Microstructure, residual stresses and shear strength of diamond-steel-joints brazed with a Cu-Sn-based active filler alloy

International Journal of Refractory Metals and Hard Materials

Volumn 30, Issue 1, 2012, Pages 16-24

  Buhl, Sebastian ^a,b   Leinenbach, Christian ^b   Spolenak, Ralph ^a   Wegener, Konrad ^a  

^a ETH ZURICH   (Switzerland)

^b EMPA Duebendorf   (Switzerland)

Author keywords

Brazing; Diamond; Microstructure; Residual stress; Shear strength

Indexed keywords

ACTIVE FILLERS; ALLOY INTERFACE; BRAZING PARAMETERS; BRAZING TEMPERATURE; COMPRESSIVE RESIDUAL STRESS; DWELL TIME; ENERGY DISPERSIVE X RAY SPECTROSCOPY; GRINDING TECHNOLOGIES; MAXIMUM VALUES; MICROSTRUCTURAL INVESTIGATION; MONOCRYSTALLINE; SHEAR TESTING; STAINLESS STEEL SUBSTRATES;

ALLOYS; BRAZING; CERIUM ALLOYS; COPPER ALLOYS; DIAMONDS; FILLERS; GRINDING (COMMINUTION); GRINDING (MACHINING); MICROSTRUCTURE; RESIDUAL STRESSES; SCANNING ELECTRON MICROSCOPY; SHEAR FLOW; STAINLESS STEEL; TIN; TIN ALLOYS; X RAY SPECTROSCOPY; ZIRCONIUM;

SHEAR STRENGTH;

EID: 80053973999     PISSN: 02634368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijrmhm.2011.06.006     Document Type: Article

References (69)

