Two-phase microchannel heat sinks: Theory, applications, and limitations

Journal of Electronic Packaging

Volumn 133, Issue 4, 2011, Pages

  Mudawar, Issam ^a  

^a PURDUE UNIVERSITY   (United States)

Author keywords

flow boiling; high flux; microchannel

Indexed keywords

CARBON NANOTUBES; COOLING SYSTEMS; ELECTRONIC COOLING; FIGHTER AIRCRAFT; GEOMETRY; HYBRID VEHICLES; MICROCHANNELS; NANOFLUIDICS; ROCKETS; THERMAL MANAGEMENT (ELECTRONICS); TURBOMACHINE BLADES; YARN;

BOILING WATER; FLOW BOILING; HIGH FLUX; LARGE AMOUNTS; MICRO CHANNEL HEAT SINKS; PERFORMANCE; SMALL CHANNELS; THEORY APPLICATIONS; TURBINE BLADE; TWO PHASE;

HEAT SINKS;

EID: 83455186910     PISSN: 10437398     EISSN: 15289044     Source Type: Journal    
DOI: 10.1115/1.4005300     Document Type: Article

References (168)

1. Mudawar, I., 2001, "Assessment of High-Heat-Flux Thermal Management Schemes," IEEE Trans. Compon. Packag. Manuf. Technol., 24, pp. 122-141. (Pubitemid 32609745)
2. Tuckerman, D. B., and Pease, R. F. W., 1981, "High-Performance Heat Sinking for VLSI," IEEE Electronic Devices Lett., 2, pp. 126-129.
3. Kishimito, T., and Ohsaki, T., 1986, "VLSI Packaging Technique Using Liquid-Cooled Channels," IEEE Trans. Compon., Hybrids, Manuf. Technol., 9, pp. 328-335. (Pubitemid 17565394)
4. Phillips, R. J., 1990, "Micro-Channel Heat Sinks," Advances in Thermal Modeling of Electronic Components, A. Bar-Cohen and A. D. Kraus, eds., ASME, New York, NY., Vol. 2, pp. 109-184.
5. Copeland, D., Takahira, H., Nakayama, W., and Pak, B. C., 1995, "Manifold Microchannel Heat Sinks: Theory and Experiment," Advances in Electronic Packaging, EEP-Vol. 10, ASME, pp. 829-835.
6. Choquette, S. F., Faghri, M., Charmchi, M., and Asako, Y., 1996, "Optimum Design of Microchannel Heat Sinks," Micro-Electro-Mechanical Syst.ems (MEMS), DSC-Vol. 59, ASME, pp. 115-126. (Pubitemid 126629448)
7. Yin, X., and Bau, H. H., 1997, "Uniform Channel Micro Heat Exchangers," ASME J. Electron. Packag., 119, pp. 89-93. (Pubitemid 127447137)
8. Kawano, K., Minakami, K., Iwasaki, H., and Ishizuka, M., 1998, "Micro Channel Heat Exchanger for Cooling Electrical Equipment," Application of Heat Transfer in Equipment, Systems and Education, HTD-Vol. 361-3/PIDVol. 3, ASME, pp. 173-180.
9. Lee, D. Y., and Vafai, K., 1999, "Comparative Analysis of Jet Impingement and Microchannel Cooling for High Heat Flux Applications," Int. J. Heat Mass Transfer, 42, pp. 1555-1568. (Pubitemid 29216358)
10. Fedorov, A. G., and Viskanta, R., 2000, "Three-Dimensional Conjugate Heat Transfer in the Microchannel Heat Sink for Electronic Packaging," Int. J. Heat Mass Transfer, 43, pp. 399-415. (Pubitemid 30073970)
11. Qu, W., and Mudawar, I., 2000, "Experimental and Numerical Study of Pressure Drop and Heat Transfer in a Single-Phase Micro-Channel Heat Sink," Int. J. Heat Mass Transfer, 45, pp. 2549-2565.
12. Qu, W., and Mudawar, I., 2002, "Analysis of Three-Dimensional Heat Transfer inMicro-Channel Heat Sinks," Int. J. Heat Mass Transfer, 45, pp. 3973-3985. (Pubitemid 34792334)
13. Bowers, M. B., and Mudawar, I., 1994, "High Flux Boiling in Low Flow Rate, Low Pressure Drop Mini-Channel and Micro-Channel Heat Sinks," Int. J. Heat Mass Transfer, 37, pp. 321-332.
14. Bowers, M. B., and Mudawar, I., 1994, "Two-Phase Electronic Cooling Using Mini-Channel and Micro-Channel Heat Sinks-Part 1. Design Criteria and Heat Diffusion Constraints," ASME J. Electron. Packag., 116, pp. 290-297.
15. Bowers, M. B., and Mudawar, I., 1994, "Two-Phase Electronic Cooling Using Mini-Channel and Micro-Channel Heat Sinks-Part 2. Flow Rate and Pressure Drop Constraints," ASME J. Electron. Packag., 116, pp. 298-305.
