Three-dimensional finite element analysis of vertical and angular misfit in implant-supported fixed prostheses

International Journal of Oral and Maxillofacial Implants

Volumn 26, Issue 4, 2011, Pages 788-796

  Assunção, Wirley Gonçalves ^a   Gomes, Érica Alves ^a   Rocha, Eduardo Passos ^a   Delben, Juliana Aparecida ^a  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

Author keywords

Abutment stress; Biomechanics; Dental implant; Dental prosthesis; Finite element analysis; Implant stress

Indexed keywords

ARTICLE; BIOMECHANICS; COMPRESSIVE STRENGTH; COMPUTER SIMULATION; DENTAL PROCEDURE; DENTURE; FINITE ELEMENT ANALYSIS; HUMAN; INSTRUMENTATION; JAW; MANDIBLE; MECHANICAL STRESS; METHODOLOGY; PATHOPHYSIOLOGY; PROSTHESIS; TENSILE STRENGTH; TOOTH IMPLANTATION; TOOTH PROSTHESIS;

ALVEOLAR PROCESS; BIOMECHANICS; COMPRESSIVE STRENGTH; COMPUTER SIMULATION; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS RETENTION; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTAL STRESS ANALYSIS; DENTURE, PARTIAL, FIXED; FINITE ELEMENT ANALYSIS; HUMANS; MANDIBLE; PROSTHESIS FITTING; STRESS, MECHANICAL; TENSILE STRENGTH;

EID: 84555208829     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (44)

