In situ neutron diffraction investigation of deformation twinning and pseudoelastic-like behaviour of extruded AZ31 magnesium alloy

International Journal of Plasticity

Volumn 25, Issue 6, 2009, Pages 1107-1127

  Muransky O ^a   Carr, D G ^a   Sittner P ^b   Oliver, E C ^c  

^a AUSTRALIAN NUCLEAR SCIENCE AND TECHNOLOGY ORGANISATION   (Australia)

^b INSTITUTE OF PHYSICS   (Czech Republic)

^c RUTHERFORD APPLETON LABORATORY   (United Kingdom)

Author keywords

Deformation mechanism; Magnesium; Neutron diffraction; Pseudoelasticity; Twinning untwinning

Indexed keywords

ALLOYS; DEFORMATION; MAGNESIUM; MAGNESIUM ALLOYS; MAGNESIUM PRINTING PLATES; NEUTRON DIFFRACTION; NEUTRONS; STRAIN; UNLOADING;

AZ31 MAGNESIUM ALLOYS; DEFORMATION MECHANISM; DEFORMATION TWINNINGS; DRIVING FORCES; IN-SITU NEUTRON DIFFRACTIONS; INTERNAL STRESS; LOADING-UNLOADING CYCLES; PEAK STRESS; POLYCRYSTALLINE ALLOYS; PSEUDOELASTIC; PSEUDOELASTICITY; STRESS STRAINS;

CERIUM ALLOYS;

EID: 63049139003     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.08.002     Document Type: Article

References (61)

