Experimental study and modelling of tool temperature distribution in orthogonal cutting of AISI 316L and AISI 3115 steels

International Journal of Advanced Manufacturing Technology

Volumn 56, Issue 9-12, 2011, Pages 865-877

  M'Saoubi, Rachid ^a   Chandrasekaran, Hariharan ^b  

^a SECO TOOLS AB   (Sweden)

^b SWEREA KIMAB   (Sweden)

Author keywords

Modelling; Orthogonal cutting; Steel; Tool temperature

Indexed keywords

ANALYTICAL MODEL; CALCIUM TREATMENT; EXPERIMENTAL STUDIES; FRICTIONAL HEAT; HIGH SULPHUR; MODELLING; ORTHOGONAL CUTTING; STAINLESS STEEL 316L; STAINLESS STEEL AISI 316L; TOOL STRESS; WORK MATERIAL;

CARBON STEEL; CUTTING TOOLS; MATHEMATICAL MODELS; METAL WORKING TOOLS; STAINLESS STEEL; STRESS CONCENTRATION; SULFUR; TEMPERATURE DISTRIBUTION; THERMOANALYSIS;

EQUIPMENT;

EID: 80053561364     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-011-3257-y     Document Type: Article

References (32)

1. MA Davies T Ueda R M'Saoubi B Mullany AL Cooke 2007 On the measurement of temperature in material removal processes CIRP Annals-Manufacturing Technology 56 2 581 604 10.1016/j.cirp.2007.10.009 (Pubitemid 350122465)
2. W Grzesik 1999 Experimental investigation of the cutting temperature when turning with coated indexable inserts Int J Mach Tools Manuf 39 355 369 10.1016/S0890-6955(98)00044-3
3. R M'Saoubi JL Lebrun B Changeux 1998 A new method for cutting tool temperature measurement using CCD infrared technique-influence of tool and coating Mach Sci Technol 2 2 369 382 10.1080/10940349808945677 (Pubitemid 128492512)
4. R M'Saoubi C Le Calvez B Changeux JL Lebrun 2002 Thermal and microstructural analysis of orthogonal cutting of a low alloyed carbon steel using an infrared-charge-coupled device camera technique Proc Inst Mech Eng B, J Eng Manuf 216 B2 153 165 10.1243/0954405021519807 (Pubitemid 34300710)
5. R M'Saoubi H Chandrasekaran 2004 Investigation of the effects of tool micro-geometry and coating on tool temperature during orthogonal turning of quenched and tempered steel Int J Mach Tools Manuf 44 2-3 213 224 10.1016/j.ijmachtools.2003.10.006
6. JC Outeiro AM Dias JL Lebrun 2004 Experimental assessment of temperature distribution in three dimensional cutting process Mach Sci Technol 8 3 357 376 10.1081/MST-200038984
7. G Sutter L Faure A Molinari N Ranc V Pina 2003 An experimental technique for the measurement of temperature fields for the orthogonal cutting in high speed machining Int J Mach Tools & Man 43 7 671 678 10.1016/S0890-6955(03) 00037-3
8. MA Davies H Yoon TL Schmitz TJ Burns MD Kennedy 2003 Calibrated thermal microscopy of the tool-chip interface in machining Mach Sci Technol 7 2 167 190 10.1081/MST-120022776
9. YK Potdar AT Zehnder 2003 Measurements and simulations of temperature and deformation fields in transient metal cutting J Manuf Sci Eng 126 645 655 10.1115/1.1596571
10. YK Potdar Zehnder 2004 Temperature and deformation measurements in transient metal cutting Exp Mech 44 1 1 9 10.1007/BF02427969 (Pubitemid 38259228)
11. MR Miller G Mulholland C Anderson 2003 Experimental cutting tool distributions J Manuf Sci Eng 125 4 667 673 10.1115/1.1621425
12. J Hwang S Kompella S Chandrasekar TN Farris 2003 Measurement of temperature field in surface grinding using infra-red (IR) imaging system J Tribol 125 2 377 383 10.1115/1.1537748 (Pubitemid 36615174)
13. Rossi F, Sermet E, Poulachon G, Lebrun JL, Dillon OW, Saito K, Jawahir IS (2001) Numerical and experimental studies on tool temperature distribution in machining with flat-faced and grooved tools. Proceedings of the 4th International ESAFORM Conference on Material Forming, Liège, Belgium, 23-25 April, pp 615-618
14. Wanigarathne D, Troutman A, Kardekar AD, Ee KC, Poulachon G, Dillon OW, Jawahir IS (2004) An experimental study on cutting temperatures and progressive tool wear in orthogonal machining with grooved tools. Proceedings of the 7th CIRP workshop on Modelling of Machining Operations, Cluny, France, 04-05 May, pp 179-186
