Measurement of the total energy release rate for cracks in PZT under combined mechanical and electrical loading

Journal of Applied Mechanics, Transactions ASME

Volumn 74, Issue 6, 2007, Pages 1197-1211

  Jelitto, H ^a   Felten, F ^a,d   Swain, M V ^b   Balke, H ^c   Schneider, G A ^a  

^a HAMBURG UNIVERSITY OF TECHNOLOGY   (Germany)

^b UNIVERSITY OF SYDNEY   (Australia)

^c DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

^d ROBERT BOSCH GMBH   (Germany)

Author keywords

Compliance; Energy release rate; Fracture criterion; Piezoelectric; PZT

Indexed keywords

CAPACITANCE; DEMODULATION; ENERGY RELEASE RATE; LEAD COMPOUNDS;

CUSTOMMADE DEVICES; FRACTURE CRITERION; LEAD ZIRCONATE TITANATE (PZT);

CRACK PROPAGATION;

EID: 38049173223     PISSN: 00218936     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2744027     Document Type: Article

References (35)

1. Haertling, G. H., 1999, "Ferroelectric Ceramics: History and Technology," J. Am. Ceram. Soc., 82(4), pp. 797-818.
2. Freiman, S. W., and Pohanka, R. C., 1989, "Review of Mechanically Related Failures of Ceramic Capacitors," J. Am. Ceram. Soc., 72(12), pp. 2258-2263.
3. Suo, Z., Kuo. C.-M., Barnett, D. M., and Willis, J. R., 1992, "Fracture Mechanics for Piezoelectric Ceramics," J. Mech. Phys. Solids, 40(4), pp. 739-765.
4. McMeeking, R. M., 1989, "Electrostrictive Stresses Near Crack-Like Flaws," ZAMP, 40, pp. 615-627.
5. McMeeking, R. M., 2001, "Towards a Fracture Mechanics for Brittle Piezoelectric and Dielectric Materials," Int. J. Fract., 108(1), pp. 25-41.
6. Guiu, F., Algueró, M., and Reece, M. J., 2003, "Crack Extension Force and Rate of Mechanical Work of Fracture in Linear Dielectrics and Piezoelectrics," Philos. Mag., 83(7), pp. 873-888.
7. Zhang, T. Y., Zhao, M., and Tong, P., 2002, "Fracture of Piezoelectric Ceramics." Adv. Appl. Mech., 38, pp. 147-289.
8. Park, S., and Sun, C.-T., 1995, "Fracture Criteria for Piezoelectric Ceramics," J. Am. Ceram. Soc., 78(6), pp. 1475-1480.
9. Tobin, A. G., and Pak, Y. E., 1993, "Effect of Electric Fields on Fracture Behavior of PZT Ceramics," Proc SPIE, 1916, pp. 78-86.
10. Wang, H., and Singh, R. N., 1997, "Crack Propagation in Piezoelectric Ceramics: Effects of Applied Electric Fields," J. Appl. Phys., 81(11), pp. 7471-7479.
11. Lynch, C. S., 1998, "Fracture of Ferroelectric and Relaxor Electro-Ceramics: Influence of Electric Field," Acta Mater., 46(2), pp. 599-608.
12. Fu, R., and Zhang, T. Y., 2000, "Effects of an Electric Field on the Fracture Toughness of Poled Lead Zirconate Titanate Ceramics," J. Am. Ceram. Soc., 83(5), pp. 1215-1218.
13. 3," J. Eur. Ceram. Soc., 19, pp. 1299-1306.
14. Schneider, G. A., Feiten, F., and McMeeking, R. M.. 2003, "The Electrical Potential Difference Across Cracks in PZT Measured by Kelvin Probe Microscopy and the Implications for Fracture," Acta Mater., 51, pp. 2235-2241.
15. Balke, H., Kemmer, G., and Drescher, J., 1997, "Some Remarks on Fracture Mechanics of Piezoelectric Solids," Proceedings of the International Conference and Exhibition of Micro Materials'97, B. Michel and T. Winkler, eds., pp. 398-401.
16. Haug, A., and McMeeking, R., 2006, "Cracks With Surface Charge in Poled Ferroelectrics," Eur. J. Mech. A/Solids, 25, pp. 24-41.
17. Landis, C. M., 2004, "Energetically Consistent Boundary Conditions for Electromechanical Fracture," Int. J. Solids Struct., 41, pp. 6291-6315.
