Machining and ceramic/ceramic joining to form internal mesoscale channels

International Journal of Applied Ceramic Technology

Volumn 1, Issue 1, 2004, Pages 95-103

  Case, Eldon D ^a   Ren, Fei ^a   Kwon, Patrick ^a   Kok, Chee Kuang ^a   Rachedi, Robert ^a   Klenow, Bradley ^a  

^a Michigan State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BRITTLENESS; ETCHING; JOINING; LASER APPLICATIONS; MICROMACHINING; SINTERED ALUMINA; SINTERING; SURFACE PROPERTIES; SURFACE TREATMENT;

CERAMIC CERAMIC JOINING; INTERNAL MESOSCALE CHANNELS; LASER MACHINING; SURFACE CHANNELS; WET CHEMICAL ETCHING;

CERAMIC MATERIALS;

EID: 8444241547     PISSN: 1546542X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1744-7402.2004.tb00159.x     Document Type: Article

References (55)

1. P. Wilding, J. Pfahler, H. H. Bau, J. N. Zemel and L. J. Kricka, "Manipulation and Flow of Biological-Fluids in Straight Channels Micromachined in Silicon," [i Clin. Chem. i], 40 [1] 43-47 (1994).
2. S.J. Qin and W.J. Li, "Micromachining of Complex Channel Systems in 3D Quartz Substrates Using Q-Switched Nd:Yag Laser," [i Appl. Phys. A-Mater. Sci. Process. i], 74 [6] 773-777 (2002).
3. Q. S. Pu, R. Luttge, H. J. G. E. Gardeniers and A. van den Berg, "Comparison of Capillary Zone Electrophoresis Performance of Powder-Blasted and Hydrogen Fluoride-Etched Microchannels in Glass," [i Electrophoresis i], 24 [1-2] 162-171 (2003).
4. M. Le Berre, S. Launay, V. Sartre and M. Lallemand, "Fabrication and Experimental Investigation of Silicon Micro Heat Pipes for Cooling Electronics," [i J. Micromech. Microeng. i], 13 [3] 436-441 (2003).
5. S. Belhardj, S. Mimouni, A. Saidane, and A. Benzohra, "Using Microchannels to Cool Microprocessors: A Transmission-Line-Matrix Study," [i Microelectron. J. i], 34 [4] 247-253 (2003).
6. G. Hestroni, A. Mosyak, Z. Segal, and G. Ziskind, "A Uniform Temperature Heat Sink for Cooling of Electronic Devices," [i Int. J. Heat Mass Transf. i], 45 3275-3286 (2002).
7. J. Schutze, H. Ilgen, and W. R. Fahrner, "An Integrated Micro Cooling System for Electronic Circuits," [i IEEE Trans. Ind. Electron. i], 48 [2] 281-285 (2001).
8. G. Hestroni, A. Mosyak, and Z. Segal, "Nonuniform Temperature Distributions in Electronic Devices Cooled by Flow in Parallel Microchannels," IEEE [i Trans. Components Packaging Technol. i] 24 [1] 16-23 (2001).
9. C. Perret, J. Boussey, C. Schaeffer and M. Coyaud, "Analytic Modeling, Optimization, and Realization of Cooling Devices in Silicon Technology," [i IEEE Trans. Compon. Packaging Technol. i], 23 [4] 665-672 (2000).
10. Hoelke, H. T. Henderson, F. M. Gerner and M. Kazmierczak, "Analysis of the Heat Transfer Capacity of a Micromachined Loop Heat Pipe," [i ASME Heat Transfer Div i], 364 [3] 53-60 (1999).
11. D. B. Tuckerman and R. F. W. Pease, "High Performance Heat Sinking for VLSI," [i Electron Device Letters i], 2 [5] 126-129 (1981).
12. G. D'Arrigo, C. Spinella, G. Arena and S. Lorenti, "Fabrication of Miniaturised Si-Based Electrocatalytic Membranes," [i Mater. Sci. Eng. C-Biomimetic Supramol. Syst. i], 23 [1-2] 13-18 (2003).
13. R. A. Boudreau, H. Han, M. Kadar-Kallen, and J. R. Rowlette, "Kinematic Mounting of Optical and Optoelectronic Elements on Silicon Waferboard," [i U. S. Patent Number: 362625 i], 1994.
14. S. Tan, R. Bourdreau and M. L. Reed, "Effects of Mask Misalignment and Water Misorientation on Silicon V-Groove Etching," [i Sensors and Materials i], 15 101-112 (2003).
15. M. B. Kleiner, S. A. Kuhn and K. Haberger, "High Performance Forced Air Cooling Scheme Employing Microchannel Heat Exchangers," [i IEEE Trans Compon. Packag. Manuf. Technol. Part A i], 18 [4] 795-804 (1995).
16. J. W. Coleman and S. Garimella, "Characterization of Two-Phase Flow Patterns in Small Diameter Round and Rectangular Tubes," [i Int. J. Heat Mass Transf. i], 42 [15] 2869-2881 (1999).
