Microstructure and Mechanical Properties of α-Silicon Carbide Sintered with Yttrium-Aluminum Garnet and Silica

Journal of the American Ceramic Society

Volumn 82, Issue 2, 1999, Pages 441-444

  Kim, Jae Yeon ^a   Kim, Young Wook ^a   Mitomo, Mamoru ^b   Zhan, Guo Dong ^b   Lee, June Gunn ^c  

^a University of Seoul   (South Korea)

^b NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

^c Korea Institute of Science and Technology   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

ADDITIVES; ALUMINUM; ANNEALING; BENDING STRENGTH; CRYSTAL MICROSTRUCTURE; FRACTURE TOUGHNESS; GARNETS; GRAIN BOUNDARIES; SILICA; SINTERING; THERMAL EXPANSION; YTTRIUM;

GLASS-PHASE CHEMISTRY; THERMAL EXPANSION MISMATCH; YTTRIUM-ALUMINUM GARNET;

SILICON CARBIDE;

EID: 0033078320     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1551-2916.1999.tb20082.x     Document Type: Article

References (27)

1. S. Prochazka, "The Role of Boron and Carbon in the Sintering of Silicon Carbide"; pp. 171-81 in Special Ceramics 6. Edited by P. Popper. British Ceramic Research Association, Stoke-on-Trent, U.K., 1975.
2. M. Omori and H. Takei, "Pressureless Sintering of SiC," J. Am. Ceram. Soc., 65 [6] C-92 (1982).
3. P. Padture, "In Situ-Toughened Silicon Carbide," J. Am. Ceram. Soc., 77 [2] 519-23 (1994).
4. 3 Additions," J. Mater. Sci., 29, 934-38 (1994).
5. 3 Additives," J. Am. Ceram. Soc., 77 [6] 1655-58 (1994).
6. R. A. Cutler and T. B. Jackson, "Liquid Phase Sintered Silicon Carbide"; pp. 309-18 in Ceramic Materials and Components for Engines, Proceedings of the Third International Symposium. Edited by V. J. Tennery. American Ceramic Society, Westerville, OH, 1989.
7. M. A. Mulla and V. D. Krstic, "Low-Temperature Pressureless Sintering of ß-Silicon Carbide with Aluminum Oxide and Yttrium Oxide Additions," Am. Ceram. Soc. Bull., 70 [3] 439-43 (1991).
8. L. Cordrey, D. E. Niesz, and D. J. Shanefield, "Sintering of Silicon Carbide with Rare-Earth Oxide Additions"; pp. 618-36 in Sintering of Advanced Ceramics, Vol. 7. Edited by C. A. Handwerker, J. E. Blendell, and W. A. Kaysser. American Ceramic Society, Westerville, OH, 1990.
9. W. Böcker, H. Landfermann, and H. Hausner, "The Influence of Powder Characteristics on the Sintering of α-SiC," Powder Metall. Int., 13 [1] 37-39 (1981).
10. Y.-W. Kim, H. Tanaka, M. Mitomo, and S. Otani, "Influence of Powder Characteristics on Liquid Phase Sintering of Silicon Carbide," J. Ceram. Soc. Jpn., 103 [3] 257-61 (1995)
11. Y.-W. Kim, M. Mitomo, and J. G. Lee, "Influence of Silica Content on Liquid Phase Sintering of Silicon Carbide with Yttrium-Aluminum Garnet," J. Ceram. Soc. Jpn., 104 [9] 816-18 (1996).
12. Y.-W. Kim, M. Mitomo, H. Emoto, and J. G. Lee, "Effect of α/ß Phase Ratio on Densification and Microstructure of Silicon Carbide"; pp. 638-42 in Proceedings of the 6th International Symposium on Ceramic Materials and Components for Engines. Edited by K. Niihara, S. Hirano, S. Kanzaki, K. Komeya, and K. Morinaga. Technoplaza Co., Ltd. Tokyo, Japan, 1998.
13. Y.-W. Kim, M. Mitomo, H. Emoto, and J. G. Lee, "Effect of Initial α-Phase Content on Microstructure and Mechanical Properties of Sintered Silicon Carbide," J. Am. Ceram. Soc., 81 [12] 3136-40 (1998).
14. D. H. Cho, Y.-W. Kim, and W. J. Kim, "Strength and Fracture Toughness of In Situ-Toughened Silicon Carbide," J. Mater. Sci., 32, 4777-82 (1997).
15. J. J. Cao, W. J. MoberlyChan, L. C. De Jonghe, C. J. Gilbert, and R. O. Ritchie, "In Situ Toughened Silicon Carbide with Al-B-C Additions," J. Am. Ceram. Soc., 79 [2] 461-69 (1996).
16. N. P. Padture and B. R. Lawn, "Toughness Properties of a Silicon Carbide with an In Situ Induced Heterogeneous Grain Structure." J. Am. Ceram. Soc., 77 [10] 2518-22 (1994).
17. Y.-W. Kim, M. Mitomo, and H. Hirotsuru, "Grain Growth and Fracture Toughness of Fine-Grained Silicon Carbide Ceramics." J. Am. Ceram. Soc., 78 [11] 3145-48 (1995).
18. 3, Additions," Acta Metall. Mater., 42 [1] 303-308 (1994).
19. Y.-W. Kim, M. Mitomo, and H. Hirotsuru, "Microstructural Development of Silicon Carbide Containing Large Seed Grains." J. Am. Ceram. Soc., 80 [1] 99-105 (1997).
20. T. Mitchell Jr., L. C. De Jonghe, W. J. MoberlyChan, and R. O. Ritchie, "Silicon Carbide Platelet/Silicon Carbide Composites," J. Am. Ceram. Soc., 78 [1] 97-103 (1995).
21. D. H. Lee, H. E. Kim, and S. J. Cho, "Microstructure and Fracture Toughness of Hot-Pressed Silicon Carbide Reinforced with Silicon Carbide Whiskers," J. Am. Ceram. Soc., 77 [12] 3270-72 (1994).
22. M. Mitomo and S. Uenosono, "Microstructural Development During Gas-Pressure Sintering of α-Silicon Nitride," J. Am. Ceram. Soc., 75 [1] 103-108 (1992).
23. G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, "A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements," J. Am. Ceram. Soc., 64 [9] 533-38 (1981).
24. L. S. Sigl and H. J. Kleebe, "Core/Rim Structure of Liquid-Phase-Sintered Silicon Carbide," J. Am. Ceram. Soc., 76 [3] 773-76 (1993).
25. C. S. Lee, Y.-W. Kim, D. H. Cho, H. B. Lee, and H. J. Lim, "Microstructure and Mechanical Properties of Self-Reinforced Alpha-Silicon Carbide," Ceram. Int., 24 [7] 489-95 (1998).
26. P. F. Becher, "Microstructural Design of Toughened Ceramics," J. Am. Ceram. Soc., 74 [2] 255-69 (1991).
27. P. F. Becher, E. Y. Sun, C.-H. Hsueh, K. B. Alexander, S.-L. Hwang, S. B. Waters, and C. G. Westmoreland, "Debonding of Interfaces between ß-Silicon Nitride Whiskers and Si-Al-Y Oxynitride Glasses." Acta Mater., 44 [10] 3881-93 (1996).