Fatigue resistance and failure mode of CAD/CAM composite resin implant abutments restored with type III composite resin and porcelain veneers

Clinical Oral Implants Research

Volumn 22, Issue 11, 2011, Pages 1275-1281

  Magne, Pascal ^a   Oderich, Elisa ^b   Boff, Luís Leonildo ^b   Cardoso, Antônio Carlos ^b   Belser, Urs Christoph ^c  

^a UNIVERSITY OF SOUTHERN CALIFORNIA   (United States)

^b FEDERAL UNIVERSITY OF SANTA CATARINA   (Brazil)

^c UNIVERSITY OF GENEVA   (Switzerland)

Author keywords

Adhesion; CAD CAM; Composite resin; Dental implant; Fatigue resistance; Implant abutment; Porcelain

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS; GLASS CERAMICS; HYDROFLUORIC ACID; OPTIBOND FL; PARADIGM MZ100; RESIN; RESIN CEMENT; SILANE DERIVATIVE; SILICON DIOXIDE; Z100 COMPOSITE RESIN; ZIRCONIUM;

ARTICLE; CERAMICS; CHEMISTRY; COMPARATIVE STUDY; COMPUTER AIDED DESIGN; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL ETCHING; DENTAL SURGERY; DENTURE; HUMAN; MASTICATION; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; SURVIVAL; TOOTH IMPLANTATION; TOOTH PROSTHESIS;

ACID ETCHING, DENTAL; BITE FORCE; CERAMICS; COMPOSITE RESINS; COMPUTER-AIDED DESIGN; DENTAL ABUTMENTS; DENTAL BONDING; DENTAL ETCHING; DENTAL IMPLANTS; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION FAILURE; DENTAL VENEERS; HUMANS; HYDROFLUORIC ACID; MATERIALS TESTING; RESIN CEMENTS; SILANES; SILICON DIOXIDE; STRESS, MECHANICAL; SURVIVAL ANALYSIS; ZIRCONIUM;

EID: 80053912626     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2010.02103.x     Document Type: Article

References (58)

