Nonlinear finite element analyses: Advances and challenges in dental applications

Journal of Dentistry

Volumn 36, Issue 7, 2008, Pages 463-471

  Wakabayashi, N ^a   Ona, M ^b   Suzuki, T ^a   Igarashi, Y ^b  

^a IWATE MEDICAL UNIVERSITY   (Japan)

^b TOKYO MEDICAL AND DENTAL UNIVERSITY   (Japan)

Author keywords

Contact stress; Finite element analysis; Interfacial stress; Nonlinear; Viscoelasticity

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS;

BIOMECHANICS; CHEMISTRY; DENTISTRY; FINITE ELEMENT ANALYSIS; HUMAN; NONLINEAR SYSTEM; PERIODONTAL LIGAMENT; PHYSIOLOGY; REVIEW; TOOTH; TOOTH PROSTHESIS;

BIOMECHANICS; DENTAL MATERIALS; DENTAL PROSTHESIS; DENTISTRY; FINITE ELEMENT ANALYSIS; HUMANS; NONLINEAR DYNAMICS; PERIODONTAL LIGAMENT; TOOTH;

EID: 44749086357     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2008.03.010     Document Type: Review

References (63)

1. Mühlemann H.R. Periodontometry, a method for measuring tooth mobility. Oral Surgery, Oral Medicine, Oral Pathology, oral radiology and endodontics 4 (1951) 1220-1233
2. Rees J.S., and Jacobsen P.H. Elastic modulus of the periodontal ligament. Biomaterials 18 (1997) 995-999
3. Middleton J., Jones M., and Wilson A. The role of the periodontal ligament in bone modeling: the initial development of a time-dependent finite element model. American Journal of Orthodontics and Dentofacial Orthopedics 109 (1996) 155-162
4. Provatidis C.G. A comparative FEM-study of tooth mobility using isotropic and anisotropic models of the periodontal ligament. Finite Element Method. Medical Engineering and Physics 22 (2000) 359-370
5. Jones M.L., Hickman J., Middleton J., Knox J., and Volp C. A validated finite element method study of orthodontic tooth movement in the human subject. Journal of Orthodontics 28 (2001) 29-38
6. Yettram A.L., Wright K.W., and Pickard H.M. Finite element stress analysis of the crowns of normal and restored teeth. Journal of Dental Research 55 (1976) 1004-1011
7. Süli E., and Mayers D. An introduction to numerical analysis (2003), Cambridge University Press
8. Pini M., Zysset P., Botsis J., and Contro R. Mechanical characterization of bovine periodontal ligament. Journal of Periodontal Research 37 (2002) 237-244
9. Durkee M. The non-linear stress-strain behavior of the human periodontal ligament and its effect on finite element models of dental structures. University of Maryland. PhD theses; 1996.
10. Yoshida N., Koga Y., Peng C.L., Tanaka E., and Kobayashi K. In vivo measurement of the elastic modulus of the human periodontal ligament. Medical Engineering and Physics 23 (2001) 567-572
11. Poppe M., Bourauel C., and Jäger A. Determination of the elasticity parameters of the human periodontal ligament and the location of the center of resistance of single-rooted teeth a study of autopsy specimens and their conversion into finite element models. Journal of Orofacial Orthopedics 63 (2002) 358-370
12. Kawarizadeh A., Bourauel C., and Jäger A. Experimental and numerical determination of initial tooth mobility and material properties of the periodontal ligament in rat molar specimens. European Journal of Orthodontics 25 (2003) 569-578
13. Ziegler A., Keilig L., Kawarizadeh A., Jäger A., and Bourauel C. Numerical simulation of the biomechanical behaviour of multi-rooted teeth. European Journal of Orthodontics 27 (2005) 333-339
14. Toms S.R., and Eberhardt A.W. A nonlinear finite element analysis of the periodontal ligament under orthodontic tooth loading. American Journal of Orthodontics and Dentofacial Orthopedics 123 (2003) 657-665
15. Natali A.N., Pavan P.G., and Scarpa C. Numerical analysis of tooth mobility: formulation of a non-linear constitutive law for the periodontal ligament. Dental Materials 20 (2004) 623-629
16. Pietrzak G., Curnier A., Botsis J., Scherrer S., Wiskott A., and Belser U. A nonlinear elastic model of the periodontal ligament and its numerical calibration for the study of tooth mobility. Computer Methods in Biomechanics and Biomedical Engineering 5 (2002) 91-100
17. Parfitt G.J. Measurement of the physiological mobility of individual teeth in an axial direction. Journal of Dental Research 39 (1960) 608-618
18. Cattaneo P.M., Dalstra M., and Melsen B. The finite element method: a tool to study orthodontic tooth movement. Journal of Dental Research 84 (2005) 428-433
19. Ona M., and Wakabayashi N. Influence of alveolar support on stress in periodontal structures. Journal of Dental Research 85 (2006) 1087-1091
