Novel ceramic-polymer composites synthesized by compaction of polymer-encapsulated TiO2-nanoparticles

Composites Science and Technology

Volumn 72, Issue 1, 2011, Pages 65-71

  Brandt, Kristina ^a   Salikov, Vitalij ^a   Özcoban, Hüseyin ^a   Staron, Peter ^b   Schreyer, Andreas ^b   Prado, Luis A S A ^a   Schulte, Karl ^a   Heinrich, Stefan ^a   Schneider, Gerold A ^a  

^a HAMBURG UNIVERSITY OF TECHNOLOGY   (Germany)

^b INSTITUTE OF MATERIALS RESEARCH   (Germany)

Author keywords

A. Hybrid composites; A. Particle reinforced composites; A. Structural composites; B. Mechanical properties; Polymer encapsulation

Indexed keywords

A. HYBRID-COMPOSITES; AQUEOUS SUSPENSIONS; CERAMIC PARTICLE; CERAMIC-POLYMER COMPOSITES; COATED PARTICLES; HIGH PRESSURE; LOW PROCESSING TEMPERATURE; MICROSTRUCTURAL INVESTIGATION; NOVEL PROCESSING ROUTES; POLYMER-ENCAPSULATION; STRUCTURAL COMPOSITES; THERMOGRAVIMETRIC MEASUREMENT; THERMOPLASTIC POLYMER; THIN LAYERS; TIO; TITANIUM DIOXIDE PARTICLES; VICKERS MICROHARDNESS; VOLUME CONTENT;

ACRYLIC MONOMERS; BENDING STRENGTH; CERAMIC MATERIALS; COMPACTION; COMPOSITE MATERIALS; ELASTIC MODULI; EMULSIFICATION; EMULSION POLYMERIZATION; ESTERS; GLASS TRANSITION; MICROHARDNESS; OXIDES; POLYMERS; SCANNING ELECTRON MICROSCOPY; SUSPENSIONS (FLUIDS); SYNTHESIS (CHEMICAL); TITANIUM; TITANIUM DIOXIDE;

PLASTIC COATINGS;

EID: 81455153967     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2011.10.001     Document Type: Article

References (39)

