Influence of small amount of sintering additives on unlubricated sliding wear properties of SiC ceramics

Ceramics International

Volumn 37, Issue 8, 2011, Pages 3599-3608

  Manoj Kumar, B V ^a   Kim, Young Wook ^a   Lim, Dae Soon ^b   Seo, Won Seon ^c  

^a University of Seoul   (South Korea)

^b Korea University   (South Korea)

^c Korea Institute of Ceramic Engineering and Technology (KICET)   (South Korea)

Author keywords

Silicon carbide; Sintering additives; Sliding wear

Indexed keywords

ADDITIVE COMPOSITION; COEFFICIENT OF FRICTIONS; DUPLEX MICROSTRUCTURES; GRAIN BOUNDARY PHASE; MATERIAL LOSS; NITROGEN ATMOSPHERES; SIC CERAMICS; SIC POWDER; SINTERING ADDITIVES; SLIDING WEAR; STEADY STATE; TRIBOCHEMICAL WEAR; UNLUBRICATED SLIDING; WEAR PROPERTIES; WEAR RATES; WORN SURFACE MORPHOLOGY;

CERAMIC MATERIALS; FRICTION; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; HOT PRESSING; SILICON CARBIDE; SINTERING; WEAR OF MATERIALS;

ADDITIVES;

EID: 80053966648     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2011.06.018     Document Type: Article

References (42)