20. Picton D.C., and Wills D.J. Viscoelastic properties of the periodontal ligament and mucous membrane. Journal of Prosthetic Dentistry 40 (1978) 263-272
21. Menicucci G., Mossolov A., Mozzati M., Lorenzetti M., and Preti G. Tooth-implant connection: some biomechanical aspects based on finite element analyses. Clinical Oral Implants Research 13 (2002) 334-341
22. Maezawa N., Shiota M., Kasugai S., and Wakabayashi N. Three-dimensional stress analysis of tooth/implant-retained long-span fixed dentures. International Journal of Oral and Maxillofacial Implants 22 (2007) 710-718
23. Pini M., Zysset P., Botsis J., and Contro R. Tensile and compressive behaviour of the bovine periodontal ligament. Journal of Biomechanics 37 (2004) 111-119
24. Shibata T., Botsis J., Bergomi M., Mellal A., and Komatsu K. Mechanical behavior of bovine periodontal ligament under tension-compression cyclic displacements. European Journal of Oral Sciences 114 (2006) 74-82
25. DeHoff P.H., and Anusavice K.J. Viscoelastic stress analysis of thermally compatible and incompatible metal-ceramic systems. Dental Materials 14 (1998) 237-245
26. DeHoff, and Anusavice. Shear stress relaxation of dental ceramics determined from creep behavior. Dental Materials 20 (2004) 717-725
27. DeHoff P.H., and Anusavice K.J. Creep functions of dental ceramics measured in a beam-bending viscometer. Dental Materials 20 (2004) 297-304
28. De Jager N., Pallav P., and Feilzer A.J. Finite element analysis model to simulate the behavior of luting cements during setting. Dental Materials 21 (2005) 1025-1032
29. Garriga-Majo D., Paterson R.J., Curtis R.V., Said R., Wood R.D., and Bonet J. Optimisation of the superplastic forming of a dental implant for bone augmentation using finite element simulations. Dental Materials 20 (2004) 409-418
30. Xu X., Eng M., Zheng Y., and Eng D. Comparative study of torsional and bending properties for six models of nickel-titanium root canal instruments with different cross-sections. Journal of Endodontics 32 (2006) 372-375
31. Mahmoud A.A., Wakabayashi N., and Takahashi H. Prediction of permanent deformation in cast clasps for denture prostheses using a validated nonlinear finite element model. Dental Materials 23 (2007) 317-324
32. Mahmoud A. Pre-overloading to extend fatigue life of cast clasps. Journal of Dental Research 86 (2007) 868-872
33. Magne P., and Belser U.C. Rationalization of shape and related stress distribution in posterior teeth: a finite element study using nonlinear contact analysis. International Journal of Periodontics and Restorative Dentistry 22 (2002) 425-433
34. Dejak B., Mlotkowski A., and Romanowicz M. Finite element analysis of stresses in molars during clenching and mastication. Journal of Prosthetic Dentistry 90 (2003) 591-597
35. Dejak B., Mlotkowski A., and Romanowicz M. Finite element analysis of mechanism of cervical lesion formation in simulated molars during mastication and parafunction. Journal of Prosthetic Dentistry 94 (2005) 520-529
36. Muraki H., Wakabayashi N., Park I., and Ohyama T. Finite element contact stress analysis of the RPD abutment tooth and periodontal ligament. Journal of Dentistry 32 (2004) 659-665
37. Merz B.R., Hunenbart S., and Belser U.C. Mechanics of the implant-abutment connection: an 8-degree taper compared to a butt joint connection. International Journal of Oral and Maxillofacial Implants 15 (2000) 519-526
38. Perriard J., Wiskott W.A., Mellal A., Scherrer S.S., Botsis J., and Belser U.C. Fatigue resistance of ITI implant-abutment connectors-a comparison of the standard cone with a novel internally keyed design. Clinical Oral Implants Research 13 (2002) 542-549
39. Bozkaya D., and Müftü S. Mechanics of the tapered interference fit in dental implants. Journal of Biomechanics 36 (2003) 1649-1658
40. Lang L.A., Kang B., Wang R.F., and Lang B.R. Finite element analysis to determine implant preload. Journal of Prosthetic Dentistry 90 (2003) 539-546
41. Alkan I., Sertgoz A., and Ekici B. Influence of occlusal forces on stress distribution in preloaded dental implant screws. Journal of Prosthetic Dentistry 91 (2004) 319-325
42. Kitagawa T., Tanimoto Y., Odaki M., Nemoto K., and Aida M. Influence of implant/abutment joint designs on abutment screw loosening in a dental implant system. Journal of Biomedical Materials Research: Part B, Applied Biomaterials 75 (2005) 457-463
43. Lin C.L., and Wang J.C. Nonlinear finite element analysis of a splinted implant with various connectors and occlusal forces. The international Journal of Oral Maxillofacial Implants 18 (2003) 331-340
