Modeling cyclic deformation of HSLA steels using crystal plasticity

Journal of Engineering Materials and Technology

Volumn 126, Issue 4, 2004, Pages 339-352

  Xie, C L ^a   Ghosh, S ^a   Groeber, M ^a  

^a Ohio State University   (United States)

Author keywords

Constitutive Equation; Crystalline Plasticity; Cyclic Deformation; Misorientation; Parameter Calibration

Indexed keywords

CALIBRATION; CRYSTALS; CYCLIC LOADS; DEFORMATION; FINITE ELEMENT METHOD; IMAGING TECHNIQUES; MECHANICAL TESTING; MICROSCOPIC EXAMINATION; PLASTICITY; STRENGTH OF MATERIALS;

CONSTITUTIVE EQUATIONS; CRYSTALLINE PLASTICITY; CYCLIC DEFORMATION; MISORIENTATION; PARAMETER CALIBRATION;

STEEL;

EID: 12344329546     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1789966     Document Type: Article

References (46)

1. ASM Metals Handbook, 1992, Properties and Selected Sections of Iron and Steels, 10th ed., Vol. 1, Metal Parks, Ohio.
2. Suresh, S., 1991, Fatigue of Materials, Cambridge University Press. Cambridge.
3. Williams, C. R., Lee, Y.-L., and Rilly, J. T., 2003, "A Practical Method for Statistical Analysis of Strain-Life Fatigue Data," Int. J. Fatigue, 25, pp. 427-436.
4. Lin, S.-K., Lee, Y.-L., and Lu, M. W., 2001, "Evaluation of the staircase and the accelerated test methods for fatigue limit distributions," Int. J. Fatigue, 23, pp. 75-83.
5. Chan, K. S., Pan, Y. M., Davidson, D., and McClung, R. C., 1997, "Fatigue Crack Growth Mechanisms in HSLA-80 Steels," Mater. Sci. Eng., A, 222, pp. 1-8.
6. Kannan, K., and Hirth, J. P., 1998, "Mixed Mode Fracture Toughness and Low Cycle Fatigue Behavior in an HSLA-80 Steel," Scr. Mater., 39, pp. 743-748.
7. Chung, Y. W., and Lee, W. J., 1994, "Cyclic Plastic strain Energy as a Damage Criterion and Environmental Effect in Niobium-Bearing High Strength Low Alloy Steel," Mater. Sci. Eng., A, 186, pp. 121-128.
8. Roven, H. J., and Nes, E., 1991, "Cyclic Deformation of Ferritic Steel, 1. Stress-Strain Response and Structure Evolution," Acta Metall. Mater., 39, pp. 1719-1733.
9. Chaboche, J. L., 1991, "On Some Modifications of Kinematic Hardening to Improve the Description of Ratcheting Effects," Int. J. Plast., 7, pp. 661-678.
10. Toth, L. S., Molinari, A., and Zouhal, N., 2000, "Cyclic plasticity Phenomena as Predicted by Polycrystal Plasticity," Mech. Mater., 32, pp. 99-113.
11. Mika, D. P., and Dawson, P. R., 1998, "Effects of Grain Interaction on Deformation in Polycrystals," Mater. Sci. Eng., A, 257, pp. 62-76.
12. McDowell, D. L., Gall, K., Horstemeyer, M. F., and Fan, J., 2003, "Polycrystal Orientation Distribution Effects on Microslip in High Cycle Fatigue," Int. J. Fatigue, 25, pp. 27-39.
13. Morrissey, R. J., McDowell, D. L., and Nicholas, T., 2001, "Microplasticity in HCF of Ti-6Al-4V," Int. J. Fatigue, 23, pp. 55-64.
14. Turkmen, H. S., Dawson, P. R., and Miller, M. P., 2002, "The Evolution of Crystalline Stresses of A Polycrystalline Metal During Cyclic Loading," Int. J. Plast., 18, pp. 941-969.
15. Hasija, V., Ghosh, S., Mills, M. J., and Joseph, D. S., 2003, "Modeling Deformation and Creep in Ti-6Al alloys with Experimental Validation," Acta Mater., 51, pp. 4533-4549.
16. Mika, D. P., and Dawson, P. R., 1998, "Effects of Grain Interaction on Deformation in Polycrystals," Mater. Sci. Eng., A, 257, pp. 62-76.
17. Bunge, H. J., 1982, Texture Analysis in Material Science, Butterworths, London.
18. ASME Test Methods of Tension Testing of Metallic Materials, E8M-97, ASTM Book of Standards, Vol. 03.01, 3.1.
19. Yoshida, F., 2000, "A Constitutive Model of Cyclic Plasticity," Int. J. Plast., 16, pp. 359-380.
20. Yan, B., 1998, "Testing Procedures for Strain Controlled Fatigue Test (Supplement Instructions for A/S P Fatigue Program)," Daimler Chrysler work report.
