF Symposium, Amsterdam 1959, Pergamon Press (1961), pp. 41-59.
251. Gassner, E., Strength experiments under cyclic loading in aircraft structures. Luftwissen, Vol. 6 (1939), pp. 61-64 [in German].
252. Naumann, E.C., Hardrath, H.R. and Guthrie, E.C., Axial load fatigue tests of 2024-T3 and 7075-T6 aluminum alloy sheet specimens under constant- and variable-amplitude loads. NASA Report TN D-212 (1959).
253. Jacoby, G.H., Comparison of fatigue lives under conventional program loading and digital random loading. Effects of Environmental and Complex Load History on Fatigue Life. ASTM TP 462 (1970), pp. 184-202.
254. Schütz, W., The prediction of fatigue life in the crack initiation and propagation stages. A state of the art survey. Engrg. Fracture Mech., Vol. 11 (1979), pp. 405-421.
255. Haibach, E., Modified linear damage accumulation hypothesis accounting for a decreasing fatigue strength during increasing fatigue damage. Laboratorium für Betriebsfestigkeit, LBF, Darmstadt, TM Nr. 50 (1970) [in German].
256. Dowling, N.E., Brose, W.R. and Wilson, W.K., Notched member fatigue life predictions by the local strain approach. Fatigue under Complex Loading: Analysis and Experiments, R.M. Wetzel (Ed.), Advances in Engineering, Vol. 7, SAE (1977), pp. 55-84.
257. Dowling, N.E., Mechanical Behavior of Materials. Engineering Methods for Deformation, Fracture, and Fatigue, 3rd edn. Prentice-Hall (2006).
258. Schütz, D. and Lowak, H., The application of the standardized test program for the fatigue life estimation of transport aircraft wing components. Proc. ICAF Symp., Lausanne, Paper 3.64 (1975).
259. Kirkby, W.T., Constant-amplitude of variable-amplitude test as a basis for design studies. Fatigue design procedures, ICAF Symp., 1965, Munich 1965, E. Gassner and W. Schütz (Eds.), Pergamon Press (1969), pp. 253-290.
260. Schijve, J., The significance or flight simulation fatigue tests. Durability and Damage Tolerance in Aircraft Design, ICAF Symp. Pisa, 1985, A. Salvetti and G. Cavallini (Eds.), EMAS, Warley (1985), pp. 71-170.
261. Lowak, H., Schütz, D., Hück, M. and Schütz, W., Standardized flight-simulation programme for fighters: FALSTAFF, LBF-Report 3045, IABG Report TF, 568 (1976) [in German].
262. Rice, C.R. (Ed.), SAE Fatigue Design Handbook, 3rd edn. AE-22, Society of Automotive Engineers, Warrendale (1997).
263. Schijve, J., The accumulation of fatigue damage in aircraft materials and structures. AGARDograph No. 157 (1972).
264. Schijve, J., Fatigue crack propagation in light alloy sheet material and structures. Advances in Aeronautical Sciences, Vol. 3, Pergamon Press (1961), pp. 387-408.
265. Schijve, J., Observations on the prediction of fatigue crack propagation under variable-amplitude loading. Fatigue Crack Growth under Spectrum Loads, ASTM STP 595 (1976), pp. 3-23.
266. Mills,W.J. and Hertzberg, R.W., The effect of sheet thickness on fatigue crack retardation in 2024-T3 aluminum alloy. Engrg. Fracture Mech., Vol. 7 (1975), pp. 705-711.
267. Petrak, G.S., Strength level effects on fatigue crack growth and retardation. Engrg. Fracture Mech., Vol. 6 (1974), pp. 725-733.
268. Dahl, W. and Roth, G., On the influence of overloads on fatigue crack propagation in structural steels. Paper Technical University Aachen (1979).
269. Ling, M.R. and Schijve, J., Fractographic analysis of crack growth and shear Lip development under simple variable-amplitude loading. Fatigue Fract. Engng Mater. Struct., Vol. 13 (1990), pp. 443-456.
270. Schijve, J., Four lectures on fatigue crack growth. Engrg. FractureMech., Vol. 11 (1979), pp. 176-221.
271. Chermahini, R.G., Shivakumar, K.N. and Newman, Jr., J.C., Three dimensional finite-element simulation of fatigue-crack growth and closure. Mechanics of Fatigue Crack Closure. J.C. Newman, Jr. and W. Elber (Eds.), ASTM STP 982 (1988), pp. 398-413.
272. Grandt, A.F., Three-dimensional measurements of fatigue crack closure. NASA-CR-175366, Washington (1984).
273. Sunder, R. and Dash, P.K., Measurement of fatigue crack closure through electron microscopy. Int. J. Fatigue, Vol. 4 (1982), pp. 97-105.
274. McEvily, A.J., Current Aspects of Fatigue. Appendix: Overload Experiments. Fatigue 1977 Conference, University of Cambridge (1977).
275. Schijve, J., Fatigue damage accumulation and incompatible crack front orientation. Engrg. Fracture Mech., Vol. 6 (1974), pp. 245-252.
276. Stubbington, C.A. and Gunn, N.J.F., Effects of fatigue crack front geometry and crystallography on the fracture toughness of an Ti-6Al-4V alloy. Roy. Aero. Est., TR 77158, Farnborough (1977).
277. Ryan, N.E., The influence of stress intensity history on fatigue-crack growth. Aero. Research Lab., Melbourne. Report ARL/Met. 92 (1973).
278. Schijve, J., Effect of load sequences on crack propagation under random and program loading. Engrg. Fracture Mech., Vol. 5 (1973), pp. 269-280.
279. Saff, C.R. and Holloway, D.R., Evaluation of crack growth gages for service life tracking. Fracture Mech., R. Roberts (Ed.), ASTM STP 743 (1981), pp. 623-640.
280. Schijve, J., Fundamental and practical aspects of crack growth under corrosion fatigue conditions. Proc. Inst. Mech. Engrs., Vol. 191 (1977), pp. 107-114.
281. Unpublished results, National Aerospace Laboratory NLR, Amsterdam.
282. Wanhill, R.J.H., The influence of starter notches on flight simulation fatigue crack growth. Nat. Aerospace Lab. NLR, Amsterdam, Report MP 95127 (1995).
283. Broek, D., Elementary Engineering Fracture Mechanics, 4th edn. Martinus Nijhoff Publishers, the Hague (1985).
284. Schijve, J., Vlutters, A.M., Ichsan, S.P. and ProvoKluit, J.C., Crack growth in aluminium alloy sheet material under flight-simulation loading. Int. J. Fatigue, Vol. 7 (1985), pp. 127-136.
285. Schijve, J., The significance of flight simulation fatigue tests. Durability and Damage Tolerance in Aircraft Design, A. Salvetti and G. Cavallini (Eds.), EMAS,Warley (1985), pp. 71-170.
286. Willenborg, J. Engle, R.M. and Wood, H.A., A crack growth retardation model using an effective stress concept. AFFDL-TR71-1, Air Force Flight Dynamic Laboratory, Wright-Patterson Air Force Base (1971).
287. Wheeler, O.E., Spectrum loading and crack growth. J. Basic Engrg., Vol. 94 (1972), pp. 181-186.
288. Baudin, G. and Robert, M., Crack growth life time prediction under aeronautical type loading. Proc. 5th European Conf. on Fracture, Lisbon (1984), pp. 779-792.
