메뉴 건너뛰기




Volumn 129, Issue 2, 2007, Pages 321-331

Evidence of ductile tearing ahead of the cutting tool and modeling the energy consumed in material separation in micro-cutting

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; CUTTING; DUCTILE FRACTURE; ENERGY UTILIZATION; FINITE ELEMENT METHOD; SCANNING ELECTRON MICROSCOPY;

EID: 34249894503     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2712471     Document Type: Article
Times cited : (39)

References (44)
  • 1
    • 34249865765 scopus 로고    scopus 로고
    • The Size Effect in Metal Cutting
    • Shaw, M. C, 2003, "The Size Effect in Metal Cutting," Sadhana: Proc, Indian Acad. Sci., 25(5), pp. 875-896.
    • (2003) Sadhana: Proc, Indian Acad. Sci , vol.25 , Issue.5 , pp. 875-896
    • Shaw, M.C.1
  • 2
    • 33746867149 scopus 로고    scopus 로고
    • Material Strengthening Mechanisms and Their Contribution to Size Effect in Micro-cutting
    • Liu, K., and Melkote, S. N., 2006, "Material Strengthening Mechanisms and Their Contribution to Size Effect in Micro-cutting," J. Manuf. Sci. Eng., 128(3), pp. 730-738.
    • (2006) J. Manuf. Sci. Eng , vol.128 , Issue.3 , pp. 730-738
    • Liu, K.1    Melkote, S.N.2
  • 3
    • 0012964492 scopus 로고
    • A Quantized Theory of Strain Hardening as Applied to Cutting of Metals
    • Shaw, M. C, 1950, "A Quantized Theory of Strain Hardening as Applied to Cutting of Metals," J. Appl. Phys., 21, pp. 599-606.
    • (1950) J. Appl. Phys , vol.21 , pp. 599-606
    • Shaw, M.C.1
  • 6
    • 0242442457 scopus 로고    scopus 로고
    • An Intrinsic Size-Effect in Machining due to the Strain Gradient
    • New York, November 11-16, pp
    • Dinesh, D., Swaminathan, S., Chandrasekhar, S., and Farris, T. N., 2001, "An Intrinsic Size-Effect in Machining due to the Strain Gradient," Proceedings ASME IMECE, New York, November 11-16, pp. 197-204.
    • (2001) Proceedings ASME IMECE , pp. 197-204
    • Dinesh, D.1    Swaminathan, S.2    Chandrasekhar, S.3    Farris, T.N.4
  • 7
    • 0027245265 scopus 로고
    • Effect of Tool Edge Geometry on Energy Dissipation in Ultraprecision Machining
    • Lucca, D. A., Rhorer, R. L., and Komanduri, R., 1993, "Effect of Tool Edge Geometry on Energy Dissipation in Ultraprecision Machining," CIRP Ann., 2(1), pp. 83-86.
    • (1993) CIRP Ann , vol.2 , Issue.1 , pp. 83-86
    • Lucca, D.A.1    Rhorer, R.L.2    Komanduri, R.3
  • 8
    • 0032483165 scopus 로고    scopus 로고
    • Effect of Tool Geometry in Nanometric Cutting: A Molecular Dynamics Simulation Approach
    • Komanduri, R., Chandrasekaran, N., and Raff, L. M., 1998, "Effect of Tool Geometry in Nanometric Cutting: A Molecular Dynamics Simulation Approach," Wear, 219, pp. 84-97.
    • (1998) Wear , vol.219 , pp. 84-97
    • Komanduri, R.1    Chandrasekaran, N.2    Raff, L.M.3
  • 9
    • 0036700933 scopus 로고    scopus 로고
    • Application of an Internally Consistent Material Model to Determine the Effect of Tool Edge Geometry in Orthogonal Machining
    • Schimmel, R. J., Endres. W. J., and Stevenson, R., 2002, "Application of an Internally Consistent Material Model to Determine the Effect of Tool Edge Geometry in Orthogonal Machining," ASME J. Manuf. Sci. Eng., 124, pp. 536-543.
    • (2002) ASME J. Manuf. Sci. Eng , vol.124 , pp. 536-543
    • Schimmel, R.J.1    Endres, W.J.2    Stevenson, R.3
  • 10
    • 85023335444 scopus 로고
    • Size Effect in Metal-Cutting Force
    • Nakayama, K., and Tamura, K., 1968, "Size Effect in Metal-Cutting Force," ASME J. Eng. Ind., 90, pp. 119-126.
    • (1968) ASME J. Eng. Ind , vol.90 , pp. 119-126
    • Nakayama, K.1    Tamura, K.2
  • 11
    • 0038176862 scopus 로고    scopus 로고
    • Modelling Metal Cutting Using Modern Ductile Fracture Mechanics: Quantitative Explanations for Some Longstanding Problems
    • Atkins, A. G., 2003, "Modelling Metal Cutting Using Modern Ductile Fracture Mechanics: Quantitative Explanations for Some Longstanding Problems," Int. J. Mech. Sci., 45, pp. 373-396.
