Monitoring and analysis of MRR-based feedrate optimization approach and effects of cutting conditions using acoustic sound pressure level in free-form surface milling

Scientific Research and Essays

Volumn 6, Issue 2, 2011, Pages 256-277

  Bagci, Eyup ^a  

^a NATIONAL METROLOGY INSTITUTE   (Turkey)

Author keywords

Feedrate optimization; FFT; Free form surfaces; Machining; MRR; Sculptured surface machining; Sound pressure level; Tool condition monitoring; Tool deflection

Indexed keywords

EID: 79953756487     PISSN: None     EISSN: 19922248     Source Type: Journal    
DOI: None     Document Type: Article

References (82)

1. Abu-Mahfouz I (2003). Drilling wear detection and classification using vibration signals and artificial neural network. Int. J. Mach. Tools Man., 43 (7): 707-720.
2. Alonso FJ Salgado DR (2005). Application of singular spectrum analysis to tool wear detection using sound signals. Proceedings of the IMechE J. Eng. Man., 219 (9): 703-710.
3. Anderson D (1988). Method for Monitoring Cutting Tool Wear During a Machining Operation. The Boeing Company. USA, USP. 04744242.
4. Bailey T, Elbestawi MA, El-Wardany TI, Fitzpatrick P (2002). Generic simulation approach for multi-axis machining, Part 2: model calibration and feed rate scheduling. ASME Trans J. Man. Sci Eng., 124: 634-42.
5. Banshoya K, Ohsaki H, Nagatomi K, Murase Y (1994). Relationship between cutting sound and tool wear in machine boring of wood and wood based materials. Mok. Gakkaishi., 40(4): 521-528.
6. Blum T, Insaki I (1990). Study on acoustic emission from the orthogonal cutting process. Trans. ASME J. Eng. Ind., 112 (3): 203-211.
7. Brophy C, Kelly K, Byrne G (2002). AI-based condition monitoring of the drilling process. J. Mater. Processing Technol., 124(3): 305-310.
8. Burke LI, Rangwala S (1991). Tool condition monitoring in metal cutting. A neural network approach. J. Intel. Man., 2(5): 269-280.
9. Byrne G, Dornfeld D, Inasaki I, Ketteles G, Knig W, Teti R (1995). Tool condition monitoring (TCM)-the status of research and industrial application. CIRP Annal., 44(2): 541-567.
10. Chen C, Lee S, Santamarina G (1994). An object-oriented manufacturing control system. J. Intel. Man., 5(5): 315-321.
11. Chen J, Huang Y, Chen M (2005). Feedrate optimization and tool profile modification for the high-efficiency ball-end milling process. Int J Mach Tools Manuf., 45: 1070-1076.
12. Chen JC (2000). An effective fuzzy-nets training scheme for monitoring tool breakage. J. Intel. Man., 11(1): 85-101.
13. Chen JC, Chen WL (1999). A tool breakage detection system using an accelerometer sensor. J. Intel. Man., 10(2): 187-197.
14. Cho DW, Lee SJ, Chu CN (1999). The state ofmachining processmonitoring research in Korea. Int. J. Mach. Tools Man., 39(11): 1697-1715.
15. Clark WI, Shih AJ, Hardin CW, Lemaster RL, McSpadden SB (2003). Fixed abrasive diamond wire machining-part I: process monitoring and wire tension force. Int. J. Mach. Tools Man., 43(5): 523-532.
16. Cook NH (1980). Tool Wear Sensors. Wear., 62: 49-57.
17. Cyra G, Tanaka C (2000). The effects of wood-fiber directions on acoustic emission in routing. Wood Sci. Technol., 34: 237-252.
18. Dan L, Mathew J (1990). Tool Wear and Failure Monitoring Techniques for Turning-A review. Int. J. Mach. Tools Man., 30: 579-598.
19. Delio T, Tlusty J, Smith S (1992). Use of audio signals for chatter detection and control. J. Eng. Ind., 114(2): 146-157.
20. Desforges X, Habbadi A, Geneste L, Soler F (2004). Distributed machining control and monitoring using smart sensors/actuators. J. Intel. Man.,15(1): 39-53.
21. Dornfeld DA (1992). Monitoring of machining process-literature review. CIRP Ann., 41(1): 93-96.
22. Franco-Gasca LA, Herrera-Ruiz G, Peniche-Vera R, Romero-Troncoso RJ, Leal-Tafolla W (2006). Sensorless tool failure monitoring system for drilling machines. Int. J. Mach. Tools and Man., 46(3-4): 381-386.
23. Fussell BK, Ersoy C, Jerard RB (1992). Computer Generated CNC Machining Feedrates. Proc. of the Japan-USA Symp. on Flexible Automation. CA., pp. 377-384.
24. Govekar E, Gradisek J, Grabec I (2000). Analysis of acoustic emission signals and monitoring of machining processes. Ultrasonics., 38(1-8): 598-603.
25. Haber RE, Jimenez JE, Peres CR, Alique JR (2004). An investigation of tool wear monitoring in a high-speed machining process. Sensors and Actuators A: Phys., 116(3): 539-545.
