Crystal-plasticity finite-element analysis of inelastic behavior during unloading in a magnesium alloy sheet

International Journal of Plasticity

Volumn 27, Issue 7, 2011, Pages 1072-1092

  Hama, Takayuki ^a,b   Takuda, Hirohiko ^a  

^a KYOTO UNIVERSITY   (Japan)

^b RIKEN   (Japan)

Author keywords

B. Crystal plasticity; B. Cyclic loading; B. Polycrystalline material; C. Finite elements; Magnesium

Indexed keywords

B. POLYCRYSTALLINE MATERIAL; BASAL SLIP; C. FINITE ELEMENTS; CRYSTAL PLASTICITY; CYCLIC LOADINGS; FINITE ELEMENT ANALYSIS; INELASTIC BEHAVIOR; INELASTIC RESPONSE; INHOMOGENEITIES; MAGNESIUM ALLOY SHEETS; NON-BASAL SLIP SYSTEMS; NUMERICAL TESTS; PRISMATIC SLIP; RANDOM ORIENTATIONS; STRESS LEVELS; UNIAXIAL TENSIONS;

CERIUM ALLOYS; FINITE ELEMENT METHOD; LOADING; MAGNESIUM; MAGNESIUM ALLOYS; MAGNESIUM PRINTING PLATES; PLASTICITY; POLYCRYSTALLINE MATERIALS; SINGLE CRYSTALS; STRESS ANALYSIS;

UNLOADING;

EID: 79955868548     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2010.11.004     Document Type: Article

References (62)