289. de Koning, A.U., A simple crack closure model for prediction of fatigue crack growth rates under variable-amplitude loading. Fracture Mechanics, R. Roberts (Ed.), ASTM STP 743 (1981), pp. 63-85.
290. Padmadinata, U.H., Investigation of crack-closure prediction models for fatigue in aluminum sheet under flight-simulation loading. Doctor Thesis, Delft University of Technology, Delft (1990).
291. Aliaga, D. Davy, A. and Schaff, H., A simple crack closure model for predicting fatigue crack growth under flight simulation loading. Durability and Damage Tolerance in Aircraft Design, A. Salvetti and G. Cavallini (Eds.). EMAS,Warley (1985), pp. 605-630.
292. Padmadinata, U.H. and Schijve, J., Prediction of fatigue crack growth under flight-simulation loading with the modified CORPUS model. Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance, C.E. Harris (Ed.). NASA Conf. Publ. 3274 (1994), pp. 547-562.
293. Ichsan S. Putra, Fatigue crack growth predictions of surface cracks under constant-amplitude and variable-amplitude loading. Doctor thesis, Delft University of Technology (1994).
294. Newman Jr., J.C. and Armen, H., Elastic-plastic analysis of a propagating crack under cyclic loading. AIAA J., Vol. 13 (1975), pp. 1017-1023.
295. Ohji, K., Ogura, K. and Ohkubo, Y., Cyclic analysis of a propagating crack and its correlation with fatigue crack growth. Engrg. Fracture Mech., Vol. 7 (1975), pp. 457-463.
296. Dugdale, D.S., Yielding of steel sheets containing slits. J. Mech. Phys. Solids, Vol. 8 (1960), pp. 100-104.
297. Führing, H. and Seeger, T., Structural memory of cracked components under irregular loading. FractureMechanics, C.W. Smith (Ed.). ASTMSTP 677 (1979), pp. 1144-1167.
298. Führing, H. and Seeger, T., Dugdale crack closure analysis of fatigue cracks under constant amplitude loading. Engrg. Fracture Mech., Vol. 11 (1979), pp. 99-122.
299. Dill, H.D. and Saff, C.R., Spectrum crack growth prediction method based on crack surface displacement and contact analysis. Fatigue Crack Growth under Spectrum Loads, ASTM STP 595 (1976) pp. 306-319.
300. Dill, H.D., Saff, C.R. and Potter, J.M., Effects of fighter attack spectrum and crack growth. Effects of Load Spectrum Variables on Fatigue Crack Initiation and Propagation, D.F. Bryan and J.M. Potter (Eds.). ASTM STP 714 (1980), pp. 205-217.
301. Newman, Jr., J.C., A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading. Methods and Models for Predicting Fatigue Crack Growth under Random Loading, J.B. Chang and C.M. Hudson (Eds.). ASTM STP 748 (1981), pp. 53-84.
302. Dougherty, D.J., de Koning, A.U. and Hillberry, B.M.,Modelling high crack growth rates under variable amplitude loading. Advances in Fatigue Lifetime Predictive Techniques, ASTM STP 1122 (1992), pp. 214-233.
303. Wang, G.S. and Blom, F. A strip model for fatigue crack growth predictions under general load conditions. Engrg. Fract. Mech., Vol. 40, (1991), pp. 507-533.
304. Bos, M.J., Development of an improved model for the prediction of fatigue crack growth in helicopter airframe structure. Proc. 24th ICAF Symposium, Naples, 16-18 May 2007, Vol. 1, L. Lazzeri and A. Salvetti (Eds.) (2007).
305. Skorupa, M. and Machniewicz, T., Some results on the strip yield model performance. Paper presented at the seminar held at TU Delft, 12 June 2007. To be published.
306. de Koning, A.U. and Liefting, G., Analysis of crack opening behavior by application of a discretized strip yield model. Mechanics of Fatigue Crack Closure, J.C. Newman, Jr. and W. Elber (Eds.). ASTM STP 982 (1988), pp. 437-458.
307. de Koning, A.U. and Dougherty, D.J., Prediction of low and high crack growth rates under constant andvariable amplitude loading. Fatigue Crack Growth under Variable Amplitude Loading, J. Petit et al. (Eds.). Elsevier (1989), pp. 208-217.
308. Siegl, J., Schijve, J. and Padmadinata, U.H., Fractographic observations and predictions on fatigue crack growth in an aluminium alloy under miniTWIST flight-simulation loading. Int. J. Fatigue, Vol. 13 (1991), pp. 139-147.
309. Schijve, J., Fundamental aspects of predictions on fatigue crack growth under variable-amplitude loading. Theoretical Concepts and Numerical Analysis of Fatigue, A.F. Blom and C.J. Beevers (Eds.). EMAS (1992), pp. 111-130.
310. Schijve, J., Fatigue crack growth under variable-amplitude loading. Fatigue and Fracture, American Society for Materials, Handbook Vol. 19, ASM(1996), pp. 110-133.
311. Skorupa, M., Machniewicz, T. and Skorupa, A., Applicability of the ASTM compliance offset method to determine crack closure levels for structural steel. Int. J. Fatigue, Vol. 29 (2007), pp. 1434-1451.
312. Skorupa, M. and Skorupa A., Experimental results and predictions on fatigue crack growth in structural steel. Int. J. Fatigue, Vol. 27 (2005), pp. 1016-1028.
313. Skorupa, M., Load interaction effects during fatigue crack growth under variable-amplitude loading. A literature review. Part I: Empirical trends. Part II: Qualitative interpretations. Fatigue Fract. Engrg. Mater. Struct., Vol. 21 (1999) pp. 987-1006
314. Vol. 22 (1999), pp. 905-926.
315. Newman, Jr., J.C., Phillips, E.P. and Everett, Jr., R.A., Fatigue analysis under constantand variable-amplitude loading using small-crack theory. NASA/TM-1999-209329 (1999).
316. Harter, J.A., Comparison of contemporary fatigue crack growth (FGG) prediction tools. Int. J. Fatigue, Vol. 21 (1999), pp. S181-S185.
317. Newman, Jr., J.C., Wu, X.R., Swain, M.H., Zhao, W., Phillips, E.P. and Ding, C.F., Small-crack growth and fatigue life predictions for high-strength aluminium alloys. Part II: Crack closure and fatigue analyses. Fatigue and Fracture of Engineering Materials and Structures, Vol. 23 (1999), pp. 59-72.
318. Wu, X.R., Newman, Jr., J.C., Zhao, W., Swain, M.H., Ding, C.F., and Phillips, E.P., Small-crack growth and fatigue life predictions for high-strength aluminium alloys. Part I: Experimental and fracture mechanics analis. Fatigue Fract. Engrg. Mater. Struct., Vol. 21 (1998), pp. 1289-1306.