26. http://www.cgtech.com: Website of CGTech, USA.
27. http://www.ezcam.com
28. http://www.mastercam.com
29. http://www.powermill.com
30. http://www.vegacnc.com
31. Hutton DV, Yu Q (1990). On the effects of a built-up edge on acoustic emission in metal cutting. Trans. ASME J. Eng. Ind., 112 (3): 184-189.
32. Ip RWL, Lau HCW, Chan FTS (2003). An economical sculptured surface machining approach using fuzzy models and ball-nosed cutters. J. Mat. Proces. Technol., 138(1-3): 579-585.
33. Ip WLR (1998). A fuzzy basis material removal optimization strategy for sculptured surface machining using ball-nosed cutters. Int. J. Prod. Res., 36 (9): 2563-2571.
34. Iskra P, Tanaka C (2005). The influence of wood fiber direction, feed rate, and cutting width on sound intensity during routing. Holz als Roh-und Werkstoff., 63: 167-172.
35. Jang DJ, Kim KS, Jung JM (2000). Voxell-based virtual multi-axis machining. Int J Adv Manufact. Technol., 16(10): 709-713.
36. Jaromír A (2007). Machinability Assessment of an Eutectoid Steel by Measurement of Cutting Forces. J. Man. Eng., 3: 28-32.
37. Jemielniak K (1999). Commercial tool condition monitoring systems. Int. J. Adv. Man. Technol., 15: 711-721.
38. Jemielniak K (2006). Tool wear monitoring based on a non-monotonic signal feature. Proc. of the IMechE J. Eng. Man., 220 (2):163-170.
39. Jemielniak K, Kwiatkowski L, Wrzosek P (1998). Diagnosis of tool wear based on cutting forces and acoustic emission measures as inputs to a neural network. J. Intel. Man., 9: 447-455.
40. Kamguem R (2010). Qualite De Surface Et Emissions Acoustiques En Fraisage Haute Vitesse Des Alliages D'aluminium. Universite Du Quebec. MSc. Thesis. Canada.
41. Karlsson B, Karlsson N, Wide P (2000). A dynamic safety system based on sensor fusion. J. Intel. Man., 11(5): 475-483.
42. Karunakaran KP, Shringi R (2008). A solid model-based off-line adaptive controller for feed rate scheduling for milling process. J. Mater. Proces. Technol., 204(1-3): 384-396.
43. Kim SJ, Jung TS, Yang MY (2004). Feedrate optimization using CL surface. J. Korean Society Precision Eng., 21(4):39-47.
44. Kloypayan J, Lee YS (2002). Adaptive feedrate scheduling and material engagement analysis for high performance machining. Proc. of the IMECE-ASME.
45. Ko PL, Liu ZS, Cvitkovic R, Donovan M, Loewen R, Krishnapper G (1999). Tool wear monitoring for routing MDF. Proc. of the 14th Int. Wood Mach. Seminar., pp. 609-619.
46. Lan TS, Hsu KS (2007). The implementation of optimum MRR on digital PC-based lathe system. Int. J. Adv. Man. Technol., 35(3-4): 248-254.
47. Li Q, Budong Y, Shuting L (2008). Comparing and combining off-line feedrate rescheduling strategies in free-form surface machining with feedrate acceleration and deceleration. Rob. and Comput. Integr. Man., 24: 796-803.
48. Li ZZ, Zheng M, Zheng L, Wu ZJ, Liu DC (2003). A solid model-based milling process simulation and optimization system integrated with CAD/CAM. J. Mat. Proc. Technol.,138 (1-3): 513-517.
49. Lia W, Gonga W, Obikawab T, Shirakashic Y (2005). A method of recognizing tool-wear states based on a fast algorithm of wavelet transform. J. Mat. Proces. Technol.,170(1-2): 374-380.
50. Lin B, Zhu MZ, Yu SY, Zhu HT, Lin MX (2002). Study of synthesis identification in the cutting process with a fuzzy neural network. J. Mater. Proces. Technol., 129(1-3): 131-134.
51. Lu MC, Kannatey-Asibu E Jr (2000). Analysis of sound signal generation due to flank wear in turning. Int. ME2000 Congress and Exposition.
52. Masory O (1991). Monitoring machining processes using multi-sensor readings fused by artificial neural network. J. Mater. Proces. Technol., 28(1-2): 231-240.
53. Metal Carboloy Systems Department (1980). Milling Handbook of High Efficiency Metal Cutting. General Electric Company. USA.
54. Murata K, Nishimura K, Ikami Y, Ebihara M (1993). Sawing performances of band saws treated with new filling methods II. Power consumption in sawing, sawing accuracy, and roughness of sawn surface. Mokuzai Gakkaishi., 39(11): 1239-1245.
55. Naerheim Y, Lan MS (1988). Acoustic emission reveals information about the metal cutting process and tool wear. Proc. of the 16th NAMR Conference. SME. pp. 240-244.