1. S.R. Agnew, C.N. Tomé, D.W. Brown, T.M. Holden, and S.C. Vogel Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling Scripta Materialia 48 2003 1003 1008
2. S.R. Agnew, and Ö. Duygulu Plastic anisotropy and the role of nonbasal slip in magnesium alloy AZ31B International Journal of Plasticity 21 2005 1161 1193 (Pubitemid 40134420)
3. R.J. Asaro, and A. Needleman Texture development and strain hardening in rate dependent polycrystals Acta Metallurgica 33 1985 923 953 (Pubitemid 15565280)
4. C. Bruni, A. Forcellese, F. Gabrielli, and M. Simoncini Air bending of AZ31 magnesium alloy in warm and hot forming conditions Journal of Materials Processing Technology 177 2006 373 376 (Pubitemid 44056215)
5. C.H. Cáceres, T. Sumitomo, and M. Veidt Pseudoelastic behavior of cast magnesium AZ91 alloy under cyclic loading-unloading Acta Materialia 51 2003 6211 6218
6. F.K. Chen, and T.B. Huang Formability of stamping magnesium-alloy AZ31 sheets Journal of Materials Processing Technology 142 2003 643 647
7. F.K. Chen, T.B. Huang, and C.K. Chang Deep drawing of square cups with magnesium alloy AZ31 sheets International Journal of Machine Tools & Manufacture 43 2003 1553 1559
8. G.Y. Chin, W.F. Hosford, and D.R. Mendorf Accommodation of constrained deformation in f.c.c. metals by slip and twinning Proceedings of the Royal Society A 309 1969 433 456
9. Y. Chino, T. Furuta, M. Hakamada, and M. Mabuchi Fatigue behavior of AZ31 magnesium alloy produced by solid-state recycling Journal of Materials Research 41 2006 3229 3232
10. Y. Chino, J.S. Lee, K. Sassa, A. Kamiya, and M. Mabuchi Press formability of a rolled AZ31 Mg alloy sheet with controlled texture Materials Letters 60 2006 173 176 (Pubitemid 41568604)
11. Y. Chino, K. Sassa, A. Kamiya, and M. Mabuchi Stretch formability at elevated temperature of a cross-rolled AZ31 Mg alloy sheet with different rolling routes Materials Science and Engineering A 473 2008 195 200
12. Y. Chino, K. Kimura, and M. Mabuchi Twinning behavior and deformation mechanisms of extruded AZ31 Mg alloy Materials Science and Engineering A 486 2008 481 488 (Pubitemid 351606894)
13. S.-H. Choi, D.H. Kim, H.W. Lee, B.S. Seong, K. Piao, and R. Wagoner Evolution of the deformation texture and yield locus shape in an AZ31 Mg alloy sheet under uniaxial loading Materials Science and Engineering A 526 2009 38 49
14. B. Clausen, C.N. Tomé, D.W. Brown, and S.R. Agnew Reorientation and stress relaxation due to twinning: modeling and experimental characterization for Mg Acta Materialia 56 2008 2456 2468
15. R.M. Cleveland, and A.K. Ghosh Inelastic effects on springback in metals International Journal of Plasticity 18 2002 769 785
16. O. Diard, S. Leclercq, G. Rousselier, and G. Cailletaud Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity: application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries International Journal of Plasticity 21 2005 691 722
17. E. Doege, and K. Droder Sheet metal forming of magnesium wrought alloy - formability and process technology Journal of Materials Processing Technology 115 2001 14 19
18. E. Goo, T. Duerig, K. Melton, and R. Sinclair Mechanical twinning in Ti50Ni47Fe3 and Ti49Ni51 alloys Acta Metallurgica 33 1985 1725 1733
19. S. Graff, W. Brocks, and D. Steglich Yielding of magnesium: from single crystal to polycrystalline aggregates International Journal of Plasticity 23 2007 1957 1978 (Pubitemid 47496125)
20. T. Hama, T. Nagata, C. Teodosiu, A. Makinouchi, and H. Takuda Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces International Journal of Mechanical Sciences 50 2008 175 192
21. T. Hama, Y. Kariyazaki, K. Ochi, H. Fujimoto, and H. Takuda Springback characteristics of Magnesium alloy AZ31B in draw-bending Materials Transactions 51 4 2010 685 693
22. Hama, T.; Fujimoto, H.; Takuda, H.; 2010b. Crystal Plasticity finite element analysis of loading-unloading behavior in magnesium alloy sheet. In: Proceedings of NUMIFORM '10, Pohang, Korea, June, 2010, pp. 802-809 (CD-ROM).
23. J. Harder A crystallographic model for the study of local deformation processes in polycrystals International Journal of Plasticity 15 1999 605 624
24. E.R.W. Jones, and W. Munro The "elastic hysteresis" of uranium Journal of the Mechanics and Physics of Solids 1 1953 182 188
25. J. Kaneko, and M. Sugamata Mechanical properties and formability of magnesium alloy sheets Journal of Japan Institute of Light Metals 54 11 2004 484 492 (in Japanese) (Pubitemid 40108164)
26. M. Kawka, and A. Makinouchi Shell-element formulation in the static explicit FEM code for the simulation of sheet stamping Journal of Materials Processing Technology 50 1995 105 115
27. H.J. Kim, S.C. Choi, K.T. Lee, and H.Y. Kim Experimental determination of forming limit diagram and springback characteristics of AZ31B Mg alloy sheets at elevated temperatures Materials Transactions 49 5 2008 1112 1119
28. J. Koike Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature Metallurgical and Materials Transactions A 36 2005 1689 1696 (Pubitemid 41130343)
29. J. Koike Deformation mechanisms of magnesium alloys at ambient temperature Journal of Japan Institute of Light Metals 59 2009 272 276 (in Japanese)
30. T. Kuwabara, Y. Kumano, J. Ziegelheim, and I. Kurosaki Tension-compression asymmetry of phosphor bronze for electronic parts and its effect on bending behavior International Journal of Plasticity 25 2009 1759 1776
31. R.A. Lebensohn, and C.N. Tomé A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys Acta Metallurgica et Materialia 41 1993 2611 2624
32. S. Lee, Y.H. Chen, and J.Y. Wang Isothermal sheet formability of magnesium alloy AZ31 and AZ61 Journal of Materials Processing Technology 124 2002 19 24
