Finite element simulation of conventional and high speed machining of Ti6Al4V alloy

Journal of Materials Processing Technology

Volumn 196, Issue 1-3, 2008, Pages 79-87

  Umbrello, Domenico ^a  

^a UNIVERSITY OF CALABRIA   (Italy)

Author keywords

Chip morphology; FEM; High speed machining (HSM); Titanium alloy

Indexed keywords

COMPUTER SIMULATION; FINITE ELEMENT METHOD; MORPHOLOGY; THERMAL CONDUCTIVITY; WEAR OF MATERIALS;

CHIP MORPHOLOGY; HIGH SPEED MACHINING (HSM); PRINCIPAL CUTTING FORCE;

TITANIUM ALLOYS;

EID: 36549046509     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2007.05.007     Document Type: Article

References (39)

1. Astakhov V.P. Metal Cutting Mechanics (1999), CRC Press p. 297
2. Astakhov V.P., and Outeiro J.C. Modeling of the contact stress distribution at the tool-chip interface. Mach. Sci. Technol. 9 (2005) 85-99
3. Astakhov V.P., and Shvets S. The assessment of plastic deformation in metal cutting. J. Mater. Process. Technol. 146 (2004) 193-202
4. Borradile J.B., and Jeal R.H. Titanium Titanium Alloys 1-3 (1982)
5. Chandrasekaran H., M'Saoubi R., and Chazal H. Modelling of material flow stress in chip formation process from orthogonal milling and split Hopkinson bar tests. Mach. Sci. Technol. 9 (2005) 131-145
6. Che-Haron C.H. Tool life and surface integrity in turning titanium alloy. J. Mater. Process. Technol. 118 (2001) 231-237
7. Che-Haron C.H., and Jawaid A. The effect of machining on surface integrity of titanium alloy Ti-6% Al-4% V. J. Mater. Process. Technol. 166 (2005) 188-192
8. Childs T.H.C. Material property needs in modelling metal machining. Proceedings of the CIRP International Workshop on Modeling of Machining Operations. Atlanta, Georgia, 19 May (1998) 193-202
9. Childs T.H.C., Maekawa K., Obinakawa T., and Yamane Y. Metal Machining-Theory and Applications (2000), Elsevier Ltd. p. 408
10. Cockroft M.G., and Latham D.J. Ductility and workability of metals. J. Inst. Met. 96 (1968) 33-39
11. Davies M.A., and Burns T.J. Thermomechanical oscillations in material flow during high-speed machining. Phil. Trans. R. Soc. Lond. A 359 (2001) 821-846
12. Deform™-User Manual, 2006. SFTC-Deform V9.0.1, Scientific Forming Technologies Corporation Ed., Columbus, OH, USA.
13. Dumitrescu M., Elbestawi M.A., and El-Wardany T.I. Mist Coolant Applications in High Speed Machining of Advanced Materials Metal Cutting and High Speed Machining (2002), Kluwer Academic/Plenum Publishers pp. 329-339
14. Filice L., Micari F., Pagnotta L., and Umbrello D. Pressure distribution on the tool in cutting: prediction and measurement. Int. J. Form. Process. 6 (2003) 327-341 (Hermes Science)
15. Filice L., Umbrello D., Beccari S., and Micari F. On the FE codes capability for tool temperature calculation in machining processes. J. Mater. Process. Technol. 174 1-3 (2006) 286-292
16. Filice L., Micari F., Rizzuti S., and Umbrello D. A critical analysis on the friction modelling in orthogonal machining. Int. J. Mach. Tools Manuf. 47 3/4 (2007) 709-714
17. Filice L., Micari F., Rizzuti S., Settineri L., and Umbrello D. Thermal aspects in Finite Element simulation of orthogonal cutting process. J. Mater. Process. Technol. 189 1-3 (2007) 284-291