18. Jelitto, H., Feiten, F., Häusler, C., Kessler, H., Balke, H., and Schneider, G. A., 2005, "Measurement of Energy Release Rates for Cracks in PZT Under Electromechanical Loads," Electroceramics 2004, J. Eur, Ceram. Soc., 25, pp. 2817-2820.
19. Sakai, M., and Bradt, R. C., 1986, "Graphical Methods for Determining the Nonlinear Fracture Parameters of Silica and Graphite Refractory Composites," Fourth International Symposium on the Fracture Mechanics of Ceramics, VPI, Chicago, June 19-21, 1985, Plenum Press, New York, Vol. 7, pp. 127-142.
20. Rose, L. R. F., and Swain, M. V., 1986, "Two R-Curves for Partially Stabilized Zirkonia," J. Am. Ceram. Soc., 69(3), pp. 203-207.
21. Kreher, W. S., 2002, "Influence of the Domain Switching Zones on the Fracture Toughness of Ferroelectrics," J. Mech. Phys. Solids, 50, pp. 1029-1050.
22. Suo, Z., 1991, "Mechanics Concepts for Failure in Ferroelectric Ceramics," Smart Structures and Materials, ASME 1991, AD-Vol. 24/AMD-Vol. 123, pp. 1-6.
23. Jelitto, H., Keßler, H., Schneider, G. A., and Balke, H., 2004, "Fracture Behavior of Poled Piezoelectric PZT Under Mechanical and Electrical Loads," J. Eur. Ceram. Soc., 25(5), pp. 749-757.
24. Kübler, J., 1998, "Bestimmung der Bruchzähigkeit keramischer Werkstoffe mit der SEVNB Methode: Resultate eines VAMAS/ESIS Ringversuches," in Proceedings of the Werkstoffwoche, EMPA, Dubendorf, Switzerland.
25. Kübier, J., 2001, "Fracture Toughness of Ceramics Using the SEVNB Method: From a Preliminary Study to a Standard Test Method," in Fracture Resistance Testing of Monolithic and Composite Brittle Materials, ASTM STP 1409, J. A. Salem, M. G. Jenkins, and G. D. Quinn, eds., American Society for Testing and Materials, West Conshohocken, PA.
26. Fett, T., Münz, D., and Thun, G., 1995, "Evaluation of Bridging Parameters in Aluminas From R-Curves by Use of the Fracture Mechanical Weight Function," J. Am. Ceram. Soc., 78(4), pp. 949-951.
27. Jelitto, H., Feiten, F., and Schneider, G. A., 2005, " Experimenteller Aufbau zur Messung der Energiefreisetzungsrate für Risswachstum in PZT unter elektromechanischer Last," DVM-Bericht 237, 37. Tagung des DVM-Arbeitskreises Bruchvorgänge, Technische Sicherheit, Zuverlässigkeit und Lebensdauer, pp. 365-372.
28. Heyer, V., Schneider, G. A., Balke, H., Drescher, J., and Bahr, H.-A., 1998, "A Fracture Criterion for Conducting Cracks in Homogeneously Poled Piezoelec tric PZT-PIC151 Ceramics," Acta Mater., 46(18), pp. 6615-6622.
29. 3 Single Crystals Evaluated by Scanning Force Microscopy," Surf. Sci., 480, pp. L402-L410.
30. Kemmer, G., 2000, "Berechnung von elektromagnetischen Intensitätsparametern bei Rissen in Piezokeramiken," Fortschritt-Berichte VDI, Reihe 18, Nr. 261, VDI Verlag, Düsseldorf (in German), p. 33.
31. Kessler, H., Balke, H., Jelitto, H., and Schneider, G. A., 2004, "An Approximation for Electrically Semipermeable Edge Cracks and its Application to Fracture Analysis of PZT," Proc. Appl. Math. Mech., 4, pp. 282-283.
32. Kounga Njiwa, A. B., Lupascu, D. C., and Rodel, J., 2004, "Crack Tip Switching Zone in Ferroelectric Ferroelastic Materials," Acta Mater., 52, pp. 4919-4927.
33. Hackemann, S., and Pfeiffer, W., 2003, "Domain Switching in Process Zones of PZT: Characterization by Microdiffraction and Fracture Mechanical Methods," J. Eur. Ceram. Soc., 23, pp. 141-151.
34. 3 und PZT," FortschrittBerichte VDI, Reihe 5, Nr. 614, VDI Verlag, Düsseldorf (in German), pp. 159-160.
35. Hwang, S. C., Lynch, C S., and McMeeking, R. M., 1995, "Ferroelectric/ Ferroelastic Interactions and a Polarization Switching Model," Acta Metall. Mater., 43(5), pp. 2073-2084.