Engineering tissue with BioMEMS

IEEE Pulse

Volumn 2, Issue 6, 2011, Pages 28-34

  Borenstein, Jeffrey T ^a   Vunjak Novakovic, Gordana ^b  

^a CHARLES STARK DRAPER LABORATORY   (United States)

^b Columbia University ^*  (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BIOLOGICAL MICRO-ELECTROMECHANICAL SYSTEMS (BIOMEMS); BIOMEMS; BIOMEMS DEVICES; CLINICAL DIAGNOSTICS; DESIGN PRINCIPLES; FABRICATION TECHNIQUE; GENOMICS; IMPLANTABLE DRUG DELIVERY SYSTEMS; LAB-ON-A-CHIP DEVICES; MICRO-SCALES; POINT-OF-CARE DIAGNOSTICS; PROTEOMICS;

BIOMATERIALS; DRUG DELIVERY; MEMS; MICROELECTROMECHANICAL DEVICES; MOLECULAR BIOLOGY; TISSUE;

TISSUE ENGINEERING;

ARTICLE; ARTIFICIAL KIDNEY; BIOREACTOR; HUMAN; MICROELECTROMECHANICAL SYSTEM; MICROFLUIDIC ANALYSIS; TISSUE ENGINEERING;

BIOREACTORS; HUMANS; KIDNEY, ARTIFICIAL; MICRO-ELECTRICAL-MECHANICAL SYSTEMS; MICROFLUIDIC ANALYTICAL TECHNIQUES; TISSUE ENGINEERING;

EID: 83455253663     PISSN: 21542287     EISSN: None     Source Type: Journal    
DOI: 10.1109/MPUL.2011.942764     Document Type: Article

References (53)