18. Gente A., and Hoffmeister H.W. Chip formation in machining Ti6Al4V at extremely cutting speed. Ann. CIRP 50 1 (2001) 49-52
19. Gocmen A., Sartkulvanich P., and Altan T. Effects of flow stress and friction models in finite element simulation of orthogonal cutting a sensitivity analysis. Mach. Sci. Technol. 9 (2005) 1-26
20. Hua J., and Shivpuri R. Prediction of chip morphology and segmentation during the machining of titanium alloys. J. Mater. Process. Technol. 150 (2004) 124-133
21. Johnson G.R., and Cook W.H. A constitutive model and data for metals subjected to large strains, high strain rate, and temperatures. Proceedings of the International Symposium on Ballistics. The Hague, The Netherlands (1983) 1-7
22. Kobayashi S., Oh S.K., and Altan T. Metal Forming and The Finite-Element Method (1989), Oxford University Press, Inc
23. Komanduri R., Schroeder T.A., Bandhopadhyay D.K., and Hazra J. In: Hasson D.F., and Hamilton C.H. (Eds). Titanium: A Model Material for Analysis of the High-speed Machining Process, Advanced Processing Methods for Titanium (1982), The Metallurgical Society of ASME 241-256
24. Lee D. The effect of cutting speed on chip formation under orthogonal machining. J. Eng. Ind., Trans. ASME 107 1 (1985) 55-63
25. Lee W.S., and Lin C.F. High-temperature deformation behavior of Ti6Al4V alloy evaluated by high strain-rate compression tests. J. Mater. Process. Technol. 75 (1998) 127-136
26. Meyer Jr. H.W., and Kleponis D.S. An analysis of parameters for the Johnson-Cook model for 2-inch thick rolled homogeneous armor. In: Chinni M.J. (Ed). 1998 Advanced Simulation Technologies Conference, Military, Government and Aerospace Simulation Series, vol. 30, no. 4. April (1998)
27. Meyers M.A., Chen Y.J., Marquis F.D.S., and Kim D.S. High-strain, high strain-rate behavior of tantalum. Metall. Mater. Trans. A 26A (1995) 2493-2501
28. Myers J.R., Bomberger H.B., and Froes F.H. Corrosion behavior and use of titanium and its alloys. J. Met. 36 10 (1984) 50-60
29. Nakayama K., Arai M., and Kanda T. Machining characteristics of hard materials. Ann. CIRP 37 1 (1998) 89-92
30. Poulachon G., and Moisan A.L. Hard turning: chip formation mechanisms and metallurgical aspects. ASME J. Manuf. Sci. Eng. 122 (2000) 407-412
31. Shaw M.C. Metal Cutting Principles. 2nd ed. (2005), Oxford Science Publications p. 651
32. Shaw M.C., and Vyzas A. Chip formation in the machining of hardened steel. Ann. CIRP 42 1 (1993) 29-33
33. Trent E.M., and Wrigth P.K. Metal Cutting. 4th ed. (2000), B-Heinemann p. 434
34. van Kann H. Titanium and Titanium Alloys vol. 1 (1982), Plenum Press, NY, USA pp. 229-234
35. Vural M., Rittel D., and Ravichandran G. Large strain mechanical behavior of 1018 cold-rolled steel over wide range of strain rates. Met. Mater. Trans. A 33A (2003) 2873-2885
36. Wang Y., Zhou Y., and Xia Y. A constitutive description of tensile behavior for brass over a wide range of strain rates. Mater. Sci. Eng. A 372 (2004) 186-190
37. Weerasooriya, T., 2000. Unpublished Data.
38. Wood R.A., and Favor R.J. Titanium Alloys Handbook (1972), Air Force Materials Laboratory, Wright-Patterson Air Force Base, OH, USA
39. Zoya Z.A., and Krishnamurthy R. The performance of CBN tools in the machining of titanium alloys. J. Mater. Process. Technol. 100 (2000) 80-86