16. Qu, W., and Mudawar, I., 2004, "Transport Phenomena in Two-Phase Micro-Channel Heat Sinks," ASME J. Electron. Packag., 126, pp. 213-224. (Pubitemid 40134502)
17. Wallis, G. B., 1969, One Dimensional Two-Phase Flow, 2nd ed., McGraw-Hill, New York, NY.
18. Koskie, J. E., Mudawar, I., and Tiederman, W. G., 1989, "Parallel-Wire Probes for Measurement of Thick Liquid Films," Int. J. Multiphase Flow, pp. 521-530. (Pubitemid 20643993)
19. El-Masri, M. A., and Louis, J. F., 1978, "On the Design of High-Temperature Gas Turbine Blade Water Cooling Channels," ASME J. Eng. Power, 100, pp. 586-591. (Pubitemid 9400289)
20. Kydd, P. H., and Day, W. H., 1975, "An Ultra High Temperature Turbine for Maximum Performance and Fuels Flexibility," ASME Paper No. 75-GT-81.
21. Caruvana, A., Manning, G. B., Day, W. H., and Sheldon, R. C., 1978, "Evaluation of a Water-Cooled Gas Turbine Combined Cycle Plant," ASME Paper No. 78-GT-77.
22. Mudawar, I., and El-Masri, M. A., 1984, "Thermal Design Constraints in Open Loop Water-Cooled Turbine Blades," ASME Paper No. 84-WA/HT-68.
23. Mudawar, I., El-Masri, M. A., Wu, C. S., and Ausman-Mudawar, J. R., 1985, "Boiling Heat Transfer and Critical Heat Flux in High-Speed Rotating Liquid Films," Int. J. Heat Mass Transfer, 28, pp. 795-806. (Pubitemid 15514522)
24. Mudawar, I., and El-Masri, M. A., 1988, "Boiling Incipience in Plane Rotating Water Films," ASME J. Heat Transfer, 110, pp. 532-535. (Pubitemid 18622531)
25. The European Joint Undertaking for ITER and Development of Fusion Energy, 2008, "Fusion for Energy," Annual Report, Barcelona, Spain.
26. Boyd, R. D., 1985, "Subcooled Flow Boiling Critical Heat Flux (CHF) and Its Application to Fusion Energy Components-Part I. A Review of Fundamentals of CHF and related Data Base," Fusion Technol., 7, pp. 7-31.
27. Mudawar, I., and Bowers, M. B., 1999, "Ultra-High Critical Heat Flux (CHF) for Subcooled Water Flow Boiling-I. CHF Data and Parametric Effects for Small Diameter Tubes," Int. J. Heat Mass Transfer, 42, pp. 1405-1428.
28. Ornatskii, A. P., and Vinyarskii, L. S., 1965, "Heat Transfer Crisis in a Forced Flow of Underheated Water in Small-Bore Tubes," Teplofizika Vys. Temp., 3, pp. 444-451 (Also in High Temperature, 3, pp. 400-406).
29. Hall, D. D., and Mudawar, I., 1999, "Ultra-High Critical Heat Flux (CHF) for Subcooled Water Flow Boiling-II. High-CHF Database and Design Parameters," Int. J. Heat Mass Transfer, 42, pp. 1429-1456.
30. Wang, Q., Wu, F., Zeng, M., and Luo, L., 2006, "Numerical Simulation and Optimization on Heat Transfer and Fluid Flow of Liquid Rocket Engine Thrust Chamber," Int. J. Comput.-Aided Eng. Softw., 23, pp. 907-921. (Pubitemid 44704557)
31. Incropera, F. P., and Dewitt, D. P., 2002, Fundamentals of Heat and Mass Transfer, 5th ed., Wiley, New York, NY.
32. Wadel, M. F., 1998, "Comparison of High Aspect Ratio Cooling Channel Designs for a Rocket Combustion Chamber With Development of an Optimized Design," Cleveland, OH, NASA Technical Report No. TM-1998-206313.
33. Gambill, W. R., and Green, N. D., 1958, "Boiling Burnout With Water in Vortex Flow," Chem. Eng. Prog., 54, pp. 68-76.
34. Gu, C. B., Chow, L. C., and Beam, J. E., 1989, "Flow Boiling in a Curved Channel," Heat Transfer in High Energy/High Heat Flux Applications, R. J. Goldstein, L. C. Chow, and E. E. Anderson, eds., ASME, HTD, Vol. 119, pp. 25-32. (Pubitemid 20663671)
35. Zuber, N., Tribus, M., and Westwater, J. M., 1961, "The Hydrodynamic Crisis in Pool Boiling of Saturated and Subcooled Liquids," Proceedings of the 1961-62 International Heat Transfer Conference, Boulder, CO, pp. 230-236.
36. Sturgis, J. C., and Mudawar, I., 1999, "Critical Heat Flux in a Long, Curved Channel Subjected to Concave Heating," Int. J. Heat Mass Transfer, 42, pp. 3831-3848. (Pubitemid 29435199)
37. Sturgis, J. C., and Mudawar, I., 1999, "Assessment of CHF Enhancement Mechanisms in a Curved, Rectangular Channel Subjected to Concave Heating," ASME J. Heat Transfer, 121, pp. 394-404. (Pubitemid 29419240)
38. Mudawar, I., Howard, A. H., and Gersey, C. O., 1997, "An Analytical Model for Near-Saturated Pool Boiling CHF on Vertical Surfaces," Int. J. Heat Mass Transfer, 40, pp. 2327-2339. (Pubitemid 127405359)
39. Howard, A. H., and Mudawar, I., 1999, "Orientation Effects on Pool Boiling CHF and Modeling of CHF for Near-Vertical Surfaces," Int. J. Heat Mass Transfer, 42, pp. 1665-1688. (Pubitemid 29216365)
40. Galloway, J. E., and Mudawar, I., 1993, "CHF Mechanism in Flow Boiling From a Short Heated Wall-Part 1. Examination of Near-Wall Conditions With the Aid of Photomicrography and High-Speed Video Imaging," Int. J. Heat Mass Transfer, 36, pp. 2511-2526.