319. Mitchell, M.R. and Landgraf. R.W. (Eds.), Advances in Life Time Predictive Techniques, ASTM STP 1122 (1992).
320. Newman, Jr., J.C. and Elber, W. (Eds.), Mechanics of Fatigue Crack Closure, ASTM STP 982 (1988).
321. Fatigue Crack Growth under Spectrum Loads, ASTM STP 595 (1976).
322. A Guide for Fatigue Testing and the Statistical Analysis of Fatigue Data, 2nd edn. ASTM STP No. 91-A (1963).
323. The Statistical Analysis of Data from Normal Distributions, with Particular Reference to Small Samples. ESDU Fatigue Series. No. 91041 (1991) and An Introduction to the Statistical Analysis of Engineering Data. No. 92040 (1992).
324. Hardrath, H.F., Utley, E.C. and Guthrie, D.E., Rotating-beam fatigue tests of notched and unnotched 7075-T6 aluminum-alloy specimens under stresses of constant and varying amplitudes. NACA Technical Note D-210 (1959).
325. Schijve, J., A normal distribution or aWeibull distribution for fatigue lives. Fatigue Fract. Engrg. Mater. Struct., Vol. 16 (1993), pp. 851-859.
326. Schijve, J. and Jacobs, F.A., Fatigue tests on notched and unnotched clad 24 S-T sheet specimens to verify the cumulative damage hypothesis. Nat. Aerospace Laboratory, Amsterdam, Report M.1982 (1955).
327. Rossow, E., A simple slide-rule approximation of normal probability percentages. Qualitätskontrolle, Vol. 9, No. 12 (1964), pp. 146-147 [in German].
328. Schütz, D., Planning and analysing a fatigue test programme. Fatigue Test Methodology, AGARD Lectures Series No. 118: paper 2 (1981).
329. Schijve, J., The endurance under program-fatigue testing. Full-Scale Fatigue Testing of Aircraft Structures, F.J. Plantema and J. Schijve (Eds.), Pergamon Press (1961), pp. 41-59.
330. Mann, J.Y., Scatter in fatigue life - A materials testing and design problem. Materials, Experimentation and Design in Fatigue, E. Sherratt and J.B. Sturgeon (Eds.),West Bury House (1981), pp. 390-423.
331. Jacoby, G.H. and Nowack, H., Comparison of scatter under program and random loading and influencing factors. STP 511, ASTM (1972), pp. 61-72.
332. Virkler, D.A., Hillberry, B.M. and Goel, P.K., The statistical nature of fatigue crack propagation. Trans. ASME, J. Engrg. Mat. Technol., Vol. 101 (1979), pp. 148-153.
333. Schijve, J., Broek, D., de Rijk, P., Nederveen, A. and Sevenhuysen, P.J., Fatigue tests with random and programmed load sequences with and without ground-to-air cycles. A comparative study on full-scale wing center sections. Nat. Aerospace Lab. NLR, Amsterdam, Report TR S.613 (1965).
334. Williams, J.K., The airworthiness approach to structural fatigue. Fatigue Design Procedures, E. Gassner and W. Schütz (Eds.), Pergamon Press (1969), pp. 91-138.
335. Marquis, G. and Solin, J. (Eds.), Fatigue Design and Reliability. ESIS Publication 23, Elsevier (1999).
336. Veers, P.S., Statistical considerations in fatigue. Fatigue and Fracture, American Society for Materials, Handbook Vol. 19, ASM (1996), pp. 295-302.
337. Maennig, W.-W., Planning and evaluation of fatigue tests. Fatigue and Fracture, American Society for Materials, Handbook Vol. 19, ASM (1996), pp. 303-313.
338. Schijve, J., Fatigue predictions and scatter. Fatigue Fract. Engrg. Mater. Struct., Vol. 17 (1994), pp. 381-396.
339. Tanaka, T., Nishijima, S. and Ichikawa, M. (Eds.), Statistical Research on Fatigue and Fracture. Elsevier Applied Science (1987).
340. Statistical analysis of linear or linearized stress-life (S-N) and strain-life (ε-N) fatigue data. ASTM Standard E739-80 (reapproved 1986).
341. Little, R.E. and Jebe, E.H., Manual on statistical planning and analysis. ASTMSTP 588 (1975).
342. Heller, R.A. (Ed.), Probabilistic Aspects of fatigue. STP 511 (1972).
343. Bellows, R.S., Muju, S. and Nicholas, T., Validation of the step test method for generating Haigh diagrams for Ti-6Al-4V. Int. J. Fatigue, Vol. 21 (1999), pp. 687-697.
344. Schütz, W., Fatigue strength of single shear riveted joints of aluminum alloys. Laboratorium für Betriebsfestigkeit (LBF), Darmstadt, Bericht Nr.F-47, 1963 [in German].
345. Standard Practice for Verification of Specimen Alignment under Tensile Loading. ASTM Standard E 1012-89 (1989).
346. Schütz, W., Fatigue Life Prediction - A Somewhat Optimistic View of the Problem. AGARD Lectures Series No. 62 (1973).
347. Potter, J.M. andWatanabe, R.T. (Eds.), Development of Fatigue Loading Spectra. ASTM STP 1006 (1989).
348. ten Have, A.A., Wisper and Wisperx. A summary paper describing their background, derivation and statistics. Nat. Aerospace Lab. NLR, Amsterdam, Report TP 92410 (1992).
349. Le May, I., Symposium summary and an assessment of research progress in fatigue mechanisms. Fatigue Mechanisms, J.T. Fong (Ed.),ASTMSTP 675 (1979), pp. 873-888.
350. Test Method for Measurement of Fatigue Crack Growth Rates. ASTMStandard E 647-99 (1999).
351. Johnson, H.H., Calibrating the electric potential method for studying slow crack growth. Mater. Res. Standards, Vol. 5 (1965), pp. 442-445.
352. Saxena, A. and Muhlstein, C.L., Fatigue Crack Growth Testing. ASMHandbook, Vol. 19 (1996) pp. 168-184.
353. Ichsan S. Putra and Schijve, J., Crack opening stress measurements of surface cracks in 7075-T6 Al alloy plate specimens through electron fractography. Fatigue Fract. Engrg. Mater. Struct., Vol. 15 (1992), pp. 323-338.
354. Piascik. R.S. and Willard, S.A., The characteristics of fatigue damage in the fuselage riveted lap splice joint. NASA/TP-97-206257 (Nov. 1997).
355. Fawaz, S.A., Fatigue crack growth in riveted joints. Doctor thesis, Delft University of Technology (1997).
356. de Rijck, J.J.M., Stress analysis of fatigue cracks in mechanically fastened joints. An analylitical and experimental investigation. Doctor thesis, Delft University of Technology (2005).
357. Sunder, R., Binary coded event registration on fatigue fracture surfaces. Nat. Aero. Lab., Bangalore. Report TM-MT-8-82, 1982.
358. Schijve, J., Fatigue crack closure observations and technical significance. Mechanics of Fatigue Crack Closure, ASTM STP 982 (1988), pp. 5-34.
359. Sunder, R. and Dash, P.K., Measurement of fatigue crack closure through electron microscopy. Int. J. Fatigue, Vol. 4 (1982), pp. 97-105.
360. Zhang, S., Marissen, R., Schulte, K., Trautmann, K.K., Nowack, H. and Schijve, J., Crack propagation studies on Al 7475 on the basis of constant amplitude and selective variable amplitude loading histories. Fatigue Engrg. Mater. Struct., Vol. 10 (1987), pp. 315-332.
