Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces

International Journal of Mechanical Sciences

Volumn 50, Issue 2, 2008, Pages 175-192

  Hama, Takayuki ^a,b   Nagata, Takashi ^b   Teodosiu, Cristian ^b,c   Makinouchi, Akitake ^b   Takuda, Hirohiko ^a  

^a KYOTO UNIVERSITY   (Japan)

^b INST OF PHYS AND CHEMICAL RESEARCH   (Japan)

^c CNRS   (France)

Author keywords

Contact; Finite element method; Quadratic polynomial patch; Sheet metal forming; Springback; Tool modeling

Indexed keywords

COMPUTER SIMULATION; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; METAL FORMING;

QUADRATIC POLYNOMIAL PATCH; SPRINGBACK; TOOL MODELING;

SHEET METAL;

EID: 38149102367     PISSN: 00207403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmecsci.2007.07.005     Document Type: Article

References (56)

1. Chu E., Shah K.N., Pourboghrat F., and Chandorkar K. Development/application of sheet metal forming technology at Alcoa. SAE SP 944 (1993) 199-211
2. Makinouchi A., Teodosiu C., and Nakagawa T. Advance in FEM simulation and its related technologies in sheet metal forming. CIRP Annals-Manufacturing Technology 47-2 (1998) 641-649
3. Tekkaya A.E. State-of-the-art of simulation of sheet metal forming. Journal of Materials Processing Technology 103 (2000) 14-22
4. Takamura M, Sunaga H, Makinouchi A. On sheet forming simulation considering the elastic deformation of tools. In: Proceedings of the RIKEN symposium-the first integrated volume-CAD System Research, Wako, Japan, 2001. p. 88-95 [in Japanese].
5. Kawka M., and Makinouchi A. Shell-element formulation in the static explicit FEM code for the simulation of sheet stamping. Journal of Materials Processing Technology 50 (1995) 105-115
6. Belytschko T., and Tsay C.S. A stabilization procedure for the quadrilateral plate element with one-point quadrature. International Journal for Numerical Methods in Engineering 19 (1983) 405-419
7. Zhang W, Hu Y. The restricted-freedom element for sheet forming analysis. In: Proceedings of the sixth NUMIFORM, Enschede, The Netherlands, 1998. p. 733-7.
8. Guo Y.Q., Gati W., Naceur H., and Batoz J.L. An efficient DKT rotation free shell element for springback simulation in sheet metal forming. Computers & Structures 80 (2002) 2299-2312
9. Yoon J.W., Pourboghrat F., Chung K., and Yang D.Y. Springback prediction for sheet metal forming process using a 3D hybrid membrane/shell method. International Journal of Mechanical Sciences 44 (2002) 2133-2153
10. Park D.W., and Oh S.I. A four-node shell element with enhanced bending performance for springback analysis. Computer Methods in Applied Mechanics and Engineering 193 (2004) 2105-2138
11. Bui Q.V., Papeleux L., and Ponthot J.P. Numerical simulation of springback using enhanced assumed strain elements. Journal of Materials Processing Technology 153-154 (2004) 314-318
12. Alves de Sousa R.J., Cardoso R.P.R., Fontes Valente R.A., Yoon J.W., Gracio J.J., and Natal Jorge R.M. A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness-Part II: nonlinear applications. International Journal for Numerical Methods in Engineering 67 (2006) 160-188
13. Alves de Sousa R.J., Yoon J.W., Cardoso R.P.R., Fontes Valente R.A., and Gracio J.J. On the use of a reduced enhanced solid-shell (RESS) element for sheet forming simulations. International Journal of Plasticity 23 (2007) 490-515
14. Gau J.T., and Kinzel G.L. A new model for springback prediction in which the Bauschinger effect is considered. International Journal of Mechanical Sciences 43 (2001) 1813-1832
15. Yoshida F., and Uemori T. A model of large-strain cyclic plasticity and its application to springback simulation. International Journal of Mechanical Sciences 45 (2003) 1687-1702
16. Geng L., and Wagoner R.H. Role of plastic anisotropy and its evolution on springback. International Journal of Mechanical Sciences 44 (2002) 123-148
