Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31

International Journal of Plasticity

Volumn 25, Issue 5, 2009, Pages 861-880

  Proust, Gwénaëlle ^a,b   Tomé, Carlos N ^a   Jain, Ashutosh ^c   Agnew, Sean R ^c  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

^b UNIVERSITY OF SYDNEY   (Australia)

^c University of Virginia   (United States)

Author keywords

Hardening; Hexagonal materials; Magnesium; Polycrystal modeling; Twinning

Indexed keywords

CHEMICAL ACTIVATION; CRYSTAL ORIENTATION; DISLOCATIONS (CRYSTALS); HARDENING; MAGNESIUM; MAGNESIUM ALLOYS; MAGNESIUM PRINTING PLATES; MECHANISMS; METALLIC MATRIX COMPOSITES; POLYCRYSTALS; POLYPROPYLENES;

COMPOSITE CHARACTERS; COMPRESSION AND TENSIONS; CRITICAL STRESS; DETWINNING; DISLOCATION PROPAGATION; DISLOCATION SLIPS; HALL-PETCH; HARDENING LAWS; HEXAGONAL MATERIALS; LOADING DIRECTIONS; MAGNESIUM ALLOY AZ31; MATRIXES; MECHANICAL BEHAVIORS; POLYCRYSTAL MODELING; ROOM TEMPERATURES; SLIP DEFORMATIONS; SLIP MECHANISMS; STRAIN PATHS; STRONG INTERACTIONS; TEXTURE EVOLUTIONS; TWIN BOUNDARIES; TWINNING AND DETWINNING; TWINNING MODES;

MATERIALS;

EID: 62249176200     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.05.005     Document Type: Article

References (57)

