Two-phase flow and heat transfer in rectangular micro-channels

Journal of Electronic Packaging

Volumn 126, Issue 3, 2004, Pages 288-300

  Qu, Weilin ^a   Yoon, Seok Mann ^a   Mudawar, Issam ^a  

^a Purdue University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOILING LIQUIDS; CHANNEL FLOW; COOLING; FLOW PATTERNS; HEAT FLUX; HEAT TRANSFER; IMAGING TECHNIQUES; NITROGEN; PRESSURE DROP; TWO PHASE FLOW;

ANNULAR FLOW; BUBBLY FLOW; MICRO-CHANNELS; VIDEO IMAGING;

HEAT SINKS;

EID: 12344298493     PISSN: 10437398     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1756589     Document Type: Article

References (32)

1. Ghiaasiaan, S. M., and Abdel-Khalik, S. I., 2001, "Two-Phase Flow in Microchannels," Advances in Heat Transfer, Academic Press, New York, 34, pp. 145-254.
2. Bowers, M. B., and Mudawar, I., 1994, "High Flux Boiling in Low Flow Rate, Low Pressure Drop Mini-Channel and Micro-Channel Heat Sinks," Int. J. Heat Mass Transfer, 37, pp. 321-332.
3. Bowers, M. B., and Mudawar, I., 1994, "Two-Phase Electronic Cooling using Mini-Channel and Micro-Channel Heat Sinks: Pan 1-Design Criteria and Heat Diffusion Constraints," ASME J. Electron. Packag., 116, pp. 290-297.
4. Bowers, M. B., and Mudawar, I., 1994, "Two-Phase Electronic Cooling using Mini-Channel and Micro-Channel Heat Sinks, Part 2: Flow Rate and Pressure Drop Constraints," ASME J. Electron. Packag., 116, pp. 298-305.
5. Peng, X. F., and Wang, B. X., 1993, "Forced Convection and Flow Boiling Heat Transfer for Liquid Flowing through Microchannels," Int. J. Heat Mass Transfer, 36, pp. 3421-3427.
6. Jiang, L., Wong, M., and Zohar, Y., 2001, "Forced Convection Boiling in a Microchannel Heat Sink," J. Microelectromech. Syst., 10, pp. 80-87.
7. Zhang, L., Koo, J. M., Jiang, L., Banerjee, S. S., Ashegi, M., Goodson, K. E., Santiago, J. G., Kenny, T. W., 2000, "Measurement and Modeling of Two-Phase Flow in Microchannels with Nearly-Constant Heat Flux Boundary Conditions," Micro-Elearo-Mechanical Systems (MEMS)-2000, A. Lee et al., eds., ASME, MEMS-Vol. 2, pp. 129-135.
8. Hetsroni, G., Mosyak, A., Segal, Z., and Ziskind, G., 2002, "A Uniform Temperature Heat Sink for Cooling of Electronic Devices," Int. J. Heat Mass Transfer, 45, pp. 3275-3286.
9. Qu, W., and Mudawar, I., 2003, "Flow Boiling Heat Transfer in Two-Phase Micru-Channel Heat Sinks-I. Experimental Investigation and Assessment of Correlation Methods," Int. J. Heat Mass Transfer, 46, pp. 2755-2771.
10. Qu, W., und Mudawar, I., 2003, "Flow Boiling Heat Transfer in Two-Phase Micro-Channel Heat Sinks-II. Annular Two-Phase Flow Model," Int. J. Heat Mass Transfer, 46, 2773-2784.
11. Qu, W., and Mudawar, I., 2003, "Measurement and Prediction of Pressure Drop in Two-Phase Micro-Channel Heat Sinks," Int. J. Heat Mass Transfer, 46, pp. 2737-2753.
12. Hosler, E. R., 1968, "Flow patterns in High Pressure Two-Phase (Stream-Water) Flow with Heat Addition." AIChE Symposium Series. Vol. 64, pp. 54-66.
13. Wambsganss, M. W., Jendrzejczyk, J. A., and France, D. M., 1991, "Two-Phase Flow Patterns and Transition in a Small, Horizontal, Rectangular Channel," Int. J. Heat Mass Transfer, 17, pp. 327-342.
