Evaluation of microhardness, surface roughness, and wear behavior of different types of resin composites polymerized with two different light sources

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 92, Issue 2, 2010, Pages 470-478

  Topcu, Fulya Toksoy ^a   Erdemir, Ugur ^b   Sahinkesen, Gunes ^a   Yildiz, Esra ^b   Uslan, Ibrahim ^c   Acikel, Cengizhan ^a  

^a GULHANE SCHOOL OF MEDICINE   (Turkey)

^b ISTANBUL UNIVERSITY   (Turkey)

^c GAZI UNIVERSITY   (Turkey)

Author keywords

Light curing units; Microhardness; Resin composites; Surface roughness; Wear

Indexed keywords

BONFERRONI CORRECTION; BOTTOM SURFACES; HARDNESS VALUES; IN-VITRO; LIGHT CURING UNITS; NANOCOMPOSITE MATERIALS; PIN ON DISC; QUARTZ TUNGSTEN HALOGEN; RESIN COMPOSITES; STATISTICAL ANALYSIS; SURFACE PROFILOMETERS; T-TESTS; WEAR BEHAVIORS; WEAR TEST;

ANALYSIS OF VARIANCE (ANOVA); CURING; LIGHT; LIGHT EMITTING DIODES; METAL ANALYSIS; MICROHARDNESS; NANOCOMPOSITES; OXIDE MINERALS; PHYSICAL OPTICS; POLYMERIZATION; QUARTZ; REGRESSION ANALYSIS; RESINS; STATISTICAL TESTS; SURFACE PROPERTIES; SURFACE ROUGHNESS; SURFACES; TUNGSTEN; VICKERS HARDNESS; WEAR RESISTANCE;

SURFACE RESISTANCE;

NANOCOMPOSITE; POLYMER; RESIN;

ANALYSIS OF VARIANCE; ARTICLE; COMPOSITE MATERIAL; CONTROLLED STUDY; DENTAL TECHNOLOGY; EVALUATION; HARDNESS; LIGHT; LIGHT EMITTING DIODE; MECHANICAL STRESS; POLYMERIZATION; STATISTICAL ANALYSIS; STUDENT T TEST;

COMPOSITE RESINS; DATA INTERPRETATION, STATISTICAL; HARDNESS; HARDNESS TESTS; LIGHT; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; POLYMERS; PROSTHESIS FAILURE; SURFACE PROPERTIES;

EID: 74749097613     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31540     Document Type: Article

References (42)

