Nonconventional (non-silicon-based) photovoltaic materials

Annual Review of Materials Research

Volumn 41, Issue , 2011, Pages 297-321

  Unold, T ^a   Schock, H W ^a  

^a HAHN MEITNER INSTITUT   (Germany)

Author keywords

Defects; Photoconversion; Solar cells; Sustainability; Thin film

Indexed keywords

ABSORPTION COEFFICIENTS; ALTERNATIVE MATERIALS; ALTERNATIVE SUBSTRATES; CRYSTALLINE SILICONS; DIRECT BAND GAP; LOW COSTS; NON-CONVENTIONAL MATERIALS; OPTOELECTRONIC PROPERTIES; PHOTOCONVERSION; PHOTOVOLTAIC DEVICES; PHOTOVOLTAIC MATERIALS; PHOTOVOLTAIC MODULES; PHOTOVOLTAICS;

MATERIALS; POLYIMIDES; SOLAR POWER GENERATION; STAINLESS STEEL;

PHOTOVOLTAIC EFFECTS;

EID: 79960138126     PISSN: 15317331     EISSN: None     Source Type: Book Series    
DOI: 10.1146/annurev-matsci-062910-100437     Document Type: Article

References (89)

1. EPIA. 2010. Global market outlook for photovoltaics until 2014. http://www.epia.org.
2. Wadia C, Alivisatos AP, KammenDM. 2009. Materials availability expands the opportunity for large-scale photovoltaics deployment. Environ. Sci. Technol. 43:2072-77.
3. Goetzberger A, Hebling C, SchockHW. 2003. Photovoltaic materials, history, status and outlook. Mater. Sci. Eng. R 40:1-46.
4. Brabec C, Scherf U, Dyakonov V. 2008. Organic Photovoltaics.Weinheim: Wiley-VCH.
5. B̈ oer KW, Rothwarf KW. 1976. Materials for solar photovoltaic energy conversion. Annu. Rev. Mater. Sci. 6:303-33.
6. Mitchell KW. 1982. Status of new thin-film photovoltaic technologies. Annu. Rev. Mater. Sci. 12:401-15.
7. Birkmire RW, Eser E. 1997. Polycrystalline thin film solar cells: present status and future potential. Annu. Rev. Mater. Sci. 27:625-53. (Pubitemid 127668344)
8. Bube RH. 1990. Materials for photovoltaics. Annu. Rev. Mater. Sci. 20:19-50.
9. Shockley W, Queisser HJ. 1961. Detailed balance limit of efficiency of p-n junction solar cells. J. Appl. Phys. 32:510-19.
10. Henry CH. 1980. Limiting efficiencies of ideal single and multiple energy-gap terrestrial solar-cells. J. Appl. Phys. 51:4494-500.
11. Tiedje T, Yablonovitch E, Cody GD, Brooks BG. 1984. Limiting efficiency of silicon solar-cells. IEEE Trans. Electron Devices 31:711-16.
12. Green MA, Emery K, Hishikawa Y, WartaW.2010. Solar cell efficiency tables (version 36). Prog. Photovolt. 18:346-52.
13. Merdes S, Mainz R, Klaer J, Meeder A, Rodriguez-Alvarez H, et al. 2011. 12.6% efficient CdS/Cu(In, Ga)S2-based solar cell with an open circuit voltage of 879 mV prepared by a rapid thermal process. Solar Energy Mater. Solar Cells 95:864-69.
14. AbuShama JAM, Johnston S, Moriarty T, Teeter G, Ramanathan K, Noufi R. 2004. Properties of ZnO/CdS/CuInSe2 solar cells with improved performance. Prog. Photovolt. Res. Appl. 12:39-45. (Pubitemid 38162982)
15. Young DL, Keane J, Duda A, AbuShama JAM, Perkins CL, et al. 2003. Improved performance in ZnO/CdS/CuGaSe2 thin-film solar cells. Prog. Photovolt. Res. Appl. 11:535-411.
16. Klein A, Tomm Y, Schlaf R, Pettenkofer C, Jaegermann W, et al. 1998. Photovoltaic properties ofWSe2 single-crystals studied by photoelectron spectroscopy. Solar Energy Mater. Solar Cells 51:181-91. (Pubitemid 128430944)