361. Heuler, P. and Schütz, W., Standardized load-time histories - Status and trends. Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, K.-T. Rie and P.D. Portella (Eds.), Elsevier (1998), pp. 729-734.
362. 1997 Annual Book of ASTM Standards. Section 3. Metal test methods and analytical procedures. Vol.03.01, Metals.
363. Maennig, W.-W., Planning and evaluation of fatigue tests. Fatigue and Fracture, American Society for Materials, Handbook Vol. 19, ASM (1996), pp. 303-313.
364. Amzallig, C. (Ed.), Automation in Fatigue and Fracture: Testing and Analysis. ASTM STP 1231 (1994).
365. Ruschau, J.J. and Donald, J.K. (Eds.), Special Applications and Advanced Techniques for Crack Size Determination. ASTM STP 1251 (1993).
366. Marsh, K.J., Smith, R.A. and Ritchie, R.O. (Eds.), Fatigue Crack Measurement: Techniques and Applications. Engineering Materials Advisory Services (EMAS) (1991).
367. Marsh, K.J. (Ed.), Full-Scale Fatigue Testing of Components and Structures. Butterworth 1988.
368. Cullen, W.H., Landgraf, R.W., Kaisand, L.R. and Underwood, J.H. (Eds.), Automated Test Methods for Fracture and Fatigue Crack Growth. ASTM STP 877 (1985).
369. Beevers, C.J. (Ed.), Advances in Crack Length Measurement. Chameleon Press, Warley (1982).
370. Hudak, S.J. and Bucci, R.J. (Eds.), Fatigue Crack Growth Measurement and Data Analysis. ASTM STP 738, (1981).
371. Fatigue Test Methodology. AGARD Lecture Series No. 118, 1981.
372. Beevers, D.J., The Measurement of Crack Length and Shape during Fracture and Fatigue. Chamelon Press, London (1980).
373. Swanson, S.R., Handbook of Fatigue Testing. ASTM STP 566 (1974).
374. Metals Handbook, 9th edn., Vol. 16: Machining, ASM International (1989), and Vol. 5: Surface cleaning, finishing and coating. American Society of Metals (1982).
375. Van Wiggen, P.C., Rozendaal, H.C.F. and Mittemeijer, E.J., The nitriding behaviour of iron-chromium-carbon alloys. J. Mater. Sci., Vol. 20 (1985), pp. 4561-4582.
376. Overbeeke, J.L. and van Lipzig, H.T.M., Nitriding against fatigue. Fatigue 2000, M.R. Backe et al. (Eds.), EMAS Warley (2000).
377. Franz, H.E., X-ray measurements of residual stresses after surface machining of TiAl6V4 and TiAl6V6Sn2. VDI Berichte 313, Verein Deutscher Ingenieure, Düsseldorf (1978), pp. 453-462 [in German].
378. Suhr, R.W., The effect of surface finish on high cycle fatigue initiation in low alloy steel. The Behaviour of Short Fatigue Cracks, K.J. Miller and E.R. de los Rios (Eds.), EGF Publication 1, Mechanical Engineering Publications, London (1986), pp. 69-86.
379. Boswell Jr., C.C. and Wagner, R.A., Fatigue in Rotory-Wing Aircraft. Metal Fatigue, G. Sines and J.L. Weisman (Eds.), McGraw-Hill (1959), pp. 355-375.
380. Investigation of the National Aerospace Laboratory NLR, Amsterdam (unpublished).
381. Kloos, K.H., Fuchsbauer, B. and Adelmann, J., Fatigue properties of specimens similar to components deep rolled under optimized conditions. Int. J. Fatigue, Vol. 9 (1987), pp. 35-42.
382. Schütz, W., Fatigue life improvement of high-strength materials by shot peening. First Int. Conf. on Shot Peening. Pergamon Press (1981), pp. 423-433.
383. Rice, C.R. (Ed.), SAE Fatigue Design Handbook, 3rd edn. AE-22, Society of Automotive Engineers, Warrendale (1997).
384. Zahavi, E. and Torbilo, V., Fatigue Design. Life Expectancy of Machine Parts. CRC Press (1996).
385. Leis, B., Effect of surface condition and processing on fatigue performance. Fatigue and Fracture, American Society for Materials, Handbook Vol. 19, ASM(1996), pp. 314-320.
386. Harris, J.W. and Syers, G., Fatigue Evaluation. Engineering Design Guides 32, Oxford University Press (1979).
387. Frost, N.E., Marsh, K.J. and Pook, L.P., Metal Fatigue. Clarendon, Oxford (1974), Section 6.4.
388. Forrest, P.G., Fatigue of Metals. Pergamon Press, Oxford (1962), Chapter VI.
389. Waterhouse, R.B., Fretting Corrosion. Pergamon Press (1972).
390. Fenner, A.J. and Field, J.E., A study of the onset of fatigue damage due to fretting. Trans. North East Coast Inst. Engrs. Shipbuilders, Vol. 76 (1960), pp. 183-228.
391. Endo, K. and Goto, H., Initiation and propagation of fretting fatigue cracks. Wear, Vol. 38, (1976), pp. 311-324.
392. Effects of environment on fretting fatigue. Wear, Vol. 48 (1978), pp. 347-367.
393. Hoeppner, D.W. and Gates, F.L., Fretting fatigue considerations in engineering design. Wear, Vol. 70 (1981), pp. 155-164.
394. Funk, W., Test methods to investigate the influences of fretting corrosion on the endurance. Materialprüfung, Vol. 11 (1969), pp. 221-227 [in German].
395. King, R.N. and Lindley, T.C., Fretting fatigue in a 312 NiCrMoV rotor steel. Central Electricity Res. Lab., RD/L/N 75/80 (1980).
396. Buxbaum, O. and Fischer, G., The influence of fretting corrosion on the durability under sinusoidal and random loading. Konstruktion, Vol. 40 (1988), pp. 333-338 [in German].
397. Edwards, P.R. and Ryman, R.J., Studies in fretting fatigue under variable amplitude loading. Royal Aircraft Establishment, Technical Report t TR 75132 (1975).
398. White, D.J., Fatigue strength of small pinned connections made from alloy steel FV 520 B. Proc. Inst. Mech. Engrs., Vol. 182 (Part I) (1968), p. 615.
399. Schijve, J., Fatigue of lugs. Contributions to the Theory of Aircraft Structures. Nijgh-Wolters Noordhoff University Press (1972), pp. 423-440.
400. Lindley, T.C., Fretting fatigue in engineering alloys. Int. J. Fatigue, Vol. 19 (1997), pp. 39-49.
401. Shaffer, S.J. and Glaeser, W.A., Fretting fatigue. ASM Handbook, Vol. 19, Fatigue and Fracture, ASM International (1996), pp. 321-330.
402. Glaeser, W.A. and Shaffer, S.J., Contact fatigue. ASM Handbook, Vol. 19, Fatigue and Fracture, ASM International (1996), pp. 331-336.
403. Waterhouse, R.B. and Lindley, T.C. (Eds.), Fretting Fatigue. ESIS 18, Wiley (1994).
404. Attia, M.H. (Ed.), Standardization of Fretting Fatigue Test Methods and Eequipment. ASTM STP 1159 (1992).
405. Lindley, T.C. and Nix, K.J., The role of fretting in the initiation and early growth of fatigue cracks in turbo-generator materials. Multiaxial Fatigue, K.J. Miller and M.W. Brown (Eds.), ASTM STP 853 (1985), pp. 340-360.
