Simultaneous study of cure kinetics and rheology of montmorillonite/vinyl ester resin nanocomposites

Polymers for Advanced Technologies

Volumn 23, Issue 3, 2012, Pages 534-544

  Akhlaghi, Shahin ^a   Kalaee, Mohammadreza ^a   Jowdar, Effat ^a   Nouri, Ali ^b   Mazinani, Saeedeh ^c   Afshari, Mehdi ^d   Famili, Mohamadhosein Navid ^e   Amini, Navid ^a   Behrouz, Toktam ^a  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

^b ISLAMIC AZAD UNIVERSITY   (Iran)

^c AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

^d NORTH CAROLINA STATE UNIVERSITY   (United States)

^e TARBIAT MODARES UNIVERSITY   (Iran)

Author keywords

Cure kinetics; Mechanical properties; Morphology; Nanocomposite; Rheology; Vinyl ester resin

Indexed keywords

CURE BEHAVIOR; CURE KINETICS; CURE REACTIONS; D-SPACING; ESTER RESINS; IMPACT ANALYSIS; KINETIC ANALYSIS; MECHANICAL CHARACTERIZATIONS; MECHANICAL RESPONSE; MORPHOLOGICAL CHARACTERIZATION; NANO CLAYS; PHASE MORPHOLOGY; QUATERNARY AMMONIUM SALT; RHEOLOGICAL CHARACTERISTICS; RHEOMETRY; VINYL ESTER RESIN;

ATOMIC FORCE MICROSCOPY; CHEMISORPTION; CROSSLINKING; CURING; ELASTICITY; ESTERS; IMAGE PROCESSING; KINETICS; MECHANICAL PROPERTIES; MORPHOLOGY; PHYSISORPTION; RESINS; RHEOLOGY; TENSILE STRENGTH; TRANSMISSION ELECTRON MICROSCOPY;

NANOCOMPOSITES;

EID: 83555167228     PISSN: 10427147     EISSN: 10991581     Source Type: Journal    
DOI: 10.1002/pat.1912     Document Type: Article

References (45)

