Evaluation of self-adhesive resin cement bond strength to yttria-stabilized zirconia ceramic (Y-TZP) using four surface treatments

Journal of Adhesive Dentistry

Volumn 13, Issue 5, 2011, Pages 473-480

  Miragaya, Luciana ^a   Maia, Luciane Cople ^b   Sabrosa, Carlos Eduardo ^a   De Goes, Mário Fernando ^c   Da Silva, Eduardo Moreira ^a  

^a FLUMINENSE FEDERAL UNIVERSITY   (Brazil)

^b FEDERAL UNIVERSITY OF RIO DE JANEIRO   (Brazil)

^c UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

EDS; Microshear bond strength; Resin cements; SEM; Surface treatment; Yttria stabilized zirconia ceramic

Indexed keywords

ALLOY PRIMER; ALUMINUM OXIDE; BIOMATERIAL; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; MACROGOL DERIVATIVE; METHACRYLIC ACID DERIVATIVE; METHACRYLOXYPROPYLTRIMETHOXYSILANE; METHACRYLOYLOXYDECYL DIHYDROGEN PHOSPHATE; POLYMETHACRYLIC ACID DERIVATIVE; RELY X UNICEM; RELYX ARC; RESIN CEMENT; ROCATEC; SILANE DERIVATIVE; THIOKETONE; TOOTH CEMENT; WATER; YTTRIA STABILIZED TETRAGONAL ZIRCONIA; YTTRIUM; ZIRCONIUM;

ARTICLE; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL BONDING; DENTAL ETCHING; DENTAL PROCEDURE; HUMAN; INSTRUMENTATION; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; RANDOMIZED CONTROLLED TRIAL; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH; SPECTROMETRY; SURFACE PROPERTY; TEMPERATURE; TIME; TOOTH PROSTHESIS;

ALUMINUM OXIDE; BISPHENOL A-GLYCIDYL METHACRYLATE; COATED MATERIALS, BIOCOMPATIBLE; DENTAL BONDING; DENTAL CEMENTS; DENTAL ETCHING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; HUMANS; MATERIALS TESTING; METHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; POLYETHYLENE GLYCOLS; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SHEAR STRENGTH; SILANES; SPECTROMETRY, X-RAY EMISSION; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; THIONES; TIME FACTORS; WATER; YTTRIUM; ZIRCONIUM;

EID: 84856379765     PISSN: 14615185     EISSN: 17579988     Source Type: Journal    
DOI: 10.3290/j.jad.a19820     Document Type: Article

References (36)