17. Ennaoui A, Fiechter S, Pettenkofer C, Alonsovante N, Buker K, et al. 1993. Iron disulfide for solar-energy conversion. Solar Energy Mater. Solar Cells 29:289-370.
18. Bothe K, Bauer GH, Unold T. 2002. Spatially resolved photoluminescence measurements on Cu(In, Ga)Se2 thin films. Thin Solid Films 403:453-56. (Pubitemid 34100390)
19. Efros AL, Shklovskii BI. 1984. Electronic Properties of Doped Semiconductors. New York: Springer-Verlag.
20. Dirnstorfer I, Wagner M, Hofmann DM, Lampert MD, Karg F, Meyer BK. 1998. Characterization of CuIn(Ga)Se2 thin films. Phys. Status Solid. A 168:163-75.
21. Werner JH, Mattheis J, Rau U. 2005. Efficiency limitations of polycrystalline thin film solar cells: case of Cu(In, Ga)Se2. Thin Solid Films 480:399-409. (Pubitemid 40643013)
22. Mattheis J, Werner JH, RauU. 2008. Finite mobility effects on the radiative efficiency limit of pn-junction solar cells. Phys. Rev. B 77:085203.
23. Green MA. 1984. Limits on the open-circuit voltage and efficiency of silicon solar-cells imposed by intrinsic Auger processes. IEEE Trans. Electron Devices 31:671-78.
24. Fahrenbruch A, Bube RH. 1983. Fundamentals of Solar Cells: Photovoltaic Energy Conversion. New York: Academic.
25. Rau U, Schock HW. 1999. Electronic properties of Cu(In, Ga)Se2 heterojunction solar cells: recent achievements, current understanding, and future challenges. Appl. Phys. A 69:131-47.
26. Pudov AO, Sites JR, Contreras MA, Nakada T, Schock H-W. 2005. CIGS J-V distortion in the absence of blue photons. Thin Solid Films 480-481:273-78. (Pubitemid 40642991)
27. Naghavi N, Abou-Ras D, Allsop N, Barreau N, Bucheler S, et al. 2010. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In, Ga)(S, Se)2 based thin film photovoltaics: present status and current developments. Prog. Photovolt. 18:411-33.
28. Kaiser I, Ernst K, Fischer CH, Koenenkamp R, Rost C, et al. 2011. The eta-solar cell with CuInS2: a photovoltaic cell concept using an extremely thin absorber (eta). Solar Energy Mater. Solar Cells 67:89-96.
29. Schmid D, Ruckh M, Schock HW. 1996. A comprehensive characterization of the interfaces in Mo/CIS/CdS/ZnO solar cell structures. Solar Energy Mater. Solar Cells 41-42:281-94. (Pubitemid 126357077)
30. Guillemoles JF, Rau U, Kronik L, Schock HW, Cahen D. 1999. Cu(In, Ga)Se2 solar cells: device stability based on chemical flexibility. Adv. Mater. 10:31-36.
31. Guillemoles JF, Kronik L, Cahen D, Rau U, Jasenek A, Schock HW. 2000. Stability issues of Cu(In, Ga)Se2-based solar cells. J. Phys. Chem. B 104:4849-62.
32. Ruberto MN, Rothwarf A. 1987. Time-dependent open-circuit voltage in CuInSe2 solar cells: theory and experiment. J. Appl. Phys. 61:4662-69.
33. Anderson BA. 2000. Materials availability for large-scale thin-film photovoltaics. Prog. Photovolt. 8:61-76.
34. Green MA. 2009. Estimates of Te and In prices from direct mining of known ores. Prog. Photovolt. 17:347-59.
35. -2005. Abundance of elements in the Earth's crust and in the sea. In CRC Handbook of Chemistry and Physics, ed. DR Lide, pp. 14-17. Boca Raton: CRC.