41. Galloway, J. E., and Mudawar, I., 1993, "CHF Mechanism in Flow Boiling From a Short Heated Wall-Part 2. Theoretical CHF Model," Int. J. Heat Mass Transfer, 36, pp. 2527-2540.
42. Sturgis, J. C., and Mudawar, I., 1999, "Critical Heat Flux in a Long, Rectangular Channel Subjected to One-Sided Heating-I. Flow Visualization," Int. J. Heat Mass Transfer, 42, pp. 1835-1847. (Pubitemid 29265140)
43. Sturgis, J. C., and Mudawar, I., 1999, "Critical Heat Flux in a Long, Rectangular Channel Subjected to One-Sided Heating-II. Analysis of CHF Data," Int. J. Heat Mass Transfer, 42, pp. 1849-1862. (Pubitemid 29265141)
44. Barwick, M., Midkoff, M., and Seals, D., 1991, "Liquid Flow-Through Cooling for Avionics Applications," Proceedings of the IEEE 1991 National Aerospace and Electronics Conference (NAECON), Dayton, OH, Vol. 1, pp. 227-230.
45. Mudawar, I., Jimenez, P. E., and Morgan, R. E., 1994, "Immersion-Cooled Standard Electronic Clamshell Module: A Building Block for Future High-Flux Avionics Systems," ASME J. Electron. Packag., 116, pp. 116-125.
46. Jimenez, P. E., and Mudawar, I., 1994, "A Multi-Kilowatt Immersion-Cooled Standard Electronic Clamshell Module for Future Aircraft Avionics," ASME J. Electron. Packag., 116, pp. 220-229.
47. Electrical and Electronics Technical Team, 2006, "Electrical and Electronics Technical Team Roadmap," U.S. Department of Energy, Washington, D.C.
48. Mudawar, I., Bharathan, D., Kelly, K., and Narumanchi, S., 2009, "Two-Phase Spray Cooling of Hybrid Vehicle Electronics," IEEE Trans. Compon. Packag. Manuf. Technol., 32, pp. 501-512.
49. Mori, D., and Hirose, K., 2009, "Recent Challenges of Hydrogen Storage Technologies for Fuel Cell Vehicles," Int. J. Hydrogen Energy, 34, pp. 4569-4575.
50. Visaria, M., Mudawar, I., Pourpoint, T., and Kumar, S., 2010, "Study of Heat Transfer and Kinetics Parameters Influencing the Design of Heat Exchangers for Hydrogen Storage in High-Pressure Metal Hydrides," Int. J. Heat Mass Transfer, 53, pp. 2229-2239.
51. Visaria, M., Mudawar, I., and Pourpoint, T., 2001, "Enhanced Heat Exchanger Design for Hydrogen Storage Using High-Pressure Metal Hydride-Part 1. Design Methodology and Computational Results," Int. J. Heat Mass Transfer, 54, pp. 413-423.
52. Visaria, M., Mudawar, I., and Pourpoint, T., 2001, "Enhanced Heat Exchanger Design for Hydrogen Storage Using High-Pressure Metal Hydride-Part 2. Experimental Methods," Int. J. Heat Mass Transfer, 54, pp. 424-432.
53. Mudawar, I., 2009, "Micro-Channel Heat Exchangers for Metal Hydride Hydrogen Storage Systems," U.S. Provisional Patent Application No. 61/184,595.
54. Kirschman, R. K., 1985, "Cold Electronics: An Overview," Cryogenics, 25, pp. 115-122.
55. Phelan, P. E., Chiriac, V. A., and Lee, T.-Y. T., 2002, "Current and Future Miniature Refrigeration Cooling Technologies for High Power Microelectronics," IEEE Trans. Compon. Packag. Manuf. Technol., 25, pp. 356-365.
56. Peeples, J. W., Little, W., Schmidt, R., and Nisenoff, M., 2000, "Low Temperature Electronics Workshop," Proceedings of the 16th Semiconductor Thermal Measurement and Management Symposium, San Jose, CA, pp. 108-109.
57. Schmidt, R. R., and Notohardjono, B. D., 2002, "High-End Server Low-Temperature Cooling," IBM J. Res. Dev., 46, pp. 739-751.
58. Chiriac, V., and Chiriac, F., 2006, "The Optimization of a Refrigerant Vapor Compression System for Power Microelectronics," Proceedings of the ITherm 2006, San Diego, CA, pp. 759-764. (Pubitemid 44929560)
59. Wadell, R., Joshi, Y. K., and Fedorov, A. G., 2007, "Experimental Investigation of Compact Evaporators for Ultralow Temperature Refrigeration of Microprocessors," ASME J. Electron. Packag., 129, pp. 291-299. (Pubitemid 351184030)
60. Tran, T. N., Chyu, M.-C., Wambsganss, M. W., and France, D. M., 2000, "Two-Phase Pressure Drop of Refrigerants During Flow Boiling in Small Channels: An Experimental Investigation and Correlation Development," Int. J. Multiphase Flow, 26, pp. 1739-1754.