1. Mayer G., Sarikaya M. Rigid biological composite materials: structural examples for biomimetic design. Exp Mech 2002, 42:395-403.
2. Chen P.-Y., Lin A.Y.M., Lin Y.-S., Seki Y., Stokes A.G., Peyras J., et al. Structure and mechanical properties of selected biological materials. J Mech Behav Biomed Mater 2008, 1:208-226.
3. Evans A.G., Suo Z., Wang R.Z., Aksay I.A., He M.Y., Hutchinson J.W. Model for the robust mechanical behaviour of nacre. J Mater Res 2001, 16:2475-2484.
4. Burghard Z., Zini L., Srot V., Bellina P., van Aken P.A., Bill J. Toughening through nature-adapted nanoscale design. Nano Lett 2009, 9:4103-4108.
5. Bonderer L.J., Studart A.R., Woltersdorf J., Pippel E., Gaukler L.J. Strong and ductile platelet-reinforced polymer films inspired by nature: microstructure and mechanical properties. J Mat Res 2009, 24:2741-2754.
6. Tang Z., Kotov N.A., Magonov S., Ozturk B. Nanostructured artificial nacre. Nat Mater 2003, 2:413-418.
7. Podsiadlo P., Kaushik A.K., Arruda E.M., Waas A.M., Shim B.S., Xu J., et al. Ultrastrong and stiff layered polymer nanocomposites. Science 2007, 318:80-83.
8. Munch E., Launey M.E., Alsem D.H., Saiz E., Tomsia A.P., Ritchie R.O. Tough, bio-inspired hybrid materials. Science 2008, 322:1516-1520.
9. Bonderer L.J., Feldman K., Gauckler L.J. Platelet-reinforced polymer matrix composites by combined gel-casting and hot-pressing. Part II: thermoplastic polyurethane matrix composites. Comp Sci Tech 2010, 70:1966-1972.
10. Oner Ekiz O., Dericioglu A.F., Kakisawa H. An efficient hybrid conventional method to fabricate nacre-like bulk nano-laminar composites. Mater Sci Eng C 2009, 29:2050-2054.
11. Recent advances in elastomeric nanocomposites, a dvanced structured materials 2011, Springer, Berlin Heidelberg. V. Mittal, J.K. Kim, K. Pal (Eds.).
12. Dingshen T., Nianxi T., Qing X., Yajun S. Study on surface modification of titanium dioxide using polymethyl methacrylate. J Shanghai Univ (English Ed.) 1998, 2:67-71.
13. Yang M., Dan Y. Preparation of poly(methyl methacrylate)/titanium oxide composite particles via in-situ emulsion polymerization. J Appl Polym Sci 2006, 101:4056-4063.
14. 2 by emulsion polymerization with methyl metacrylate (MMA). Pol Bull 2005, 55:477-484.
15. Caris C.H.M., van Elven L.P.M., van Herk A.M., German A.L. Polymerization of MMA at the surface of inorganic submicron particles. Brit Poly J 1989, 21:133-140.
16. 2 nanoparticles with suspension-dispersion-polymerization in an aqueous system and its effect on mechanical properties of PVC composites. Polym Test 2008, 27:540-547.
17. Staron P., Bellmann D. Analysis of neutron double-crystal diffractometer scattering curves including multiple scattering. J Appl Cryst 2002, 35:75-81.
18. Jelitto H., Felten F., Swain M.V., Balke H., Schneider G.A. Measurement of the total energy release rate for cracks in PZT under combined mechanical and electrical loading. J Appl Mech 2007, 74:1197-1211.
19. 2 particles in aqueous surfactant solutions. Colloid Polym Sci 1991, 269:43-48.
20. Hummel DO, Scholl F, editors. Additives and processing aids: spectra and methods of identification. 2nd ed. Weinheim: Verlag Chemie GmbH; 1981.
21. Craver CD, editor. Infrared spectra of plasticizers and other additives. 2nd ed. Kirkwood: The Coblenz Society, Inc.; 1982.
22. Hummel DO, Scholl F, editors. Kunststoffe, Fasern, Kautschuk, Harze, Ausgangs- und Hilfsstoffe, Abbauprodukte, Teil a. Spektren. 2nd ed. Weinheim: Verlag Chemie GmbH; 1984.
23. Cumberland D.J., Crawford R.J. The packing of particles 1987, Elsevier, Amsterdam.
24. Polymer data handbook 1999, Oxford University Press, New York. J.E. Mark (Ed.).
25. Juhasz J.A., Best S.M., Brooks R., Kawashita M., Miyata N., Kokubo T., et al. Mechanical properties of glass-ceramic A-W-polyethylene composites: effect of filler content and particle size. Biomaterials 2004, 25:949-955.
26. Zappini G. Dental materials with a high flexural modulus. United States Patent 0068679. US patents, USA; 2010.
27. Choi K.K., Ferracane J.L., Hilton T.J., Charlton D. Properties of packable dental composites. J Esth Rest Dent 2000, 12:216-226.
28. Manhart J., Kunzelmann K.-H., Chen H.Y., Hickel R. Mechanical properties and wear behavior of light-cured packable composite resins. Dent Mater 2000, 16:33-40.
29. Lu H., Lee Y.K., Oguri M., Powers J.M. Properties of a dental resin composite with a spherical inorganic filler. Oper Dent 2006, 31:734-740.
30. Abe Y., Lambrechts P., Inoue S., Braem M.J.A., Takeuchi M., Vanherle G., et al. Dynamic elastic modulus of 'packable' composites. Dent Mater 2001, 17:520-525.
31. Willems G., Lambrechts P., Braem M., Celis J.P., Vanherle G. A classification of dental composites according to their morphological and mechanical characteristics. Dent Mater 1992, 8:310-319.
32. Scougall-Vilchis R.J., Hotta Y., Hotta M., Idono T., Yamamoto K. Examination of composite resins with electron microscopy, microhardness tester and energy dispersive X-ray microanalyzer. Dent Mater J 2009, 28:102-112.
33. Labella R., Braden M., Deb S. Novel hydroxyapatite-based dental composites. Biomaterials 1994, 15:1197-1200.
34. Wongkhantee S., Patanapiradej V., Maneenut C., Tantbirojn D. Effect of acidic food and drinks on surface hardness of enamel, dentine, and tooth-coloured filling materials. J Dent 2006, 34:214-220.
35. Palma-Dibb R.G., Palma A.E., Matson E., Chinelatti M.A., Ramos R.P. Microhardness of esthetic restorative materials at different depths. Mater Res 2003, 6:85-90.
36. Topcu F.T., Erdemir U., Sahinkesen G., Yildiz E., Uslan I., Acikel C. Evaluation of microhardness, surface roughness, and wear behavior of different types of resin composites polymerized with two different light sources. J Biomed Mater Res 2010, 92B:470-478.
37. Schmitt L., Lurtz C., Behrend D., Schmitz K.P. Registered microhardness of human teeth parts and dental filling composites. IFMBE Proc 2009, 22(17):2252-2254.
38. Medeiros I.S., Gomes M.N., Loguercio A.D., Filho L.E. Diametral tensile strength and Vickers hardness of a composite after storage in different solutions. J Oral Sci 2007, 49:61-66.
39. 2 nanoparticles/high density polyethylene composite: Effect of filler content. J Mater Sci Mater Med 2007, 18:661-668.