36. Fthenakis VM, Fuhrmann M, Heiser J, Lanzirotti A, Fitts J, Wang W. 2005. Emissions and encapsulation of cadmium in CdTe PV modules during fires. Prog. Photovolt. 13:713-23. (Pubitemid 41788624)
37. Thompson CV. 2000. Structure evolution during processing of polycrystalline films. Annu. Rev. Mater. Sci. 30:159-90.
38. Pamplin B. 1981. The adamantine family of compounds. Prog. Cryst. Growth Charact. 3:179-92.
39. Grimm HG, Sommerfeld A. 1926. Ü ber den Zusammenhang des Abschlusses der Elektronengruppen im Atom mit den chemischen Valenzzahlen. Z. Phys. Chem. 110:36-59.
40. Adachi S. 2005. Properties of Group IV, III-V and II-VI Semiconductors.West Sussex: John Wiley & Sons.
41. Friedman DJ. 2010. Progress and challenges for next-generation high-efficiency multijunction solar cells. Curr. Opin. Solid State Mater. Sci. 14:131-38.
42. Benner JP, Blakeslee AE. 1982. Effects of grain boundaries in GaAs solar cells. In Grain Boundaries in Semiconductors, ed. G Pike, CH Seeger, HJ Leamy, pp. 205-16. New York: Elsevier Sci. (Pubitemid 13594785)
43. Sharma MK, Joshi DP. 2010. Effect of grain boundaries on photovoltaic properties of PX-GaAs films. Ind. J. Pure Appl. Phys. 48:575-80.
44. Wu X, Keane JC, Dhere NG, DeHart C, Duda A, et al. 2001. 16.5% efficient CdS/CdTe polycrystalline thin-film solar cell. Presented at Eur. Photovolt. Solar Energy Conf., 17th, Munich.
45. Demtsu SH, Sites JR. 2006. Effect of back-contact barrier on thin-film CdTe solar cells. Thin Solid Films 510:320-24.
46. Jaegermann W, Klein A, Mayer T. 2009. Interface engineering of inorganic thin-film solar cells:materialsscience challenges for advanced physical concepts. Adv. Mater. 21:4196-206.
47. Corwine CR, Pudov AO, Gloeckler M, Demtsu SH, Sites JR. 2004. Copper inclusion and migration from the back contact in CdTe solar cells. Solar Energy Mater. Solar Cells 82:481-89.
48. McCandless BE, Sites J. 2003. CdTe solar cells. In Handbook of Photovoltaics: Science and Engineering, ed. A Luque, S Hegedus, pp. 617-62. West Sussex: John Wiley.
49. Visoly-Fisher I, Cohen SR, Ruzin A, Cahen D. 2004. How polycrystalline devices can outperform singlecrystal ones: thin film CdTe/CdS solar cells. Adv. Mater. 16:879-83.
50. Shay JL, Wernick JH. 1975. Ternary Chalcopyrite Semiconductors: Growth, Electronic Properties and Applications. Oxford: Pergamon.
51. Hahn H, Frank G, Klingler W, Meyer AD, StorgerG. 1953. Untersuchungen ̈ uber ternare Chalkogenide. Z. Anorg. Allg. Chem. 271:153-70.
52. Rau U, Taretto K, Siebentritt S. 2009. Grain boundaries in Cu(In, Ga)(Se, S)2 thin-film solar cells. Appl. Phys. A 96:221-34.
53. Nichterwitz M, Abou-RasD, Sakurai K, Bundesmann J, Unold T, et al. 2009. Influence of grain boundaries on current collection in Cu(In, Ga)Se2 thin-film solar cells. Thin Solid Films 517:2554-57.
54. Zhang SB, Wei SH, Zunger A, Katayama-Yoshida H. 1998. Defect physics of the CuInSe2 chalcopyrite semiconductor. Phys. Rev. B 57:9642-56. (Pubitemid 128489339)