406. Alban, L.E., Systematic Analysis of Gear Failures. ASM (1985).
407. Brown, S.R. (Ed.), Materials Evaluation under Fretting Conditions. ASTM STP 780 (1982).
408. Waterhouse, R.B., Fretting Fatigue. Applied Science Publishers, London (1981).
409. Schütz, W., Corrosion fatigue. The forgotten factor in assessing durability. Estimation, Enhancement and Control of Aircraft Fatigue Performance, J.M. Grandage and G.S. Jost (Eds.), EMAS (1995), pp. 1-51.
410. Gough, H.J. and Sopwith, D.G., Some comparative corrosion fatigue tests employing two types of stressing action. J. Iron Steel Inst., Vol. 127 (1933), pp. 301-332.
411. Pao, P.S., Wei, W. and Wei, R.P., Effect of frequency on fatigue crack growth response of AISI 4340 steel in water vapor. Environment-Sensitive Fracture of Engineering Materials, Z.A. Foroulis (Ed.), The Metallurgical Society of AIME, Warrendale, USA (1977), pp. 565-580.
412. Bradshaw, F.J. and Wheeler, C., The effect of gaseous environment and fatigue frequency on the growth of fatigue cracks in some aluminium alloys. Int. J. FractureMech., Vol. 6 (1969), pp. 255-268.
413. Broek. D., Fatigue crack growth and residual strength of aluminium sheet at low temperatures. Nat. Aerospace Lab. NLR, Report TR 72096, Amsterdam (1972).
414. 't Hart, W.G.J., Nederveen, A. Nasette, J.H. and Van Wijk, A., Influence of corrosion damage on fatigue crack initiation. Nat. Aerospace Lab. NLR, Report TR 75080, Amsterdam (1975).
415. Duquette, D.J. and Uhlig, H.H., Effect of dissolved oxygen and NaCl on corrosion fatigue of 0.18% carbon steel. Trans. ASM, Vol. 61 (1968), pp. 449-456.
416. Lynch, C.T., Vahldiek, F.W., Bhansali, K.J. and Summitt, R., Inhibition of environmentally enhanced crack growth rates in high strength steels. Environment-Sensitive Fracture of Engineering Materials, Z.A. Foroulis (Ed.), The Metallurgical Society of AIME, Warrendale, USA (1977), pp. 639-658.
417. Barsom, J.M., Effect of cyclic stress form on corrosion fatigue crack propagation below KIscc in a high yield strength steel. Corrosion Fatigue: Chemistry, Mechanics and Microstructure, O.F. Devereux, A.J. McEvily and R.W. Staehle (Eds.), Vol. NACE-2, National Association of Corrosion Engineers, Houston (1972), pp. 424-436.
418. Atkinson, J.D. and Lindley, T.C., Effect of stress waveform and hold-time on environmentally assisted fatigue crack propagation in a C-Mn structural steel. Metal Science, Vol. 13 (1979), pp. 444-448.
419. Schijve, J., The significance of fracture mechanisms for the application of fracture mechanics to fatigue crack growth in Al-alloy structures and materials. Proc. of the USAF Aircraft Structural Integrity Program Conference, San Antonio (1999).
420. Komai, K., Corrosion fatigue crack retardation and enhancement and fracture surface reconstruction technique. Environment Assisted Fatigue, P. Scott and R.A. Cottis (Eds.), EGF7, Mechanical Engineering Publications, London (1990), pp. 189-204.
421. Wanhill, R.J.H. and Schra, L., Corrosion fatigue crack arrest in aluminium alloys. ASTM STP 1085 (1990), pp. 144-165.
422. Forsyth, P.J.E., The Physical Basis of Metal Fatigue. Blackie and Son, London (1969).
423. Horibe, S., Nakamura, M. and Sumita, M., The effect of seawater on fracture mode transition in fatigue. Int. J. Fatigue, Vol. 7 (1985) pp. 224-227.
424. Schijve. J. and Arkema,W.J., Crack closure and the environmental effect on fatigue crack growth. Fac. Aerospace Eng., Report VTH-217, Delft (1976).
425. Review of accident investigation in Report MV-73-03. Ministère des Communications Administration de l'Aéronautique, Brussels (1973).
426. Barsom, J.M. and Rolfe, S., Fracture and Fatigue Control in Structures. Applications of Fracture Mechanics, 3rd edn. Butterworth-Heinemann (1999).
427. Pao, P.S., Mechanisms of corrosion fatigue. Fatigue and Fracture, American Society for Materials, Handbook Vol. 19, ASM (1996), pp. 185-192.
428. Andresen, P.L., Corrosion fatigue testing. Fatigue and Fracture, American Society for Materials, Handbook Vol. 19, ASM (1996), pp. 193-209.
429. Dover, W.D., Dharmavasan, S., Brennan, F.P. and Marsh, K.J. (Eds), Fatigue Crack Growth in Offshore Structures. EMAS, Solihull, UK (1995).
430. Carpinteri, A., Handbook of Fatigue Cracking - Propagation in Metallic Structures. Elsevier, Amsterdam (1994).
431. Lynch, S.P., Failures of structures and components by environmentally assisted cracking. Engineering Failure Analysis, Vol. 1 (1994), pp. 77-90.
432. Gangloff, R.P., Corrosion fatigue crack propagation in metals. NASA CR 4301 (1990).
433. Baloun, C.H. (Ed.), Corrosion in Natural Waters. ASTM STP 1086 (1990).
434. Scott, P. and Cottis, R.A. (Eds.), Environment Assisted Fatigue. EGF Publication 7, Mechanical Engineering Publications, London (1990).
435. Lisagor, W.B., Crooker, T.W. and Leis, B.N. (Eds.), Environmentally Assisted Cracking. Science and Engineering. ASTM STP 1049 (1990).
436. Sudarshan, T.S., Srivatsan, T.S. and Harvey II, D.P., Fatigue processes in metals - Role of aqueous environments. Engrg. Fracture Mech., Vol. 36 (1990), pp. 827-852.
437. Standard specification for substitute ocean water. ASTM-D-01141-90 (1990), American Society for Testing and Materials.
438. Jones, W.J.D. and Blackie, A.P., Effect of stress ratio on the cyclic tension corrosion fatigue life of notched steel BS970:976M33 in sea water with cathodic protection. Int. J. Fatigue, Vol. 11 (1989), pp. 417-422.
439. Corrosion fatigue. AGARD-CP-316 (1981).
440. Forrest, P.G., Fatigue of Metals. Pergamon Press, Oxford (1962).
441. Hertzberg, R.W., Deformation and Fracture Mechanics of Engineering Materials, 4th edn. John Wiley & Sons, New York (1996).
442. Ashby, M.F. and Jones, D.R.H., Engineering Materials. Pergamon Press, Oxford (1980).
443. Kool, G.A., Current and future matrials in advanced gas turbine engines. 39th ASME International Gas Turbine and Aeroengine Congress and Exposition, The Hague (1994).