15. R M'Saoubi H Chandrasekaran 2004 Experimental tool temperature distributions in oblique and orthogonal cutting using chip breaker geometry inserts J Manuf Sci Eng 128 2 606 610 10.1115/1.2162904
16. PJ Arrazola I Arriola MA Davies 2009 Analysis of the influence of tool type, coatings, and machinability on the thermal fields in orthogonal machining of AISI 4140 steels CIRP Annals-Manufacturing Technology 58 1 85 88 10.1016/j.cirp.2009.03.085
17. R Komanduri ZB Hou 2000 Thermal modeling of the metal cutting process. Part I-temperature rise distribution due to shear plane heat source Int J Mech Sci 42 1715 1752 1065.74579 10.1016/S0020-7403(99)00070-3
18. R Komanduri ZB Hou 2001 Thermal modeling of the metal cutting process. Part II-temperature rise distribution due to frictional heat source at the tool-chip interface Int J Mech Sci 43 57 88 1072.74515 10.1016/S0020-7403(99) 00104-6 (Pubitemid 33375908)
19. R Komanduri ZB Hou 2001 Thermal modeling of the metal cutting process. Part III-temperature rise distribution due to the combined effect of shear plane heat source and the tool-chip interface frictional heat source Int J Mech Sci 43 89 107 10.1016/S0020-7403(99)00105-8 (Pubitemid 33375909)
20. H Chandrasekaran A Thuvander 1998 Modeling tool stresses and temperature evaluation in turning using finite element method Mach Sci Technol 2 2 355 367 10.1080/10940349808945676 (Pubitemid 128492511)
21. JA Arsecularatne 1997 On tool-chip interface stress distributions, ploughing force and size effect in machining Int J Mach Tools Manuf 37 7 885 899 10.1016/S0890-6955(97)00001-1 (Pubitemid 127415995)
22. Chandrasekaran H, Thuvander A, Wisell H (1985) Estimation of cutting forces, contact load and elastic stress field in a HSS tool during single tooth peripheral milling. Report from the Swedish Institute for Metals Research, IM Report No. IM-2194
23. Zorev NN (1963) Interrelationship between shear process occurring along tool face and on shear plane in metal cutting. Proceedings of the International Production Engineering Research Council, pp 42-49
24. JC Jaeger 1942 Moving sources of heat and the temperature at sliding contacts J Proc R Soc NSW 76 203 224
25. Blok H (1938) Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions. Proceedings of the General Discussion on Lubrication and Lubricants, Institution of Mechanical Engineers, London, UK, pp 222-235
26. AK Balaji VS Mohan 2002 An effective cutting tool thermal conductivity based model for tool-chip contact in machining with multi-layer coated cutting tools Mach Sci Technol 6 3 415 436 10.1081/MST-120016254
27. IS Jawahir CA Van Luttervelt 1993 Recent developments in chip control research and applications Annals of the CIRP 42 2 659 693 10.1016/S0007-8506(07) 62531-1
28. X Li EM Kopalinski PLB Oxley 1995 A numerical method for determining temperature distributions in machining with coolant-part 1: modelling the process Proc Inst MechEng B, J Eng Manuf 209 B1 33 43 10.1243/PIME-PROC-1995- 209-051-02
29. R M'Saoubi H Chandrasekaran 2005 Innovative methods for the investigation of tool-chip adhesion and layer formation during machining CIRP Annals-Manufacturing Technology 54 1 59 62 10.1016/S0007-8506(07)60049-3 (Pubitemid 40948409)
30. B Mills CS Hao HS Qi 1997 Formation of an adherent layer on a cutting tool studied by micro-machining and finite element analysis Wear 208 61 66 10.1016/S0043-1648(96)07377-2 (Pubitemid 27442349)
31. A Gandarias LN Lopez de Lacalle X Aizpitarte A Lamikiz 2008 Study of the performance of the turning and drilling of austenitic stainless steels using two coolant techniques Int J Mach Mach Mater 3 1/2 1 17 (Pubitemid 351454506)
32. MA Xavior M Adithan 2010 Evaluating the performance of cutting fluids in machining of AISI 304 austenitic stainless steel Int J Mach Mach Mater 7 3/4 244 259