61. Lee, H. J., and Lee, S. Y., 2001, "Pressure Drop Correlations for Two-Phase Flow Within Horizontal Rectangular Channels With Small Heights," Int. J. Multiphase Flow, 27, pp. 783-796.
62. Qu, W., and Mudawar, I., 2003, "Flow Boiling Heat Transfer in Two-Phase Micro-Channel Heat Sinks-I. Experimental Investigation and Assessment of Correlation Methods," Int. J. Heat Mass Transfer, 46, pp. 2755-2771. (Pubitemid 36658968)
63. Qu, W., and Mudawar, I., 2003, "Flow Boiling Heat Transfer in Two-Phase Micro-Channel Heat Sinks-II. Annular Two-Phase Flow Model," Int. J. Heat Mass Transfer, 46, pp. 2773-2784. (Pubitemid 36669406)
64. Lee, J., and Mudawar, I., 2005, "Two-Phase Flow in High-Heat-Flux Micro-Channel Heat Sink for Refrigeration Cooling Applications: Part I-Pressure Drop Characteristics," Int. J. Heat Mass Transfer, 48, pp. 928-940. (Pubitemid 40231287)
65. Lee, J., and Mudawar, I., 2005, "Two-Phase Flow in High-Heat-Flux Micro-Channel Heat Sink for Refrigeration Cooling Applications: Part II-Heat Transfer Characteristics," Int. J. Heat Mass Transfer, 48, pp. 928-940. (Pubitemid 40231287)
66. Lee, J., and Mudawar, I., 2008, "Fluid Flow and Heat Transfer Characteristics of Low Temperature Two-Phase Micro-Channel Heat Sinks-Part 1: Experimental Methods and Flow Visualization Results," Int. J. Heat Mass Transfer, 51, pp. 4315-4326.
67. Lee, J., and Mudawar, I., 2008, "Fluid Flow and Heat Transfer Characteristics of Low temperature Two-Phase Micro-Channel Heat Sinks-Part 2: Subcooled Boiling Pressure Drop and Heat Transfer," Int. J. Heat Mass Transfer, 51, pp. 4327-4341.
68. Lee, J., and Mudawar, I., 2009, "Critical Heat Flux for Subcooled Flow Boiling inMicro-Channel Heat Sinks," Int. J. Heat Mass Transfer, 52, pp. 3341-3352.
69. Lee, J., and Mudawar, I., 2009, "Experimental Investigation and Theoretical Model for Subcooled Flow Boiling Pressure Drop in Micro-Channel Heat Sinks," ASME J. Electron. Packag., 131, 031008.
70. Lee, J., and Mudawar, I., 2009, "Low-Temperature Two-Phase Micro-Channel Cooling for High-Heat-Flux Thermal Management of Defense Electronics," IEEE Trans. Compon. Packag. Manuf. Technol., 32, pp. 453-465.
71. Chiaramonte, F. P., and Joshi, J. A., 2004, "Workshop on Critical Issues in Microgravity Fluids, Transport, and Reaction Processes in Advanced Human Support Technology-Final Report," Report No. NASA TM 2004-212940.
72. Zhang, H., I. Mudawar, I., and Hasan, M. M., 2005, "Flow Boiling CHF in Microgravity," Int. J. Heat Mass Transfer, 48, pp. 3107-3118. (Pubitemid 40653272)
73. Saito, M., Yamaoka, N., Miyazaki, K., Kinoshita, M., and Abe, Y., 1994, "Boiling Two-Phase Flow Under Microgravity," Nucl. Eng. Des., 146, pp. 451-461.
74. Cochran, T. H., 1970, "Forced-Convection Boiling Near Inception in Zero-Gravity," NASA Technical Note D-5612.
75. Ma, Y., and Chung, J. N., 2001, "An Experimental Study of Critical Heat Flux (CHF) in Microgravity Forced-Convection Boiling," Int. J. Multiphase Flow, 27, pp. 1753-1767. (Pubitemid 32863406)
76. Zhang, H., Mudawar, I., and Hasan, M. M., 2007, "Assessment of Dimensionless CHF Correlations for Subcooled Flow Boiling in Microgravity and Earth Gravity," Int. J. Heat Mass Transfer, 50, pp. 4568-4580. (Pubitemid 47483750)
77. Zhang, H., Mudawar, I., and Hasan, M. M., 2004, "A Method for Assessing the Importance of Body Force on Flow Boiling CHF," ASME J. Heat Transfer, 126, pp. 161-168. (Pubitemid 38592010)
78. Zhang, H., Mudawar, I., and Hasan, M. M., 2009, "Application of Flow Boiling for Thermal Management of Electronics in Microgravity and Reduced Gravity Systems," IEEE Trans. Compon. Packag. Manuf. Technol., 32, pp. 466-477.
79. Ku, J., 1993, "Overview of Capillary Pumped Loop Technology," Proceedings of the 29th National Heat Transfer Conference, ASME, Atlanta, GA, HTDVol. 236, pp. 1-17. (Pubitemid 23709787)
80. LaClair, T. J., and Mudawar, I., 2000, "Thermal Transients in a Capillary Evaporator Prior to the Initiation of Boiling," Int. J. Heat Mass Transfer, 43, pp. 3937-3952.