1. H.E. Hintermann, and A.K. Chattopadhyay New generation superabrasive tool with monolayer configuration Diamond Relat Mater 1 1992 1131 1143
2. C.M. Sung Brazed diamond grid: a revolutionary design for diamond saws Diamond Relat Mater 8 1999 1540 1543
3. J.C. Sung, and M. Sung The brazing of diamond Int J Refract Met Hard Mater 27 2009 382 393
4. S.F. Huang, H.L. Tsai, and S.T. Lin Laser brazing of diamond grits using a Cu-15Ti-10Sn brazing alloy Mater Trans 43 2002 2604 2608
5. A.K. Chattopadhyay, L. Chollet, and H.E. Hintermann Experimental investigation on induction brazing of diamond with Ni-Cr hardfacing alloy under Argon atmosphere J Mater Sci 26 1991 5093 5100
6. A.K. Chattopadhyay, L. Chollet, and H.E. Hintermann Induction brazing of diamond with Ni-Cr hardfacing alloy under Argon atomosphere Surf Coat Technol 45 1991 293 298 (Pubitemid 21677603)
7. C. Lee, J. Ham, and M. Song The interfacial reaction between diamond grit and Ni-based brazing filler metal Mater Trans 48 2007 889 891 (Pubitemid 46848029)
8. B.J. Ma, Y.C. Fu, W.F. Ding, W. Gao, and H.J. Xu Research on interfacial microstructure of Ti-coated diamond brazed and uncoated diamond brazed by high-frequency induction Adv Grind Abr Tech 359-360 2008 53 57
9. J.Y. Chen, H. Huang, and X.P. Xu An experimental study on the grinding of alumina with a monolayer brazed diamond wheel Int J Adv Manuf Technol 41 2009 16 23
10. A.J.S. Fernandes, M.J. Fonseca, F.M. Costa, R.F. Silva, and M.H. Nazare Ultramicrohardness cross-profiling of CVD diamond-steel brazed junctions Diamond Relat Mater 8 1999 855 858 (Pubitemid 129310365)
11. M. Kohzaki, K. Higuchi, S. Noda, and K. Uchida Large-area diamond deposition and brazing of the diamond films on steel substrates for tribological applications Diamond Relat Mater 2 1993 612 616
12. R.K. Shiue, S.T. Buljan, and T.W. Eagar Abrasion resistant active braze alloys for metal single layer technology Sci Technol Weld Joining 2 1997 71 78
13. W. Tillmann, and A.M. Osmanda Production of diamond tools by brazing Front Process Eng Adv Mater 502 2005 425 430 (Pubitemid 47569765)
14. A. Trenker, and H. Seidemann High-vacuum brazing of diamond tools Ind Diamond Rev 62 2002 49 51
15. E. Moret, and N. Eustathopoulos Ceramic-to-metal direct brazing J Phys IV 3 1993 1043 1052
16. U.E. Klotz, C.L. Liu, F.A. Khalid, and H.R. Elsener Influence of brazing parameters and alloy composition on interface morphology of brazed diamond Mater Sci Eng, A 495 2008 265 270
17. Liu CL. Characterisation and Modelling of Interface Reactions between Diamond and Active Brazing Alloys. PhD-Thesis, Eidgenössische Technische Hochschule Zürich ETHZ, Switzerland. 2007.
18. S.V. Yulyugin, G.A. Kolesnichenko, V.K. Yulyugin, V.A. Evdokimov, and Y.V. Naidich Adhesion and wetting in diamond - and carbide - melt systems and the liquid phase sintering of composites on their base A. Kumar, Y.W. Chung, J.J. Moore, J.E. Smugeresky, Surface engineering: science and technology I 1999 The Minerals, Metals & Materials Society Warrendale, PA 453 461
19. E.D. Kizikov, and V.P. Kebko Microadditions to alloys of the system Cu-Sn-Ti Met Sci Heat Treat 29 1987 68 71
20. M.J. Saarivirta Development of copper base high strength - medium conductivity alloys - Cu-Sn-Ti and Cu-Sn-Ti-Cr Trans Metall Soc AIME 221 1961 596 606
21. D. Evens, M. Nicholas, and P.M. Scott Wetting and bonding of diamonds by copper-tin-titanium alloys Ind Diamond Rev 1977 306 309
22. S. Hamar-Thibault, and C.H. Allibert New phases in the ternary Cu-Ti-Sn system J Alloys Compd 317 2001 363 366 (Pubitemid 32273024)
23. W. Heine, and U. Zwicker Phasen des B2-Strukturtyps (CsCl-Typ) in ternären Systemen mit Kupfer und Nickel Naturwiss 49 1962 391
24. Y.C. Hsieh, and S.T. Lin Microstructural development of Cu-Sn-Ti alloys on graphite J Alloys Compd 466 2008 126 132