1. Agnew S.R., and Duygulu O. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B. International Journal of Plasticity 21 6 (2005) 1161
2. Agnew S.R., Brown D.W., and Tomé C.N. Validating a polycrystal model for the elasto-plastic response of magnesium alloy AZ31 Using in-situ neutron diffraction. Acta Matererialia 54 18 (2006) 4841-4852
3. Agnew S.R., Tomé C.N., Brown D.W., Holden T.M., and Vogel S.C. Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling. Scripta Materialia 48 8 (2003) 1003
4. Agnew S.R., Yoo M.H., and Tomé C.N. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y. Acta Materialia 49 20 (2001) 4277
5. Ando S., and Tonda H. Non-basal slips in magnesium and magnesium-lithium alloy single crystals. Materials Science Forum 350-351 (2000) 43-48
6. In: Avedesian M.M., and Baker H. (Eds). Magnesium and Magnesium Alloys. ASM Speciality Handbook (1999)
7. Barnett M.R. Twinning and the ductility of magnesium alloys. Part I: Tension twins. Materials Science and Engineering A, Structural Materials 464 1-2 (2007) 1-7
8. Barnett M.R. Twinning and the ductility of magnesium alloys. Part II. Contraction twins. Materials Science and Engineering A, Structural Materials 464 1-2 (2007) 8
9. Barnett M.R., Keshavarz Z., and Ma X. A semianalytical Sachs model for the flow stress of a magnesium alloy. Metallurgical and Materials Transactions A, Physical Metallurgy and Materials Science 37A 7 (2006) 2283
10. Basinski Z.S., Szczerba M.S., Niewczas M., Embury J.D., and Basinski S.J. Transformation of slip dislocations during twinning of copper-aluminum alloy crystals. Revue de Metallurgie Cahiers D'Informations Techniques 94 9 (1997) 1037-1044
11. Beyerlein I.J., and Tomé C.N. Modeling transients in the mechanical response of copper due to strain path changes. International Journal of Plasticity 23 4 (2007) 640-664
12. Brown D.W., Jain A., Agnew S.R., and Clausen B. Twinning and detwinning during cyclic deformation of Mg alloy AZ31B. Materials Science Forum 539-543 4 (2007) 3407
13. Caceres C.H., Sumitomo T., and Veidt M. Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading-unloading. Acta Materialia 51 (2003) 6211-6218
14. Capolungo, L., Beyerlein, I.J., in press. Nucleation and stability of twins in hcp metals. Physical Review B.
15. Cherkaoui M. Constitutive equations for twinning and slip in low-stacking-fault-energy metals: a crystal plasticity-type model for moderate strains. Philosophical Magazine 83 31-34 (2003) 3945-3958
16. Cherkaoui M., Berveiller M., and Sabar H. Micromechanical modeling of martensitic transformation induced plasticity (TRIP) in austenitic single crystals. International Journal of Plasticity 14 7 (1998) 597-626
17. Chino Y., Kimura K., Hakamada M., and Mabuchi M. Mechanical anisotropy due to twinning in an extruded AZ31 Mg alloy. Materials Science and Engineering A, Structural Materials 485 (2008) 311-317
18. Christian J.W., and Mahajan S. Deformation twinning. Progress in Materials Science 39 1-2 (1995) 1-157
19. Clausen B., Tomé C.N., Brown D.W., and Agnew S.R. Reorientation and stress relaxation due to twinning: modeling and experimental characterization for Mg. Acta Materialia 56 11 (2008) 2456-2468
20. Jain A., and Agnew S.R. Effect of twinning on the mechanical behavior of a magnesium alloy sheet during strain path changes. Magnesium Technology 2006 (2006) 219
21. Jain A., and Agnew S.R. Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet. Materials Science and Engineering A, Structural Materials 462 1-2 (2007) 29
22. Jain A., Duygulu O., Brown D.W., Tomé C.N., and Agnew S.R. Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet. Materials Science and Engineering A 486 1-2 (2008) 311-317
23. Jiang L., Jonas J.J., Luo A.A., Sachdev A.K., and Godet S. Twinning-induced softening in polycrystalline AM30 Mg alloy at moderate temperatures. Scripta Materialia 54 (2006) 771-775
24. Jiang L., Jonas J.J., Mishra R.K., Luo A.A., Sachdev A.K., and Godet S. Twinning and texture development in two Mg alloys subjected to loading along three different strain paths. Acta Materialia 55 11 (2007) 3899
25. Kalidindi S.R. Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals. International Journal of Plasticity 17 6 (2001) 837-860
26. Karaman I., Sehitoglu H., Beaudoin A.J., Chumlyakov Y.I., Maier H.J., and Tomé C.N. Modeling the deformation behavior of Hadfield steel single and polycrystals due to twinning and slip. Acta Materialia 48 (2000) 2031-2047
27. Kaschner G.C., Bingert J.F., Liu C., Lovato M.L., Maudlin P.J., Stout M.G., and Tomé C.N. Mechanical response of zirconium - II. Experimental and finite element analysis of bent beams. Acta Materialia 49 (2001) 3097-3108
28. Kelley E.W., and Hosford W.F.J. The deformation characteristics of textured magnesium. Transactions of the Metallurgical Society of AIME 242 (1968) 654-660
29. Kleiner S., and Uggowitzer P.J. Mechanical anisotropy of extruded Mg-6% Al-1% Zn alloy. Materials Science and Engineering A, Structural Materials 379 1-2 (2004) 258