81. Cullimore, B. A., 1991, "Start Up Transients in Capillary Pumped Loops," AIAA Paper No. 91-1374, Reston, VA.
82. LaClair, T. J., and Mudawar, I., 2009, "Theoretical Model for Fast Bubble Growth in Small Channels With Reference to Startup of Capillary Pumped Loops Used in Spacecraft Thermal Management Systems," Int. J. Heat Mass Transfer, 52, pp. 716-723.
83. Mala, G. M., and Li, D., 1999, "Flow Characteristics of Water in Microtubes," Int. J. Heat Fluid Flow, 20, pp. 142-148.
84. Papautsky, I., Brazzle, J., Ameel, T., and Frazier, A. B., 1999, "Laminar Fluid Behavior in Microchannels Using Micropolar Fluid Theory," Sens. Actuators, A, 73, pp. 101-108.
85. Choi, S. B., Barron, R. R., and Warrington, R. O., 1991, "Fluid Flow and Heat Transfer in Micro Tubes," ASME DSC-40, pp. 89-93.
86. Peng, X. F., Peterson, G. P., and Wang, B. X., 1994, "Frictional Flow Characteristics of Water Flowing Through Rectangular Microchannels," Exp. Heat Transfer, 7, pp. 249-264.
87. Flockhart, S. M., and Dhariwal, R. S., 1998, "Experimental and Numerical Investigation Into the Flow Characteristics of Channels Etched in Silicon," ASME J. Fluids Eng., 120, pp. 291-295. (Pubitemid 128444572)
88. Judy, J., Maynes, D., and Webb, B. W., 2002, "Characterization of Frictional Pressure Drop for Liquid Flows Through Microchannels," Int. J. Heat Mass Transfer, 45, pp. 3477-3489. (Pubitemid 34689929)
89. Wu, H. Y., and Cheng, D., 2003, "Friction Factors in Smooth Trapezoidal Silicon Microchannels With Different Aspect Ratios," Int. J. Heat Mass Transfer, 46, pp. 2519-2525. (Pubitemid 36610806)
90. Qu, W., Mudawar, I., Lee, S.-Y., and Wereley, S. T., 2006, "Experimental and Computational Investigation of Flow Development and Pressure Drop in a Rectangular Micro-Channel," ASME J. Electron. Packag., 128, pp. 1-9.
91. Gan, Y., Xu, J., and Wang, S., 2008, "Are the Available Boiling Heat Transfer Coefficients Suitable for Silicon Microchannel Heat Sinkŝ," Microfluids Nanofluids, 4, pp. 575-587. (Pubitemid 351722206)
92. Hetsroni, G., Mosyak, A., Pogrebnyak, E., and Segal, Z., 2006, "Periodic Boiling in Parallel Micro-Channels at Low Vapor Quality," Int. J. Multiphase Flow, 32, pp. 1141-1159. (Pubitemid 44442584)
93. Wang, G., Cheng, P., and Bergles, A. E., 2008, "Effects of Inlet/Outlet Configurations on Flow Boiling Instability in Parallel Microchannels," Int. J. Heat Mass Transfer, 51, 2267-2281. (Pubitemid 351483888)
94. Wu, H. Y., and Cheng, P., 2004, "Boiling Instability in Parallel Silicon Microchannels at Different Heat Flux," Int. J. Heat Mass Transfer, 47, pp. 3631-3641. (Pubitemid 38790915)
95. Jiang, L., Wong, M., and Zohar, Y., 1999, "Phase Change in Microchannel Heat Sinks With Integrated Temperature Sensors," J. Microelectromech. Syst., 8, pp. 358-365. (Pubitemid 30552562)
96. Cortés, C., Diez, L. I., and Campo, A., 2008, "Efficiency of Composite Fins of Variable Thickness," Int. J. Heat Mass Transfer, 51, pp. 2153-2166.
97. Kim, S. M., and Mudawar, I., 2010, "Analytical Heat Diffusion Models for Different Micro-Channel Heat Sink Cross-Sectional Geometries," Int. J. Heat Mass Transfer, 53, pp. 4001-4016.
98. Kim, S. M., and Mudawar, I., 2010, "Analytical Heat Diffusion Models for Heat Sinks With Circular Micro-Channels," Int. J. Heat Mass Transfer, 53, pp. 4552-4566.
99. Thome, J. R., 2004, "Boiling in Microchannels: A Review of Experiment and Theory," Heat Fluid Flow, 25, pp. 128-139. (Pubitemid 38439217)
100. Liao, S.-J., 2002, "An Analytic Approximation of the Drag Coefficient for the Viscous Flow Past a Sphere," Int. J. Non-Linear Mech., 37, pp. 1-18. (Pubitemid 32707208)
101. Sato, T., and Matsumura, H., 1963, "On the Conditions of Incipient Subcooled Boiling and Forced-Convection," Bull. JSME, 7, pp. 392-398.
102. Davis, E. J., and Anderson, G. H., 1966, "The Incipience of Nucleate Boiling in Forced Convection Flow," AIChE J., 12, pp. 774-780.
