Mechanical and corrosion resistance of a new nanostructured Ti-Zr-Ta-Nb alloy

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 4, Issue 7, 2011, Pages 1421-1430

  Raducanu, D ^a   Vasilescu, E ^b   Cojocaru, V D ^a   Cinca, I ^a   Drob, P ^b   Vasilescu, C ^b   Drob, S I ^b  

^a UNIVERSITY POLITEHNICA OF BUCHAREST   (Romania)

^b INSTITUTE OF PHYSICAL CHEMISTRY   (Romania)

Author keywords

Accumulative roll bonding (ARB) processing; Corrosion resistance; Fracture behaviour; New Ti 10Zr 5Nb 5Ta alloy; Young's modulus

Indexed keywords

ACCUMULATIVE ROLL BONDING; ACCUMULATIVE ROLL BONDING (ARB) PROCESSING; AS CAST ALLOY; BONE SUBSTITUTES; COLD CRUCIBLES; CORROSION BEHAVIOUR; CORTICAL BONE; DEFORMATION DEGREES; ELASTOPLASTIC BEHAVIOUR; ELASTOPLASTIC BODIES; ELECTROCHEMICAL PARAMETERS; FRACTURE BEHAVIOUR; IMPLANT MATERIALS; ION RELEASE RATE; LAYER THICKNESS; LINEAR ELASTIC; LOW YOUNG'S MODULUS; NANO-STRUCTURED; NEW TI-10ZR-5NB-5TA ALLOY; STRUCTURAL AND MECHANICAL PROPERTIES; TENSILE CURVE; THERMO-MECHANICAL PROCESSING; ULTIMATE TENSILE STRENGTH; YOUNG'S MODULUS;

ALLOYING ELEMENTS; ALLOYS; BONE; CORROSION RESISTANCE; ELASTIC MODULI; ELASTICITY; ELASTOPLASTICITY; NIOBIUM; NIOBIUM ALLOYS; ROLL BONDING; TANTALUM; TANTALUM ALLOYS; TENSILE STRENGTH; ZIRCONIUM;

CERIUM ALLOYS;

ALLOY; NANOMATERIAL; NIOBIUM; TANTALUM; TITANIUM; ZIRCONIUM;

ACCUMULATIVE ROLL BONDING; ARTICLE; BONE PROSTHESIS; CHEMICAL BINDING; CHEMICAL STRUCTURE; CORROSION; CORTICAL BONE; ELASTICITY; ELECTROCHEMISTRY; HARDNESS; MOLECULAR MECHANICS; PRIORITY JOURNAL; TENSILE STRENGTH; YOUNG MODULUS;

ALLOYS; COATED MATERIALS, BIOCOMPATIBLE; CORROSION; MECHANICAL PROCESSES; NANOSTRUCTURES; NIOBIUM; TANTALUM; TITANIUM; ZIRCONIUM;

EID: 79960560097     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2011.05.012     Document Type: Article

References (55)

