A low-cost laser scanning solution for flexible robotic cells: Spray coating

International Journal of Advanced Manufacturing Technology

Volumn 58, Issue 9-12, 2012, Pages 1031-1041

  Ferreira, Marcos ^a   Moreira, António Paulo ^a   Neto, Pedro ^b  

^a UNIVERSITY OF PORTO   (Portugal)

^b UNIVERSITY OF COIMBRA   (Portugal)

Author keywords

3D laser scanning; 3D reconstruction; Autonomous systems; Flexible manufacturing; Pattern recognition; Robotics; Spray coating

Indexed keywords

3D LASER SCANNING; 3D RECONSTRUCTION; AUTONOMOUS SYSTEMS; FLEXIBLE MANUFACTURING; SPRAY COATING;

BEHAVIORAL RESEARCH; COATINGS; COMPUTER AIDED DESIGN; FLEXIBLE MANUFACTURING SYSTEMS; LASER APPLICATIONS; PATTERN RECOGNITION; ROBOTICS; ROBOTS;

THREE DIMENSIONAL;

EID: 84857448832     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-011-3452-x     Document Type: Article

References (42)

1. ZM Bi SYT Lang 2007 A framework for CAD and sensor-based robotic coating automation IEEE Trans Ind Inform 3 1 84 91 10.1109/TII.2007.891309 10.1109/TII.2007.891309 (Pubitemid 46389274)
2. F Bernardini H Rushmeier 2002 The 3D model acquisition pipeline Comput Graphics Forum 21 2 149 172 10.1111/1467-8659.00574 10.1111/1467-8659.00574 (Pubitemid 34750958)
3. F Blais 2004 Review of 20 years of range sensor development J Electron Imaging 13 1 231 240 10.1117/1.1631921 10.1117/1.1631921
4. T Cover P Hart 1967 Nearest neighbor pattern classification IEEE Trans Inf Theory 13 1 21 27 10.1109/TIT.1967.1053964 0154.44505 10.1109/TIT.1967. 1053964
5. P Neto JN Pires AP Moreira 2010 High-level programming and control for industrial robotics: using a hand-held accelerometer-based input device for gesture and posture recognition Ind Robot Int J 37 2 137 147 10.1108/01439911011018911 10.1108/01439911011018911
6. Neto P, Pires JN, Moreira AP (2009) Accelerometer-based control of an industrial robotic arm. In: Proc 18th IEEE Int Symp Robot Hum Interact Commun, pp 1192-1197. doi: 10.1109/ROMAN.2009.5326285
7. CW Chen 2009 Modeling and control for non-linear structural systems via a NN-based approach Expert Syst Appl 36 3 4765 4772 10.1016/j.eswa.2008.06.062 10.1016/j.eswa.2008.06.062
8. FH Hsiao CW Chen YW Liang SD Xu WL Chiang 2005 T-S fuzzy controllers for non-linear interconnected systems with multiple time delays IEEE Trans Circuit Syst I 52 9 1883 1893 10.1109/TCSI.2005.852492 10.1109/TCSI.2005.852492 (Pubitemid 41488819)
9. YY Cao PM Frank 2000 Analysis and synthesis of non-linear time-delay systems via fuzzy control approach IEEE Trans Fuzzy Syst 8 2 200 211 10.1109/91.842153 10.1109/91.842153
10. NA Borghese G Ferrigno G Baroni A Pedotti S Ferrari R Savarè 2002 Autoscan: A flexible and portable 3D scanner IEEE Comput Graphics Appl 18 3 38 41 10.1109/38.674970 10.1109/38.674970 (Pubitemid 128558674)
11. S Son S Kim KH Lee 2003 Path planning of multi-patched freeform surfaces for laser scanning Int J Adv Manuf Technol 22 424 435 10.1007/s00170-002-1502-0 10.1007/s00170-002-1502-0
12. Aristos D, Tzafestas S (2009) Simultaneous object recognition and position tracking for robotic applications. In: Proc 2009 IEEE Int Conf Mechatron, pp 1-7. doi: 10.1109/ICMECH.2009.4957198
13. Z Fang D Xu M Tan 2010 Visual seam tracking system for butt weld of thin plate Int J Adv Manuf Technol 49 5-8 519 526 10.1007/s00170-009-2421-0 10.1007/s00170-009-2421-0
14. D Marshall G Lukacs R Martin 2001 Robust segmentation of primitives from range data in the presence of geometric degeneracy IEEE Trans Pattern Anal Mach Intell 23 3 304 314 10.1109/34.910883 10.1109/34.910883 (Pubitemid 32286637)
15. DG Lowe 1987 Three-dimensional object recognition from single two-dimensional images Artif Intell 31 3 355 395 10.1016/0004-3702(87)90070-1 10.1016/0004-3702(87)90070-1 (Pubitemid 17574777)
16. M Hayashibe N Suzuki Y Nakamura 2006 Laser-scan endoscope system for intraoperative geometry acquisition and surgical robot safety management Méd Image Anal 10 4 509 519 10.1016/j.media.2006.03.001 10.1016/j.media.2006.03.001 (Pubitemid 44161148)
17. Vincze M, Pichler A, Biegelbauer G, Hausler K, Anderson H, Madsen O, Kristiansen M (2002) Automatic robotic sparay painting of low volume high variant parts. In: Proc 33rd Int Symp Robot
18. Pichler A, Vincze M, Anderson H, Madsen O, Hausler K (2002) A method for automatic spray painting of unknown parts. In: Proc IEEE Int Conf Robot Automat, pp 444-449. doi: 10.1109/ROBOT.2002.1013400 (Pubitemid 34916639)