1. Hickel R, Manhart J, Garcia-Godoy F. Clinical results and new developments of direct posterior restorations. Am J Dent 2000;13:41D-54D.
2. Kugel G. Direct and indirect adhesive restorative materials: A review. Am J Dent 2000;13:35D-40D.
3. Lu H, Roeder LB, Lei L, Powers JM. Effect of surface roughness on stain resistance of dental resin composites. J Esthet Restor Dent 2005;17:102-109.
4. Ruddell DE, Maloney MM, Thompson JY. Effect of novel filler particles on the mechanical and wear properties of dental composites. Dent Mater 2002;18:72-80.
5. Xu HH, Quinn JB, Smith DT, Antonucci JM, Schumacher GE, Eichmiller FC. Dental resin composites containing silicafused whiskers-effects of whisker-to-silica ratio on fracture toughness and indentation properties. Biomaterials 2002;23: 735-742.
6. Li Y, Swartz ML, Phillips RW, Moore BK, Roberts TA. Effect of filler content and size on properties of composites. J Dent Res 1985;64:1396-1401.
7. Leinfelder KF. Posterior composites. State-of-the-art clinical application. Dent Clin North Am 1993;37:411-418.
8. Mitra SB, Wu D, Holmes BN. An application of nanotechnology in advanced dental materials. J Am Dent Assoc 2003; 134:1382-1390.
9. Moszner N, Klapdohr S. Nanotechnology for dental composites. Int J Nanotechnol 2004;1:130-156.
10. Martin FE. A survey of the efficiency of visible light curing units. J Dent 1998;26:239-243.
11. Miyazaki M, Hattori T, Ichiishi Y, Kondo M, Onose H, Moore BK. Evaluation of curing units used in private dental offices. Oper Dent 1998;23:50-54.
12. Rueggeberg FA, Ergle JW, Mettenburg DJ. Polymerization depths of contemporary light-curing units using microhardness. J Esthet Dent 2000;12:340-349.
13. Kurachi C, Tuboy AM, Magalhães DV, Bagnato VS. Hardness evaluation of a dental composite polymerized with experimental LED-based devices. Dent Mater 2001;17:309-315.
14. Hammesfahr PD, O'Connor MT, Wang X. Light-curing technology: Past, present and future. Compend Contin Educ Dent 2002;23:18-24.
15. Stahl F, Ashworth SH, Jandt KD, Mills RW. Light-emitting diode (LED) polymerization of dental composites: Flexural properties and polymerization potential. Biomaterials 2000;21: 1379-1385.
16. Fujibayashi K, Ishimaru K, Takahashi N, Kohno A. Newly developed curing unit using blue light-emitting diodes. Dent Jpn 1998;34:49-53.
17. Nomoto R. Effect of light wavelength on polymerization of light-cured resins. Dent Mater 1997;16:60-73.
18. Mills RW, Jandt KD, Ashworth SH. Dental composite depth of cure with halogen and blue light emitting diode technology. Br Dent J 1999;186:388-391.
19. Hansen EK, Asmussen E. Correlation between depth of cure and surface hardness of a light-activated resin. Scand J Dent Res 1993;101:62-64.
20. Baharav H, Abraham D, Cardash HS, Helft M. Effect of exposure time on the depth of polymerization of a visible lightcured composite resin. J Oral Rehabil 1988;15:167-172.
21. Prakki A, Cilli R, Mondelli RFL, Kalachandra S. In vitro wear, surface roughness and hardness of propanal-containing and diacetyl-containing novel composites and copolymers based on bis-GMA analogs. Dental Mater 2008;24:410-417.
22. Roulet JF. Degradation of Dental Polymers. Munich: Karger; 1987.
23. Heintze SD. How to qualify and validate wear simulation devices and methods. Dent Mater 2006;22:712-734.
24. McKinney JE, Wu W. Relationship between subsurface damage and wear of dental restorative composites. J Dent Res 1982;61:1083-1088.
25. Park SH, Lee CS. The difference in degree of conversion between light-cured and additional heat-cured composites. Oper Dent 1996;21:213-217.
26. Asmussen E. Factors affecting the quantity of remaining double bonds in restorative resin polymers. Scan J Dent Res 1982;90:490-496.
27. Neo BJ, Soh MS, Teo JW, Yap AUJ. Effectiveness of composite cure associated with different light-curing regimes. Oper Dent 2005;30:671-675.
28. Dunn WJ, Bush AC. A comparison of polymerization by light-emitting diode and halogen-based light-curing units. J Am Dent Assoc 2002;133:335-341.
29. Lohbauer U, Frankenberger R, Kramer N, Petschelt A. Strength and fatigue performance versus filler fraction of different types of direct dental restoratives. J Biomed Mater Res 2006;76:114-120.
30. Yoon TH, Lee YK, Lim BS, Kim CW. Degree of polymerization of resin composites by different light sources. J Oral Rehabil 2002;29:1165-1173.
31. Mota EG, Oshima HMS, Burnett LH Jr, Pires LAG, Rosa RS. Evaluation of diametral tensile strength and knoop microhardness of five nanofilled composites in dentin and enamel shades. Stom Baltic Dent Maxillofac J 2006;8:67-69.
32. Beun S, Glorieux T, Devaux J, Vreven J, Leloup G. Characterization of nanofilled compared to universal and microfilled composites. Dent Mater 2007;23:51-59.
33. Manhart J, Kunzelmann KH, Chen HY, Hickel R. Mechanical properties and wear behavior of lightcured packable composite resins. Dent Mater 2000;16:33-40.
34. Oberholzer TG, Grobler SR, Pameijer CH, Hudson APG. The effects of light intensity and method of exposure on the hardness of four light-cured dental restorative materials. Int Dent J 2003;53:211-215.
35. Lim BS, Ferracane JL, Condon JR, Adey JD. Effect of filler fraction and filler surface treatment on wear of microfilled composites. Dent Mater 2002;18:1-11.
36. Rahiotis C, Kakaboura A, Loukidis M, Vougiouklakis G. Curing efficiency of various types of light-curing units. Eur J Oral Sci 2004;112:89-94.
37. Lohbauer U, Rahiotis C, Kramer N, Petschelt A, Eliades G. The effect of different light-curing units on fatigue behavior and degree of conversion of a resin composite. Dent Mater 2005;2:608-615.
38. Yap AU, Lye KW, Sau CW. Surface characteristics of tooth-colored restoratives polished utilizing different polishing systems. Oper Dent 1997;22:260-265.
39. Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literature. Dent Mater 1997;13:258-269.
40. Tagtekin DA, Yanikoglu FC, Bozkurt FO, Kologlu B, Sur H. Selected characteristics of an Ormocer and conventional hybrid resin composite. Dent Mater 2004;20:487-497.
41. Sawyer WG, Freudenberg KD, Bhimaraj P, Schadler L. A study on the friction and wear behavior of PTFE filled with alumina nanoparticles. Wear 2003;254:573-580.
42. Kunzelmann KH. Glass-ionomer cements, cermet cements, 'hybrid'- glass- ionomers and compomers - laboratory trials - wear resistance. Trans Acad Dent Mater 1996;9:89-104.