55. Abou-RasD, Jahn U, Nichterwitz M, Unold T, Klaer J, SchockHW.2010. Combined electron backscatter diffraction and cathodoluminescence measurements on CuInS2/Mo/glass stacks and CuInS2 thin-film solar cells. J. Appl. Phys. 107:014311.
56. Ruckh M, Schmid D, Kaiser M, Schaffler R, Walter T, Schock HW. 1994. Influence of substrates on the electrical properties of Cu(In, Ga)Se2 thin films. Proc. IEEE Photovolt. Spec. Conf., 24th, New York, 156-59.
57. Caballero R, Kaufmann CA, Eisenbarth T, Cancela M, Hesse R, et al. 2009. The influence of Na on low temperature growth of CIGS thin film solar cells on polyimide substrates. Thin Solid Films 517:2187-90.
58. Romeo A, Khrypunov G, Kurdesau F, Arnold M, Batzner DL, et al. 2006. High-efficiency flexible CdTe solar cells on polymer substrates. Solar Energy Mater. Solar Cells 90:3407-15.
59. Persson C, Zunger A. 2003. Anomalous grain boundary physics in polycrystalline CuInSe2: the existence of a hole barrier. Phys. Rev. Lett. 91:266401.
60. Siebentritt S, Igalson M, Persson C, Lany S. 2010. The electronic structure of chalcopyrites: bands, point defects and grain boundaries. Prog. Photovolt. 18:390-410.
61. Haarstrich J, Metzner H, Oertel J, Ronning C, Rissom T, et al. 2011. Increased homogeneity and opencircuit voltage of Cu(In, Ga)Se2 solar cells due to higher deposition temperature. Solar EnergyMater. Solar Cells. 95:1028-30.
62. Schubert B-A, Marsen B, Cinque S, Unold T, Klenk R, et al. 2011. Cu2ZnSnS4 thin film solar cells by fast coevaporation. Prog. Photovolt. Res. Appl. 19:93-96.
63. Katagiri H, Jimbo K, Yamada S, Kamimura T, Maw WS, et al. 2008. Enhanced conversion efficiencies of Cu2ZnSnS4 based thin film solar cells by using preferential etching technique. Appl. Phys. Expr. 1:041201.
64. Todorov TK, Reuter KB, MitziDB. 2010. High-efficiency solar cell with earth-abundant liquid-processed absorber. Adv. Mater. 22:E156-59.
65. Guo Q, Ford GM, Yang W-C, Walker BC, Stach EA, et al. 2010. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals. J. Am. Chem. Soc. 132:17384-86.
66. Weber A, Mainz R, SchockHW. 2010. On the Sn loss from thin films of the material system Cu-Zn-Sn-S in high vacuum. J. Appl. Phys. 107:013516.
67. Madelung O, ed. 1996. Semiconductors: Basic Data. Berlin: Springer.
68. Hall B, Birkmire RW, Phillips JE, Meakin JD. 1981. 10% conversion efficiency in thin-film polycrystalline (CdZn)S/Cu2S solar cells. Proc. IEEE Photovolt. Spec. Conf., 15th, Orlando, p. 777.
69. Castel ED, Soubeyrand MJ. 1981. Investigation of the reliability of sprayed backwall Cu2S/CdS solar cells for terrestrial applications. Proc. IEEE Photovolt. Spec. Conf., 15th, Orlando, pp. 772-74.
70. Bloss WH, Pfisterer F, Schock HW. 1988. Polycrystalline II-VI related thin film solar cells. In Advances in Solar Energy, Vol. 4, ed. KWB̈ oer, pp. 201-304. New York: Plenum.
71. Spagnoli D, Refson K, Wright K, Gale JD. 2010. Density functional theory study of the relative stability of the iron disulfide polymorphs pyrite and marcasite. Phys. Rev. B 81:094106.
72. Sato K. 1986. Pyrite type compounds: with particular reference to optical characterization. Prog. Cryst. Growth Charact. Mater. 11:109-54. (Pubitemid 16612000)