103. Qu, W., and Mudawar, I., 2002, "Prediction and Measurement of Incipient Boiling Heat Flux in Micro-Channel Heat Sinks," Int. J. Heat Mass Transfer, 45, pp. 3933-3945. (Pubitemid 34792331)
104. Qu, W., and Mudawar, I., 2003, "Thermal Design Methodology for High-Heat-Flux Single-Phase and Two-Phase Micro-Channel Heat Sinks," IEEE Trans. Compon. Packag. Manuf. Technol., 26, pp. 598-609.
105. Al-Hayes, R. A. M., and Winterton, R. H. S., 1981, "Bubble Diameter in Detachment in Flowing Liquids," Int. J. Heat Mass Transfer, 24, pp. 223-230. (Pubitemid 11466460)
106. Winterton, R. H. S., 1984, "Flow Boiling: Prediction of Bubble Departure," Int. J. Heat Mass Transfer, 27, pp. 1422-1424.
107. Willingham, T. C., and Mudawar, I., 1992, "Channel Height Effects on Forced-Convection Boiling and Critical Heat Flux From a Linear Array of Discrete Heat Sources," Int. J. Heat Mass Transfer, 35, pp. 1865-1880. (Pubitemid 23600874)
108. Willingham, T. C., and Mudawar, I., 1992, "Forced-Convection Boiling and Critical Heat Flux From a Linear Array of Discrete Heat Sources," Int. J. Heat Mass Transfer, 35, pp. 2879-2890. (Pubitemid 23581440)
109. Hosler, E. R., 1968, "Flow Patterns in High Pressure Two-Phase (Stream-Water) Flow With Heat Addition," AIChE Symp. Ser., 64, pp. 54-66.
110. Wambsganss, M. W., Jendrzejczyk, J. A., and France, D. M., 1991, "Two-Phase Flow Patterns and Transition in a Small, Horizontal, Rectangular Channel," Int. J. Multiphase Flow, 17, pp. 327-342. (Pubitemid 21700811)
111. Ali, M. I., and Kawaji, M., 1991, "The Effect of Flow Channel Orientation on Two-Phase Flow in a Narrow Passage Between Flat Plates," Proceedings of the 1991 ASME/JSME Thermal Engineering Joint Conference, J. R. Lloyd and Y. Kurosaki, eds., ASME, New York, NY, Vol. 2, pp. 183-190.
112. Mishima, K., Hibiki, T., and Nishihara, H., 1993, "Some Characteristics of Gas-Liquid Flow in Narrow Rectangular Ducts," Int. J. Multiphase Flow, 19, pp. 115-124.
113. Fujita, H., Ohara, T., Hirota, M., and Furuta, H., 1995, "Gas-Liquid Flows in Flat ChannelsWith Small Channel Clearance," Advances in Multiphase Flow, A. Serizawa, T. Fukano, and J. Bataille, eds., Elsevier, New York, NY, pp. 441-451.
114. Xu, J. L., Cheng, P., and Zhao, T. S., 1999, "Gas-Liquid Two-Phase Flow Regimes in Rectangular Channels With Mini/Micro Gaps," Int. J. Multiphase Flow, 25, pp. 411-432. (Pubitemid 29358301)
115. Qu, W., Yoon, S.-M., and Mudawar, I., 2004, "Two-Phase Flow and Heat Transfer in Rectangular Micro-Channels," ASME J. Electron. Packag., 126, pp. 288-300. (Pubitemid 40122694)
116. Mandhane, J. M., Gregory, G. A., and Aziz, K., 1974, "A Flow Pattern Map for Gas-Liquid Flow in Horizontal Pips," Int. J. Multiphase Flow, 1, pp. 537-553.
117. Taitel, Y., and Dukler, A. E., 1976, "A Model for Predicting Flow Regime Transitions in Horizontal and Near Horizontal Gas-Liquid Flow," AIChE J., 22, pp. 47-55.
118. Bergles, A. E., 1977, "Review of Instability in Two-Phase Systems," Two-Phase Flows and Heat Transfer, S. Kakac, and F. Mayinger, eds., Hemisphere, Washington, Vol. 1, pp. 383-422.
119. Yadigaroglu, G., 1981, "Two-Phase Flow Instabilities and Propagation Phenomena," Thermohydraulics of Two-Phase Systems for Industrial Design and Nuclear Engineering, J. M. Delhaye, M. Giot, and M. L. Riethmuller, eds., Hemisphere, Washington, pp. 353-403.
120. Qu, W., and Mudawar, I., 2003, "Measurement and Prediction of Pressure Drop in Two-Phase Micro-Channel Heat Sinks," Int. J. Heat Mass Transfer, 46, pp. 2737-2753. (Pubitemid 36658967)
121. Shah, R. K., and London, A. L., 1978, Laminar Flow Forced Convection in Ducts: A Source Book for Compact Heat Exchanger Analytical Data, Supplement 1, Academic, New York, NY.
122. Lee, J., 2008, "Investigation of Subcooled Boiling in Micro-Channel Heat Sink for Indirect Refrigeration Cooling Applications," Ph.D. thesis, Purdue University, West Lafayette, IN.
123. McAdams, W. H., Woods, W. K., and Heroman, L. C., 1942, "Vaporization Inside Horizontal Tubes, II. Benzene-Oil Mixture," Trans. ASME, 64, pp. 200.