17. J. Pfahler, J. Harley, H. Bau, and J. Zemel, "Liquid Transport in Micron and Submicron Channels," [i Sens. Actuator A-Phys. i], 22 [1-3] 431-434 (1990).
18. J. G. Lee and E. D. Case, "Joining Ceramics to Produce Components with Precise Internal Channels," in [i Innovative Processing and Synthesis of Glass, Composite, and Ceramic Materials III, Ceramic Transactions i], 108 433-442, edited by J.P. Singh, N.P. Bansal, and K. Niihara. American Ceramic Society Inc., Westerville, OH, 2000.
19. J. G. Lee and E. D. Case, "Joining of Non-Oxide Ceramics Using Conventional and Microwave Heating," in [i Ceramic Engineering and Science Proceedings i], 21 [4] 589-597, edited by T. Jessen and E. Ustundag. American Ceramic Society Inc., Westerville, OH, 2000.
20. H. W. Shin, P. Kwon and E. D. Case, "Joining zirconia, Alumina and HAP Bioceramics," in [i Ceramics Transactions i], 138 149-158, edited by C. A. Lewinsohn, M. Singh and R. Loehman, American Ceramic Society, Westerville OH, 2003.
21. H. W. Shin, E. D. Case, and P. Kwon, "Fabrication of Internal Channels in Ceramics and Ceramic Composites," [i Journal of Advanced Materials i], 35 [2] 28-35 (2003).
22. K. N. Seiber, K. Y. Lee, and E. D. Case, "Microwave and Conventional Joining of Ceramics Using Spin-On Materials," 941-949 in [i Proceedings of the 12th Annual Advanced Composites Conference i], edited by R. F. Gibson and G. M. Newaz, Technomic Publishing Co., Lancaster, PA, 1997.
23. H. W. Shin, P. Kwon and E. D. Case, "Fabrication of Internal Channels Without Machining in Joined Alumina and Zirconia Ceramics," 23-30 in [i Joining of Advanced and Specialty Materials III i]., edited by M. Singh. ASM International, Materials Park, OH, 2001.
24. E. D. Case, K. Y. Lee, J. G. Lee, and T. Hoepfner, "Geometrical Stability of Holes and Channels During Joining of Ceramics and Ceramic Composites," 27-34 in [i Joining of Advanced and Specialty Materials i], Edited by M. Singh, J. E. Indacochea, and D. Hauser. ASM International, Materials Park, OH, 1998.
25. E. D. Case and M. A. Crimp, "Joining of Ceramic Materials Using Spin on Interlayers," [i Advanced Engineering Materials i], 3 395-399 (2001).
26. H. W. Shin, E. D. Case, and P. Kwon, "Joining Bioactive and Bioinert Ceramics," 15-22 in [i Joining of Advanced and Specialty Materials III i], edited by M. Singh. ASM International, Materials Park, OH, 2001.
27. J. G. Lee and E. D. Case, "Microwave Joining of Particulate Composites," in [i Advances in Ceramic Matrix Composites V, Ceramic Transactions i] 103 571-581, edited by N.P. Bansal, J.P.Singh and E. Ustundag. American Ceramic Society, Inc., Westerville, OH, 2000.
28. J. G. Lee, H. W. Shin, E. D. Case and P. Kwon, "The Fabrication of Smooth, Submilliter-Diameter Channels in Polycrystalline Ceramics Without Machining," [i Journal of Materials Science Letters i], 20 [2] 107-109 (2001).
29. H. W. Shin, P. Kwon and E. D. Case, "Novel Powder Processing Techniques to Fabricate Efficient Meso-Scale Heat Exchange," 30 671-679 in [i Transactions of the North American Manufacturing Research Institution of SME i], 2002.
30. P. Kwon, C. K. Kok, D. Fickes, C. W. Somerton, H. W. Shin and E. D. Case, "Issues in Joining of Ceramic Micro-Heat Exchangers," 138 209-219 in [i Ceramics Transactions i], edited by C. A. Lewinsohn, M. Singh and R. Loehman. American Ceramic Society, Westerville OH, 2003.
31. T. Fukasawa, Z. Y. Zeng, M. Ando, T. Ohji and Y. Goto, "Pore Structure of Porous Ceramics Synthesized from Water-Based Slurry by Freeze-Dry Process," [i J. Mater. Sci. i], 36 [10] 2523-2527 (2001).
32. T. Fukasawa, Z. Y. Deng, M. Ando, T.Ohji, and S. Kanzaki, "Synthesis of Porous Silicon Nitride with Unidirectionally Aligned Channels Using Freeze-Drying Process," [i J. Am. Ceram. Soc i], 85 2151-2155 (2002).