1. Andersson, B., Odman, P., Carlsson, L. & Brånemark, P.I. (1992) A new Brånemark single tooth abutment: handling and early clinical experiences. The International Journal of Oral Maxillofacial Implants 7: 105-111.
2. Andreasen, F.M., Flugge, E., Daugaard-Jensen, J. & Munksgaard, E.C. (1992) Treatment of crown fractured incisors with laminate veneer restorations. An experimental study. Endodontics & Dental Traumatology 8: 30-35.
3. Andriani, W.J., Suzuki, M., Bonfante, E.A., Carvalho, R.M., Silva, N.R. & Coelho, P.G. (2010) Mechanical testing of indirect composite materials directly applied on implant abutments. The Journal of Adhesive Dentistry 12: 1-7.
4. Att, W., Kurun, S., Gerds, T. & Strub, J.R. (2006a) Fracture resistance of single-tooth implant-supported all-ceramic restorations: an in vitro study. The Journal of Prosthetic Dentistry 95: 111-116.
5. Att, W., Kurun, S., Gerds, T. & Strub, J.R. (2006b) Fracture resistance of single-tooth implant-supported all-ceramic restorations after exposure to the artificial mouth. The Journal of Oral Rehabilitation 33: 380-386.
6. Babbush, C.A., Kirsch, A., Mentag, P.J. & Hill, B. (1987) Intramobile cylinder (IMZ) two-stage osteointegrated implant system with the intramobile element (IME): part I. Its rationale and procedure for use. The International Journal of Oral & Maxillofacial Implants 2: 203-216.
7. Baratieri, L.N., Araujo, E.M. & Monteiro, S. Jr (2005) Composite Restorations in Anterior Teeth: Fundamentals and Possibilities. São Paulo, SP: Quintessence Publishing.
8. Behr, M., Rosentritt, M., Lang, R. & Handel, G. (2001) Glass fiber-reinforced abutments for dental implants. A pilot study. Clinical Oral Implants Research 12: 174-178.
9. Belser, U.C., Bernard, J.P. & Buser, D. (1996) Implant-supported restorations in the anterior region: prosthetic considerations. The Practical Periodontics Aesthetic Dentistry 8: 875-883.
10. Brunski, J.B. (1992) Biomechanical factors affecting the bone-dental implant interface. Clinical Materials 10: 153-201.
11. Cibirka, R.M., Razzoog, M.E., Lang, B.R. & Stohler, C.S. (1992) Determining the force absorption quotient for restorative materials used in implant occlusal surfaces. The Journal of Prosthetic Dentistry 67: 361-364.
12. Ciftçi, Y. & Canay, S. (2000) The effect of veneering materials on stress distribution in implant-supported fixed prosthetic restorations. The International Journal of Oral & Maxillofacial Implants 15: 571-582.
13. Curtis, A.R., Wright, A.J. & Fleming, G.J. (2006) The influence of surface modification techniques on the performance of a Y-TZP dental ceramic. The Journal of Dentistry 34: 195-206.
14. Fennis, W.M.M., Kuijs, R.H., Kreulen, C.M., Ver-donschot, N. & Creugers, N.H. (2004) Fatigue resistance of teeth restored with cuspal-coverage composite restorations. The International Journal of Prosthodontics 17: 313-317.
15. Ferrario, V.F., Sforza, C., Serrao, G., Dellavia, C. & Tartaglia, G.M. (2004) Single tooth bite forces in healthy young adults. The Journal of Oral Rehabilitation 31: 18-22.
16. Garvie, R.C., Hannink, R.C. & Pascoe, R.T. (1975) Ceramic steel? Nature 258: 703-704.
17. Geng, J.P., Tan, K.B. & Liu, G.R. (2001) Application of finite element analysis in implant dentistry: a review of the literature. The Journal of Prosthetic Dentistry 85: 585-598.
18. Glauser, R., Sailer, I., Wohlwend, A., Studer, S., Schibli, M. & Schärer, P. (2004) Experimental zirconia abutments for implant-supported single-tooth restorations in esthetically demanding regions: 4-year results of a prospective clinical study. The International Journal of Prosthodontics 17: 285-290.
19. Gracis, S.E., Nicholls, J.I., Chalupnik, J.D. & Yuodelis, R.A. (1991) Shock-absorbing behavior of five restorative materials used on implants. The International Journal of Prosthodontics 4: 282-291.
20. Haas, R., Mensdorff-Pouilly, N., Mailath, G. & Watzek, G. (1995) Brånemark single tooth implants: a preliminary report of 76 implants. The Journal of Prosthetic Dentistry 73: 274-279.
21. Haas, R., Polak, C., Fürhauser, R., Mailath-Pokorny, G., Dörtbudak, O. & Watzek, G. (2002) A long-term follow-up of 76 Bränemark single-tooth implants. Clinical Oral Implants Research 13: 38-43.
22. Ishikawa-Nagai, S., Da Silva, J.D., Weber, H.P. & Park, S.E. (2007) Optical phenomenon of peri-implant soft tissue. Part II. Preferred implant neck color to improve soft tissue esthetics. Clinical Oral Implants Research 18: 575-580.
23. Juodzbalys, G., Kubilius, R., Eidukynas, V. & Raustia, A.M. (2005) Stress distribution in bone: single-unit implant prostheses veneered with porcelain or a new composite material. Implant Dentistry 14: 166-175.
24. Kelly, J.R. (1995) Perspectives on strength. Dental Materials 11: 103-110.
25. Kelly, J.R. (1999) Clinically relevant approach to failure testing of all-ceramic restorations. The Journal of Prosthetic Dentistry 81: 652-661.
26. Kim, H.K., Heo, S.J., Koak, J.Y. & Kim, S.K. (2009) In vivo comparison of force development with various materials of implant-supported prostheses. The Journal of Oral Rehabilitation 36: 616-625.
27. Kosmac, T., Oblak, C., Jevnikar, P., Funduk, N. & Marion, L. (1999) The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dental Materials 15: 426-433.
28. Kuijs, R.H., Fennis, W.M., Kreulen, C.M., Roeters, F.J., Verdonschot, N. & Creugers, N.H. (2006) A comparison of fatigue resistance of three materials for cusp-replacing adhesive restorations. The Journal of Dentistry 34: 19-25.
29. Kunzelmann, K.H., Jelen, B., Mehl, A. & Hickel, R. (2001) Wear evaluation of MZ100 compared to ceramic CAD/CAM materials. International Journal of Computerized Dentistry 4: 171-184.
30. Magne, P. & Belser, U.C. (2002) Bonded Porcelain Restorations in the Anterior Dentition: A Biomimetic Approach. Berlin, Germany: Quintessence Publishing.