    • (2003) Int. J. Mech. Sci , vol.45 , pp. 373-396
    • Atkins, A.G.1
  • 13
  • 14
    • 0344560087 scopus 로고
    • The Formation of Microcracks in Machining a Low Carbon Steel
    • Metals and Materials, London
    • Komanduri, R., and Brown, R. H., 1972, "The Formation of Microcracks in Machining a Low Carbon Steel," Metals and Materials, Bulletin of the Institute of Metals, London, 6, pp. 531-533.
    • (1972) Bulletin of the Institute of Metals , vol.6 , pp. 531-533
    • Komanduri, R.1    Brown, R.H.2
  • 15
    • 0017266684 scopus 로고
    • The Significance of Dynamic Crack Behavior in Chip Formation
    • Iwata, K., and Ueda, K., 1976, "The Significance of Dynamic Crack Behavior in Chip Formation," CIRP Ann., 25(1), pp. 65-70.
    • (1976) CIRP Ann , vol.25 , Issue.1 , pp. 65-70
    • Iwata, K.1    Ueda, K.2
  • 16
    • 33746864122 scopus 로고    scopus 로고
    • The Constant Force Component due to Material Separation and its Contribution to the Size-Effect in Specific Cutting Energy
    • Subbiah, S., and Melkote, S. N., 2006, "The Constant Force Component due to Material Separation and its Contribution to the Size-Effect in Specific Cutting Energy," ASME J. Manuf. Sci. Eng., 128(2), pp. 811-815.
    • (2006) ASME J. Manuf. Sci. Eng , vol.128 , Issue.2 , pp. 811-815
    • Subbiah, S.1    Melkote, S.N.2
  • 17
    • 0029408920 scopus 로고
    • Modeling and Simulation of High Speed Machining
    • Marusich, T. D., and Ortiz, M., 1995, "Modeling and Simulation of High Speed Machining," Int. J. Numer. Methods Eng., 21, pp. 3675-3694.
    • (1995) Int. J. Numer. Methods Eng , vol.21 , pp. 3675-3694
    • Marusich, T.D.1    Ortiz, M.2
  • 18
    • 0342592525 scopus 로고    scopus 로고
    • Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High Speed Cutting
    • Ozel, T., and Altan, T., 2000, "Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High Speed Cutting," Int. J. Mach. Tools Manuf., 40, pp. 133-152.
    • (2000) Int. J. Mach. Tools Manuf , vol.40 , pp. 133-152
    • Ozel, T.1    Altan, T.2
  • 19
    • 33746919849 scopus 로고    scopus 로고
    • Process Modeling of Micro-cutting Including Strain Gradient Effects,
    • Ph.D. thesis, Georgia Institute of Technology, Atlanta, CA
    • Liu, K., 2005, "Process Modeling of Micro-cutting Including Strain Gradient Effects," Ph.D. thesis, Georgia Institute of Technology, Atlanta, CA.
    • (2005)
    • Liu, K.1
  • 20
    • 0028480178 scopus 로고
    • Finite Element Simulation of Chip Formation and Comparison with Machining Experiment
    • Zhang, B., and Bagchi, A., 1994, "Finite Element Simulation of Chip Formation and Comparison with Machining Experiment," J. Eng. Ind., 116, pp. 289-297.
    • (1994) J. Eng. Ind , vol.116 , pp. 289-297
    • Zhang, B.1    Bagchi, A.2
  • 21
    • 0026851240 scopus 로고
    • A Coupled Finite Element Model of Thermo-Elastic-Plastic Large Deformation for Orthogonal Cutting
    • Lin, Z. C., and Lin, S. Y., 1992, "A Coupled Finite Element Model of Thermo-Elastic-Plastic Large Deformation for Orthogonal Cutting," J. Eng. Mater. Technol., 114, pp. 218-226.
    • (1992) J. Eng. Mater. Technol , vol.114 , pp. 218-226
    • Lin, Z.C.1    Lin, S.Y.2
  • 22
    • 0022160698 scopus 로고
    • A Finite Element Model of Orthogonal Metal Cutting
    • Strenkowski. J. S., and Carroll, J. T., 1985, "A Finite Element Model of Orthogonal Metal Cutting," J. Eng. Ind., 107, pp. 349-354.
    • (1985) J. Eng. Ind , vol.107 , pp. 349-354
    • Strenkowski, J.S.1    Carroll, J.T.2
  • 23
    • 0030288645 scopus 로고    scopus 로고
    • An Evaluation of Chip Separation Criteria for the FEM Simulation of Machining
    • Huang, J. M., and Black, J. T., 1996, "An Evaluation of Chip Separation Criteria for the FEM Simulation of Machining," J. Manuf. Sci. Eng., 118, pp. 545-554.