1. H. Mirzazadeh, A. A. Katbab, Polym Adv Technol. 2006, 17, 975-980.
2. M. E. Romero-Guzman, A. Romo-Uribe, E. Ovalle-Garcia, R. Olayo, C. A. Cruz-Ramos, Polym Adv Technol. 2008, 19, 1168-1176.
3. X. P. Wang, A. Huang, D. Jia, Y. Li., Eur Polym J. 2008, 44, 2784-2789.
4. E. S. Kim, J. H. Shim, S. H. Jung, J. H. Joo, J. S. Yoon, S. H. Lee, Polym Int. 2010, 59, 479-485.
5. D. Wang, C. A. Wilkie, Polym Degr Stabil. 2003, 82, 309-315.
6. J. Zhang, D. D. Jiang, D. Wang, C. A. Wilkie, Polym Adv Technol. 2005, 16, 800-806.
7. M. Bartholmai, B. Schartel, Polym Adv Technol. 2004, 15, 355-364.
8. L. A. Utracki, M. Sepehr, E. Boccaleri, Polym Adv Technol. 2007, 18, 1-37.
9. B. Schartel, U. Knoll, A. Hartwig, D. Putz., Polym Adv Technol. 2006, 281-293.
10. E. Pollet, C. Delcourt, M. Alexandre, P. Dubois, Eur Polym J. 2006, 42, 1330-1341.
11. Z. Liang, J. Yin, J. Wu, Z. Qiu, F. He, Eur Polym J. 2004, 40, 307-314.
12. S. Dua, R. L. Mccullough, G. R. Palmese, Polym Compos. 1999, 20, 379-391.
13. M. A. Stone, B. K. Fink, T. A. Bogetti, J. W. Gillespie, Polym Eng Sci. 2000, 40, 2489-2497.
14. M. Frigione, E. Calo, A. Maffezzoli, C. Carfagna, G. Malucelli, Macromol Chem Phys. 2004, 205, 2175-2184.
15. D. Yebassa, S. Balakrishnan, E. Feresenbet, D. Raghavan, P. R. Start, S. D. Hudson, J Polym Sci A Polym Chem. 2004, 42, 1310-1321.
16. J. Gefu, L. Guoqiang, Mater Sci Eng A. 2008, 498, 327-334.
17. A. D. Drozdov, J. C. Christiansen, R. K. Gupta, A. P. Shah, J Polym Sci B Polym Phys. 2003, 41, 476-492.
18. A. P. Shah, R. K. Gufta, H. V. S. Gangarao, C. E. Powell, Polym Eng Sci. 2002, 42, 1852-1863.
19. R. Thomas, S. Durix, C. H. Sinturel, T. Omonov, S. Goossens, G. Groeninckx, P. Moldenaers, S. Thomas, Polymer 2007, 48, 1695-1710.
20. J. H. Lee, J. W. Lee, Polym Eng Sci. 1994, 34, 742-749.
21. B. G. Min, Z. H. Stachurski, J. H. Hodgkin, Polymer. 1993, 34, 4488-4495.
22. M. R. Kalaee, M. H. N. Famili, H. Mahdavi, Polym Plast Technol Eng. 2009, 48, 627-632.
23. T. B. Tollea, D. P. Anderson, Compos Sci Technol 2002, 62, 1033-1041.
24. H. P. Klug, L. E. Alexander, X-Ray Diffraction Procedures. John Wiley Inc, New York, 1974, 261.
25. Ch. Chen, D. Curliss, J Appl Polym Sci. 2003, 90, 2276-2287.
26. A. B. Morgan, J. W. Gilman, J Appl Polym Sci. 2003, 87, 1329-1338.
27. D. Wang, S. Fujinami, K. Nakajima, S. H. Inukai, H. Ueki, A. Magario, T. Noguchi, M. Endo, T. Nishi, Polymer. 2010, 51, 2455-2459.
28. D. Choi, M. Abdul Kader, B. H. Cho, Y. Huh, C. H. Nah, J Appl Polym Sci. 2005, 98, 1688-1696.
29. D. Raghavan, M. Van Landingham, X. Gu, T. Nguyen, Langmuir 2000, 16, 9448-9459.
30. J. K. Mishra, I. Kim, C. S. Ha, Macromol Rapid Commun. 2003, 24, 671-675.
31. M. Lu, M. Shim, S. Kim, Polym Eng Sci. 1999, 39, 274-285.
32. M. Harsch, J. Z. Karger-Kocsis, M. Holst, Eur Polym J 2007, 43, 1168-1178.
33. D. Aussawasathien, E. Sancaktar, Macromol Symp. 2008, 264, 26-33.
34. T. Zhou, M. Gu, Y. Jin, J. Wang, J Polym Sci A Polym Chem. 2006, 44, 371-379.
35. A. Yousefi, P. G. Lafleur, R. Gauvin, Polym Compos. 1997, 18, 157-168.
36. A. D. Rogers, P. Lee-Sullivan, Polym Eng Sci. 2003, 43, 14-25.
37. T. A. Bullions, J. E. Mcgrath, A. C. Loos, Polym Eng Sci 2002, 42, 1058-1069.
38. E. G. Karayannidou, D. S. Achilias, I. D. Sideridou, Eur Polym J. 2006, 42, 3311-3323.
39. A. Omrani, L. C. Simon, A. A. Rostami, M. Ghaemy, Eur Polym J. 2008, 44, 769-779.
40. M. Fischer, D. T. Chieu, Anal Chem. 1999, 71, 953-959.
41. V. I. Vettegren, S. V. Bronnikov, S. Y. Frenkel, Polym Sci USSR. 1984, 26, 1046-1054.
42. H. S. Y. Hsich, J Appl Polym Sci. 1982, 27, 3265-3277.
43. D. Chen, P. He, Compos Sci Technol. 2004, 64, 2501-2507.
44. Y. P. Wu, Q. X. Jia, D. S. Yu, L. Q. Zhang, Polym Test. 2004, 23, 903-909.
45. E. Fekete, S. Z. Molnar, G. M. Kim, G. H. Michler, B. Pukanszky, J Macromol Sci B. 1999, 38, 885-899.