Finite element simulation of high-speed machining of titanium alloy (Ti-6Al-4V) based on ductile failure model

International Journal of Advanced Manufacturing Technology

Volumn 56, Issue 9-12, 2011, Pages 1027-1038

  Chen, Guang ^a   Ren, Chengzu ^a   Yang, Xiaoyong ^a   Jin, Xinmin ^a   Guo, Tao ^a  

^a TIANJIN UNIVERSITY   (China)

Author keywords

Chip morphology; Ductile failure; FEA; High speed machining; Titanium alloy

Indexed keywords

ADIABATIC SHEAR BAND; CHIP MORPHOLOGIES; CUTTING CONDITIONS; CUTTING FORCES; CUTTING SPEED; DUCTILE FAILURES; FAILURE ENERGY; FAILURE PARAMETERS; FE MODEL; FINITE ELEMENT MODELS; FINITE ELEMENT SIMULATIONS; HIGH SPEED CUTTING; HIGH-SPEED MACHINING; JOHNSON-COOK; KEY MODIFICATIONS; MATERIAL MODELS; SIMULATION PROCEDURES; TI-6AL-4V;

ALLOYS; ALUMINUM; COMPUTER SIMULATION; FINITE ELEMENT METHOD; IRON ALLOYS; MACHINING; MORPHOLOGY; SHEAR BANDS; SHEAR FLOW; SPEED; TITANIUM; VANADIUM;

TITANIUM ALLOYS;

EID: 80053565880     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-011-3233-6     Document Type: Article

References (29)

1. EO Ezugwu ZM Wang 1997 Titanium alloys and their machinability-a review J Mater Process Technol 68 262 274 10.1016/S0924-0136(96)00030-1 (Pubitemid 127393463)
2. A Molinari C Musquar G Sutter 2002 Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling Int J Plast 18 443 459 0987.74504 10.1016/S0749-6419(01)00003-1 (Pubitemid 34181544)
3. CH Che-Haron A Jawaid 2005 The effect of machining on surface integrity of titanium alloy Ti-6%Al-4%V J Mater Process Technol 166 188 192 10.1016/j.jmatprotec.2004.08.012 (Pubitemid 41050642)
4. R Komanduri 1982 Some clarifications on the mechanisms of chip formation when machining titanium alloys Wear 76 15 34 10.1016/0043-1648(82)90113-2 (Pubitemid 12524371)
5. A Vyas MC Shaw 1999 Mechanics of saw-tooth chip formation in metal cutting ASME J Manuf Sci Eng 121 163 172 10.1115/1.2831200
6. J Hua R Shivpuri 2004 Prediction of chip morphology and segmentation during the machining of titanium alloys J Mater Process Technol 150 124 133 10.1016/j.jmatprotec.2004.01.028
7. R Komanduri BF Turkovich 1981 New observations on the mechanism of chip formation when machining titanium alloys Wear 69 179 188 10.1016/0043-1648(81) 90242-8
8. A Gente HW Hoffmeister 2001 Chip formation in machining Ti6Al4V at extremely cutting speed Ann CIRP 50 49 52 10.1016/S0007-8506(07)62068-X (Pubitemid 32610775)
9. R Komanduri ZB Hou 2002 On thermoplastic shear instability in the machining of a titanium alloy (Ti-6Al-4V) Metall Mater Trans A 33 A 2995 3010 10.1007/s11661-002-0284-1 (Pubitemid 35236725)
10. M Bäker J Rösler C Siemers 2002 A finite element model of high speed metal cutting with adiabatic shearing Comput Struct 80 495 513 10.1016/S0045-7949(02)00023-8 (Pubitemid 34284529)
11. Li L, He N (2006) A FEA study on mechanisms of saw-tooth chip deformation in high speed cutting of Ti-6Al-4V alloy, in: fifth International Conference on High Speed Machining (HSM). Metz, France, pp 759-767
12. D Umbrello 2008 Finite element simulation of conventional and high speed machining of Ti6Al4V alloy J Mater Process Technol 196 79 87 10.1016/j.jmatprotec.2007.05.007 (Pubitemid 350192180)
13. M Calamaz D Coupard F Girot 2008 A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V Int J Mach Tools Manuf 48 275 288 10.1016/j.ijmachtools.2007.10.014
14. J Barry G Byrne D Lennon 2001 Observations on chip formation and acoustic emission in machining Ti-6Al-4V alloy Int J Mach Tools Manuf 41 1055 1070 10.1016/S0890-6955(00)00096-1 (Pubitemid 32272842)
15. T Özel E Zeren 2007 Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining Int J Adv Manuf Technol 35 255 267 10.1007/s00170-006-0720-2
16. Liu S (2007) FEM simulation and experiment research of cutting temperature and force in orthogonal cutting of titanium alloys (in Chinese). Dissertation, Nanjing University of Aeronautics and Astronautics, Nanjing
17. S Subbiah SN Melkote 2008 Effect of finite edge radius on ductile fracture ahead of the cutting tool edge in micro-cutting of Al2024-T3 Mater Sci Eng A 474 283 300 10.1016/j.msea.2007.04.116
18. S Subbiah SN Melkote 2007 Evidence of ductile tearing ahead of the cutting tool and modeling the energy consumed in material separation in micro-cutting ASME J Eng Mater Technol 129 321 331 10.1115/1.2712471 (Pubitemid 46869444)
19. DRJ Owen JM Vaz 1999 Computational techniques applied to high-speed machining under adiabatic strain localization conditions Comput Methods Appl Mech Eng 171 445 461 0937.74068 10.1016/S0045-7825(98)00220-5
20. T Obikawa E Usui 1996 Computational machining of titanium alloy-finite element method and a few results ASME J Manuf Sci Eng 118 208 215 10.1115/1.2831013
21. J Sun YB Guo 2009 Material flow stress and failure in multiscale machining titanium alloy Ti-6Al-4V Int J Adv Manuf Technol 41 651 659 10.1007/s00170-008-1521-6
22. Abaqus Inc (2006) Analysis user's manual. Version 6.6 USA
23. R Ambati H Yuan 2010 FEM mesh-dependence in cutting process simulations Int J Adv Manuf Technol 10.1007/s00170-010-2818-9
24. T Mabrouki F Girardin M Asad JF Rigal 2008 Numerical and experimental study of dry cutting for an aeronautic aluminium alloy Int J Mach Tools Manuf 48 1187 1197 10.1016/j.ijmachtools.2008.03.013
25. H Ghadbeigi SR Bradbury C Pinna JR Yates 2008 Determination of micro-scale plastic strain caused by orthogonal cutting Int J Mach Tools Manuf 48 228 235 10.1016/j.ijmachtools.2007.08.017 (Pubitemid 350016770)
26. Editorial committee of China Aeronautical Materials Handbook (2001) China aeronautical materials handbook vol.4: titanium alloy & copper alloy, 2nd edn. Stand Press China, Beijing, pp 104-107, (in Chinese)
27. H Schulz E Abele A Sahm 2001 Material aspects of chip formation in HSC machining Ann CIRP 50 45 48 10.1016/S0007-8506(07)62067-8 (Pubitemid 32610774)
28. GS Su ZQ Liu 2010 An experimental study on influences of material brittleness on chip morphology Int J Adv Manuf Technol 51 87 92 10.1007/s00170-010-2619-1
29. SI Jaffery PT Mativenga 2009 Assessment of the machinability of Ti-6Al-4V alloy using the wear map approach Int J Adv Manuf Technol 40 687 696 10.1007/s00170-008-1393-9