Mechanical biocompatibilities of titanium alloys for biomedical applications

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 1, Issue 1, 2008, Pages 30-42

  Niinomi, Mitsuo ^a  

^a TOHOKU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

FRETTING FATIGUE LIFE; MULTIFUNCTIONAL DEFORMATION;

BIOCOMPATIBILITY; ELASTIC MODULI; FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; MARTENSITIC TRANSFORMATIONS; MEDICAL APPLICATIONS; TENSILE STRENGTH;

TITANIUM ALLOYS;

TITANIUM;

AGING; BEHAVIOR; BIOCOMPATIBILITY; CHEMICAL STRUCTURE; DEHYDROGENATION; FATIGUE; HYDROGENATION; MEDICAL TECHNOLOGY; POROSITY; PRIORITY JOURNAL; REVIEW; YOUNG MODULUS;

ALLOYS; BIOCOMPATIBLE MATERIALS; BIOMEDICAL ENGINEERING; COMPRESSIVE STRENGTH; ELASTIC MODULUS; HARDNESS; MATERIALS TESTING; PROSTHESES AND IMPLANTS; TENSILE STRENGTH; TITANIUM;

EID: 35048893408     PISSN: 17516161     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2007.07.001     Document Type: Review

References (41)

1. Akahori T., et al. Effects of thermochemical treatment on properties of cast Ti-6Al-7Nb alloy for dental applications. J. Japan Inst. Met. 64 (2000) 895-902
2. Akahori T., et al. Fatigue, fretting fatigue and corrosion characteristics of biocompatible beta type titanium alloy conducted with various thermo-mechanical treatments. Mater. Trans. 45 (2004) 1540-1548
3. Akahori T., et al. Notch fatigue properties of a Ti-29Nb-13Ta-4.6Zr alloy for biomedical applications. J. Japan Inst. Light Met. 55 (2005) 575-581
4. Akahori T., et al. Effect of ageing treatment on mechanical properties of Ti-29Nb-13Ta-4.6Zr alloy for biomedical applications. J. Japan Inst. Met. 70 (2006) 295-303
5. Akmoulin I.A., et al. Dynamic fracture toughness of Ti-6Al-4V alloy with various stabilities of β phase. Metall. Trans. A 25A (1994) 1655-1666
6. Baba, Y., et al., 2005. Fabrication of porous titanium for biomedical applications/ultra high molecular polyethylene composites. In: Abstracts of the 137th Fall Meeting of Japan Institute of Metals, p. 441
7. Fukui Y., et al. Mechanical properties of a Ti-Nb-Al shape memory alloy. Mater. Trans. 45 (2004) 1077-1082
8. Gunawarman, et al. Effect of β phase stability at room temperature on mechanical properties of β-rich α + β type Ti-4.5Al-3V-2Mo-2Fe alloy. ISIJ Internat. 42 (2001) 191-199
9. Gunawarman, et al. Fatigue characteristics of low cost β titanium alloys for healthcare and medical applications. Mater. Trans. 46 (2005) 1570-1777
10. Hanawa T., et al. Metallic biomaterials in body fluid and their surface modification. In: Niinomi M., et al. (Ed). Structural Biomaterials for the 21st Century (2001), TMS 145-156
11. Imam M.A., and Gilmore C.M. Fatigue and microstructural properties of quenched Ti-6Al-4V. Metall. Trans. A 14A (1983) 233-240
12. Kobayashi T., and Yamamoto H. Development of high toughness in austempered type ductile cast iron and evaluation of its properties. Metall. Trans. A 19A (1998) 319-327
13. Kuroda D., et al. Design and Mechanical properties of new beta type titanium alloys for implant materials. Mater. Sci. Eng. A A243 (1998) 244-249
14. Maruyama N., et al. Fretting fatigue strength of a Ti-6Al-4V alloy in a pseudo-body-fluid and quantitative analysis of the substances in the fluid. J. Japan. Soc. Biomater. 13 (1995) 14-20
15. Matsumoto, H., et al., 2006. Strengthening of low Young's modulus beta Ti-Nb-Sn alloys by thermomechanical processing. In: Proc. Materials & Processes for Medical Devices Conference, ASM International, pp. 9-14
16. Nakai, M., et al., 2006. Development of simple fabrication process of porous titanium and PMMA composite. In: Abstracts of the 28th Annual Meeting of Japanese Society for Biomaterials, p. 350
17. Niinomi M. Mechanical properties of biomedical titanium alloys. Mater. Sci. Eng. A A243 (1998) 231-236