1. J. P. Vacanti and R. Langer, "Tissue engineering: The designand fabrication of living replacement devices for surgicalreconstruction and transplantation," Lancet, vol. 354 (Suppl. 1),pp. SI32-SI34, 1999. (Pubitemid 29355800)
2. T. P. Richardson, M. C. Peters, A. B. Ennett, and D. J. Mooney,"Polymeric system for dual growth factor delivery," Nat. Biotechnol.,vol. 19, pp. 1029-1034, 2001. (Pubitemid 33041886)
3. S. Levenberg, J. S. Golub, M. Amit, J. Itskovitz-Eldor, and R.Langer, "Endothelial cells derived from human embryonic stemcells," Proc. Nat. Acad. Sci. USA, vol. 99, no. 7, pp. 4391-4396, 2002. (Pubitemid 34285995)
4. K. M. Chrobak, D. R. Potter, and J. Tien, "Formation of perfused,functional microvascular tubes in vitro," Microvasc. Res., vol. 71,no. 3, pp. 185-196, 2006. (Pubitemid 43794856)
5. L. M. Bellan, S. P. Singh, P. W. Henderson, T. J. Porri, H. G.Craighead, and J. A. Spector, "Fabrication of an artificial 3-dimensionalvascular network using sacrificial sugar structures,"Soft Matter, vol. 5, no. 7, pp. 1354-1357, 2009.
6. J.-H. Huang, J. Kim, N. Agrawal, A. P. Sudarsan, J. E. Maxim,A. Jayaraman, and V. M. Ugaz, "Rapid fabrication of bio-inspired3D microfluidic vascular networks," Adv. Mater., vol. 21, no. 5,pp. 3567-3571, 2009.
7. J. T. Borenstein, M. M. Tupper, P. J. Mack, E. J. Weinberg, A. S.Khalil, H. Hsiao, and G. Garcia-Cardena, "Functional endothelializedmicrovascular networks with circular cross-sectionsin a tissue culture substrate," Biomed. Microdev., vol. 12, no. 1,pp. 71-79, 2010.
8. J. Jeon, S. Chung, R. Kamm, and J. Charest, "Hot embossing forfabrication of a microfluidic 3D cell culture platform," Biomed.Microdev., vol. 13, no. 2, pp. 325-333, 2011.
9. J. T. Borenstein, H. Terai, K. R. King, E. J. Weinberg, M. R.Kaazempur-Mofrad, and J. P. Vacanti, "Microfabrication technologyfor vascularized tissue engineering," Biomed. Microdev.,vol. 4, no. 3, pp. 167-175, 2002. (Pubitemid 34823408)
10. C. Fidkowski, M. R. Kaazempur-Mofrad, J. Borenstein, J. P. Vacanti,R. Langer, and Y. Wang, "Endothelialized microvasculaturebased on a biodegradable elastomer," Tissue Eng., vol. 11,no. 1-2, pp. 302-309, 2005.
11. J. V. Green, T. Kniazeva, M. Abedi, D. S. Sokhey, M. E. Taslim,and S. K. Murthy, "Effect of channel geometry on cell adhesion inmicrofluidic devices," Lab Chip, vol. 9, no. 5, pp. 677-685, 2009.
12. G. J. Wang, C.-C. Hsueh, S.-H. Hsu and H.-S. Hung, "Fabricationof PLGA microvessel scaffolds with circular microchannelsusing soft lithography," J. Micromech. Microeng., vol. 17, no. 10,pp. 2000-2005, 2007. (Pubitemid 47469906)
13. J. P. Camp, T. Stokol, and M. L. Shuler, "Fabrication of a multiplediameterbranched network of microvascular channels with semicircularcross-sections using xenon difluoride etching," Biomed.Microdev., vol. 10, no. 2, pp. 179-186, 2008. (Pubitemid 351337920)
14. M. Abdelgawad, C. Wu, W. Y. Chien, W. R. Geddie, M. A. Jewett,and Y. Sun, "A fast and simple method to fabricate circular microchannelsin polydimethylsiloxane (PDMS)," Lab Chip, vol. 11,no. 3, pp. 545-551, 2011.
15. D. A. LaVan, P. M. George, and R. Langer, "Simple, three-dimensionalmicrofabrication of electrodeposited structures," Angew.Chem. Int. Ed., vol. 42, no. 11, pp. 1262-1265, 2003.
16. M. J. Powers, K. Domansky, M. R. Kaazempur-Mofrad, A. Kalezi,A. Capitano, A. Upadhyava, P. Kurzawski, K. E. Wack, D. B. Stolz,R. Kamm, and L. G. Griffith, "A microfabricated array bioreactorfor perfused 3D liver culture," Biotechnol. Bioeng., vol. 78, no. 3,pp. 257-269, 2002. (Pubitemid 34712370)
17. S. R. Khetani and S. N. Bhatia, "Microscale culture of humanliver cells for drug development," Nat. Biotechnol., vol. 26, no. 1,pp. 120-126, 2008.
18. E. E. Hui and S. N. Bhatia, "Micromechanical control of cell-cellinteractions," Proc. Nat. Acad. Sci. USA, vol. 104, no. 14, pp. 5722-5726, 2007. (Pubitemid 47175601)