1. Assis S.L., Costa I. Electrochemical evaluation of Ti-13Nb-13Zr, Ti-6Al-4V and Ti-6Al-7Nb alloys for biomedical application by long-term immersion tests. Mater. Corros. 2007, 58:329-333.
2. Assis S.L., Wolynec S., Costa I. Corrosion characterization of titanium alloys by electrochemical techniques. Electrochim. Acta 2006, 51:1815-1819.
3. Assis S.L., Wolynec S., Costa I. The electrochemical behavior of Ti-13Nb-13Zr alloy in various solutions. Mater. Corros. 2008, 59:739-743.
4. Azushima A., Kopp R., Korhonen A., Yang D.Y., Micari F., Lahoti G.D., Groche P., Yanagimoto J., Tsuji N., Rosochowski A., Yanagida A. Severe plastic deformation (SPD) processes for metals. CIRP Ann. Manuf. Technol. 2008, 57:716-735.
5. Banerjee R., Nag S., Stechschulte J., Fraser H.L. Strengthening mechanisms in Ti-Nb-Zr-Ta and Ti-Mo-Zr-Fe orthopaedic alloys. Biomaterials 2004, 25:3413-3419.
6. Bertrand E., Gloriant T., Gordin D.M., Vasilescu E., Drob P., Vasilescu C., Drob S.I. Synthesis and characterisation of a new superelastic Ti-25Ta-25Nb biomedical alloy. J. Mech. Behav. Biomed. Mater. 2010, 3:559-564.
7. Beyerlein I.J., László S.T. Texture evolution in equal-channel angular extrusion. Prog. Mater. Sci. 2009, 54:427-510.
8. Castellani C., Lindtner R.A., Hausbrandt P., Tschegg E., Stanzl-Tschegg S.E., Zanoni G., Beck S., Weinberg A.M. Bone-implant interface strength and osseointegration: biodegradable magnesium alloy versus standard titanium control. Acta Biomater. 2011, 7:432-440.
9. Dinda G.P., Rösner H., Wilde G. Synthesis of bulk nanostructured Ni, Ti and Zr by repeated cold-rolling. Scr. Mater. 2005, 52:577-582.
10. Eisenbarth E., Velten D., Muller M., Thull R., Breme J. Biocompatibility of β-stabilizing elements of titanium alloys. Biomaterials 2004, 25:5705-5713.
11. Geetha M., Kamaki Mudali Y.U., Gogia A.K., Asokamani R., Raj B. Influence of microstructure and alloying elements on corrosion behavior of Ti-13Nb-13Zr alloy. Corros. Sci. 2004, 46:877-892.
12. Geetha M., Singh A.K., Asokamini R., Gogia A.K. Ti based biomaterials, the ultimate choice for orthopaedic implants-a review. Prog. Mater. Sci. 2009, 54:397-425.
13. Giesen E., Ding M., Dalstra M., van Eijden T. Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic. J. Biomech. 2001, 34:799-803.
14. Guitar A., Vigna G., Luppo M.I. Microstructure and tensile properties after thermohydrogen processing of Ti-6Al-4V. J. Mech. Behav. Biomed. Mater. 2009, 2:156-163.
15. Hayama A.O.F., Sandim H.R.Z. Annealing behavior of coarse-grained titanium deformed by cold rolling. Mater. Sci. Eng. A 2006, 418:182-192.
16. Hebert R.J., Perepezko J.H. Deformation-induced synthesis and structural transformations of metallic multilayers. Scr. Mater. 2004, 50:807-812.
17. Hsieh P.J., Huang J.C., Hung Y.P., Chou S.I., Jang J.S.C. Characterization on nanocrystallization and amorphization evolution in Zr-X alloys during ARB process. Mater. Chem. Phys. 2004, 88:364-376.
18. Kamikawa N., Sakai T., Tsuji N. Effect of redundant shear strain on microstructure and texture evolution during accumulative roll-bonding in ultralow carbon IF steel. Acta Mater. 2007, 55:5873-5888.
19. Karthega M., Raman V., Rajendran N. Influence of potential on the electrochemical behaviour of beta titanium alloys in Hank's solution. Acta Biomater. 2007, 3:1019-1023.