33. T. Jessen, "Channeled Ceramic Structure and Process for Making Same," [i US Pat.5858513 i], 1999.
34. G. J. Zhang, J. F. Yang and T. Ohji, "Fabrication of Porous Ceramics with Unidirectionally Aligned Continuous Pores," [i J. Am. Ceram. Soc. i], 84 1395-1397 (2001).
35. C. Van Hoy, A. Barda, M. Griffith and J. W. Halloran, "Microfabrication of Ceramics by Co-Extrusion," [i J. Am. Ceram. Soc. i], 81 152-158 (1998).
36. D. J. Draeger and E. D. Case, "The Modification of the Surface Topology of Channels in Fully Stabilized Zirconia, as Observed Using Laser Scanning Confocal Microscopy," [i Materials Letters i], 55 [1-2] 88-92 (2002).
37. D. J. Draeger and E. D. Case, "Engineering the Surface Texture and Shape of Channels in Ceramic Substrates," [i Materials Science and Engineering B i], 97 [1] 94-105 (2003).
38. D. Sciti and A. Bellosi, "Laser Micromachining of Silicon Carbide," in [i Euro Ceramics VII Pt.1. Key Engineering Materials i], 206-213 305-308, edited by C. Kermel, V. Lardot, D. Libert and I. Urbain. Trans Tech Publications, Switzerland, 2002.
39. D. Guo, K. Cai, J.L. Yang and Y. Huang, "Spatter-Free Laser Drilling of Alumina Ceramics Based on Gelcasting Technology," [i J. European Ceram. Soc. i], 23 [8] 1263-1267 (2003).
40. S. J. Paik, J. Kim, S. Park, S. Kim, C. Koo, S. K, Lee and D. Cho, "Novel Micromachining Technique to Fabricate Released Gaas Microstructures with a Rectangular Cross Section," [i Jpn. J. Appl. Phys., Part 1 i], 42 [1] 326-332 (2003).
41. C. M. Yu and W. C. Hui, U. S. Patent Number 5575929, 1996.
42. S. G. Kandlikar, and W. J. Grande, "Evolution of Microchannel Flow Passages - Thermohydraulic Performance and Fabrication Technology," [i Heat Transf. Eng. i], 24 [1] 3-17 (2003).
43. S. D. Nunn, O. O. Omatete, C. A. Walls and D. L. Barker, "Tensile Strength of Dried Gel-Cast Green Bodies," [i Ceram.Eng.Sci.Proc. i], 15 [4] 493-498 (1994).
44. S. D. Nunn and G. H. Kirby, "Green Machining of Gelcast Ceramic Materials," [i Ceram.Eng.Sci.Proc. i], 17 [3] 209-213 (1996 ).
45. M. A. Janney, W. J. Ren, G. H. Kirby, S. D. Nunn and S. Viswanathan, "Gelcast Tooling: Net Shape Casting and Green Machining," [i Mater. Manuf. Process. i], 13 [3] 389-403 (1998b).
46. M. D. Vlajic and K. D. Krstic, "Strength and Machining of Gelcast SiC Ceramics," [i J. Mater. Sci. i], 37 [14] 2943-2947 (2002).
47. J. K. Montgomery, P. L. Drzal, K. R. Shull, and K. T. Faber, "Thermoreversible Gelcasting: A Novel Ceramic Processing Technique," [i J. Am. Ceram. Soc. i], 85 [5] 1164-1168 (2002).
48. H. Varma, S. P. Vijayan and S. S. Babu, "Transparent Hydroxyapatite Ceramics Through Gelcasting and Low-Temperature Sintering," [i J. Am. Ceram. Soc. i], 85 [2] 493-495 (2002).
49. R. K. Kamboj, S. Dhara and P. Bhargava, "Machining Behaviour of Green Gelcast Ceramics," [i J. European Ceram. Soc. i], 23 [7] 1005-1011 (2003).
50. D. Hardy and D. J. Green, "Mechanical Properties of a Partially Sintered Alumina," [i Journal of the European Ceramic Society i], 15 769-775 (1995).
51. R. M. German, [i Sintering Theory and Practice i], John Wiley and Sons, New York, 99-101 1996.
52. H. W. Shin, E. D. Case, P. Kwon, F. Ren and C. K. Kok, "Machining and joining to Form Complex Internal Meso-Scale Channels in Ceramic Oxides," accepted for publication, Ceramic Engineering and Science Proceedings.
53. K. Y. Lee, E. D. Case and D. Reinhard, "Microwave Joining and Repair of Ceramics and Ceramic Composites," [i Ceramic Eng. and Sci. Proc. i], 18 543-550 (1997).
54. L. Zeng, E. D. Case and M. A. Crimp, "Effects of a Silica Spin-On Interlayer and Heating Mode on the Joining Of Zirconia and MaCor," [i Materials Science and Engineering i], in press.
55. L. Zeng, M. A. Crimp and E. D. Case, "The Interfacial Microstructure of Joined Single Crystal and Polycrystalline Alumina," [i Materials Science and Engineering i], in press.