Study of the inelastic response of TRIP steels after plastic deformation

ISIJ International

Volumn 45, Issue 12, 2005, Pages 1925-1933

  Perez R ^a   Benito, J A ^a   Prado, J M ^a  

^a UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

Author keywords

Dislocation structure; Springback; TRIP steels; Young's modulus

Indexed keywords

DISLOCATIONS (CRYSTALS); MICROSTRUCTURE; PLASTIC DEFORMATION; SHEET METAL; STEEL;

DISLOCATION STRUCTURE; SPRINGBACK; TRIP STEELS;

ELASTIC MODULI;

EID: 33344475832     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.45.1925     Document Type: Article

References (36)

1. Y. Sakuma, O. Matsumara and O. Takechi: Metall. Trans. A, 22 (1991), 489.
2. K. Sugimoto, N. Usui, M. Kobayashi and S. Hashimoto: ISIJ Int., 32 (1992), 1311.
3. P. J. Jacques, E. Girault, Ph. Harlet and F. Delannay: ISIJ Int., 41 (2001), 1061.
4. V.F. Zackay, E. R. Parker and R. Bush: Trans. ASM, 60 (1967), 252.
5. G. B. Olson, M. Cohen: Metall. Trans. A, 7 (1976), 1897.
6. W. Bleck: Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, ed. by B. C. de Cooman, Wissenschaftsverlag Mainz GmbH, Aachen, Germany, (2002), 13.
7. S. Kim, Ch. G. Lee, I. Choi and S. Lee: Metall. Trans. A, 32 (2001), 505.
8. S. Baik, S. Kim, Y. S. Jin and O. K won, ISIJ Int., 41 (2001), 290.
9. P. J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. Van Humbeck and F. Delannay: ISIJ Int., 41 (2001), 1068.
10. M. De Meyer, D. Vanderschueren and B. De Cooman: ISIJ Int., 39 (1999), 813.
11. Z. Zimniak: Proc. of the VI Conf. on Sheet Metal Forming, Nveva IPSA Editore, Palermo, (2003), 195
12. S. Thibaud, N. Boudeau and J. C. Gelin, Proc. of the VI Conf. on Sheet Metal Forming, Nveva IPSA Editore, Palermo, (2003), 155.
13. R. M. Cleveland and A. K. Ghosh, Int. J. of Plast., 18 (2002), 769.
14. J. A. Benito, J. Jorba and A. Roca: Mater. Sci. Forum, 426-432 (2003), 4435.
15. F. Morestin and M. Boivin: Nucl. Eng. Des., 162 (1996), 107.
16. K. Yamaguchi, H. Adachi and N. Takamura: Met. Mater., 4 (1998), 420.
17. H. M. Ledbetter and S. A. Kim: Mater. Sci. Eng. A, A101 (1988), 87.
18. J. A. Benito, J. A. Manero, J. Jorba and A. Roca: Metall. Mater. Trans A, accepted for publication.
19. A. K. Ghosh: Acta Metall., 28 (1980), 1443.
20. N. F. Mott: Philos. Mag., 43 (1952), 1151.
21. J. Friedel: Philos. Mag., 44 (1953), 444.
22. A. V.Granato and K. Lücke: J. Appl. Phys., 27 (1956), 283.
23. L. Luo and A. K. Ghosh: J. Eng. Mater. Technol., 125 (2003), 237
24. E. Girault, A. Mertens, P. Jacques, Y. Houbaert, B. Verlinden and J. Van Humbeck: Scr. Mater., 44 (2001), 885.
25. S. Traint, A. Pichler, K. Hauzenberger, P. Stiaszny and E. Ewald: Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, ed. by B. C. de Cooman, Wissenschaftsverlag Mainz GmbH, Aachen, Germany, (2002), 121.
26. E. Doege, S. Kulp and Ch. Sunderkötter: Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, ed. by B. C. de Cooman, Wissenschaftsverlag Mainz GmbH, Aachen, Germany, (2002), 347.
27. E. Girault, P. J. Jacques and Ph. Harlet: Mater. Charact., 40 (1998), 111.
28. B. D. Cullity: Elements of X-Ray Difraction, Addison-Wesley, Reading, MA, USA, (1956), 391.
29. Y. Lan, H. J. Klaar and W. Dahl: Metall. Trans. A, 23A (1992), 537.
30. F. B. Pickering: Physical Metallurgy and the Design of Steels, Applied Science Publishers Ltd., London, (1978), 10.
31. E. P. Papadakis, C. A. Stickels and R. C. Innes: SAE Trans. J. Mats. Manuf., 104 (1995), 830.
32. I. Fonseca, J. A. Benito, I. Mejia, A. Roca and J. Jorba: Rev. Metal. Madrid, 38 (2002), 249.
33. Y. Lan, H. J. Klaar and W. Dahl: Metall. Trans. A, 23A (1992), 545.
34. G. E. Dieter: Mechanical Metallurgy, McGraw-Hill, New York, USA, (1988), 201.
35. M. A. Meyers and K. K. Chawla: Mechanical Metallurgy, Prentice-Hall, New Jersey, USA, (1984), 398.
36. G. Langford and M. Cohen: Trans, ASM, 62 (1969), 623.