20. Khan M.A., Williams R.L., Williams D.F. In-vitro corrosion and wear of titanium alloys in the biological environment. Biomaterials 1996, 17:2117-2126.
21. Laheurte P., Prima F., Eberhardt A., Gloriant T., Wary M., Patoor E. Mechanical properties of low modulus β titanium alloys designed from the electronic approach. J. Mech. Behav. Biomed. Mater. 2010, 3:565-573.
22. Lee W.S., Lin C.F., Chen T.H., Hwang H.H. Effects of strain rate and temperature on mechanical behaviour of Ti-15Mo-5Zr-3Al alloy. J. Mech. Behav. Biomed. Mater. 2008, 1:336-344.
23. Lopez M.F., Jimenez J.A., Gutierrez A. Corrosion study of surface-modified vanadium-free titanium alloys. Electrochim. Acta 2003, 48:1395-1401.
24. Lopez M.F., Soriano L., Palomares F.J., Sanchez-Agudo M., Fuentes G.G., Gutierrez A., Jimenez J.A. Soft x-ray absorption spectroscopy study of passive and oxide layers of titanium alloys. Surf. Interface Anal. 2002, 33:570-579.
25. Martins D.Q., Osorio W.R., Souza M.E.P., Caram R., Garcia A. Effects of Zr content on microstructure and corrosion resistance of Ti-30Nb-Zr casting alloys for biomedical applications. Electrochim. Acta 2008, 53:2809-2817.
26. McLachlan D.R.C., Farnees G., Galin I.T. Biological Aspects of Metals and Metal Related Diseases 1983, Ravan Press, New York.
27. Morand C., Lopez M.F., Gutierrez A., Jimenez J.A. AFM and SEM characterization of non-toxic vanadium-free Ti alloys used as biomaterials. Appl. Surf. Sci. 2003, 220:79-87.
28. Murr L.E., Quinones S.A., Gaytan S.M., Lopez M.I., Rodela A., Martinez E.Y., Hernandez D.H., Martinez E., Medina F., Wicker R.B. Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. J. Mech. Behav. Biomed. Mater. 2009, 2:20-32.
29. Niinomi M. Mechanical biocompatibilities of titanium alloys for biomedical applications. J. Mech. Behav. Biomed. Mater. 2008, 1:30-42.
30. Okazaki Y. A new Ti-15Zr-4Nb-4Ta alloy for medical applications. Curr. Opin. Solid State Mater. Sci. 2001, 5:45-53.
31. Okazaki Y., Nishimura E., Nakada H., Kobayashi K. Surface analysis of Ti-15Zr-4Nb-4Ta alloy after implantation in rat tibia. Biomaterials 2001, 22:599-607.
32. Okazaki Y., Rao S., Ito Y., Tateishi T. Corrosion resistance, mechanical properties, corrosion fatigue strength and cytocompatibility of new Ti alloys without Al and V. Biomaterials 1998, 19:1197-1215.
33. Popa M.V., Demetrescu I., Vasilescu E., Drob P., Santana Lopez A., Mirza-Rosca J., Vasilescu C., Ionita D. Corrosion susceptibility of implant materials Ti-5Al-4V and Ti-6Al-4Fe in artificial extra-cellular fluids. Electrochim. Acta 2004, 49:2113-2119.
34. Pourbaix M. Atlas of Electrochemical Equilibria in Aqueous Solutions 1974, NACE, Houston.
35. Raducanu D., Cojocaru V.D., Cinca I., Ichim I., Sichin A. Materials development on the nanoscale by accumulative roll bonding procedure. J. Optoelectron. Adv. Mater. 2007, 9:3346-3349.
36. Ramos-Saenz C.R., Sundaram F.A., Diffoot-Carlo N. Tribological properties of Ti-based alloys in simulated bone-implant interface with Ringer's solution at fretting contacts. J. Mech. Behav. Biomed. Mater. 2010, 3:549-558.
37. Rao S., Okazaki Y., Tateishi T., Ushida T., Ito Y. Cytocompatibility of new Ti alloy without Al and V by evaluating the relative growth ratios of fibroblasts L929 and osteoblasts MC3T3-E1 cells. Mater. Sci. Eng., C 1997, 4:311-314.