1. Agnew S.R., Tomé C.N., Brown D.W., Holden T.M., and Vogel S.C. Study of slip mechanisms in a magnesium alloy by neutron diffraction and modelling. Scripta Materialia 48 8 (2003) 1003-1008
2. Agnew S.R., Brown D.W., and Tomé C.N. Validating a polycrystal model for the elastoplastic response of magnesium alloy AZ31 using in situ neutron diffraction. Acta Materialia 54 18 (2006) 4841-4852
3. Agnew S.R., Mehrotra P., Lillo T.M., Stoica G.M., and Liaw P.K. Texture evolution of five wrought magnesium alloys during route A equal channel angular extrusion: experiments and simulations. Acta Materialia 53 1-2 (2005) 3135-3146
4. Agnew S.R., and Duygulu O. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B. International Journal of Plasticity 21 (2005) 1161-1193
5. Agnew S.R., Yoo M.H., and Tomé C.N. Application of texture simulation to understanding mechanical behaviour of Mg and solid solution alloy containing Li or Y. Acta Materialia 49 20 (2001) 4277-4289
6. Barnett M.R., Keshavarz Z., Beer A.G., and Atwell D. Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn. Acta Materialia 52 (2004) 5093-5103
7. Barnett M.R. Twinning and the ductility of magnesium alloys: Part I: "tension" twins. Materials Science and Engineering A 1-2 464 (2007) 1-7
8. Barnett M.R. Twinning and the ductility of magnesium alloys: Part II. "Contraction" twins. Materials Science and Engineering A 464 1-2 (2007) 8-16
9. Basinski Z.S., and Szczerba M.S. Transformation of slip dislocations during twinning of copper-aluminium alloy crystals. Devue de Metallurgie. Cahiers D'Inforamtions Techniques 94 9 (1997) 1037-1044
10. Bohlen J., Nurnberg M.R., Senn J.W., Letzig D., and Agnew S.R. The texture and anisotropy of magnesium-zinc-rare earth alloy sheets. Acta Materialia 55 6 (2007) 2101-2112
11. Brown D.W., Agnew S.R., Bourke M.A.M., Holden T.M., and Vogel S.C. Internal strain and texture evolution during deformation twinning in magnesium. Materials Science and Engineering A 399 1-2 (2005) 1-12
12. Brown D.W., Jain A., Agnew S.R., and Clausen B. Twinning and detwinning during cyclic deformation. Materials Science Forum 539-543 (2007) 3407
13. Carr D.G., Ripley M.I., Holden T.M., Brown D.W., and Vogel S.C. Residual stress measurements in a zircaloy-4 weld by neutron diffraction. Acta Materialia 52 14 (2004) 4083-4091
14. Cáceres C.H., Sumitomo T., and Veidt M. Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading-unloading. Acta Materialia 51 20 (2003) 6211-6218
15. Cazacu O., Plunkett B., and Frederic B. Orthotropic yield criterion for hexagonal closed packed metals. International Journal of Plasticity 22 (2006) 1171-1194
16. Clausen B., Lorentzen T., Bourke M.A.M., and Daymond M.R. Lattice strain evolution during uniaxial tensile loading of stainless steel. Materials Science and Engineering A 259 1 (1999) 17-24
17. Clausen B., Tomé C.N., Brown D.W., and Agnew S.R. Reorientation and stress relaxation due to twinning: modeling and experimental characterization for Mg. Acta Materialia 56 (2008) 2456-2468
18. Dann J.A., Daymond M.R., James J.A., Santisteban J.R., and Edwards L. A comparison between Engin and Engin-X, a new diffractometer optimized for stress measurement. Physica B: Condensed Matter 350 1-3 (2004) e511-e514
19. Daymond, M.R., 2007. Personal communication.
20. Daymond M.R. Insights into deformation mechanisms from in situ diffraction experiments. Acta Crystallographica A 61 (2005) c32
21. Daymond M.R., Tome C.N., and Bourke M.A.M. Measured and predicted intergranular strains in textured austenitic steel. Acta Materialia 48 (2000) 553-564
22. Dillamore I.L., Hazel R.J., Watson T.W., and Hadden P. An experimental study of the mechanical anisotropy of some common metals. International Journal of Mechanical Sciences 13 12 (1971) 1049-1061
23. Gharghouri, M.A., 1997. PhD Thesis, McMaster University, Ontario, Canada.
24. Gharghouri M.A., Weatherly C.G., and Embury J.D. Study of the mechanical properties of Mg-7.7 at.% Al by in situ neutron diffraction. Philosophical Magazine A 79 7 (1999) 1671-1695
25. Hosford W.F. The Mechanics of Crystals and Textured Polycrystals (1993), Oxford University Press, Oxford
26. Hutchings M.T., Withers P.J., Holden T.M., and Lorentzen T. Introduction to the Characterization of Residual Stress by Neutron Diffraction (2005), Taylor and Francis, New York
27. Hutchinson, J.W., 1970. Elastic-Plastic Behaviour of Polycrystalline Metals and Composites, Royal Society Publishing A319, pp. 247-272.
28. Graff S., Brocks W., and Steglich D. Yielding of magnesium: from single crystal to polycrystalline aggregates. International Journal of Plasticity 23 12 (2007) 1957-1978
29. Jiang L., Kpmas J.J., Luo A.A., Sachdev A.K., and Godet S. Influence of {10-12} extension twinning on the flow behaviour of AZ31 Mg alloy. Materials Science and Engineering A (2007) 302-309
30. Keshavarz Z., and Barnett M.R. In situ investigation of twinning behaviour in Mg-3Al-1Zn. Magnesium Technology 2005 (2005), TMS (The Mineral, Metals and Materials Society)
31. Keshavarz Z., and Barnett M.R. EBSD analysis of deformation modes in Mg-3Al-1Zn. Scripta Materialia 55 (2006) 915-918
32. Koike J. Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 36 7 (2005) 1689-1696
33. Karaman I., Sehitoglu H., Beaudoin A.J., Chumlyakov Y.I., Maier H.J., and Tomé C.N. Modeling the deformation behaviour of Hadfield steel single and polycrystals due to twinning and slip. Acta Materialia 48 9 (2000) 2031-2047