1. Skalak R. Biomechanical considerations in osseointegrated prostheses. J Prosthet Dent 1983;49:843-848.
2. Klineberg IJ, Murray GM. Design of superstructures for osseointegrated fixtures. Swed Dent J Suppl 1985;28:63-69.
3. Sahin S, Çehreli MC. The significance of passive framework fit in implant prosthodontics: Current status. Implant Dent 2001;10:85-92.
4. Carlson B, Carlsson GE. Prosthodontic complications in osseointegrated dental implant treatment. Int J Oral Maxillofac Implants 1994;9:90-94.
5. Dellinges MA, Tebrock OC. A measurement of torque values obtained with hand-held drivers in a simulated clinical setting. J Prosthodont 1993;2:212-214.
6. Jorneus L, Jemt T, Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implants 1992;7:353-359.
7. Berglundh T, Persson L, Klinge B. A systematic review of the incidence of biological and technical complications in implant dentistry reported in prospective longitudinal studies of at least 5 years. J Clin Periodontol 2002;29(suppl 3):197-212.
8. Kunavisarut C, Lang LA, Stoner BR, Felton DA. Finite element analysis on dental implant-supported prostheses without passive fit. J Prosthodont 2002;11:30-40.
9. Natali NA, Pavan PG, Ruggero AL. Evaluation of stress induced in peri-implant bone tissue by misfit in multi-implant prosthesis. Dent Mater 2006;22:388-395.
10. Natali NA, Carniel EL, Pavan PG. Investigation of bone inelastic response in interaction phenomena with dental implants. Dent Mat 2008;24:561-569.
11. Jemt T, Lekholm U, Johansson CB. Bone response to implantsupported frameworks with differing degrees of misfit preload: In vivo study in rabbits. Clin Implant Dent Relat Res 2000;2:129-137.
12. Jemt T, Book K. Prosthesis misfit and marginal bone loss in edentulous implant patients. Int J Oral Maxillofac Implants 1996;11:620-625.
13. Carr AB, Gerard DA, Larsen PE. The response of bone in primates around unloaded dental implants supporting prostheses with different levels of fit. J Prosthet Dent 1996;76:500-509.
14. Brånemark PI, Zarb G, Albrektsson T. Tissue-Integrated Prostheses: Osseointegration in Clinical Dentistry. Chicago:Quintessence, 1985:268-271.
15. Binon PP. Evaluation of machining accuracy and consistency of selected implants, standard abutments, and laboratory analogs. Int J Prosthodont 1995;8:162-178.
16. Byrne D, Houston F, Cleary R, Claffey N. The fit of cast and premachined implant abutments. J Prosthet Dent 1998;80:184-192.
17. Assunção WG, Gennari-Filho H, Zaniquelli O. Evaluation of transfer impressions for osseointegrated implants at various angulations. Implant Dent 2004;13:358-366.
18. Kano SC, Binon PP, Curtis DA. A classification system to measure the implant-abutment microgap. Int J Oral Maxillofac Implants 2007;22:879-885.
19. Barbosa GAS, Simamoto PC Jr, Fernandes Neto AJ, Mattos MGC, Neves FD. Prosthetic laboratory influence on the vertical misfit at the implant/UCLA abutment interface. Braz Dent J 2007;18:139-143.
20. Assunção WG, Cardoso A, Gomes EA, Tabata LF, dos Santos PH. Accuracy of impression techniques for implants. Part 1-Influence of transfer copings surface abrasion. J Prosthodont 2008;17:641-647.
21. Jemt T, Lie A. Accuracy of implant-supported prostheses in the edentulous jaw: Analysis of precision of fit between cast gold-alloy frameworks and master casts by means of a threedimensional photogrammetric technique. Clin Oral Implants Res 1995;6:172-180.
22. Millington ND, Leung T. Inaccurate fit of implant superstructures. Part 1: Stresses generated on the superstructure relative to the size of fit discrepancy. Int J Prosthodont 1995;8:511-516.
23. Assunção WG, Dos Santos PH, Deben JA, Gomes EA, Barão VAR, Tabata LF. Effect of misfit on preload maintenance of retention screws of implant-supported prostheses. J Mater Eng Perf 2009;18:935-938.
24. Natali NA, Pavan PG. Numercial approach to dental biomechanics. In: Natali NA (ed). Dental Biomechanics. London:Taylor & Francis, 2003:211-239.
25. Sevimay M, Usumez A, Eskitascioglu G. The influence of various occlusal materials on stresses transferred to implantsupported prostheses and supporting bone: A threedimensional finite-element study. J Biomed Mater Res B Appl Biomater 2005,73B:140-147.
26. Holmes DC, Loftus JT. Influence of bone quality on stress distribution for endosseous implants. J Oral Implants 1997;3:104-111.
27. Ichikawa T, Kanitani H, Kawamato N, Matsumato N, Wigianto R. Influence of bone quality on the stress distribution. Clin Oral Implant Res 1997;8:18-22.
28. Çiftçi Y, Canay S. The effect of veneering materials on stress distribution in implant-supported fixed prosthetic restorations. Int J Oral Maxillofac Implants 2000;15:571-582.
29. Barbier L, Vander Sloten J, Krzesinski E, Schepers E, van Der Perre G. Finite element analysis of non-axial versus axial loading of oral implants in the mandible of the dog. J Oral Rehabil 1998;25:847-858.
30. Lewinstein I, Banks-Sills L, Eliasi R. Finite element analysis of a new system (IL) for supporting an implant-retained cantilever prosthesis. Int J Oral Maxillofac Implants 1995;10:355-366.
31. Geng JP, Tan KBC, Liu GR. Application of finite element analysis in implant dentistry: A review of literature. J Prosthet Dent 2001;85:585-607.
32. Suansuwan N, Swain MV. Determination of elastic properties of metal alloys and dental porcelains. J Oral Rehabil 2001;28:133-139.
33. Dejak B, Mlotkowski A. Three-dimensional finite element analysis of strength and adhesion of composite resin versus ceramic inlays in molars. J Prosthet Dent 2008;99:131-140.
34. Helkimo E, Carlsson GE, Helkimo M. Bite force and state of dentition. Acta Odontol Scand 1977;35:297-303.
35. Patterson EA, Johns RB. Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants. Int J Oral Maxillofac Implants 1992;7:26-34.
36. Rangert B, Jemt T, Jörneus L. Forces and moments on Brånemark implants. Int J Oral Maxillofac Implants 1989;4:241-247.
37. Anusavice KJ (ed). Phillips’ Science of Dental Materials, ed 11. St Louis: Saunders, 2003.
38. Wakabayashi N, Ona M, Suzuki T, Igarashi Y. Nonlinear finite element analyses: Advances and challenges in dental applications. J Dent 2008;36:463-471.
39. Sahin S, Çehreli MC, Yalçin E. The influence of functional forces on the biomechanics of implant-supported prostheses-A review. J Dent 2002;30:271-282.
40. Binon PP, McHugh UM. The effect of eliminating implant/ abutment rotational misfit on screw joint stability. Int J Prosthodont 1996;9:511-519.
41. Quirynen M, de Soete MD, van Steenberghe D. Infectious risks for oral implants: A review of the literature. Clin Oral Implants Res 2002;13:1-19.
42. Eskitascioglu G, Usumez A, Sevimay M, Soykan E, Unsal E. The influence of occlusal loading location on stresses transferred to implant-supported prostheses and supporting bone:A three-dimensional finite element study. J Prosthet Dent 2004;91:144-150.
43. Meijer HJA, Starmans FJM, Bosman F, Steen WHA. A comparison of three finite element models of an edentulous mandible provided with implants. J Oral Rehabil 1993;20:147-157.
44. Cochran DL. The scientific basis for clinical experiences with Straumann implants including the ITI dental implant system:A consensus report. Clin Oral Implant Res 2000;11:33-58.