73. de las Heras C, Lifante G. 1997. Optical parameters of pyrite thin films. J. Appl. Phys. 82:5132-37. (Pubitemid 127560243)
74. Lichtenberger D, Ellmer K, Schieck R, Fiechter S, Tributsch H. 1994. Structural, optical and electricalproperties of polycrystalline iron pyrite layers deposited by reactive DC magnetron sputtering. Thin Solid Films 246:6-12.
75. Takahashi AR, Nakatani Y, Yatomi T, Nakamura T. 2003. Growth of single-crystal pyrite films by atmospheric pressure chemical vapor deposition. Chem. Mater. 15:1763-65.
76. Birkholz M, Fiechter S, Hartmann A, Tributsch H. 1991. Sulfur deficiency in iron pyrite (FeS2?x) and its consequences for band-structure models. Phys. Rev. B 43:11926-36.
77. Buker K, Alonsovante N, Tributsch H. 1992. Photovoltaic output limitation of n-FeS2 (pyrite) Schottky barriers: a temperature-dependent characterization. J. Appl. Phys. 72:5721-28.
78. Thomas B, Diesner K, Cibik T, Ellmer K. 1996. Phase transitions during the deposition of polycrystalline iron pyrite (FeS2): layers by low-pressure metalorganic chemical vapor deposition. In Polycrystalline Semiconductors IV: Physics, Chemistry and Technology, ed. S Pizzini, HP Strunk, JHWerner, pp. 301-6. Z̈ urich: Trans Tech. (Pubitemid 126601998)
79. Green MA. 1982. Accuracy of analytical expressions for solar cell fill factors. Solar Cells 7:337-60.
80. Dholakia DA, Solanki GK, Patel SG, AgarwalMK. 2003. Optical band gap studies of tungsten sulphoselenide single crystals grown by a DVT technique. Sci. Iran. 10:373-82. (Pubitemid 38329809)
81. Jaeger-Waldau A, Lux-Steiner M, Bucher E. 1994. MoS2, MoSe2, WS2 andWSe2 thin films for photovoltaics. Solid State Phenom. 37:479-84.
82. Thomalla M, Tributsch H. 2006. Photosensitization of nanostructured TiO2 with WS2 quantum sheets. J. Phys. Chem. B 110:12167-71. (Pubitemid 44024842)
83. Splendiani A, Sun LY, Zhang Y, Li T, Kim J, et al. 2010. Emerging photoluminescence in monolayer MoS2. Nano Lett. 10:1271-75.
84. Sakurai K, Hunger R, Scheer R, Kaufmann CA, Yamada A, et al. 2004. In situ diagnostic methods for thin-film fabrication: utilization of heat radiation and light scattering. Prog. Photovolt. 12:219-34. (Pubitemid 38460414)
85. Repins IL, Fisher D, Batchelor WK, Woods LM, Beck ME. 2005. A non-contact low-cost sensor for improved repeatability in co-evaporated CIGS. Prog. Photovolt. 13:311-23.
86. Klenk R, Blieske U, Dieterle V, Ellmer K, Fiechter S, et al. 1997. Properties of CuInS2 thin films grown by a two-step process without H2S. Solar Energy Mater. Solar Cells 49:349-56. (Pubitemid 127396836)
87. Hibberd CJ, Chassaing E, Liu W, Mitzi DB, Lincot D, Tiwari AN. 2010. Non-vacuum methods for formation of Cu(In, Ga)(Se, S)2 thin film photovoltaic absorbers. Prog. Photovolt. 18:434-52.
88. Habas SE, Platt HAS, van Hest M, Ginley DS. 2010. Low-cost inorganic solar cells: from ink to printed device. Chem. Rev. 110:6571-94.
89. Weber A, Mainz R, Unold T, Schorr S, Schock HW. 2009. In-situ XRD on formation reactions of Cu2ZnSnS4 thin films. Phys. Status Solid. C 6:1245-48