19. E. Leclerc, Y. Sakai, and T. Fujii, "Cell culture in 3-dimensionalmicrofluidic structure of PDMS," Biomed. Microdev., vol. 5, no. 2,pp. 109-14, 2003. (Pubitemid 36986742)
20. A. Carraro, W. M. Hsu, K. M. Kulig, M. L. Miller, M. Kaazempur-Mofrad, E. Weinberg, F. Entabi, H. Albadawi, M. T. Watkins, J.T. Borenstein, J. P. Vacanti, and C. Neville, "In vitro analysis ofa hepatic device with intrinsic microvascular-based channels,"Biomed. Microdev., vol. 10, no. 2, pp. 795-805, 2008.
21. J. H. Sung, J. R. Choi, D. Kim, and M. L. Shuler, " Fluorescenceoptical detection in situ for real-time monitoring ofcytochrome P450 enzymatic activity of liver cells in multiplemicrofluidic devices," Biotechnol. Bioeng., vol. 104, no. 3,pp. 516-525, 2009.
22. P. J. Lee, P. J. Hung, and L. P. Lee, "An artificial liver sinusoidwith a microfluidic endothelial-like barrier for primary hepatocyteculture," Biotechnol. Bioeng., vol. 97, no. 5, pp. 1340-1346,2007. (Pubitemid 47195329)
23. C. J. Bettinger, K. M. Kulig, J. P. Vacanti, R. Langer, and J. T. Borenstein,"Nanofabricated collagen-inspired synthetic elastomersfor primary rat hepatocyte culture," Tissue Eng. Part A, vol. 15,no. 6, pp. 1321-1329, 2009.
24. J.-K. Lee, M. C. Kung, H. H. Kung, and L. F. Mockros, "Microchanneltechnologies for artificial lungs: (3) Open rectangularchannels," ASAIO J., vol. 54, no. 4, pp. 390-395, 2008.
25. K. Burgess, H.-H. Hu, W. Wagner, and W. Federspiel, "Towards microfabricatedbiohybrid artificial lung modules for chronic respiratorysupport," Biomed. Microdev., vol. 11, no. 1, pp. 117-127, 2009.
26. D. M. Hoganson, H. I. Pryor, E. K. Bassett, I. D. Spool, and J. P. Vacanti,"Lung assist device technology with physiologic blood flowdeveloped on a tissue engineered scaffold platform," Lab Chip, vol.11, no. 4, pp. 700-707, 2011.
27. T. Kniazeva, J. C. Hsiao, J. L. Charest, and J. T. Borenstein, "Amicrofluidic respiratory assist device with high gas permeancefor artificial lung applications," Biomed. Microdev., vol. 13, no. 2,pp. 315-323, 2011.
28. J. A. Potkay, M. Magnetta, A. Vinson, and B. Cmolik, "Bio-inspired, efficient, artificial lung employing air as the ventilatinggas," Lab Chip., vol. 11, no. 17, pp. 2901-2909, 2011.
29. D. Huh, H. Fujioka, Y. C. Tung, N. Futai, R. Paine, J. B. Grotberg,and S. Takayama, "Acoustically detectable cellular-level lung injuryinduced by fluid mechanical stresses in microfluidic airway systems,"Proc. Nat. Acad. Sci., vol. 104, no. 48, pp. 18886-18891, 2007.
30. D. Huh, B. D. Matthews, A. Mammoto, M. Montoya-Zavala, H.Y. Hsin, and D. E. Ingber, "Reconstituting organ-level lung functionson a chip," Science, vol. 328, no. 5986, pp. 1662-1668, 2010.
31. K.-J. Jang and K.-Y. Suh, "A multi-layer microfluidic device forefficient culture and analysis of renal tubular cells," Lab Chip,vol. 10, no. 1, pp. 36-42, 2010.
32. N. Ferrell, R. R. Desai, A. J. Fleischman, S. Roy, H. D. Humes, andW. H. Fissell, "A microfluidic bioreactor with integrated transepithelialelectrical resistance (TEER) measurement electrodes forevaluation of renal epithelial cells," Biotechnol. Bioeng., vol. 107,no. 4, pp. 707-716, 2010.
33. W. H. Fissell, A. Dubnisheva, A. N. Eldridge, A. J. Fleischman,A. L. Zydney, and S. Roy, "High-performance silicon nanoporehemofiltration membranes," J. Memb. Sci., vol. 326, no. 1,pp. 58-63, 2009.
34. L. G. Griffith and G. Naughton, "Tissue engineering- Currentchallenges and expanding opportunities," Science, vol. 295, no.5557, pp. 1009-1014, 2002.
35. G. Vunjak-Novakovic and D. T. Scadden, "Biomimetic platformsfor human stem cell research," Cell Stem Cell, vol. 8, no. 3,pp. 252-261, 2011.
36. G. M. Whitesides, E. Ostuni, S. Takayama, X. Jiang, and D. E. Ingber,"Soft lithography in biology and biochemistry," Annu. Rev.Biomed. Eng., vol. 3, pp. 335-373, 2001. (Pubitemid 32928043)