31. Magne, P. & Cascione, D. (2006) Influence of post-etching cleaning and connecting porcelain on the microtensile bond strength of composite resin to feldspathic porcelain. The Journal of Prosthetic Dentistry 96: 354-361.
32. Magne, P. & Knezevic, A. (2009a) Influence of overlay restorative materials and load cusps on the fatigue resistance of endodontically treated molars. Quintessence International 40: 729-737.
33. Magne, P. & Knezevic, A. (2009b) Simulated fatigue resistance of composite resin versus porcelain CAD/CAM overlay restorations on endodontically treated molars. Quintessence International 40: 125-133.
34. Magne, P. & Knezevic, A. (2009c) Thickness of CAD-CAM composite resin overlays influences fatigue resistance of endodontically treated premolars. Dental Materials 25: 1264-1268.
35. Magne, P., Magne, M. & Jovanovic, S.A. (2008) An esthetic solution for single-implant restorations - type III porcelain veneer bonded to a screw-retained custom abutment: a clinical report. The Journal of Prosthetic Dentistry 99: 2-7.
36. Magne, P., Paranhos, M.P. & Burnett, L.H. Jr (2010a) New zirconia primer improves bond strength of resin-based cements. Dental Materials 26: 345-352.
37. Magne, P., Paranhos, M.P., Burnett, L.H. Jr, Belser, U.C. & Magne, M. (2010b) Fatigue resistance and failure mode of novel-design anterior single-tooth implant restorations: influence of material selection for type III veneers bonded to zirconia abutments. Clinical Oral Implant Research, doi: DOI: 10.1111/j.1600-0501.2010.02012.x.
38. Magne, P., Perroud, R., Hodges, J.S. & Belser, U.C. (2000) Clinical performance of novel-design porcelain veneers for the recovery of coronal volume and length. The International Journal of Periodontics & Restorative Dentistry 20: 440-457.
39. Magne, P., Schlichting, L.H., Mala, H.P. & Baratieri, L.N. (2010) An in vitro fatigue resistance of CAD/CAM composite resin and ceramic posterior occlusal veneers. The Journal of Prosthetic Dentistry 104: 149-157.
40. Moberg, L.E., Köndell, P.A., Kullman, L., Heimdahl, A. & Gynther, G.W. (1999) Evaluation of single-tooth restorations on ITI dental implants. A prospective study of 29 patients. Clinical Oral Implants Research 10: 45-53.
41. Nakamura, T., Saito, O., Mizuno, M., Kinuta, S. & Ishigaki, S. (2003) Influence of abutment substrates on the color of metal-free polymer crowns. The Journal of Oral Rehabilitation 30: 184-188.
42. Papavasiliou, G., Kamposiora, P., Bayne, S.C. & Felton, D.A. (1996) Three-dimensional finite element analysis of stress-distribution around single tooth implants as a function of bony support, prosthesis type, and loading during function. The Journal of Prosthetic Dentistry 76: 633-640.
43. Park, S.E., Da Silva, J.D., Weber, H.P. & Ishikawa-Nagai, S. (2007) Optical phenomenon of peri-implant soft tissue. Part I. spectrophotometric assessment of natural tooth gingiva and peri-implant mucosa. Clinical Oral Implants Research 18: 569-574.
44. Phark, J.H., Duarte, S. Jr, Blatz, M. & Sadan, A. (2009) An in vitro evaluation of the long-term resin bond to a new densely sintered high-purity zirconium-oxide ceramic surface. The Journal of Prosthetic Dentistry 101: 29-38.
45. Rosentritt, M., Behr, M., Kolbeck, C., Lang, R. & Handel, G. (2000) In vitro repair of all-ceramic and fibre-reinforced composite crowns. The European Journal of Prosthodontics and Restorative Dentistry 8: 107-112.
46. Rubo, J.H. & Souza, E.A. (2008) Finite element analysis of stress in bone adjacent to dental implants. The Journal of Oral Implantology 34: 248-255.
47. Sailer, I., Sailer, T., Stawarczyk, B., Jung, R.E. & Hämmerle, C.H. (2009) In vitro study of the influence of the type of connection on the fracture load of zirconia abutments with internal and external implant-abutment connections. The International Journal of Oral & Maxillofacial Implants 24: 850-858.
48. Searson, L. & Meredith, N. (1997) The role of implants in restorative dentistry: prosthesis design and aesthetic considerations. Dental Update 24: 388-390.
49. Sertgöz, A. (1997) Finite element analysis study of the effect of superstructure material on stress distribution in an implant-supported fixed prosthesis. The International Journal of Prosthodontics 10: 19-27.
50. Skalak, R. (1983) Biomechanical considerations in osseointegrated prostheses. The Journal of Prosthetic Dentistry 49: 843-848.
51. Soumeire, J. & Dejou, J. (1999) Shock absorbability of various restorative materials used on implants. The Journal of Oral Rehabilitation 26: 394-401.
52. Stegaroiu, R., Khraisat, A., Nomura, S. & Miyakawa, O. (2004) Influence of superstructure materials on strain around an implant under 2 loading conditions: a technical investigation. The International Journal of Oral & Maxillofacial Implants 19: 735-742.
53. Stegaroiu, R., Kusakari, H., Nishiyama, S. & Miyakawa, O. (1998) Influence of prosthesis material on stress distribution in bone and implant: a 3-dimensional finite element analysis. The International Journal of Oral & Maxillofacial Implants 13: 781-790.
54. Walls, A.W. (1995) The use of adhesively retained all-porcelain veneers during the management of fractured and worn anterior teeth: part 1. Clinical technique. The British Dental Journal 178: 333-336.
55. Wang, H., Aboushelib, M.N. & Felizer, A.J. (2008) Strength influencing variables on CAD/CAM zirconia frameworks. Dental Materials 24: 633-638.
56. Wang, T.M., Leu, L.J., Wang, J. & Lin, L.D. (2002) Effects of prosthesis materials and prosthesis splinting on peri-implant bone stress around implants in poor-quality bone: a numeric analysis. The International Journal of Oral & Maxillofacial Implants 1: 231-237.
57. Wolfart, M., Lehmann, F., Wolfart, S. & Kern, M. (2007) Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dental Materials 23: 45-50.
58. Yildirim, M., Edelhoff, D., Hanisch, O. & Spiekermann, H. (2000) Ceramic abutments - a new era in achieving optimal esthetics in implant dentistry. The International Journal Periodontics Restorative Dentistry 20: 81-91.