1. F.F. Lange Hot-pressing behaviour of silicon carbide powders with additions of aluminium oxide J. Mater. Sci. 10 1975 314 320
2. N.P. Padture In situ-toughened silicon carbide J. Am. Ceram. Soc. 77 1994 519 523
3. G. Roewer1, U. Herzog, K. Trommer, E. Miiller, and S. Friihauf Silicon carbide - a survey of synthetic approaches, properties and applications Struct. Bond. 101 2002 59 135
4. S.M. Hsu, and M. Sheng Wear prediction of ceramics Wear 256 2004 867 878 (Pubitemid 38571175)
5. X. Dong, S. Jahanmir, and L.K. Ives Wear transition diagram for silicon carbide Tribo. Int. 28 1995 559 572
6. D.C. Cranmer Friction and wear properties of monolithic silicon-based ceramics J. Mater. Sci. 20 1985 2029 2037 (Pubitemid 15509092)
7. K.H.Z. Gahr, R. Blattner, D.H. Hwang, and K. Pohlmann Micro and micro-tribological properties of SiC ceramics in sliding contact Wear 250 2001 299 310 (Pubitemid 33053065)
8. V.S.R. Murthy, H. Kobayashi, S. Tsurekawa, N. Tamari, T. Watanabe, and K. Kato Influence of humidity and doping elements on the friction and wear of SiC in unlubricated sliding Tribo. Int. 37 2004 353 364
9. Y. Wang, and S.M. Hsu Wear and wear transition mechanisms of ceramics Wear 195 1996 112 122
10. X.F. Zhang, G.Y. Lee, D. Chen, R.O. Ritchie, and L.C.D. Jonghe Abrasive wear behavior of heat-treated ABC-silicon carbide J. Am. Ceram. Soc. 86 2003 1370 1378
11. P. Anderson, and A. Blomberg Instability in the tribochemical wear of silicon carbide in unlubricated sliding contacts Wear 174 1994 1 7 (Pubitemid 279562)
12. 4 Wear 70 1981 37 51 (Pubitemid 12438971)
13. S.J. Cho, C.D. Um, and S.S. Kim Wear and wear transition in silicon carbide ceramics during sliding J. Am. Ceram. Soc. 79 1996 1247 1251
14. O.B. Lopez, A.L. Ortiz, F. Guiberteau, and N.P. Padture Sliding-wear-resistant liquid-phase-sintered SiC processed using α-SiC starting powders J. Am. Ceram. Soc. 90 2007 541 545 (Pubitemid 46160504)
15. O.B. Lopez, A.L. Ortiz, F. Guiberteau, and N.P. Padture Effect of microstructure on sliding-wear properties of liquid-phase-sintered α-SiC J. Am. Ceram. Soc. 88 2005 2159 2163 (Pubitemid 41557838)
16. O.B. Lopez, A.L. Ortiz, F. Guiberteau, and N.P. Padture Microstructural design of sliding-wear-resistant liquid-phase-sintered SiC: an overview J. Eur. Ceram. Soc. 27 2007 3351 3357 (Pubitemid 46760341)
17. D. Chen, X.F. Zhang, and R.O. Ritchie Effects of grain-boundary structure on the strength, toughness, and cyclic-fatigue properties of a monolithic silicon carbide J. Am. Ceram. Soc. 83 2000 2079 2081
18. 3 additives J. Eur. Ceram. Soc. 21 2001 1013 1019 (Pubitemid 32546113)
19. S.G. Lee, Y.W. Kim, and M. Mitomo Relationship between microstructure and fracture toughness of toughened silicon carbide ceramics J. Am. Ceram. Soc. 84 2001 1347 1353 (Pubitemid 33669950)
20. R. Yuan, J.J. Kruzic, X.F. Zhang, L.C. De Jonghe, and R.O. Ritchie Ambient to high-temperature fracture toughness and cyclic fatigue behavior in Al-containing silicon carbide ceramics Acta Mater. 51 2003 6477 6491
21. 3 (RE: Y, Yb) J. Am. Ceram. Soc. 85 2002 1007 1009
22. Y.W. Kim, M. Mitomo, and T. Nishumura Heat-resistant silicon carbide with aluminum nitride and erbium oxide J. Am. Ceram. Soc. 84 2001 2060 2064 (Pubitemid 33670210)
23. P.F. Becher Microstructural design of toughened ceramics J. Am. Ceram. Soc. 74 1991 255 269
24. H. Ye, G. Rixecker, S. Haug, and F. Aldinger Compositional identification of the intergranular phase in liquid phase sintered SiC J. Eur. Ceram. Soc. 22 2002 2379 2387 (Pubitemid 35003367)
25. K. Biswas, J. Schneider, G. Rixecker, and F. Aldinger Comparative bending creep behaviour of silicon carbide sintered with oxynitride additives Scripta Mater. 53 2005 591 596 (Pubitemid 40834122)
26. H.J. Choi, Y.W. Kim, M. Mitomo, T. Nishimura, J.H. Lee, and D.Y. Kim Intergranular glassy phase free SiC ceramics retains strength at 1500 °C Scripta Mater. 50 2004 1203 1207
27. Y.W. Kim, S.H. Lee, T. Nishumura, and M. Mitomo Heat-resistant silicon carbide with aluminum nitride and scandium oxide Acta Mater. 53 2005 4701 4708 (Pubitemid 41261957)
28. Y.W. Kim, J.H. Lee, and D.Y. Kim Effect of sintering additive composition on grain boundary structure in liquid-phase-sintered silicon carbide Mater. Sci. Forum 558-559 2007 897 902
29. Y.W. Kim, Y.S. Chun, T. Nishumura, M. Mitomo, and Y.H. Lee High-temperature strength of silicon carbide ceramics sintered with rare-earth oxide and aluminum nitride Acta Mater. 55 2007 727 736 (Pubitemid 44909624)
30. 3 (RE: Sc, Lu, Y) and AlN J. Mater. Sci. 44 2009 5939 5943
31. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements J. Am. Ceram. Soc. 64 1981 533 538
32. D.S. Lim, J.W. An, and H.J. Lee Effect of carbon nanotube addition on the tribological behavior of carbon/carbon composites Wear 252 2002 512 517 (Pubitemid 34306033)
33. H.J. Choi, G.H. Kim, J.G. Lee, and Y.W. Kim Refined continuum model on the behavior of intergranular films in silicon nitride ceramics J. Am. Ceram. Soc. 83 2000 2821 2827
34. G. Rixecker, K. Biswas, A. Rosinus, S. Sharma, I. Weidmann, and F. Aldinger Fracture properties of SiC ceramics with oxynitride additives J. Eur. Ceram. Soc. 22 2002 2669 2675
35. N.P. Padture, and B.R. Lawn Toughness properties of a silicon carbide with an in situ induced heterogeneous grain structure J. Am. Ceram. Soc. 77 1994 2518 2522
36. J.Y. Kim, Y.W. Kim, M. Mitomo, G.D. Zhan, and J.G. Lee Microstructure and mechanical properties of α-silicon carbide sintered with yttrium-aluminum garnet and silica J. Am. Ceram. Soc. 82 1999 441 444
37. Y. Zhou, K. Hirao, Y. Yamauchi, and S. Kanzaki Tailoring the mechanical properties of silicon carbide ceramics by modification of the intergranular phase chemistry and microstructure J. Eur. Ceram. Soc. 22 2002 2689 2696
38. T.E. Fischer, Z. Zhu, H. Kim, and D.D. Shin Genesis and role of wear debris in sliding wear of ceramics Wear 245 2000 53 60
39. P. Anderson, J. Juhanko, A.P. Nikkila, and P. Lintula Influence of topography on the running-in of water-lubricated silicon carbide journal bearings Wear 201 1996 1 9
40. T.E. Fischer, and H. Tomizawa Interaction of tribochemistry and microfracture in the friction and wear of silicon nitride Wear 105 1985 29 45 (Pubitemid 15602173)
41. M. Kalin, S. Jahanmir, and G. Drazic Wear mechanisms of glass-infiltrated alumina sliding against alumina in water J. Am. Ceram. Soc. 88 2005 346 352 (Pubitemid 43026566)
42. A. Krell, and P. Blank Inherent reinforcement of ceramic microstructure by grain boundary engineering J. Eur. Ceram. Soc. 9 1992 309 322