17. Chun B.K., Kim H.Y., and Lee J.K. Modeling the Bauschinger effect for sheet metals-Part II: applications. International Journal of Plasticity 18 (2002) 597-616
18. Choi Y., Han C.S., Lee J.K., and Wagoner R.H. Modeling multi-axial deformation of planar anisotropic elasto-plastic materials-Part II: applications. International Journal of Plasticity 22 (2006) 1765-1783
19. Dongjuan Z., Zhenshan C., Xueyu R., and Yuqiang L. Sheet springback prediction based on non-linear combined hardening rule and Barlat89's yielding function. Computational Materials Science 38 (2006) 256-262
20. Oliveira M.C., Alves J.L., Chaparro B.M., and Menezes L.F. Study on the influence of work-hardening modeling in springback prediction. International Journal of Plasticity 23 (2007) 516-543
21. Haddag B., Balan T., and Abed-Meraim F. Investigation of advanced strain-path dependent material models for sheet metal forming simulations. International Journal of Plasticity 23 (2007) 951-979
22. Takamura M, Ohura K, Sunaga H, Kuwabara T, Makinouchi A, Teodosiu C. Sheet forming simulation using a static FEM program and considering the elastic deformation of tools. In: Proceedings of the eighth NUMIFORM, Columbus, USA, 2004. p. 940-5.
23. Keum YT, Ahn IH, Leen IK, Song MH, Kwon SO, Park JS. Simulation of stamping process of automotive panel considering die deformation. In: Proceedings of the sixth NUMISHEET, Detroit, USA, 2005. p. 90-5.
24. Santos A., and Makinouchi A. Contact strategies to deal with different tool descriptions in static explicit FEM for 3-D sheet-metal forming simulation. Journal of Materials Processing Technology 50 (1995) 277-291
25. Keum Y.T., Nakamachi E., Wagoner R.H., and Lee L.K. Compatible description of tool surfaces and FEM meshes for analyzing sheet forming operations. International Journal for Numerical Methods in Engineering 30 (1990) 1471-1502
26. Japanese Society of the Technology and Plasticity. Static FEM-sheet metal forming (2004), Corona Publishing Co. LTD, Tokyo 127-156 [in Japanese]
27. Nagata T. Simple local interpolation of surfaces using normal vectors. Computer Aided Geometric Design 22 (2005) 327-347
28. Meek D.S., and Walton D.J. On surface normal and Gaussian curvature approximations given data sampled from a smooth surface. Computer Aided Geometric Design 17 (2000) 521-543
29. Hallquist J.O., Goudreau G.L., and Benson D.J. Sliding interfaces with contact-impact in large-scale Lagrangian computations. Computer Methods in Applied Mechanics and Engineering 51 (1985) 107-137
30. Wang S.P., and Nakamachi E. The inside-outside contact search algorithm for finite element analysis. International Journal for Numerical Methods in Engineering 40 (1997) 3665-3685
31. Wang S., and Makinouchi A. Contact strategies for FEM simulation of the blow molding process. International Journal for Numerical Methods in Engineering 48 (2000) 501-521
32. Hama T, Asakawa M, Takamura M, Makinouchi A, Teodosiu C. A stable and fast new contact search algorithm for FEM simulation of metal forming process. In: Proceedings of the first JSME/ASME International Conference on Materials and Processing 2002 (M&P2002), Hawaii, USA, 2002. p. 367-72.
33. Hama T., Asakawa M., Takamura M., Makinouchi A., and Teodosiu C. Effect of force correction algorithm arising from change of tool normal on sheet metal forming simulation. JSME International Journal of Series A 48-4 (2005) 329-334
34. Parisch H. A consistent tangent stiffness matrix for three-dimensional non-linear contact analysis. International Journal for Numerical Methods in Engineering 28 (1989) 1803-1812
35. 1-interpolations for two-dimensional frictional contact problems. International Journal for Numerical Methods in Engineering 51 (2001) 1469-1495