56. Nagatomi K, Yoshida K, Banshoya K, Murase Y (1993). Recognition of wood cutting conditions through cutting sounds I. Effects of tool system's stiffness and tool wear on the generation of sound in cutting parallel to the grain. Mokuzai Gakkaishi., 39(11): 521-528.
57. Niranjan Prasad K, Ramamoorthy B (2004). Monitoring of flank wear of coated tools in high speed machining with a neural network ART2. Int. J. Mach. Tools Man., 44(12-13): 1311-1318.
58. Okafor C, Adetona O (1995). Predicting quality characteristics of endmilled parts based on multi-sensor integration using neural networks, individual effects of learning parameters and rules. J. Intel. Man., 6(6): 389-400.
59. Ouafi AE, Guillot M, Bedrouni A (2000). Accuracy enhancement of multi-axis CNC machines through on-line neurocompensation. J. Intel. Man., 11(6): 535-545.
60. Peng Y (2004). Intelligent condition monitoring using fuzzy inductive learning. J. Intel. Man., 15(3): 373-380.
61. Rangwala S, Dornfeld D (1990). Sensor integration using neural networks for intelligent tool condition monitoring. Trans. ASME J. Eng. Ind., 112(3): 219-228.
62. Salgado DR, Alonso FJ (2006). Tool wear detection in turning operations using singular spectrum analysis. J. Mater. Proces. Technol., 171 (3): 451-458.
63. Schaffer G (1983). The ears and eyes of CIM. Report No. 765. Am. Machinist, 127(7): 109-124.
64. Scheffer C, Kratz H, Heyns PS, Klocke F (2003). Development of a tool wear monitoring system for hard turning. Int. J. Mach. Tools Man., 43(10): 973-985.
65. Schmitz TL (2003). Chatter recognition by a statistical evaluation of the synchronously sampled audio signal. J. Sound Vibration., 262(3): 721-730.
66. Schmitz T, Davies M, Kennedy M (2001a). Tool point frequency response prediction for high-speed machining by RCSA. J. Man. Sci. Eng., 123: 700-707.
67. Schmitz TL, Medicus K, Dutterer B (2002). Exploring once-perrevolution audio signal variance as a chatter indicator. Mach. Sci. Technol., 6(2): 215-233.
68. Shawaky A, Rosenberger T, Elbestawi M (1998). In process monitoring and control of thickness error in machining hollows shafts. Mechatron, 8: 301-322.
69. Silva RG, Baker KJ, Wilcox SJ (2000). The adaptability of a tool wear monitoring system under changing cutting conditions. Mech. Syst. Signal Proces., 14 (2): 287-298.
70. Sokolowski A, Kosmol J (2001). Selected examples of cutting process monitoring and diagnostics. J. Mater. Proces. Technol., 113(1-3): 322-330.
71. Spence AD, Altintas Y (1994). A Solid Modeler Based Milling Process Simulation and Planning System. Trans. ASME., 116: 61-69.
72. Tanaka C, Nakao T, Takahashi A (1988). A new technique for adaptive control optimization in circular sawing. Mokuzai Gakkaishi., 34(9): 769-771.
73. Tanaka C, Nakao T, Takahashi A, Schniewind AP (1990). On-line control of feed-speed in circular sawing. Holz Roh-Werkstoff, 48: 139-145.
74. Tanaka C, Zhao C, Nakao T, Nishino Y, Takahashi A (1993). An adaptive control optimization for circular sawing. Forest Prod. J., 43(9): 61-65.
75. Tekiner Z, Yesilyurt S (2004). Investigation of the cutting parameters depending on process sound during turning of AISI 304 austenitic stainless steel. Mat. Design., 25: 507-513.
76. Teti R, Baciu IL (2004). Neural network processing of audible sound parameters for sensor monitoring of tool conditions. Intel. Comp. Man. Eng., 4: 385-390.
77. Teti R, Baciu IL, Rubio EM (2004). Neural network classification of audible sound signals for process monitoring during machining. Proc. of the 15th Int. DAAAM Symp.
78. Tlusty J, Andrew GC (1983). A critical review of sensors of unmanned machining. CIRP Ann., 32(1): 563-577.
79. Trabelsi H, Kannatey-Asibu, EJr (1991). Pattern-Recognition Analysis of Sound Radiation in Metal Cutting. Int. J. Adv. Man., Technol., 6: 220-231.
80. Wang WP (1988). Solid modeling for optimizing metal removal of threedimensional NC end-milling. J. Man. Sys., 7(1): 57-65
81. Weingaertner WL, Schroeter RB, Polli ML, Gomes J.de Oliveira (2006). Evaluation of high-speed end-milling dynamic stability through audio signal measurements. J. Mater. Proces. Technol., 179(1-3): 133-138.
82. Wilcos SJ, Reuben RL, Souquet P (1997). The use of cutting force and acoustic emission signals for the monitoring the tool insert geometry during rough face milling. Int. J. Mach. Tools Man., 32(4): 481-494.