18. Niinomi, M., et al., 1999. Corrosion wear fracture of new β type biomedical titanium alloys, Mater. Sci. Eng. A, A263 193-199
19. Niinomi M. Recent metallic materials for biomedical applications. Met. Mater. Trans. A 32A (2001) 477-486
20. Niinomi, M., 2003. Recent research and development in titanium alloys for biomedical applications and healthcare goods. In: STAM, vol. 4, pp. 445-454
21. Niinomi M. Japanese research and development in metallic biomedical, dental and healthcare materials. JOM 57 (2005) 18-24
22. Niinomi M. Mechanical characteristics and microstructure of drawn wire of Ti-29Nb-13Ta-4.6Zr for biomedical applications. Mater. Sci. Eng. C 27 (2007) 154-16
23. Niinomi M. Fatigue characteristics of metallic biomaterials. Int. J. Fatigue 29 (2007) 992-1000
24. Niinomi M. Recent research and development in metallic materials for biomedical, dental and healthcare products. Mater. Sci. Forum 539-543 (2007) 193-200
25. Niinomi M. Frictional wear characteristics of biomedical Ti-29Nb-13Ta-4.6Zr alloy with various microstructures in air and simulated body fluid. Biomed. Mater. 2 (2007) S167-S174
26. Niinomi M., et al. The effect of deformation-induced transformation on the fracture toughness of commercial titanium alloys. Metall. Trans. A 21A (1990) 1733-1744
27. Niinomi M., et al. Fatigue crack propagation in Ti-6Al-4V alloys. In: Froes F.H., and Caplan I. (Eds). Titanium'92 (1993), TMS 1835-1842
28. Niinomi M., et al. Mechanical properties and fracture characteristics of Ti-6Al-4V and Ti-5Al-2.5Fe with refined microstructure using hydrogen. Metall. Mater. Trans. A 26A (1995) 1141-1151
29. Niinomi M., et al. Development of low rigidity β-type titanium alloy for biomedical applications. Mater. Trans. 43 (2002) 2970-2977
30. Niinomi M., et al. Wear characteristics of surface oxidation treated new biomedical β-type titanium alloy in simulated body environment. J. Iron Steel Inst. Japan 88 (2002) 567-574
31. Niinomi M., et al. Fretting fatigue characteristics of new biomedical β-type titanium alloy in air and simulated body environment. J. Iron Steel Inst. Japan 88 (2002) 553-560
32. Niinomi M., et al. Material characteristics and biocompatibility of low rigidity titanium alloys for biomedical applications. In: Yaszemski M.J., et al. (Ed). Biomaterials in orthopedics (2004), Marcel Dekker Inc. 41-62
33. Niinomi M., et al. Titanium and its alloys. Ency. of biomaterials engineering (2006), Marcel Dekker Inc. 1-8 on line publication
34. Niinomi, M., et al., 2006b. Improvement in wear resistance of beta-type titanium alloy for biomedical applications by surface coating of hard layer. In: Proc. 15th Int. Symp. on Processing and Fabrication of Advanced Materials, MT & T, pp. 141-161
35. Niinomi M., et al. Super elastic functional β titanium alloy with low Young's modulus for biomedical applications. ASTM STP 1471 (2006) 135-150
36. Niinomi, M., et al., 2007. In-situ X-ray analysis of mechanism of nonlinear super elastic behavior of Ti-Nb-Ta-Zr system beta-type titanium alloy for biomedical applications. Mater. Sci. Eng. C (in press)
37. Oh I.H., et al. Mechanical properties of porous titanium compacts prepared by powder sintering. Scripta Mater. 49 (2003) 1197-1202
38. Sakaguchi N., et al. Deformation behaviors of Ti-Nb-Ta-Zr system alloys for biomedical applications. Mater. Trans. 45 (2004) 1113-1119
39. Sumita, M., et al., 1993. Study on improvement of fretting fatigue characteristics of high strength structural materials. In: Research Reports of National Institute for Materials Science, vol. 14, pp. 207-218
40. Takeda J., et al. Contact pressure and fretting fatigue characteristics of highly workable titanium alloy with equiaxed α and Widmnstätten α structure. J. Japan Inst. Light Met. 55 (2005) 661-667
41. Tane, M., et al. (in preparation). Single-crystal elastic constants of β-type Ti-29Nb-13Ta-4.6Zr alloy developed for biomedical applications, Acta Mat