36. Moriya T, Takahashi S. Development of evaluation methodology for surface deflection defects employing directed and ranged curvature difference. In: Proceedings of the eighth ICTP, Verona, Italy, 2005. CD-ROM.
37. Japanese Deep Drawing Research Group. Handbook of press forming severity. 2nd ed (1997), The Nikkan Kogyo Shimbun, LTD, Tokyo 171-250 [in Japanese]
38. Andersson A. Evaluation and visualization of surface defects-a numerical and experimental study on sheet-metal parts. In: Proceedings of the sixth NUMISHEET, Detroit, USA, 2005. p. 113-8.
39. Puso M.A., and Laursen T.A. A 3D contact smoothing method using Gregory patches. International Journal for Numerical Methods in Engineering 54 (2002) 1161-1194
40. n continuous modeling of smooth contact surfaces using NURBS and application to 2D problems. International Journal for Numerical Methods in Engineering 57 (2003) 2177-2203
41. Banu M., Takamura M., Hama T., Naidim O., Teodosiu C., and Makinouchi A. Simulation of springback and wrinkling in stamping of a dual-phase steel rail-shaped part. Journal of Materials Processing Technology 173-2 (2006) 178-184
42. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society of London A 193 (1948) 281-297
43. Dvorkin E.M., and Bathe K.J. A continuum mechanics based four-node shell element for general nonlinear analysis. Engineering Computation 1 (1984) 77-88
44. Yamada Y., Yoshimura N., and Sakurai T. Plastic stress-strain matrix and its application for the solution of elastic-plastic problems by the finite element method. International Journal of Mechanical Sciences 10 (1968) 343-354
45. Takamura M, Sunaga H, Kuwabara T, Makinouchi A. Springback simulation of automotive front fender panel in multi-operation stamping process using static-explicit FEM code. In: Proceedings of the fifth NUMISHEET, Jeju, Korea, 2002. p. 379-84.
46. Hama T., Hatakeyama T., Asakawa M., Amino H., Makinouchi A., Fujimoto H., et al. Finite-element simulation of the elliptical cup deep drawing process by sheet hydroforming. Finite Elements in Analysis and Design 43 (2007) 234-246
47. Yamamura N, Kuwabara T, Makinouchi A. Springback simulations for stretch-bending and draw-bending processes using the static explicit FEM code, with an algorithm for canceling non-equilibrated forces. In: Proceedings of the fifth NUMISHEET, Jeju, Korea, 2002. p. 25-30.
48. Belytschko T., Liu W.K., and Moran B. Nonlinear finite elements for continua and structures (2000), Wiley, New York 595-608
49. El-Abbasi N., and Meguid S.A. Large deformation analysis of contact in degenerate shell elements. International Journal for Numerical Methods in Engineering 43 (1998) 1127-1141
50. Takagi T. Lecture of algebra (1965), Kyoritsu Shuppan Co., Ltd., Tokyo 180-184 [in Japanese]
51. Neumark S. Solution of cubic and quartic equations (1965), Pergamon Press Ltd., Oxford 5-24
52. Kuwabara T, Seki N, Takahashi S. A rigorous numerical analysis of residual curvature of sheet metals subjected to bending-unbending under tension. In: Proceedings of the sixth ICTP, Nuremberg, Germany, 1999. p. 1071-6.
53. Kuwabara T., Seki N., and Takahashi S. Springback analysis of sheet metal subjected to biaxial stretch-bending-springback analysis of sheet metal IV. Journal of Japanese Society of the Technology and Plasticity 38 (1997) 582-586 [in Japanese]
54. Yoshida T., Katayama T., Hashimoto K., and Kuriyama Y. Shape control techniques for high strength steel in sheet metal forming. Nippon Steel Technical Report 88 (7) (2003) 27-32
55. Hama T., Takamura M., Teodosiu C., Makinouchi A., and Takuda H. Effect of tool modeling accuracy on sheet metal forming simulation. Key Engineering Materials 340-341 (2007) 743-748
56. Isogai E, Yoshida T, Suzuki N, Uenishi A, Kuriyama Y. Forming techniques and forming analysis on spring-back for high strength steel in sheet metal forming. In: Proceedings of the 24th IDDRG Biennial Congress, Besançon, France, 2005.