25. S.F. Huang, H.L. Tsai, and S.T. Lin Crystal structure and X-ray diffraction pattern of CuSnTi3 intermetallic phase Intermet 13 2005 87 92
26. J.C. Schuster, M. Naka, and T. Shibayanagi Crystal structure of CuSn3Ti5 and related phases J Alloys Compd 305 2000 L1 L3
27. F. Weitzer, L. Perring, T. Shibayanagi, M. Naka, and J.C. Schuster Determination of the crystal structure of CuSnTi by full profile Rietveld analysis Powder Diffr 15 2000 91 93
28. C.L. Liu, U.E. Klotz, and J.F. Löffler Cu-Sn-Ti (Copper-Tin- Titanium) G. Effenberg, S. Ilyenko, Non-ferrous metal ternary systems selected soldering and brazing systems: phase diagrams, crystallographic and thermodynamic data: SpringerMaterials - the Landolt-Börnstein database 2007 409 421
29. H.R. Elsener, U.E. Klotz, F.A. Khalid, D. Piazza, and M. Kiser The role of binder content on microstructure and properties of a Cu-base active brazing filler metal for diamond and cBN Adv Eng Mater 7 2005 375 380 (Pubitemid 40822282)
30. E. Bonera, M. Fanciulli, and D.N. Batchelder Combining high resolution and tensorial analysis in Raman stress measurements of silicon J Appl Phys 94 2003 2729 2740
31. I. De Wolf Micro-Raman spectroscopy to study local mechanical stress in silicon integrated circuits Semicond Sci Technol 11 1996 139 154 (Pubitemid 126610785)
32. I. De Wolf Raman spectroscopy: about chips and stress Spectrosc Eur 15 2003 6 13
33. I. De Wolf, H.E. Maes, and S.K. Jones Stress measurements in silicon devices through Raman spectroscopy: bridging the gap between theory and experiment J Appl Phys 79 1996 7148 7156 (Pubitemid 126628936)
34. T. Wermelinger, C. Borgia, C. Solenthaler, and R. Spolenak 3-D Raman spectroscopy measurements of the symmetry of residual stress fields in plastically deformed sapphire crystals Acta Mater 55 2007 4657 4665 (Pubitemid 47058343)
35. S.I. Dos Santos, N.M. Balzaretti, and J.A.H. Da Jornada Adhesion between CVD diamond and WC-Co induced by high-pressure and high-temperature Diamond Relat Mater 15 2006 1457 1461 (Pubitemid 44149047)
36. F. Klocke, and T. Merbecks Characterization of vitrified cBN grinding wheels. 4th International Machining and Grinding Conference SME Conf Proc, Troy MI 2001
37. Y.V. Naidich, V.P. Umanskii, and I.A. Lavrinenko Strength of the diamond-metal interface and brazing of diamonds 2007 Cambridge International Science Publishing Ltd Cambridge
38. T. Yamazaki, and A. Suzumura Reaction products at brazed interface between Ag-Cu-V filler metal and diamond (111) J Mater Sci 41 2006 6409 6416 (Pubitemid 47385571)
39. T. Yamazaki, and A. Suzumura Relationship between X-ray diffraction and unidirectional solidification at interface between diamond and brazing filler metal J Mater Sci 35 2000 6155 6160 (Pubitemid 32076436)
40. S. Siegmann, M. Dvorak, H. Gruetzner, K. Nassenstein, and A. Walter Shear testing for characterizing the adhesive and cohesive coating strength without the need of adhesives Proc Int Therm Spray Conf 2005 2005 823 829
41. S. Buhl, C. Leinenbach, R. Spolenak, and K. Wegener Influence of the brazing parameters on microstructure, residual stresses and shear strength of diamond-metal joints J Mater Sci 45 2010 4358 4368
42. J.E. Field The properties of diamond 1979 Academic Press London
43. J.E. Field Strength, fracture and erosion properties of diamond J.E. Field, The properties of natural and synthetic diamond 1992 Academic Press London 473 513
44. J.E. Field Cleavage, fracture and tensile strength of diamond G. Davies, Properties and growth of diamond 1994 INSPEC London 36 51
45. E.D. Kizikov, and I.A. Lavrinenko Investigations of Cu-Sn-Ti alloys used for bonding diamond abrasive tools Met Sci Heat Treat 17 1975 61 65