444. Ripley, E.L., The philosophy which underlies the structural tests of a supersonic transport aircraft with particular attention to the thermal cycle. Advanced Approaches to Fatigue Evaluation, Proc. 6th ICAF Symposium. NASA SP-309 (1972), pp. 5-91.
445. Forrest, P.G., Fatigue of Metals. Pergamon Press, Oxford (1962).
446. Radaj, D., Fatigue Strength. Springer-Verlag, Berlin (1995) [in German].
447. Schijve, J. and De Rijk, P., The effect of temperature and frequency on the fatigue crack propagation in 2024-T3 Alclad sheet material. Nat. Aerospace Lab. NLR, Report TR M.2138, Amsterdam (1965).
448. James, L.A., Hold-time effects on the elevated temperature fatigue-crack propagation of type 304 stainless steel. Nuclear Technol., Vol. 16 (1972), pp. 521-530.
449. Stephens, R.I. (Ed.), Fatigue at Low Temperatures. ASTM STP 857 (1985).
450. Broek, D., Fatigue crack growth and residual strength of aluminium sheet at low temperatures. Nat. Aerospace Lab. NLR, Report TR 72096, Amsterdam (1972).
451. Barsom, J.M. and Rolfe, S., Fracture and Fatigue Control in Structures. Applications of Fracture Mechanics, 3rd edn. Butterworth-Heinemann (1999).
452. Davis, J.R. (Ed.), Heat Resistant Materials. ASM Speciality Handbook. ASM International (1997).
453. Piascik, R.S., Gangloff, R.P. and Saxena, A. (Eds.), Elevated Temperature Effects on Fatigue and Fracture. ASTM STP 1297, Am. Soc. for Testing and Materials (1997).
454. Fatigue and Fracture, American Society for Materials, Handbook Vol. 19, ASM (1996).
455. Webster, G.A. and Ainsworth, R.A., High Temperature Component Life Assessment. Chapman and Hall (1994).
456. Larsson, L.H., High Temperature Structural Design. Mechanical Engineering Publications, London (1992).
457. Skelton, R.P., High Temperature Fatigue: Properties and Prediction. Elsevier Applied Sciences, London (1987).
458. Schijve, J., Fatigue of Lugs. Contributions to the Theory of Aircraft Structures. Nijgh-Wolters Noordhoff Universiy Press (1972), pp. 423-440.
459. Larsson, S.E., The development of a calculation method for the fatigue strength of lugs and a study of test results for lugs of aluminium alloys. Fatigue Design Procedures, 4th ICAF Symposium. Pergamon Press (1969), pp. 309-339.
460. Unpublished calculation methods in Technical Handbook No. 3. of Fokker Aircraft Factories, TH3.411.1 (1980).
461. Fatigue-Endurance Data, Vol. 8. ESDU Engineering Science Data (1990).
462. Clarke, B.C., The use of pins with flats to increase the fatigue life of
463. Schijve, J., Broek, D. and Jacobs, F.A., Fatigue tests on aluminium alloy lugs with special reference to fretting. Nat. Aerospace Lab. NLR, Report TR M.2103, Amsterdam (1962).
464. Hartman, A. and Jacobs, F.A., The effect of various fits on the fatigue strength of pin-hole joints. Nat. Aerospace Lab. NLR, Amsterdam, Report M1946 (1954).
465. Champoux, R.L., An overview of cold expansion methods. Fatigue Prevention and Design, J.T. Barney (Ed.), EMAS, Warley (1986), pp. 35-52.
466. Leon, A., Benefits of split mandrel cold working. Int. J. Fatigue, Vol. 20 (1998), pp. 1-8.
467. Waters, K.T., Production methods of cold working joints subjected to fretting for improvement of fatigue strength. Fatigue of Aircraft Structures. ASTM STP 274 (1959) pp. 99-111.
468. Heywood, R.B., Designing against Fatigue. Chapman and Hall, London (1962).
469. Peterson, R.E., Stress Concentration Factors. John Wiley & Sons, New York (1974).
470. Shin-ichi Nishida, Failure Analysis in Engineering Applications. Butterworth-Heinemann, Oxford (1992).
471. Bonnee, W.J.A., Investigation of horizontal stabilizer attachment bolts of Astir-gliders. Nat. Aerospace Lab. NLR, Report TR 80019, Amsterdam (1980).
472. Hertel, H., Fatigue Strength of Structures. Springer-Verlag, Berlin (1969) [in German].
473. Shivakumar, K.N. and Newman, J.C., Stress concentrations for straight-shank and countersunk holes in plates subjected to tension, bending, and pin loading. NASA-TP-003192 (1992).
474. Niu, M.C., Airframe Structural Design. Conmilit Press (1988).
475. Hoffer, K., Permanent Fasteners for Light-Weight Structures. Aluminium-Verlag, Düsseldorf (1984).
476. Barrett, R.T., Fastener Design Manual. NASA Reference Publication 1228 (1990).
477. Schijve, J., Some elementary calculations on secondary bending in simple lap joints. National Aerospace Lab. NLR, Report TR 72036, Amsterdam (1972).
478. Hartman, A. and Schijve, J., The effects of secondary bending on the fatigue strength of 2024-T3 Alclad riveted joints. National Aerospace Lab. NLR, Report TR 69116, Amsterdam (1969).
479. Schijve, J., Multiple-site-damage fatigue of riveted joints. Proc. Int. Workshop on Structural Integrity of Aging Airplanes. Atlanta Technical Publications (1992), pp. 2-27.
480. Müller, R.P.G., An experimental and analytical investigation on the fatigue behaviour of fuselage riveted lap joints. The significance of the rivet squeeze force, and a comparison of 2024-T3 and Glare 3. Doctor thesis, Delft University of Technology (1995).
481. Homan, J. and Jongebreur, A.A., Calculation method for predicting the fatigue life of riveted joints. Durability and Structural Integrity of Airframes. Proc. 17th ICAF Symposium, A.F. Blom (Ed.). EMAS (1993) pp. 175-190.
482. Hartman, A., Fatigue tests on single lap joints in clad 2024-T3 aluminium alloy manufactured by a combination of riveting and adhesive bonding. National Aerospace Lab. NLR, Report M.2170, Amsterdam (1966).
483. Jarfall, L., Shear loaded fastener installations. Int. J. Vehicle Design, Vol. 7 (1986), pp. 337-380.
484. Jarfall, L., Optimum design of joints: The stress severity factor concept. Aircraft fatigue. Design, Operational and Economic Aspects, J.Y. Mann and I.S. Milligan (Eds.), Pergamon, Australia (1972), pp. 49-63.
485. de Rijck, J.J.M., Homan, J.J., Schijve, J. and Benedictus, R., The driven rivet head dimensions as an indication of the fatigue performance of aircraft lap joints. Int. J. Fatigue, Vol. 29 (2007), pp. 2208-2218.
486. de Rijck, J.J.M., Stress analysis of fatigue cracks in mechanically fastened joints. An analytical and experimental investigation. Doctor thesis, Delft University of Technology, Delft University Press (2005).
487. Segerfrojd, G., Wang, G.S., Palmberg, B. and Blom, A.F., Fatigue behaviour of mechanical joints: Critical experiments and statistical analysis. Fatigue in New and Ageing Aircraft, Proc. 19th ICAF Symposium, R. Cook and P. Poole (Eds.), EMAS, Solihull, UK (1997), pp. 575-598.