124. Davidson, W. F., Hardie, P. H., Humphreys, C. G. R., Markson, A. A., Mumford, A. R., and Ravese, T., 1943, "Studies of Heat Transmission Through Boiler Tubing at Pressures From 500 to 3300 Pounds," Trans. ASME, 65, pp. 553-591.
125. Cicchitti, A., Lombardi, C., Silvestri, M., Soldaini, G., and Zavalluilli, R., 1960, "Two-Phase Cooling Experiments-Pressure Drop, Heat Transfer and Burnout Measurements," Energ. Nucl., 7, pp. 407-425.
126. Owens, W. L., 1961, "Two-Phase Pressure Gradient," Int. Dev. Heat Transfer, Part II, ASME, pp. 363-368.
127. Dukler, A. E., Wicks, M., and Cleaveland, R. G., 1964, "Pressure Drop and Hold Up in Two-Phase Flow," AIChE J., 10, pp. 38-51.
128. Zivi, S. M., 1964, "Estimation of Steady-State Steam Void-Fraction by Means of the Principle of Minimum Entropy Production," ASME J. Heat Transfer, 86, pp. 247-252.
129. Lockhart, R. W., and Martinelli, R. C., 1949, "Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes," Chem. Eng. Prog., 45, pp. 39-48.
130. Mishima, K., and Hibiki, T., 1996, "Some Characteristics of Air-Water Two-Phase Flow in Small Diameter Vertical Tubes," Int. J. Multiphase Flow, 22, pp. 703-712.
131. Blevins, R. D., 1984, Applied Fluid Dynamics Handbook, Van Nostrand Reinhold, New York, NY.
132. Collier, J. G., and Thome, J. R., 1994, Convective Boiling and Condensation, 3rd ed., Oxford University Press, New York, NY.
133. Copeland, D., 1995, "Manifold Microchannel Heat Sinks: Analysis and Optimization," Therm. Sci. Eng., 3, pp. 7-12.
134. Al-Arabi, M., 1982, "Turbulent Heat Transfer in the Entrance Region of a Tube," Heat Transfer Eng., 3, pp. 76-83. (Pubitemid 13479671)
135. Chen, J. C., 1966, "Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow," I&EC Process Des. Dev., 5, pp. 322-329.
136. Shah, M. M., 1982, "Chart Correlation for Saturated Boiling Heat Transfer: Equation and Further Study," ASHRAE Trans., 88, pp. 185-196. (Pubitemid 14500540)
137. Gungor, K. E., and Winterton, R. H. S., 1986, "A General Correlation for Flow Boiling in Tubes and Annuli," Int. J. Heat Mass Transfer, 29, pp. 351-358. (Pubitemid 16536703)
138. Kandlikar, S. G., 1990, "A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes," ASME J. Heat Transfer, 112, pp. 219-228. (Pubitemid 20649435)
139. Liu, Z., and Winterton, R. H. S., 1991, "A General Correlation for Saturated and Subcooled Flow Boiling in Tube and Annuli," Int. J. Heat Mass Transfer, 34, pp. 2759-2766.
140. Steiner, D., and Taborek, J., 1992, "Flow Boiling Heat Transfer in Vertical Tubes Correlated by an Asymptotic Model," Heat Transfer Eng., 13, pp. 43-69.
141. Lazarek, G. M., and Black, S. H., 1982, "Evaporative Heat Transfer, Pressure Drop and Critical Heat Flux in a Small Vertical Tube With R-113," Int. J. Heat Mass Transfer, 25, pp. 945-959.
142. Tran, T. N., Wambsganss, M. W., and France, D. M., 1996, "Small Circularand Rectangular-Channel Boiling With Two Refrigerants," Int. J. Multiphase Flow, 22, pp. 485-498. (Pubitemid 126380265)
143. Lee, H. J., and Lee, S. Y., 2001, "Heat Transfer Correlation for Boiling Flows in Small Rectangular Horizontal Channels With Low Aspect Ratios," Int. J. Multiphase Flow, 27, pp. 2062.
144. Yu, W., France, D. M., Wambsganss, M. W., and Hull, J. R., 2002, "Two-Phase Pressure Drop, Boiling Heat Transfer, and Critical Heat Flux to Water in a Small-Diameter Horizontal Tube," Int. J. Multiphase Flow, 28, pp. 927-941. (Pubitemid 34703844)
145. Warrier, G. R., Dhir, V. K., and Momoda, L. A., 2002, "Heat Transfer and Pressure Drop in Narrow Rectangular Channels," Exp. Therm. Fluid Sci., 26, pp. 53-64. (Pubitemid 34573099)
146. Katto, Y., and Ohno, H., 1984, "An Improved Version of the Generalized Correlation of Critical Heat Flux for the Forced Convective Boiling in Uniformly Heated Vertical Tubes," Int. J. Heat Mass Transfer, 27, pp. 1641-1648. (Pubitemid 14647546)
147. Hall, D. D., and Mudawar, I., 2000, "Critical Heat Flux (CHF) for Water Flow in Tubes-I. Compilation and Assessment of World CHF Data," Int. J. Heat Mass Transfer, 43, pp. 2573-2604. (Pubitemid 30255105)
148. Hall, D. D., and Mudawar, I., 2000, "Critical Heat Flux (CHF) for Water Flow in Tubes-II. Subcooled CHF Correlations," Int. J. Heat Mass Transfer, 43, pp. 2605-2640. (Pubitemid 30255106)
149. Qu, W., and Mudawar, I., 2005, "A Systematic Method for Optimal Design of Two-Phase Micro-Channel Heat Sinks," ASME J. Electron. Packag., 127, pp. 381-390. (Pubitemid 43017462)
150. Lee, J., and Mudawar, I., 2006, "Implementation of Micro-Channel Evaporator for High-Heat-Flux Refrigeration Cooling Applications," ASME J. Electron. Packag., 128, pp. 30-37.