44. Lin C.L., Wang J.C., and Kuo Y.C. Numerical simulation on the biomechanical interactions of tooth/implant-supported system under various occlusal forces with rigid/non-rigid connections. Journal of Biomechanics 39 (2006) 453-463
45. Lin C.L., Chang S.H., Wang J.C., and Chang W.J. Mechanical interactions of an implant/tooth-supported system under different periodontal supports and number of splinted teeth with rigid and non-rigid connections. Journal of Dentistry 34 (2006) 682-691
46. Lin C.L., Chang S.H., Chang W.J., and Kuo Y.C. Factorial analysis of variables influencing mechanical characteristics of a single tooth implant placed in the maxilla using finite element analysis and the statistics-based Taguchi method. European Journal of Oral Sciences 115 (2007) 408-416
47. Iplikçioǧlu H., Akça K., Cehreli M.C., and Sahin S. Comparison of non-linear finite element stress analysis with in vitro strain gauge measurements on a Morse taper implant. International Journal of Oral and Maxillofacial Implants 18 (2003) 258-265
48. Akça K., Cehreli M.C., and Iplikçioǧlu H. Evaluation of the mechanical characteristics of the implant-abutment complex of a reduced-diameter morse-taper implant. A nonlinear finite element stress analysis. Clinical Oral Implants Research 14 (2003) 444-454
49. Cehreli M.C., Akça K., and Iplikçioǧlu H. Force transmission of one- and two-piece morse-taper oral implants: a nonlinear finite element analysis. Clinical Oral Implants Research 15 (2004) 481-489
50. Chun H.J., Shin H.S., Han C.H., and Lee S.H. Influence of implant abutment type on stress distribution in bone under various loading conditions using finite element analysis. International Journal of Oral and Maxillofacial Implants 21 (2006) 195-202
51. Martin W.C., Woody R.D., Miller B.H., and Miller A.W. Implant abutment screw rotations and preloads for four different screw materials and surfaces. Journal of Prosthetic Dentistry 86 (2001) 24-32
52. Bolind P.K., Johansson C.B., Becker W., Langer L., Sevetz Jr. E.B., and Albrektsson T.O. A descriptive study on retrieved non-threaded and threaded implant designs. Clinical Oral Implants Research 16 (2005) 447-455
53. Ferrari M., Vichi A., and García-Godoy F. Clinical evaluation of fiber-reinforced epoxy resin posts and cast post and cores. American Journal of Dentistry 13 (2000) 15B-18B
54. Hubsch P.F., Middleton J., and Knox J. A finite element analysis of the stress at the restoration-tooth interface, comparing inlays and bulk fillings. Biomaterials 21 (2000) 1015-1019
55. Lin C.L., Chang C.H., Wang C.H., Ko C.C., and Lee H.E. Numerical investigation of the factors affecting interfacial stresses in an MOD restored tooth by auto-meshed finite element method. Journal of Oral Rehabilitation 28 (2001) 517-525
56. Lin C.L., Lee H.E., Wang C.H., and Chang K.H. Integration of CT, CAD system and finite element method to investigate interfacial stresses of resin-bonded prosthesis. Computer Methods and Programs in Biomedicine 72 (2003) 55-64
57. Lin C.L., Chang Y.H., Chang W.J., and Cheng M.H. Evaluation of a reinforced slot design for CEREC system to restore extensively compromised premolars. Journal of Dentistry 34 (2006) 221-229
58. Duyck J., Rønold H.J., Van Oosterwyck H., Naert I., Vander Sloten J., and Ellingsen J.E. The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental study. Clinical Oral Implants Research 12 (2001) 207-218
59. Ikeda T., Wakabayashi N., Ona M., and Ohyama T. Effects of polymerization shrinkage on the interfacial stress at resin-metal joint in denture-base: a non-linear FE stress analysis. Dental Materials 22 (2006) 413-419
60. Fennis W.M., Kuijs R.H., Barink M., Kreulen C.M., Verdonschot N., and Creugers N.H. Can internal stresses explain the fracture resistance of cusp-replacing composite restorations?. European Journal of Oral Sciences 113 (2005) 443-448
61. Couegnat G., Fok S.L., Cooper J.E., and Qualtrough A.J. Structural optimization of dental restorations using the principle of adaptive growth. Dental Materials 22 (2006) 3-12
62. Ichim I., Li Q., Loughran J., Swain M.V., and Kieser J. Restoration of non-carious cervical lesions. Part I. Modelling of restorative fracture. Dental Materials 23 (2007) 1553-1561
63. Ichim I.P., Schmidlin P.R., Li Q., Kieser J.A., and Swain M.V. Restoration of non-carious cervical lesions. Part II. Restorative material selection to minimize fracture. Dental Materials 23 (2007) 1562-1569