488. Toor, P.M. (Ed.), Structural Integrity of Fasteners. ASTM STP 1236 (1995).
489. Matek,W.,Muhs, D.,Wittel, H. and Becker, M., Roloff/Matek Machinenelementen, 12th edn. Vieweg & Sohn, Braunschweig (1992) [in German].
490. Bickford, J.H., An Introduction to the Design and Behaviour of Bolted Joints, 2nd edn. Marcel Dekker, New York (1990).
491. Jensen, W.J., Failures of mechanical fasteners. Failure Analysis and Prevention, Metals Handbook, Vol. 11, (1986), pp. 529-549.
492. Potter, J.M., Fatigue in mechanically fastened composite and metallic joints. ASTMSTP 927 (1986).
493. Gurney, T.R., Fatigue of Welded Structures, 2nd edn. Cambridge University Press, Cambridge, UK (1979).
494. Maddox, S.J., Fatigue Strength of Welded Structures, 2nd edn. Abington Publishing, Cambridge, UK (1991).
495. Radaj, D., Design and Analysis of Fatigue Resistant Welded Structures. Abington Publishing, Cambridge UK (1990).
496. Lancaster, J., Metallurgy of Welding, 6th edn. Abington Publishing (1999).
497. Skorupa, M., Fatigue life prediction of cruciform joints failing at the weld toe. Welding Research Supplement, Welding Journal, Aug. (1992), pp. 269S-275S.
498. Code of practice for fatigue design and assessment of steel structures. BS 7608: 1993. British Standards Institution, London (1993). See [3] for more information on other codes.
499. Noordhoek, C. and de Back, J. (Eds.), Steel in Marine Structures, Proc. 3rd Int. ESCS Offshore Conference on Steel in Marine Structures (SIMS '87). Elsevier, Amsterdam (1987).
500. Haibach, E., Fatigue Strength in Service. VDI-Verlag GmbH, Düsseldorf (1989) [in German].
501. Gurney, T.R., Cumulative damage of welded joints: II. Test results. Joining Mater., Vol. 2, (1989), pp. 390-395.
502. Overbeeke, J.L., The fatigue behaviour of heavy-duty spot welded lap joints under random loading conditions. Welding Res. Int., Vol. 7 (1977), pp. 254-275.
503. Overbeeke, J.L. and Draisma, J., Fatigue characteristic of heavy-duty spot-welded lap joints. Metal Constr. BritishWelding J., Vol. 6 (1974), pp. 213-219.
504. Rupp, A., Störzel, K. and Grubisic, V., Computer aided dimensioning of spot-welded automotive structures. SAE Paper 950711 (1995).
505. Sonsino, C.M., Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety. Int. J. Fatigue, Vol. 29 (2007), pp. 2246-2258.
506. Radaj, D., Sonsino, C.M. and Fricke, W. (Eds.), Fatigue Assessment of Welded Joints by Local Approaches. Woodhead Publishing (2006).
507. Samuelson, J. (Ed.), Design and Analysis of Welded High Strength Steel Structures. EMAS, UK (2002).
508. Savaidis, G. and Vormwald,M., Hot-spot stress evaluation of fatigue in welded structural connections supported by finite element analysis. Int. J. Fatigue, Vol. 22 (2000), pp. 85-91.
509. Barsom, J.M. and Rolfe, S., Fracture and Fatigue Control in Structures. Applications of Fracture Mechanics, 3rd edn. Butterworth-Heinemann (1999).
510. Van der Sluys, W.A., Effects of the Environment on the Initiation of Crack Growth. ASTM STP 1298 (1997).
511. Radaj, D., Review of fatigue strength assessment of non-welded and welded structures based on local parameters. Int. J. Fatigue, Vol. 18 (1996), pp. 153-170.
512. Lawrence, F.H., Dimitrakis, S.D. and Munse, W.H., Factors influencing weldment fatigue. Fatigue and Fracture, American Society for Materials, Handbook Vol. 19, ASM International (1996), pp. 274-286.
513. Tarsem, J., Fatigue and fracture control of weldments. Fatigue and Fracture, American Society for Materials, Handbook Vol. 19, ASM International (1996), pp. 434-449.
514. Dover, W.D., Dharmavasan, S., Brennan, F.P. and Marsh, K.J. (Eds.), Fatigue Crack Growth in Offshore Structures. EMAS, Solihull, UK (1995).
515. Monahan, C.C., Early Fatigue Crack Growth at Welds. Topics in Engineering,WIT Press (1995).
516. Scott, P. and Cottis, R.A. (Eds.), Environment Assisted Fatigue. EGF Publication 7, Mechanical Engineering Publications, London (1990) (four papers on welded steel joints in salt water).
517. McHenry, H.I. and Potter, J.M. (Eds.), Fatigue and Fracture Testing of Weldments. ASTM STP 1058 (1990).
518. Booth, G.S. (Ed.), Improving the Fatigue Strength of Welded Joints. The Welding Institute, Cambridge, UK (1983).
519. Residual Stresses and Their Effect. The Welding Institute, Cambridge UK (1981).
520. Hoeppner, D.W. (Ed.), Fatigue Testing of Weldments. ASTM STP 648 (1978).
521. Peterson, R.E., Stress Concentration Factors. John Wiley & Sons, New York (1974).
522. Pilkey, W.D. and Pilkey, D.F., Peterson's Stress Concentration Factors, 3rd revised edn. John Wiley & Sons (2008).
523. Schijve, J., Campoli, G. and Monaco, A., Some FE calculations on stress concentration factors. To be published.
524. Holshouser, W.L. and Mayner, R.D., Fatigue failure of metal components as a factor in civil aircraft accidents. Advanced Approaches to Fatigue Evaluation, Proc. 6th ICAF Symposium. NASA SP-309 (1972), pp. 611-630.
525. (a) Li, Z.X., Chan, T.H.T. and Ko, J.M., Fatigue analysis and life prediction of bridges with structural health monitoring data. Part I: Methodology and strategy. Int. J. Fatigue, Vol. 23 (2001), pp. 45-53.
526. (b) Chan, T.H.T., Li, Z.X. and Ko, J.M., Part II: Applications. Int. J. Fatigue, Vol. 23 (2001), pp. 55-64.
527. Grandt, Jr, A.F., Fundamentals of Structural Integrity. Damage Tolerant Design and Nondestructive Evaluation. John Wiley & Sons (2003).
528. Miller, K.J., Structural integrity - Whose responsibility? The 36th John Player Memorial Lecture. Institution of Mechanical Engineers (2001).
529. Fuentes, M., Elices, M., Martin-Meizoso, A. and Martinez-Esnaola, J.-M., Fracture Mechanics: Applications and Challenges. ESIS Publication 26, Elsevier (2000).
530. Barsom, J.M. and Rolfe, S., Fracture and Fatigue Control in Structures. Applications of Fracture Mechanics, 3rd edn. Butterworth-Heinemann (1999).
531. Marquis, G. and Solin, J. (Eds.), Fatigue Design and Reliability, 3rd Int. Symp. on Fatigue Design 98. ESIS Publication 23. Elsevier, Amsterdam (1999).