46. C. Wegst, and M. Wegst Nachschlagewerk Stahlschüssel Verlag Stahlschüssel Wegst GmbH, Marbach 2007
47. N. Ikawa, S. Shimada, and T. Ono Microstrength of diamond Technol Rep Osaka Univ 26 1976 245 254
48. E. Anastassakis, A. Pinczuk, E. Burstein, F.H. Pollak, and M. Cardona Effect of static uniaxial stress on Raman spectrum of silicon Solid State Commun 8 1970 133 138
49. C.S.G. Cousins Elasticity of carbon allotropes. I. Optimization, and subsequent modification, of an anharmonic Keating model for cubic diamond Phys Rev B: Condens Matter 67 2003 241071 2410713
50. T. Englert, G. Abstreiter, and J. Pontcharra Determination of existing stress in silicon films on sapphire substrate using Raman-spectroscopy Solid-State Electron 23 1980 31 33 (Pubitemid 10455863)
51. S. Ganesan, A.A. Maradudin, and J. Oitmaa A lattice theory of morphic effects in crystals of diamond structure Ann Phys 56 1970 556 594
52. P. Klocek Handbook of infrared optical materials 1991 Marcel Dekker, Inc. New York
53. L.I. Duarte, U.E. Klotz, C. Leinenbach, M. Palm, F. Stein, and J.F. Loffler Experimental study of the Fe-Ni-Ti system Intermet 18 2010 374 384
54. D.N. Compton, A.W.R. Leitch, J.H. Neethling, and V.V. Kozyrkov A microstructural analysis of thin film TiNiSn Proc 15th Int Conf Thermoelectr 1996 491 493
55. H. Dvorakova Study of properties of metal solder Kovove Mater 5 1985 629 638
56. F.A. Khalid, U.E. Klotz, H.R. Elsener, B. Zigerlig, and P. Gasser On the interfacial nanostructure of brazed diamond grits Scripta Mater 50 2004 1139 1143
57. N.D. Marchuk, R.V. Skolozdra, and Y.V. Stadnyk Thermoelectric properties of new intermetallic compounds MMSn Proc 14th Int Conf Thermoelectr 1995 217 221
58. Z.S. Tan, and W.A. Jesser Microstructure analysis of thermoelectric TiNiSn alloy Proc 14th Int Conf Thermoelectr 1995 249 253
59. W. Rieger, H. Nowotny, and F. Benesovsky Verbindungen mit aufgefullten Mn5Si3-Typ Monatsh Chem 96 1965 98 103
60. W. Rieger, H. Nowotny, and F. Benesovsky Phasen mit oktaedrischen Bauelementen des Ubergangsmetalls Monatsh Chem 96 1965 232 241
61. Y. Zhu, B. Zheng, W. Yao, and L. Cao The interface diffusion and chemical reaction between a Ti layer and a diamond substrate Diamond Relat Mater 8 1999 1073 1078
62. T. Groegler, E. Zeiler, A. Hoerner, S.M. Rosiwal, and R.F. Singer Microwave-plasma-CVD of diamond coatings onto titanium and titanium alloys Surf Coat Technol 98 1998 1079 1091 (Pubitemid 128397034)
63. K.H. Chen, Y.L. Lai, J.C. Lin, K.J. Song, L.C. Chen, and C.Y. Huang Micro-Raman for diamond film stress analysis Diamond Relat Mater 4 1995 460 463
64. Q.H. Fan, J. Gracio, E. Pereira, V. Teixeira, and C.J. Tavares Determination of biaxial modulus of chemical vapor-deposited diamond films Thin Solid Films 398 2001 265 269 (Pubitemid 33107106)
65. V.G. Ralchenko, E.D. Obraztsova, K.G. Korotushenko, A.A. Smolin, S.M. Pimenov, and V.G. Pereverzev Stress in thin diamond films on various materials measured by microRaman spectroscopy Mechanical behavior of diamond and other forms of carbon Mater Res Soc Symp Proc 383 1995 Materials Research Society Pittsburgh, PA 153 158
66. S.F. Huang, H.L. Tsai, and S.T. Lin Effects of brazing route and brazing alloy on the interfacial structure between diamond and bonding matrix Mater Chem Phys 84 2004 251 258
67. W.C. Li, C. Liang, and S.T. Lin Epitaxial interface of nanocrystalline alloy and TiC formed between Cu-10Sn-15Ti diamond Diamond Relat Mater 11 2002 1366 1373 (Pubitemid 34731547)
68. W.C. Li, C. Liang, and S.T. Lin Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy Metall Mater Trans A 33 2002 2163 2172 (Pubitemid 34949971)
69. P. Scardi, M. Leoni, G. Cappuccio, V. Sessa, and M.L. Terranova Residual stress in polycrystalline diamond Ti-6Al-4 V systems Diamond Relat Mater 6 1997 807 811 (Pubitemid 127421682)