38. Robin A., Carvalho O.A.S., Schneider S.G., Schneider S. Corrosion behavior of Ti-xNb-13Zr alloys in Ringer's solution. Mater. Corros. 2008, 59:929-933.
39. Saito Y., Utsunomiya H., Tsuji N., Sakai T. Novel ultra-high straining process for bulk materials development of the accumulative roll-bonding (ARB) process. Acta Mater. 1999, 47:579-583.
40. Scharnweber D. Degradation (in vitro-in vivo corrosion). Metals as Biomaterials 1998, 101-151. John Willey & Sons, London, UK. J.A. Helsen, H.J. Breme (Eds.).
41. Shaarbaf M., Toroghinejad M.R. Nano-grained copper strip produced by accumulative roll bonding process. Mater. Sci. Eng. A 2008, 473:28-33.
42. Tamilselvi S., Murugaraj R., Rajendran N. Electrochemical impedance spectroscopic studies of titanium and its alloys in saline medium. Mater. Corros. 2007, 58:113-119.
43. Tamilselvi S., Rajendran N. In vitro corrosion behaviour of Ti-5Al-2Nb-1Ta alloy in Hanks solution. Mater. Corros. 2007, 58:285-289.
44. Tanaka Y., Nakai M., Akahori T., Niinomi M., Tsutsumi Y., Doi H., Hanawa T. Characterization of air-formed surface oxide film on Ti-29Nb-13Ta-4.6Zr alloy surface using XPS and AES. Corros. Sci. 2008, 50:2111-2116.
45. Thomsen P., Larsson C., Ericson L.E., Sennerby L., Lausama J., Kasemo B. Structure of the interface between rabbit cortical bone and implants of gold, zirconium and titanium. J. Mater. Sci. Mater. Med. 1997, 8:653-665.
46. Tsuji N., Ueji R., Minamino Y. Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process. Scr. Mater. 2002, 47:69-76.
47. Van der Voet G.B., Marani E., Tio S., De Wolff F.A. Aluminum neurotoxycity. Histo- and Cyto-Chemistry as a Tool in Environmental Toxicology 1991, 235-242. Fisher, Stuttgart, Germany. W. Graumann, J. Drukker (Eds.).
48. Vasilescu E., Drob P., Raducanu D., Cinca I., Mareci D., Calderon Moreno J.M., Popa M., Vasilescu C., Mirza Rosca J.C. Effect of thermo-mechanical processing on the corrosion resistance of Ti6Al4V alloys in biofluids. Corros. Sci. 2009, 51:2885-2896.
49. Vasilescu E., Drob P., Raducanu D., Cojocaru V.D., Cinca I., Iordachescu D., Ion R., Popa M., Vasilescu C. In vitro biocompatibility and corrosion resistance of a new implant titanium base alloy. J. Mater. Sci. Mater. Med. 2010, 21:1959-1968.
50. Velten D., Schenk Meuser K., Biehl V., Duschner H., Breme J. Characterization of thermal and anodic oxide layers on beta-titanium and on near-beta-titanium alloys for biomedical applications. Z. Met.kd. 2003, 94:667-675.
51. Wang B.L., Zheng Y.F., Zhao L.C. Electrochemical corrosion behavior of biomedical Ti-22Nb and Ti-22Nb-6Zr alloys in saline medium. Mater. Corros. 2009, 60:788-794.
52. Yu S.Y., Scully J.R. Corrosion and passivity of Ti-13%Nb-13%Zr in comparison to other biomedical implant alloys. Corrosion 1997, 53:965-976.
53. Zhang R., Acoff V.L. Processing sheet materials by accumulative roll bonding and reaction annealing from Ti/Al/Nb elemental foils. Mater. Sci. Eng. A 2007, 463:67-73.
54. Zherebtsov S.V., Dyakonov G.S., Salem A.A., Malysheva S.P., Salishchev G.A., Semiatin S.L. Evolution of grain and subgrain structure during cold rolling of commercial-purity titanium. Mater. Sci. Eng. A 2011, 528:3474-3479.
55. Zysset P.K., Guo X.E., Hoffler C.E., Moore K.E., Goldstein S.A. Mechanical properties of human trabecular bone lamellae quantified by nanoindentation. Technol. Health Care 1998, 6:429-432.