19. H Song H-Y Feng 2009 A progressive point cloud simplification algorithm with preserved sharp edge data Int J Adv Manuf Technol 45 583 592 10.1007/s00170-009-1980-4 10.1007/s00170-009-1980-4
20. Acosta D, García O, Aponte J (2006) Laser triangulation for shape acquisition in a 3D scanner plus scan. In: Proc 2006 Electron, Robot Automot Mech Conf, pp 14-19. doi: 10.1109/CERMA.2006.54 (Pubitemid 47159496)
21. Strat AV, Oliveira MM (2003) A point-and-shoot color 3D camera. In: Proc 4th Int Conf 3-D Digit Imaging Model, pp 483-490. doi: 10.1109/IM.2003.1240285
22. M Demeyere D Rurimunzu C Eugne 2004 Diameter measurement of spherical objects by laser triangulation in an ambulatory context IEEE Trans Instrum Measurement 56 3 867 872 10.1109/TIM.2007.894884 10.1109/TIM.2007.894884 (Pubitemid 46784555)
23. Noll R, Krauhausen M (2003) Multi-beam laser triangulation for the measurement of geometric features of moving objects in production lines. In: Proc 2003 Conf Lasers Electro-Optics Europe, pp 468. doi: 10.1109/CLEOE.2003. 1313531
24. E Vezzetti 2009 Computer aided inspection: design of customer-oriented benchmark for noncontact 3D scanner evaluation Int J Adv Manuf Technol 41 1140 1151 10.1007/s00170-008-1562-x 10.1007/s00170-008-1562-x
25. Kwok KS, Louks CS, Driessen BJ (1998) Rapid 3-D digitizing and tool path generation for complex shapes. In: Proc IEEE Int Conf Robot Automat, pp 2789-2794. doi: 10.1109/ROBOT.1998.680468
26. Sheng X, Krömker M (1998) Surface reconstruction and extrapolation from multiple range images for automatic turbine blades repair. In: Proc IEEE IECON 1998 Conf, pp 1315-1320. doi: 10.1109/IECON.1998.722840
27. S Martínez E Cuesta J Barreiro B Álvarez 2010 Analysis of laser scanning and strategies for dimensional and geometrical control Int J Adv Manuf Technol 46 621 629 10.1007/s00170-009-2106-8 10.1007/s00170-009-2106-8
28. Lei W, Mei B, Jun G, ChunSheng O (2006) A novel double triangulation 3D camera design. In: Proc 2006 IEEE Int Conf Inf Acquis, pp 877-882. doi: 10.1109/ICIA.2006.305849
29. Ma X, Hongbin Z (2007) Hybrid scene reconstruction by integrating scan data and stereo image pairs. In: Proc 6th Int Conf 3-D Digit Imaging Mode, pp 393-400. doi: 10.1109/3DIM.2007.28
30. Aliakbarpour H, Núñez P, Prado J, Khoshhal K, Dias J (2009) An efficient algorithm for extrinsic calibration between a 3D laser range finder and a stereo camera for surveillance. In: Proc 14th Int Conf Adv Robot
31. E Zussman H Schuler G Seliger 1994 Analysis of the geometrical features detectability constraints for laser-scanner sensor planning Int J Adv Manuf Technol 9 56 64 10.1007/BF01792868
32. Nixon M, Aguado A (2008) Feature extraction and image processing. Elsevier, Oxford
33. GG Savii 2004 Camera calibration using compound genetic simplex algorithm J Optoelectron Adv Mater 6 4 1255 1261 (Pubitemid 40009710)
34. J Weng P Cohen M Herniou 1992 Camera calibration with distortion models and accuracy evaluation IEEE Trans Pattern Anal Mach Intell 14 10 965 980 10.1109/34.159901 10.1109/34.159901 (Pubitemid 23555820)
35. Eberly D (2008) Least squares fitting of data. Geometric Tools, LLC
36. KG Mehrotra CK Mohan S Ranka 1991 Bounds on the number of samples needed for neural learning IEEE Trans Neural Netw 2 6 548 558 10.1109/72.97932 10.1109/72.97932 (Pubitemid 23563889)
37. Uchimura S, Hamamoto Y, Tomita S (1995) Effects of the sample size in artificial neural network classifier design. In: Proc IEEE Int Conf Neural Netw, pp 2126-2129. doi: 10.1109/ICNN.1995.489006
38. Hamamoto Y, Uchimura S, Kanaoka T, Tomita S (1993) Evaluation of artificial neural network classifiers in small sample size situations. In: Proc 1993 Int Joint Conf Neural Netw, pp 1731-1735. doi: 10.1109/IJCNN.1993.716988
39. Neto P, Pires JN, Moreira AP (2010) CAD-based off-line robot programming. In: Proc 4th IEEE Int Conf Robot, Autom Mechatron, pp 516-521. doi: 10.1109/RAMECH.2010.5513141
40. P Hertling L Hog L Larsen JW Perram HG Petersen 1996 Task curve planning for painting robots-part I: process modeling and calibration IEEE Trans Robot Autom 12 2 324 330 10.1109/70.488951 10.1109/70.488951 (Pubitemid 126774400)
41. ImagingSource (2011) DMK 31BU03 camera datasheet. Available at: http://www.theimagingsource.com/en-US/products/cameras/usb-ccd-mono/dmk31bu03. Accessed 1 June 2011
42. Video (2011) INESC Porto (University of Porto) and University of Coimbra. Available at: robotics.dem.uc.pt/pedro.neto/GS6.wmv. Accessed 1 June 2011