30. Klimanek P., and Potzsch A. Microstructure evolution under compressive plastic deformation of magnesium at different temperatures and strain rates. Materials Science and Engineering A, Structural Materials A324 1-2 (2002) 145
31. Koike J. Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature. Metallurgical and Materials Transactions A 36A (2005) 1689-1696
32. Kubler R., Berveiller M., Cherkaoui M., and Inal K. Transformation textures in unstable austenitic steel. Journal of Engineering Materials and Technology 125 (2003) 12-17
33. Lebensohn R.A., and Tomé C.N. Self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys. Acta Metallurgica et Materialia 41 9 (1993) 2611-2624
34. Lou X.Y., Li M., Boger R.K., Agnew S.R., and Wagoner R.H. Hardening evolution of AZ31B Mg sheet. International Journal of Plasticity 23 1 (2007) 44
35. Mann G.E., Sumitomo T., Caceres C.H., and Griffiths J.R. Reversible plastic strain during cyclic loading-unloading of Mg and Mg-Zn alloys. Materials Science and Engineering A, Structural Materials 456 1-2 (2007) 138
36. Mendelson S. Dislocation dissociations in hcp metals. Journal of Applied Physics 41 2 (1970) 1893-1910
37. Morozumi S., Kikuchi M., and Yoshinaga H. Electron microscope observation in and around (1 1 0 2) twins in magnesium. Transactions of the Japan Institute of Metals 17 3 (1976) 158-164
38. Obara T., Yoshinga H., and Morozumi S. {1 1 -2 2}〈-1 -1 2 3〉 slip system in magnesium. Acta Metallurgica 21 (1973) 845-853
39. Philippe M.J., Serghat M., Van Houtte P., and Esling C. Modelling of texture evolution for materials of hexagonal symmetry - II. Application to zirconium and titanium α or near α alloys. Acta Metallurgica et Materialia 43 4 (1995) 1619-1630
40. Pond R.C., Serra A., and Bacon D.J. Dislocations in interfaces in the hcp metals - II. Mechanisms of defect mobility under stress. Acta Materialia 47 5 (1999) 1441-1453
41. Proust G., Tomé C.N., and Kaschner G.C. Modeling texture, twinning and hardening evolution during deformation of hexagonal materials. Acta Materialia 55 (2007) 2137-2148
42. Salem A.A., Kalidindi S.R., and Doherty R.D. Microstructure evolution and strain hardening mechanisms in titanium. Acta Materialia (2003)
43. Salem A.A., Kalidindi S.R., and Semiatin S.L. Strain hardening due to deformation twinning in α-titanium: constitutive relations and crystal-plasticity modeling. Acta Materialia 53 (2005) 3495-3502
44. Schmid E., and Boas W. Plasticity of Crystals (1968), Chapman & Hall Ltd., London pp. 55-76
45. Serra A., and Bacon D.J. Computer simulation of screw dislocation interactions with twin boundaries in hcp metals. Acta Metallurgica et Materialia 43 12 (1995) 4465-4481
46. Serra A., and Bacon D.J. A new model for {1 0 -1 2} twin growth in hcp metals. Philosophical Magazine A 73 2 (1996) 333-343
47. Serra A., Bacon D.J., and Pond R.C. Twins as barriers to basal slip in hexagonal-close-packed metals. Metallurgical and Materials Transactions A 33 (2002) 809-812
48. Staroselsky A., and Anand L. A constitutive model for hcp materials deforming by slip and twinning: application to magnesium alloy AZ31B. International Journal of Plasticity 19 10 (2003) 1843
49. Stohr J.-F., and Poirier J.-P. Etude en microscopie electronique du glissement pyramidal {1 1 -2 2}〈1 1 -2 3〉 dans le magnesium. Philosophical Magazine 25 6 (1972) 1313-1329
50. Tomé C.N., and Kaschner G.C. Modeling texture, twinning and hardening evolution during deformation of hexagonal materials. Materials Science Forum (2005) 1001-1497
51. Tomé C.N., Lebensohn R.A., and Kocks U.F. A model for texture development dominated by deformation twinning: application to zirconium alloys. Acta Metallurgica et Materialia 39 11 (1991) 2667-2680
52. Tomé C.N., Maudlin P.J., Lebensohn R.A., and Kaschner G.C. Mechanical response of zirconium - I. Derivation of a polycrystal constitutive law and finite element analysis. Acta Materialia 49 15 (2001) 3085-3096
53. Van Houtte P. Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning. Acta Metallurgica et Materialia 26 4 (1978) 591-604
54. Wang Y.N., and Huang J.C. The role of twinning and untwinning in yielding behavior in hot-extruded Mg-Al-Zn alloy. Acta Materialia 55 3 (2007) 897
55. Ward-Flynn P., Mote J., and Dorn J.E. On the thermally activated mechanism of prismatic slip in magnesium single crystals, Trans. TMS-AIME 221 (1961) 1148-1154
56. Wu, L., Agnew, S.R., Brown, D.W., Stoica, G.M., Clausen, B., Jain, A., Fielden, D.E., Liaw, P.K., in press. Internal-stress relaxation and load redistribution during the twinning-detwinning dominated cyclic deformation of a wrought magnesium alloy, ZK60A. Acta Materialia.
57. Wu X., Kalidindi S.R., Necker C., and Salem A.A. Prediction of crystallographic texture evolution and anisotropic stress-strain curves during large plastic strains in high purity a-titanium using a Taylor-type crystal plasticity model. Acta Materialia 55 (2007) 423-432