151. Choi, S. U. S., 1995, "Enhancing Thermal Conductivity of Fluids With Nanoparticles," Developments and Applications of Non-Newtonian Flows, D. A. Siginer and H. P. Wang, eds., ASME, New York, NY, FED-Vol. 231/MDVol. 66, pp. 99-105.
152. Lee, S., Choi, S. U.-S., Li, S., and Eastman, J. A., 1999, "Measuring Thermal Conductivity of Fluids Containing Oxide Nanoparticles," ASME J. Heat Transfer, 121, pp. 280-289. (Pubitemid 29419226)
153. Xue, Q.-Z., 2003, "Model for Effective Thermal Conductivity of Nanofluids," Phys. Lett. A, 307, pp. 313-317.
154. Lee, J., and Mudawar, I., 2007, "Assessment of the Effectiveness of Nanofluids for Single-Phase and Two-Phase Heat Transfer in Micro-Channels," Int. J. Heat Mass Transfer, 50, pp. 452-463. (Pubitemid 44881032)
155. Kim, P., Shi, L., Majumdar, A., and McEuen, P. L., 2001, "Thermal Transport Measurements of Individual Multiwalled Nanotubes," Phys. Rev. Lett., 87, pp. 1-4.
156. Ujereh, S., Fisher, T., and Mudawar, I., 2007, "Effects of Carbon Nanotube Arrays on Nucleate Pool Boiling," Int. J. Heat Mass Transfer, 50, pp. 4023-4038. (Pubitemid 46733951)
157. Launay, S., Fedorov, A. G., Joshi, Y., Cao, A., and Ajayan, P. M., 2006, "Hybrid Micro-Nano Structured Thermal Interfaces for Pool Boiling Heat Transfer Enhancement," Microelectron. J., 37, pp. 1158-1164. (Pubitemid 44692713)
158. Khanikar, V., Mudawar, I., and Fisher, T., 2009, "Effects of Carbon Nanotube Coating on Flow Boiling in a Micro-Channel," Int. J. Heat Mass Transfer, 52, pp. 3805-3817.
159. Anderson T. M., and Mudawar, I., 1989, "Microelectronic Cooling by Enhanced Pool Boiling of a Dielectric Fluorocarbon Liquid," ASME J. Heat Transfer, 111, pp. 752-759.
160. Mukherjee, S., and Mudawar, I., 2003, "Smart, Low-Cost, Pumpless Loop for Micro-Channel Electronic Cooling Using Flat and Enhanced Surfaces," IEEE Trans. Compon. Packag. Manuf. Technol., 26, pp. 99-109.
161. Mukherjee, S., and Mudawar, I., 2003, "Pumpless Loop for Narrow Channel and Micro-Channel Boiling From Vertical Surfaces," ASME J. Electron. Packag., 125, pp. 431-441.
162. Mudawar, I., and Wadsworth, D. C., 1991, "Critical Heat Flux From a Simulated Electronic Chip to a Confined Rectangular Impinging Jet of Dielectric Liquid," Int. J. Heat Mass Transfer, 34, pp. 1465-1480.
163. Wadsworth, D. C., and Mudawar, I., 1992, "Enhancement of Single-Phase Heat Transfer and Critical Heat Flux From an Ultra-High-Flux Simulated Microelectronic Heat Source to a Rectangular Impinging Jet of Dielectric Liquid," ASME J. Heat Transfer, 114, pp. 764-768. (Pubitemid 23567925)
164. Sung, M. K., and Mudawar, I., 2008, "Single-Phase and Two-Phase Cooling Using Hybrid Micro-Channel/Slot-Jet Module," Int. J. Heat Mass Transfer, 51, pp. 3825-3839.
165. Sung, M. K., and Mudawar, I., 2009, "Effects of Jet Pattern on Two-Phase Cooling Performance of Hybrid Micro-Channel/Micro-Circular-Jet- Impingement Thermal Management Scheme," Int. J. Heat Mass Transfer, 52, pp. 3364-3372.
166. Sung, M. K., and Mudawar, I., 2009, "CHF Determination for High-Heat-Flux Phase-Change Cooling System Incorporating Both Micro-Channel Flow and Jet-Impingement," Int. J. Heat Mass Transfer, 52, pp. 610-619.
167. Sung, M. K., and Mudawar, I., 2009, "Single-Phase and Two-Phase Hybrid Cooling Scheme for High-Heat-Flux Thermal Management of Defense Electronics," ASME J. Electron. Packag., 131, 021013.
168. Ndao, S., Peles, Y., and Jensen, M. K., 2009, "Multi-Objective Thermal Design Optimization and Comparative Analysis of Electronics Cooling Technologies," Int. J. Heat Mass Transfer, 52, pp. 4317-4326.