14. All, M. I., and Kawaji, M., 1991, "The Effect of Flow Channel Orientation on Two-Phase Flow in a Narrow Passage between Flat Plates," Proceedings of the 1991 ASME/JSME Thermal Engineering Joint Conference, J. R. Lloyd, Y. Kurosaki, eds., ASME, New York, N.Y., Vol. 2, pp. 183-190.
15. Mishima, K., Hibiki, T., and Nishihara, H., 1993, "Some Characteristics of Gas-Liquid Flow in Narrow Rectangular Ducts." Int. J. Multiphase Flow, 19, pp. 115-124.
16. Wilmarth, T., and Ishii, M., 1994, "Two-Phase Flow Regimes in Narrow Rectangular Vertical and Horizontal Channels," Int. J. Heat Mass Transfer, 37. pp. 1749-1758.
17. Fujita, H., Ohara, T., Hirota, M., and Furuta, H., 1995, "Gas-Liquid Flows in Flat Channels with Small Channel Clearance," Advances in Multiphase Flow, A. Serizawa, T. Fukano, and J. Bataille, eds., Elsevier Science, New York, pp. 441-451.
18. Xu, J. L., Cheng, P., and Zhao, T. S., 1999, "Gas-Liquid Two-Phase Flow Regimes in Rectangular Channels with Mini/Micro Gaps," Int. J. Multiphase Flow, 25, pp. 411-432.
19. Mandhane, J. M., Gregory, G. A., and Aziz, K., 1974, "A Flow Pattern Map for Gas-Liquid Flow in Horizontal Pips," Int. J. Multiphase Flow, 1, pp. 537-553.
20. Taitel, Y., and Dukler, A. E., 1976, "A Model for Predicting Flow Regime Transitions in Horizontal and Near Horizontal Gas-Liquid Flow," AIChE J., 22, pp. 47-55.
21. Weisman, J., Duncan, D., Gibson, J., and Crawtbrd, T., 1979, "Effects of Fluid Properties and Pipe Diameter on Two-Phase Flow Patterns in Horizontal Line," Int. J. Multiphase Flow, 5, pp. 437-462.
22. Cornwall, K., and Kew, P. A., 1993, "Boiling in Small Parallel Channels," Energy Efficiency in Process Technology, P. A. Pilavachi, ed, Elsevier Science, New York, pp. 624-640.
23. Suo, M., and Griffith, P., 1964, "Two-Phase Flow in Capillary Tubes," ASME J. Basic Eng., 86, pp. 576-582.
24. Collier, J. G., and Thome, J. R., 1994, Convective Boiling and Condensation, 3rd edition, Oxford University Press, Oxford.
25. Lockhart, R. W., and Martinelli, R. C., 1949, "Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes," Chem. Eng. Prog., 45, pp. 39-48.
26. Martinelli, R. C., and Nelson, D. B., 1948, "Prediction of Pressure Drop during Forced-Circulation Boiling of Water," Trans. ASME, 70, pp. 695-702.
27. Chen, J. C., 1966. "Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow," I&EC Process Design and Development, 5, pp. 322-329.
28. Edelstein, S., Perez, A. J., and Chen, J. C., 1984, "Analytic Representation of Convective Boiling Functions," AIChE J., 30, pp. 840-841.
29. Shah, M. M., 1976, "A New Correlation for Heat Transfer during Boiling Flow Through Pipes," ASHRAE Trans., 82, pp. 66-86.
30. Shah, M. M., 1982, "Chart Correlation for Saturated Boiling Heat Transfer: Equations and Further Study," ASHRAE Trans., 88, pp. 185-196.
31. Kandlikar, S. G., 1990, "A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes," ASME J. Heat Transfer, 112, pp. 219-228.
32. Steiner, D., and Taborek, J., 1992, "Flow Boiling Heat Transfer in Vertical Tubes Correlated by an Asymptotic Model," Heat Transfer Engineering, 13, pp. 43-69.