Evaluating the performance of cutting fluids in machining of AISI 304 austenitic stainless steel

International Journal of Machining and Machinability of Materials

Volumn 7, Issue 3-4, 2010, Pages 262-277

  Xavior, M Anthony ^a   Adithan, M ^a  

^a VIT UNIVERSITY   (India)

Author keywords

Coconut oil; Cutting force; Machining; Tool shim interface temperature

Indexed keywords

CARBIDE TOOLS; CUTTING; CUTTING FLUIDS; MACHINING; SHIMS; STATISTICAL TESTS; VEGETABLE OILS;

AISI-304 STAINLESS STEEL; COATED CARBIDE TOOLS; COCONUT OIL; CUTTING FORCES; INTERFACE TEMPERATURES; PROCESS PARAMETERS; SIGNIFICANCE LEVELS; TAGUCHI'S ORTHOGONAL ARRAYS;

AUSTENITIC STAINLESS STEEL;

EID: 77952283561     PISSN: 17485711     EISSN: 1748572X     Source Type: Journal    
DOI: 10.1504/IJMMM.2010.033069     Document Type: Article

References (29)

1. Armarego, E.J.A. and Brown, R.H. (1969) The Machining of Metals, Prentice Hall, Englewood Cliffs, New Jersey, pp.172.
2. Belluco, W. and De Chiffre, L. (2002) 'Surface integrity and part accuracy in reaming and tapping stainless steel with new vegetable based cutting oils', Tribology International, Vol. 35, pp.865-870.
3. Brockhoff, T. and Walter, A. (1998) 'Fluid minimization in cutting and grinding', Abrasives, pp.38-42.
4. Cemal, C.M. and Yahya, I. (2005) 'Detecting tool breakage in turning AISI 1050 steel using coated and uncoated cutting tools', Journal of Materials Processing Technology, Vol. 159, pp.191-198.
5. De Chiffre, L., Lassen, S., Pedersen, K.B. and Skade, S. (1994) 'A reaming test for cutting fluid evaluation', Journal of Synthetic Lubrication, Vol. 11, pp.17-34.
6. har, N.R., Kamruzzaman, M. and Mahiuddin, A. (2006) 'Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI 4340 steel', Journal of Materials Processing Technology, Vol. 172, pp.299-304.
7. Dimla, D.E. Sr (2004) 'The impact of cutting conditions on cutting forces and vibration signals in turning with plane face geometry inserts', Journal of Materials Processing Technology, Vol. 156, pp.1708-1715.
8. EI Baradie, M.A. (1996) 'Cutting fluids. Part I. characterisation', Journal of Materials Processing Technology, Vol. 56, pp.787-797.
9. Herchang, A. and Wen-jei, Y. (1998) 'Heat transfer and life of metal cutting tools in turning, PII:S0017-9310(97)00105-1', International Journal of Heat Mass Transfer, Vol. 41, No. 3, pp.613-623.
10. Herdan, J.M. (1999) 'Rolling fluids based on vegetables oils', Journal of Synthetic Lubricants, Vol. 16, pp.201-210.
11. Ioan, I.S., Camelia, C. and George, C. (2002) 'On the future of biodegradable vegetable lubricants used for industrial trybosystems', The Annals of University 'Dunarea De Jos' of Galati Fascicle VIII, ISSN 1221-4590.
12. Jacob, J., Bhattacharya, M. and Raynor, P.C. (2004) 'Emulsions containing vegetable oils for cutting fluid application', Colloids and Surfaces A: Physicochem. Engineering Aspects, Vol. 237, pp.141-150.
13. Jayadas, N.H. and Prabhakaran Nair, K. (2006) 'Coconut oil as base oil for industrial lubricants-evaluation and modification of thermal, oxidative and low temperature properties', Tribology International, Vol. 39, pp.873-878.
14. Kshawy, H.A., Dumitrescu, M. and Elbestawi, M.A. (2005) 'Effect of coolant strategy on tool performance, chip morphology and surface quality during high speed machining of A 356 aluminum alloy', International Journal of Machine Tools & Manufacture, Vol. 45, pp.219-227.
15. Kopac, J., Sokovic, M. and Mijanovic, K. (1996) 'Ecological parameters of cutting fluids and their influence on machining process', 26th International Conference of Production Engineering SMPJ '96, Montenegro, Yugoslavia, pp.171-178.
16. Liu, J., Han, R. and Sun, Y. (2005) 'Research on experiments and action mechanism with water vapor as coolant and lubricant in green cutting', International Journal of Machine Tools & Manufacture, Vol. 45, pp.687-694. (Pubitemid 40206506)
17. Naerheim, Y. and Kendig, M. (1987) 'Evaluation of cutting fluid effectiveness in machining using electrochemical techniques', Wear, Vol. 114, pp.51-57.
18. Nakayama, K., Shaw, M.C. and Brewer, R.C. (1966) 'Relationship between cutting forces, temperatures, built-up edge and surface finish', Annals of CIRP, Vol. 16, pp.211-223.
19. Noordin, M.Y., Venkatesh, V.C., Chan, C.L. and Abdullah, A. (2001) 'Performance evaluation of cemented carbide tools in turning AISI 1010 steel', Journal of Materials Processing Technology, Vol. 116, pp.16-21.
20. Rech, J. and Moisan, A. (2003) 'Surface integrity in finish hard turning of case - hardened steels', International Journal of Machine Tools & Manufacture, Vol. 43, pp.543-550.
21. Stein, J.L. and Huh, K. (2002) 'Monitoring cutting forces in turning: a model-based approach', Journal of Manufacturing Science and Engineering, Vol. 124, pp.26-31.
22. Stephenson, D.A., Barone, M.R. and Dargush, G.F. (1994) 'Thermal expansion of the workpiece in turning', in D.A. Stephenson and R. Stevenson (Eds.), Material Issues in Machining-II and The Physics of Machining Processes-II, TMS and ASME, pp.257-279.
23. Sukvittayawong, S. and Inasaki, I. (1991) 'Optimization of turning process by cutting force measurement', JSME International Journal Series C.34, No. 4, pp.546-552.
24. Tlusty, J. and Andrews, G.C. (1983) 'A critical review of sensors for unmanned machining', CIRP Annals, Vol. 32. No. 2, pp.563-572.
25. Trent, E.M. (1991) Metal Cutting, 3rd ed., Butterworths, London, pp.145-167.
26. Tzeng, Y-F. (2006) 'Parameter design optimization of computerized numerical control turning tool steels for high dimensional precision and accuracy', Materials and Design, Vol. 27, pp.665-675.
27. Vardarajan, A.S., Philip, P.K. and Ramamoorthy, B. (2002) 'Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning', International Journal of Machine Tools & Manufacture, Vol. 42, pp.193-200.
28. Vieira, J.M., Machado, A.R. and Ezugwu, E.O. (2001) 'Performance of cutting Fluids during face milling of steels', Journal of Materials Processing Technology, Vol. 116, pp. 244-251.
29. Week, M. (1983) 'Machine diagnostics in automated production', Journal of Manufacturing System, Vol. 2, pp.101-106.