21. Yoshida, F., Uemori, T., and Fujiwara, K., 2002, "Elastic-Plastic Behavior of Steel Sheets Under In-Plane Cyclic Tension-Compression at Large Strain," Int. J. Plast., 18, pp. 633-629.
22. Roger, R., and Wagoner, R. H., 2003, "Development of the Device for Reverse Testing of Sheet Material" (unpublished).
23. Balakrishnan, V., 1999, "Measurement of in-plane Bauschinger effect in metal sheets," M.S. thesis, Ohio State University.
24. Ohno, N., 1982, "A Constitutive Model of Cyclic Plasticity with a Non-Hardening Strain Range," ASME J. Appl. Mech., 49, pp. 721-727.
25. Balasubramanian, S., 1998, "Polycrystalline plasticity: Application to deformation processing of lightweight metals," Ph.D. dissertation, Cambridge, MA, MIT.
26. Kothari, M., and Anand, L., 1998, "Elasto-Viscoplastic Constitutive Equations for Polycrystalline Metals: Application to Tantalum," J. Mech. Phys. Solids, 46, pp. 51-83.
27. Peirce, D., Asaro, R. J., and Needleman, A., 1982, "An analysis of nonuniform and localized deformation in ductile single crystals," Acta Metall., 30, pp. 1087-1119.
28. Asaro, R. J., and Needleman, A., 1985, "Texture Development and Strain Hardening in Rate Dependent Polycrystals," Acta Mater., 33, pp. 923-953.
29. Frost, H. J. and Ashby, M. F., 1982, Deformation-Mechanism-Map, The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford.
30. Kocks, U. F., Argon, A. S., and Ashby, M. F., 1975, "Thermodynamics and Kinetics of Slip," Prog. Mater. Sci., 19, pp. 141-145.
31. Harder, J., 1999, "A Crystallographic Model for the Study of Local Deformation Processes in Polycrystals," Int. J. Plast., 15, pp. 605-624.
32. Cuitino, A. M., and Ortiz, M., 1993, "Computational Modeling of Single-crystals," Model. Simul. Sc., 1, pp. 225-263.
33. ABAQUS reference manuals, 2001, Providence (RI): Hibbitt, Karlsson and Sorenson, Inc.
34. Xie, C. L., and Nakamachi, E., 2002, "The Effect of Crystallographic Textures on the Formability of High-strength Steel Sheets," J. Mater. Process. Technol., 122, pp. 104-111.
35. CHANNEL5 manual, 2001, HKL Technology, pp. 397-340.
36. Carroll, D. L., 1996, "Chemical Laser Modeling with Genetic Algorithms," AIAA J., 34, pp. 338-346.
37. Jiang, R., and Sehitoglu, H., 1994, "Cyclic Ratcheting of 1070 Steel Under Multiaxial Stress States," Int. J. Plast., 10, pp. 579-608.
38. Jiang, Y., and Sehitoglu, H., 1994, "Multiaxial cyclic ratcheting under multiple step loading," Int. J. Plast., 10, pp. 849-870.
39. Ohno, N., and Wang, J.-D., 1993, "Kinematic Hardening Rules with Critical State of Dynamic Recovery, Part I: Formulation and Basic Features for Ratcheting Behavior, Part II: Application to Experiments of Ratcheting Behavior," Int. J. Plast., 9, pp. 375-403.
40. Xie, C. L., and Nakamachi, E., 2003, "Design of Texture for Improved Formability of High-strength Steel," Mater. Sci. Eng., A, 340, pp. 130-138.
41. Bennett, V. P., and McDowell, D. L., 2003, "Polycrystal Orientation Distribution Effects on Microslip in High Cycle Fatigue," Int. J. Fatigue, 25, pp. 27-39.
42. Kocks, U. F., Tomé, C. N., and Wenk, H. R., 1998, "Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties," Cambridge University Press, Cambridge.
43. Schmitz, H. A., Dew-Hughes, D., and Bilello, J. C., 1989, "Nucleation and Propagation of Cracks at GBs in Zinc Bicrystals," J. Mater. Res., 4, pp. 1182-1194.
44. Zikry, M. A., and Kao, M., 1996, "Inelastic Microstructural Failure Mechanisms in Crystalline Materials with High Angle Grain Boundaries," J. Mech. Phys. Solids, 44, pp. 1765-1798.
45. Fujita, H., and Miyazaki, S., 1978, "Lüders Deformation in Polycrystalline Iron," Acta Metall., 26, pp. 1273-1281.
46. Imamura, L., Hayakawa, H., and Taoka, T., 1971, "Contribution of Local Strain Rate at Lüders Band Front to Grain Size Dependence of Lower Yield Stress in Iron," Trans. Iron Steel Inst. Jpn., 11, pp. 191-200.