532. Marquis, G. and Solin, J. (Eds.), Fatigue Design of Components, 2nd Int. Symp. on Fatigue Design 95. ESIS Publication 22, Elsevier, Amsterdam (1997).
533. Farahmand, B., Bockrath, G. and Glassco, J., Fatigue and Fracture Mechanics of High Risk Parts. Chapman & Hall, New York (1997).
534. Materials Selection and Design. ASMHandbook Volume 20. ASMInternational (1997).
535. Hudson, C.M. and Rich, T.P. (Eds.), Case Histories Involving Fatigue and Fracture Mechanics. ASTM STP 918 (1986).
536. Abelkis, P.R. and Hudson, C.M., Design of Fatigue and Fracture Resistant Structures. ASTM STP 761 (1982).
537. Vlot, A., Glare, History of the Development of a New Aircraft Material. Kluwer Academic Publishers, Dordrecht (2001).
538. Roebroeks, G.H.J.J., Hooijmeijer, P.A., Kroon, E.J. and Heinemann, M.G., The development of CentrAl. Paper in [20].
539. Schijve, J., Van Lipzig, H.T.M., Van Gestel, G.F.J.A. and Hoeymakers, A.H.W., Fatigue properties of adhesive-bonded laminated sheet material of aluminium alloys. Engrg. Fracture Mech., Vol. 12 (1979), pp. 561-579.
540. Schijve, J., Broek, D., De Rijk, P., Nederveen, A. and Sevenhuysen, P.J., Fatigue tests with random and programmed load sequences with and without ground-to-air cycles. A comparative study on full-scale wing center sections. Nat. Aerospace Lab. NLR, Report TRS.613, Amsterdam (1965).
541. Also issued as: Technical Report AFFDL-TR-66-142, Air Force Flight Dymanics Laboratory, Wright Patterson AFB, Ohio (1966).
542. Marissen, R., Fatigue crack growth in ARALL, a hybrid aluminium-aramid composite material. Crack growth mechanisms and quantitative predictions of the crack growth rates. Doctor Thesis, Delft University of Technology (1988).
543. Roebroeks, G.H.J.J., Towards GLARE - The development of a fatigue insensitive and damage tolerant aircraft material. Doctor Thesis, Delft University of Technology (1991).
544. Roebroeks, G.H.J.J., Fiber metal laminates. Recent developments and applications. J. Fatigue, Vol. 16 (1994), pp. 33-42.
545. Roebroeks, G.H.J.J., Glare features. Paper in [21], pp. 23-37.
546. Papakyriacou, M., Stanzl-Tschegg, S.E., Mayer, H.R. and Schijve, J., Fatigue crack growth in Glare, role of glass fibers. Structural Integrity: Experiments, Models and Application, Proc. ECF 10, K.-H. Schwalbe and C. Berger (Eds.). EMAS,Warley (1994), pp. 1193-1199.
547. Papakyriacou, M., Schijve, J. and Stanzl-Tschegg, S.E., Fatigue crack growth behaviour of fibre-metal laminate Glare-1 and metal Laminate 7475 with different blunt notches. Fatigue Fract. Engrg. Mater. Struct., Vol. 20 (1997), pp. 1573-1584.
548. Schijve, J., Wiltink, F.J. and van Bodegom, V.J.W., Flight-simulation tests on notched specimens of fiber-metal laminates. Report LRV-10, Delft University of Technology (1994).
549. Schijve, J. andWiltink, F.J., Fatigue tests on notched specimens of laminates of very thin Al-alloy sheet materials. Report LRV-12, Delft University of Technology (1994).
550. Alderliesten, R.C., Fatigue crack propagation and delamination growth in Glare. Doctor Thesis, Delft University of Technology (2005).
551. Alderliesten, R.C., Analytical prediction model for fatigue crack propagation and delamination growth in Glare. Int. J. Fatigue, Vol. 29 (2007), pp. 628-646.
552. Plokker, H.M., Alderliesten, R.C. and Benedictus, R., Crack closure in fibre metal laminates. Fatigue Fract. Engrg. Mater. Struct., Vol. 30 (2007), pp. 608-620.
553. Mattousch, A.C., Structural application of stacked GLARE - Design, production and testing of the CN-235 forward attachment fitting lug. Master Thesis, Faculty of Aerospace Engineering, Delft (1992).
554. Soetikno, T.P., Residual strength of Glare 3 riveted lap joints after fatigue testing. Master Thesis, Faculty of Aerospace Engineering, Delft (1992).
555. (Results summarized in: LR-Document b2-93-6, Delft, 1993).
556. Vogelesang, L.B., Schijve, J. and Fredell, R., Fibre-metal laminates: Damage tolerant aerospace materials. Case Studies in Manufacturing with Advanced Materials, Vol. 2, A. Demaid and J.H.W. de Wit (Eds.). Elsevier (1995), pp. 253-271.
557. Beumler, Th., Flying GLARE. Doctor Thesis, Delft University of Technology, Delft University Press (2004).
558. Benedictus, R. (Ed.), Damage tolerance of aircraft structures. Papers of a Symposium in Delft, September 2007, to be published in Int. J. Fatigue.
559. Vogelesang, L.B., Fibre MetalLaminates - The development of a new family of hybrid materials. Plantema Memorial Lecture, Proceedings ICAF Symposium, Lucern. EMAS Publishing, UK (2003).
560. Vlot, A. and Gunnink, J.W., Fibre Metal Laminates. An Introduction. Kluwer Academic Publishers (2001).
561. Vlot, A., Bonded aircraft repairs under variable amplitude fatigue loading and at low temperatures. Fatigue Fracture Engrg. Mater. Struct., Vol. 23 (1999), pp. 9-18.
562. Vercammen, R.W.A. and Ottens, H.H., Full-scale Glare fuselage panel tests. Fatigue in New and Aging Aircraft, Proc. 19th ICAF Symp., R. Cook and P. Poole (Eds.). EMAS, Warley (1997), pp. 1015-1026.
563. de Vries, T.J. and Vlot, A., Delamination behavior of spliced fiber metal laminates (FML). Part 1: Experimental results (ARALL, GLARE, A330, A3XX). Composite Struct., Vol. 46 (1999), pp. 131-145.
564. Vlot, A., Impact loading on fiber-metal laminates. Int. J. Impact Engrg., Vol. 18 (1996), pp. 291-307.
565. Vogelesang, L.B., Gunnink, J.W., Roebroeks, G.H.J.J. and Müller, R.P.G., Toward the supportable and durable aircraft fuselage structure. Estimation, Enhancement and Control of Aircraft fatigue Performance, Proc. 18th ICAF Symposium, J.M. Grandage and G.S. Jost (Eds.). EMAS, Warley (1995), pp. 257-271.
566. Vlot, A., Impact properties of fibre metal laminates. Composite Engrg., Vol. 10 (1993), pp. 911-927.
567. Van Veggel, L.H., Jongebreur, A.A. and Gunnink, J.W., Damage tolerance aspects of an experimental ARALL F-27 lower wing skin panel. New Materials and Fatigue Resistant Aircraft Design, Proc. 14th ICAF Symposium, D.L. Simpson (Ed.). EMAS, Warley (1987), pp. 465-502.