37. S. N. Bhatia, M. L. Yarmush, and M. Toner, "Controlling cell interactionsby micropatterning in co-cultures: Hepatocytes and 3T3fibroblasts," J. Biomed. Mater. Res., vol. 34, no. 2, pp. 189-199, 1997. (Pubitemid 27073810)
38. J. Park, F. Berthiaume, M. Toner, M. L. Yarmush, and A. W.Tilles, "Microfabricated grooved substrates as platforms forbioartificial liver reactors," Biotechnol. Bioeng., vol. 90, no. 5,pp. 632-644, 2005. (Pubitemid 40733992)
39. D. M. Thompson, K. R. King, K. J. Wieder, M. Toner, M. L. Yarmush,and A. Jayaraman, "Dynamic gene expression profilingusing a microfabricated living cell array," Anal. Chem., vol. 76, no.14, pp. 4098-5103, 2004.
40. A. Khademhosseini, J. Yeh, G. Eng, J. Karp, H. Kaji, J. Borenstein,O. C. Farokhzad, and R. Langer, "Cell docking inside microwellswithin reversibly sealed microfluidic channels for fabricatingmultiphenotype cell arrays," Lab Chip, vol. 5, no. 12, pp.1380-1386, 2005. (Pubitemid 41785262)
41. L. Kim, M. D. Vahey, H. Y. Lee, and J. Voldman, "Microfluidicarrays for logarithmically perfused embryonic stem cell culture,"Lab Chip, vol. 6, no. 3, pp. 394-406, 2006. (Pubitemid 43327565)
42. K. Kamei, S. Guo, Z. T. Yu, H. Takahashi, E. Gschweng, C. Suh, X.Wang, J. Tang, J. McLaughlin, O. N. Witte, K. B. Lee, and H. R.Tseng, "An integrated microfluidic culture device for quantitativeanalysis of human embryonic stem cells," Lab Chip, vol. 9, no. 4,pp. 555-563, 2009.
43. E. Figallo, C. Cannizzaro, S. Gerecht-Nir, J. Burdick, R. Langer,N. Elvassore, and G. Vunjak-Novakovic, "Micro-bioreactor arrayfor controlling cellular environments," Lab Chip, vol. 7, no. 6, pp.710-719, 2007. (Pubitemid 46850685)
44. D. J. Beebe, G. A. Mensing, and G. M. Walker, "Physics and applicationsof microfluidics in biology," Annu. Rev. Biomed. Eng.,vol. 4, no. 3, pp. 261-286, 2002.
45. V. Chin, P. Taupin, S. Sanga, J. Scheel, F. H. Gage, and S. N. Bhatia,"Microfabricated platform for studying stem cell fates," Biotechnol.Bioeng., vol. 88, no. 3, pp. 399-415, 2004. (Pubitemid 39524258)
46. D. G. Anderson, S. Levenberg, and R. Langer, "Nanoliter-scale synthesisof arrayed biomaterials and application to human embryonicstem cells," Nat. Biotech., vol. 22, no. 7, pp. 863-866, 2004. (Pubitemid 38886605)
47. E. Cimetta, C. Cannizzaro, N. Elvasore, and G. Vunjak-Novakovic, "Microarray bioreactors for steady-state and transient studiesof stem cells," Methods, vol. 47, no. 2, pp. 81-89, 2009.
48. S. Chung, R. Sudo, P. J. Mack, C. R. Wan, V. Vickerman, and R.D. Kamm, "Cell migration into scaffolds under co-culture conditionsin a microfluidic platform," Lab Chip, vol. 9, no. 2, pp.269-275, 2009.
49. J. Diao, L. Young, S. Kim, E. A. Fogarty, S. M. Heilman, P. Zhou,M. L. Shuler, M. Wu, and M. P. DeLisa, "A three-channel microfluidicdevice for generating static linear gradients and its applicationto the quantitative analysis of bacterial chemotaxis," LabChip, vol. 6, no. 3, pp. 381-388, 2006. (Pubitemid 43327563)
50. S. Toetsch, P. Olwell, A. Prina-Mello, and Y. Volkov, "The evolutionof chemotaxis assays from static models to physiologicallyrelevant platforms," Integr. Biol., vol. 1, no. 2, pp. 170-181, 2009.
51. E. Cimetta, C. Cannizzaro, R. James, T. Biechele, R. Moon, N.Elvassore, and G. Vunjak-Novakovic, "Microfluidics-generatedWnt-3 gradients induce a proportionate response in b-cateninsignalling," Lab Chip, vol. 10, no. 23, pp. 3277-3283, 2010.
52. Y. Zhang, Z. Gazit, G. Pelled, D. Gazit, and G. Vunjak-Novakovic, "Engineering a tissue interface by inducible gene expression,"Integr. Biol., vol. 3, no. 1, pp. 39-47, 2011.
53. J. Y. Park, S. K. Kim, D. H. Woo, E. J. Lee, J. H. Kim, and S. H.Lee, "Differentiation of neural progenitor cells in a microfluidicchip-generated cytokine gradient," Stem Cells, vol. 27, no. 11,pp. 2646-2654, 2009.