    • (1996) J. Manuf. Sci. Eng , vol.118 , pp. 545-554
    • Huang, J.M.1    Black, J.T.2
  • 24
    • 10044274099 scopus 로고    scopus 로고
    • Finite Element Modeling of Machining of 1020 Steel Including Effects of Round Edge
    • Tian, Y., and Shin, Y. C., 2004, "Finite Element Modeling of Machining of 1020 Steel Including Effects of Round Edge," Trans. NAMRI/SME, 32, pp. 111-118.
    • (2004) Trans. NAMRI/SME , vol.32 , pp. 111-118
    • Tian, Y.1    Shin, Y.C.2
  • 25
    • 0021412061 scopus 로고
    • Process Modeling of Orthogonal Cutting by Rigid-Plastic Finite Element Method
    • Iwata, K., Osakada, K., and Terasaka, Y., 1984, "Process Modeling of Orthogonal Cutting by Rigid-Plastic Finite Element Method," ASME J. Eng. Mater. Technol., 106, pp. 132-138.
    • (1984) ASME J. Eng. Mater. Technol , vol.106 , pp. 132-138
    • Iwata, K.1    Osakada, K.2    Terasaka, Y.3
  • 26
    • 0030147055 scopus 로고    scopus 로고
    • Computational Machining of Titanium Alloy-Finite Element Modeling and a Few Results
    • Obikawa, T., and Usui, E., 1996, "Computational Machining of Titanium Alloy-Finite Element Modeling and a Few Results," ASME J. Manuf. Sci. Eng., 118, pp. 208-215.
    • (1996) ASME J. Manuf. Sci. Eng , vol.118 , pp. 208-215
    • Obikawa, T.1    Usui, E.2
  • 27
    • 0031271487 scopus 로고    scopus 로고
    • An Application of Computational Machining Method to Discontinuous Chip Formation
    • Obikawa, T., Sasahara, S., Shirakashi, T., and Usui, E., 1997, "An Application of Computational Machining Method to Discontinuous Chip Formation," ASME J. Manuf. Sci. Eng., 119, pp. 667-674.
    • (1997) ASME J. Manuf. Sci. Eng , vol.119 , pp. 667-674
    • Obikawa, T.1    Sasahara, S.2    Shirakashi, T.3    Usui, E.4
  • 28
    • 0030837860 scopus 로고    scopus 로고
    • A Mixture Theory for Contact in Multi-material Eulerian Formulation
    • Benson, D. J., 1997, "A Mixture Theory for Contact in Multi-material Eulerian Formulation," Comput. Methods Appl. Mech. Eng., 140, pp. 59-86.
    • (1997) Comput. Methods Appl. Mech. Eng , vol.140 , pp. 59-86
    • Benson, D.J.1
  • 30
    • 10044285242 scopus 로고    scopus 로고
    • A FEM Study on Mechanisms of Discontinuous Chip Formation in Hard Machining
    • Guo, Y. B., and Yen, D. W., 2004, "A FEM Study on Mechanisms of Discontinuous Chip Formation in Hard Machining," J. Mater. Process. Technol., 155-156, pp. 1350-1356.
    • (2004) J. Mater. Process. Technol , vol.155-156 , pp. 1350-1356
    • Guo, Y.B.1    Yen, D.W.2
  • 32
    • 30844446284 scopus 로고    scopus 로고
    • Prediction of Serrated Chip Formation in Metal Cutting Process with New Flow Stress Model for AISI 1045 Steel
    • Rhim, S., and Oh, S., 2006, "Prediction of Serrated Chip Formation in Metal Cutting Process with New Flow Stress Model for AISI 1045 Steel," J. Mater. Process. Technol., 171, pp. 417-422.
    • (2006) J. Mater. Process. Technol , vol.171 , pp. 417-422
    • Rhim, S.1    Oh, S.2
  • 33
    • 0035385846 scopus 로고    scopus 로고
    • Micro-structural Analysis of Chip Formation during Orthogonal Machining of Al/SiCp Composites
    • Joshi, S. S., Ramakrishnan, N., and Ramakrishnan, P., 2001, "Micro-structural Analysis of Chip Formation during Orthogonal Machining of Al/SiCp Composites," J. Eng. Mater. Technol., 123, pp. 315-321.
    • (2001) J. Eng. Mater. Technol , vol.123 , pp. 315-321
    • Joshi, S.S.1    Ramakrishnan, N.2    Ramakrishnan, P.3
  • 34
    • 0002913323 scopus 로고
    • A New Explanation of the Phenomenon of Chip Curling During Machining
    • Ponkshe, G. R., 1967, "A New Explanation of the Phenomenon of Chip Curling During Machining," J. Eng. Ind., 89, pp. 376-379.