1. Aboushelib MN, Matinlinna JP, Salameh Z, Ounsi H. Innovations in bonding to zirconia-based materials: Part I. Dent Mater 2008; 24: 1268-1272.
2. Amaral R, Özcan M, Valandro LF, Balducci I, Bottino MA. Effect of conditioning methods on the microtensile bond strength of phosphate monomer- based cement on zirconia ceramic in dry and aged conditions. J Biomed Mater Res B Appl Biomater 2008; 85: 1-9.
3. Blatz MB, Phark JH, Özer F, Mante FK, Saleh N, Bergler M, Sadan A. In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion. Clin Oral Investig 2010; 14: 187-192.
4. Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003; 89: 268-274.
5. Blatz MB. Long-term clinical success of all-ceramic posterior restorations. Quintessence Int 2002; 33: 415-426.
6. Burke FJ, Fleming GJ, Nathanson D, Marquis PM. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent 2002; 4: 7-22.
7. Casucci A, Osorio E, Osorio R, Monticelli F, Toledano M, Mazzitelli C, Ferrari M. Influence of different surface treatments on surface zirconia frameworks. J Dent 2009; 37: 891-897.
8. Cavalcanti AN, Foxton RM, Watson TF, Oliveira MT, Giannini M, Marchi GM. Bond strength of resin cements to a zirconia ceramic with different surface treatments. Oper Dent 2009; 34: 280-287.
9. Chaiyabutr Y, McGowan S, Phillips KM, Kois JC, Giordano RA, The effect of hydrofluoric acid surface treatment and bond strength of a zirconia veneering ceramic. J Prosthet Dent 2008;100: 194-202.
10. Christel P, Meunier A, Heller M, Torre JP, Peille CN. Mechanical properties and short-therm in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 1989; 23: 45-61.
11. de Oyagüe RC, Monticelli F, Toledano M, Osorio E, Ferrari M, Osorio R. Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic. Dent Mater 2009; 25: 172-179.
12. Dérand P, Dérand T. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 2000; 13: 131-135.
13. Gerth HU, Dammaschke T, Züchner H, Schäfer E. Chemical analysis and bonding reaction of RelyX Unicem and Bifix composites - a comparative study. Dent Mater 2006; 22: 934-941.
14. Guazzato M, Quach L, Albakry M, Swain MV. Influence of surface and heat treatments on the flexural strength of YTZP dental ceramic. J Dent 2005; 33: 9-18.
15. Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 1998; 14: 64-71.
16. Lava Precision and Solutions - Handling and Preparation Guidelines for Dentists and Labs; 3M ESPE internal data.
17. Lehmann F, Kern M. Durability of resin bonding to zirconia ceramic using different primers. J Adhes Dent 2009; 11: 479-483.
18. Luthardt RG, Holzhüter M, Sankuhl O, Herold V, Schnapp JD, Kuhlisch E, Walter M. Reliability and properties of ground Y-TZP zirconia ceramics. J Dent Res 2002; 81: 487-491.
19. Luthardt RG, Sandkuhl O, Reitz B. Zirconia-TZP and alumina-advanced technologies for the manufacturing of single crowns. Eur J Prosthodont Restor Dent 1999; 7: 113-119.
20. Meng X, Yoshida K, Atsuta M. Microshear bond strength of resin bonding systems to machinable ceramic with different surface treatments. J Adhes Dent 2008; 10: 189-196.
21. Nothdurft FP, Motter PJ, Pospiech PR. Effect of surface treatment on the initial bond strength of different luting cements to zirconium oxide ceramic. Clin Oral Investig 2009; 13: 229-235.
22. Palacios RP, Johnson GH, Phillips KM, Raigrodski AJ. Retention of zirconium oxide ceramic crowns with three types of cement. J Prosthet Dent 2006; 96: 104-114.
23. Phark JH, Duarte S, Blatz M, Sadan A. An in vitro evaluation of the longterm resin bond to a new densely sintered high-purity zirconium-oxide ceramic surface. J Prosthet Dent 2009; 101: 29-38.
24. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999; 20: 1-25.
25. Piwowarczyk A, Lauer HC, Sorensen JA. The shear bond strength between luting cements and zirconia ceramics after two pre-treatments. Oper Dent 2005; 30: 382-388.
26. Radovic I, Monticelli F, Goracci C, Vulicevic ZR, Ferrari M. Self-adhesive resin cements: a literature review. J Adhes Dent 2008; 10: 251-258.
27. RelyX Unicem - Technical Product Profile (RelyX Unicem_TPP_EBU_1108_02_15.pdf); 3M ESPE internal data.
28. Sato H, Yamada K, Pezzotti G, Nawa M, Ban S. Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment. Dent Mater J 2008; 27: 408-414.
29. Shimada Y, Yamaguchi S, Tagami J. Micro-shear bond strength of dualcured resin cement to glass ceramics. Dent Mater 2002; 18: 380-388.
30. Valandro LF, Özcan M, Bottino MC, Bottino MA, Scotti R, Bona AD. Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: The effect of surface conditioning. J Adhes Dent 2006; 8: 175-181.
31. Wada T, Development of a new adhesive material and its properties. In: Gettleman L, Vrijhoef MMA, Uchiyama Y (eds). Proceedings of the international symposium on adhesive prosthodontics. June 24, 198: 9-18.
32. Wang H, Aboushelib MN, Feilzer AJ. Strength influencing variables on CAD/CAM zirconia frameworks. Dent Mater 2008; 24: 633-638.
33. Wegner SM, Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2000; 2: 139-147.
34. Wolfart M, Lehmann F, Wolfart S, Kern M. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 2007; 23: 45-50.
35. Yang B, Barloi A, Kern M. Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater 2010; 26: 44-50.
36. Zhang Y, Lawn BR, Rekow ED, Thompson VP. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B Appl Biomater 2004; 71: 381-386.