34. Kocks U.F., Tomé C.N., and Wenk H.-R. Texture and Anisotropy: Preferred Orientations in Polycrystals and their Effect on Materials Properties (1998), Cambridge University Press
35. Korsunsky A.M., Daymond M.R., and Wells K.E. The correlation between plastic strain and anisotropy strain in aluminium alloys polycrystals. Material Science and Engineering A 334 (2002) 41-48
36. Larson, A., Von Dreele, R.B., 1994. General Structure Analysis System (GSAS). Los Alamos National Laboratory Report LAUR 86748.
37. Lee M.-G., Wagoner R.H., Lee J.K., Chung K., and Kim H.Y. Constitutive modelling for anisotropic/asymmetric hardening behaviour of magnesium alloy sheets. International Journal of Plasticity 24 (2008) 542-582
38. Lou X.Y., Li M., Boger R.K., Agnew S.R., and Wagoner R.H. Hardening evolution of AZ31B Mg sheet. International Journal of Plasticity 23 (2007) 44-86
39. Mann G.E., Sumitomo T., Cáceres C.H., and Griffiths J.R. Reversible plastic strain during cyclic loading-unloading of Mg and Mg-Zn alloys. Materials Science and Engineering A 456 1-2 (2007) 138-146
40. Muránsky, O., Carr, D.G., Barnett, M.R., Oliver, E.C., Šittner, P., 2008a. Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg alloy in situ neutron diffraction and EPSC modelling. Materials Science and Engineering A, in press, doi:10.1016/j.msea.2008.07.031.
41. Muránsky O., Carr D.G., Šittner P., Oliver E.C., and Dobroň P. In-situ neutron diffraction studies of the pseudoelastic-like behaviur of hydrostatically extruded Mg-Al-Zn alloy. Material Science Forum 571-572 (2008) 107-112
42. Oliver E.C., Daymond M.R., and Withers P.J. Neutron diffraction study of extruded magnesium during cyclic and elevated temperatures loading. Materials Science Forum 490-491 (2005) 257-262
43. Pang J.W.L., Holden T.M., Wright J.S., and Mason T.E. The generation of intergranular strains in 309H stainless steel under uniaxial loading. Acta Materialia 48 5 (2000) 1131-1140
44. Proust G., Tomé C.N., and Kaschner G.C. Modeling texture, twinning and hardening evolution during deformation of hexagonal materials. Acta Materialia 55 (2007) 2137-2148
45. Reed-Hill R.E., and Robertson W.D. Additional modes of deformation twinning in magnesium. Acta Metallurgica 5 12 (1957) 717-727
46. Reed-Hill, R.E., 1964. Deformation twinning. In: TMS-AIME Conference, American Institute of Mining, Metallurgical and Petroleum Engineering, Inc., Great Britain, Gainesville Florida.
47. Reed-Hill R.E., and Abbaschian R. Deformation Twinning and Martensite Reaction - Physical Metallurgy Principles (1998), PWS Publishing Company, Boston
48. Santisteban J.R., Daymond M.R., Edwards L., and James J.A. ENGIN-X: a third-generation neutron strain scanner. Journal of Applied Crystallography 39 (2006) 812-825
49. Salem A.A., Kalidindi S.R., and Doherty R.D. Strain hardening of titanium: role of deformation twinning. Acta Materialia 51 (2003) 4225-4237
50. Salem A.A., Kalidindi S.R., and Semiatin S.L. Strain hardening due to deformation twinning in α-titanium: constitutive relations and crystal-plasticity modelling. Acta Materialia 53 (2005) 3495-3502
51. Staroselsky A., and Anand L. A constitutive model for hcp materials deforming by slip and twinning: application of magnesium alloy AZ31B. International Journal of Plasticity 19 (2003) 1843-1864
52. Šittner P., Lukáš P., Novák V., Daymond M.R., and Swallowe G.M. In situ neutron diffraction studies of martensitic transformations in NiTi polycrystals under tension and compression stress. Materials Science and Engineering A 378 1-2 (2004) 97-104
53. Toby B.H. EXPGUI, a graphical user interface for GSAS. Journal of Applied Crystallography 34 (2001) 210-213
54. Tomé C.N., Lebensohn R.A., and Kocks U.F. A model for texture development dominated by deformation twinning: application to zirconium alloys. Acta Metallurgica Materialia 39 11 (1991) 2667-2680
55. Turner P.A., and Tomé C.N. A study of residual stresses in zircaloy-2 with rode texture. Acta Metallurgica Materialia 42 12 (1994) 4143-4153
56. Zhou A.G., Basu S., and Barsoum M.W. Kinking nonlinear elasticity, damping and microyielding of hexagonal close-packed metals. Acta Materialia 56 1 (2008) 60-67
57. Walde T., and Hermann R. Simulation of earning during deep drawing of magnesium alloy AZ31. Acta Materialia 55 3 (2007) 867-874
58. Windsor C.G. Pulsed Neutron Scattering (1981), Taylor & Francis, London
59. Yoshinaga H., Obara T., and Morozumi S. Twinning deformation in magnesium compressed along the C-axis. Materials Science and Engineering 12 5-6 (1973) 255-264
60. Wu L., Agnew S.R., Brown D.W., Stoice G.M., Clausen B., Jain A., Fielden D.E., and Liew P.K. Twinning-detwinning behaviour during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A. Acta Materialia 56 4 (2008) 688-695 - appeared in the journal 4 months after submission of the present manuscript to Acta Materialia on 14th of August 2007
61. Wu L., Agnew S.R., Brown D.W., Stoice G.M., Clausen B., Jain A., Fielden D.E., and Liew P.K. Internal stress relaxation and load redistribution during the twinning-detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A. Acta Materialia 56 14 (2008) 3699-3707 - appeared in the journal 9 months after submission of the present manuscript to Acta Materialia on 14th of August 2007