    • (1967) J. Eng. Ind , vol.89 , pp. 376-379
    • Ponkshe, G.R.1
  • 35
    • 0019527840 scopus 로고
    • The Hammer QSD-Quick Stop Device for High Speed Machining and Rubbing
    • Black, J. T., and James, C. R., 1981, "The Hammer QSD-Quick Stop Device for High Speed Machining and Rubbing," J. Eng. Ind., 103, pp. 13-21.
    • (1981) J. Eng. Ind , vol.103 , pp. 13-21
    • Black, J.T.1    James, C.R.2
  • 37
    • 34249904508 scopus 로고    scopus 로고
    • Effect of Finite Edge Radius on Ductile Fracture Ahead of the Cutting Tool Edge in Micro-cutting of A12024-T3
    • submitted
    • Subbiah, S., and Melkote, S. N., 2006, "Effect of Finite Edge Radius on Ductile Fracture Ahead of the Cutting Tool Edge in Micro-cutting of A12024-T3," Mater. Sci. Eng., A, submitted.
    • (2006) Mater. Sci. Eng., A
    • Subbiah, S.1    Melkote, S.N.2
  • 38
    • 0037757645 scopus 로고    scopus 로고
    • Experimental Investigations of Material Models for Ti-6AL-4V Titanium and 2024-T3 Aluminum
    • Technical Report No. DOT/FAA/ AR-00/25, U. S. Department of Transportation Federal Aviation Administration, Washington, D.C
    • Lesuer, D. R., 2000, "Experimental Investigations of Material Models for Ti-6AL-4V Titanium and 2024-T3 Aluminum," Technical Report No. DOT/FAA/ AR-00/25, U. S. Department of Transportation Federal Aviation Administration, Washington, D.C.
    • (2000)
    • Lesuer, D.R.1
  • 39
    • 18444368542 scopus 로고    scopus 로고
    • Failure Modeling of Titanium Ti-6AL-4V and Aluminum 2024-T3 with the Johnson-Cook Material Model
    • Technical Report No. DOT/ FAA/AR-00/25, U. S. Department of Transportation Federal Aviation Administration, Washington, D.C
    • Kay, G., 2003, "Failure Modeling of Titanium Ti-6AL-4V and Aluminum 2024-T3 with the Johnson-Cook Material Model," Technical Report No. DOT/ FAA/AR-00/25, U. S. Department of Transportation Federal Aviation Administration, Washington, D.C.
    • (2003)
    • Kay, G.1
  • 40
    • 4544276132 scopus 로고    scopus 로고
    • A Comparative Study on Various Ductile Crack Formation Criteria
    • Bao, Y., and Wierzbicki, T., 2004, "A Comparative Study on Various Ductile Crack Formation Criteria," ASME J. Eng. Mater. Technol., 126, pp. 314-324.
    • (2004) ASME J. Eng. Mater. Technol , vol.126 , pp. 314-324
    • Bao, Y.1    Wierzbicki, T.2
  • 41
    • 17844389623 scopus 로고    scopus 로고
    • Calibration and Evaluation of Seven Fracture Models
    • Wierzbicki, T., Bao, Y, Lee, Y.-W., and Bai, Y., 2005, "Calibration and Evaluation of Seven Fracture Models," Int. J. Mech. Sci., 47, pp. 719-743.
    • (2005) Int. J. Mech. Sci , vol.47 , pp. 719-743
    • Wierzbicki, T.1    Bao, Y.2    Lee, Y.-W.3    Bai, Y.4
  • 42
    • 0021787534 scopus 로고
    • Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures
    • Johnson, G. R., and Cook, W. H., 1985, "Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures," Eng. Fract. Mech., 21(1), pp. 31-49.
    • (1985) Eng. Fract. Mech , vol.21 , Issue.1 , pp. 31-49
    • Johnson, G.R.1    Cook, W.H.2
  • 43
    • 0002897545 scopus 로고
    • Interrelationship Between Shear Processes Occurring Along Tool Face and on Shear Plane in Metal Cutting
    • ASME, pp
    • Zorev, N. N., 1963, "Interrelationship Between Shear Processes Occurring Along Tool Face and on Shear Plane in Metal Cutting," Proceedings of the International Production Engineering Research Conference, ASME, pp. 42-49.
    • (1963) Proceedings of the International Production Engineering Research Conference , pp. 42-49
    • Zorev, N.N.1
  • 44
    • 0000267903 scopus 로고
    • The Work Necessary to Form a Ductile Fracture Surface
    • Stuwe, H. P., 1980, "The Work Necessary to Form a Ductile Fracture Surface," Eng. Fract. Mech., 13(2), pp. 231-236.
    • (1980) Eng. Fract. Mech , vol.13 , Issue.2 , pp. 231-236
    • Stuwe, H.P.1


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.