33. Y.S. Lee, M.C. Kim, S.W. Kim, Y.N. Kwon, S.W. Choi, and J.H. Lee Experimental and analytical studies for forming limit of AZ31 alloy on warm sheet metal forming Journal of Materials Processing Technology 2007 103 107 (Pubitemid 46420649)
34. J. Lévesque, K. Inal, K.W. Neale, and R.K. Mishra Numerical modeling of formability of extruded magnesium alloy tubes International Journal of Plasticity 26 2010 65 83
35. Y. Li, and M. Enoki Recovery behavior of pure magnesium in cyclic compression-quick unloading-recovery process at room temperature investigated by AE Materials Transactions 49 2008 1800 1805
36. X.Y. Lou, M. Li, R.K. Boger, S.R. Agnew, and R.H. Wagoner Hardening evolution of AZ31B Mg sheet International Journal of Plasticity 23 2007 44 86 (Pubitemid 44404234)
37. L. Luo, and A.K. Ghosh Elastic and inelastic recovery after plastic deformation of DQSK steel sheet Journal of Engineering Materials and Technology 125 2003 237 246
38. G.E. Mann, T. Sumitomo, C.H. Cáceres, and J.R. Griffiths Reversible plastic strain during cyclic loading-unloading of Mg and Mg-Zn alloys Materials Science and Engineering A 456 2007 138 146 (Pubitemid 46444742)
39. T. Mayama, K. Aizawa, Y. Tadano, and M. Kuroda Influence of twinning deformation and lattice rotation on strength differential effect in polycrystalline pure magnesium with rolling texture Computational Materials Science 47 2009 448 455
40. B.L. Mordike, and T. Ebert Magnesium properties - applications - potential Materials Science and Engineering A 302 2001 37 45 (Pubitemid 32337786)
41. F. Morestin, and M. Boivin On the necessity of taking into account the variation in the Young modulus with plastic strain in elastic-plastic software Nuclear Engineering and Design 162 1996 107 116 (Pubitemid 126349415)
42. O. Muránsky, D.G. Carr, P. Sittner, and E.C. Oliver In situ neutron diffraction investigation of deformation twinning and pseudoelastic-like behavior of extruded AZ31 magnesium alloy International Journal of Plasticity 25 2009 1107 1127
43. E. Nakamachi, N.N. Tam, and H. Morimoto Multi-scale finite element analyses of sheet metals by using SEM-EBSD measured crystallographic RVE models International Journal of Plasticity 23 2007 450 489 (Pubitemid 44839137)
44. R. Pérez, J.A. Benito, and J.M. Prado Study of the inelastic response of TRIP steels after plastic deformation ISIJ International 45 2005 1925 1933 (Pubitemid 43285422)
45. D. Pierce, R.J. Asaro, and A. Needleman Material rate dependence and localized deformation in crystalline solids Acta Metallurgica 31 1983 1951 1976 (Pubitemid 14505740)
46. A. Prakash, S.M. Weygand, and H. Riedel Modeling the evolution of texture and grain shape in Mg alloy AZ31 using the crystal plasticity finite element method Computational Materials Science 45 2009 744 750
47. G. Proust, C.N. Tomé, A. Jain, and S.R. Agnew Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31 International Journal of Plasticity 25 2009 861 880
48. R.E. Reed-Hill, and W.D. Robertson Pyramidal slip in magnesium Transactions of Metallurgical Society of AIME 212 1958 256 259
49. R.E. Reed-Hill, E.P. Dahlberg, and W.A. Slippy Jr. Some anelastic effects in zirconium at room temperature resulting from prestrain at 77 K Transactions of the Metallurgical Society of AIME 233 1965 1766 1770
50. A.A. Salem, S.R. Kalidindi, and S.L. Semiatin Strain hardening due to deformation twinning in α-titanium: constitutive relations and crystal-plasticity modeling Acta Materialia 53 2005 3495 3502 (Pubitemid 40761052)
51. A. Staroselsky, and L. Anand A constitutive model for hcp materials deforming by slip and twinning: application to magnesium alloy AZ31B International Journal of Plasticity 19 2003 1843 1864
52. A. Styczynski, Ch. Hartig, J. Bohlen, and D. Letzig Cold rolling textures in AZ31 wrought magnesium alloy Scripta Materialia 50 2004 943 947
53. Y. Tadano Polycrystalline behavior analysis of pure magnesium by the homogenization method International Journal of Mechanical Sciences 52 2010 2010 257 265
54. W. Tang, S. Zhang, Y. Peng, and D. Li Simulation of magnesium alloy AZ31 sheet during cylindrical cup drawing with rate independent crystal plasticity finite element method Computational Materials Science 46 2009 393 399
55. C.N. Tomé, R.A. Lebensohn, and U.F. Kocks A model for texture development dominated by deformation twinning: application to zirconium alloys Acta Metallurgica et Materialia 39 1991 2667 2680
56. P.A. Turner, and C.N. Tomé A study of residual stresses in zircaloy-2 with rod texture Acta Metallurgica et Materialia 42 1994 4143 4153
57. P. Van Houtte Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning Acta Metallurgica 26 1978 591 604 (Pubitemid 8596512)
58. T. Walde, and H. Riedel Simulation of earing during deep drawing of magnesium alloy AZ31 Acta Materialia 55 2007 867 874 (Pubitemid 46027645)
59. X. Wu, S.R. Kalidindi, C. Necker, and A.A. Salem Prediction of crystallographic texture evolution and anisotropic stress-strain curves during large plastic strains in high purity α-titanium using a Taylor-type crystal plasticity model Acta Materialia 55 2007 423 432 (Pubitemid 44909597)
60. C.L. Xie, S. Ghosh, and M. Groeber Modeling cyclic deformation of HSLA steels using crystal plasticity Journal of Engineering Materials and Technology. Transactions of the ASME 126 2004 339 352 (Pubitemid 40122719)
61. F. Yoshida, and T. Uemori A model of large-strain cyclic plasticity and its application to springback simulation International Journal of Mechanical Sciences 45 2003 1687 1702
62. H. Yoshinaga, and R. Horiuchi On the nonbasal slip in magnesium crystals Transactions of the Japan Institute of Metals 5 1964 14 21