Effects of bondline thickness on Mode-II interfacial laws of bonded laminated composite plate

International Journal of Fracture

Volumn 168, Issue 2, 2011, Pages 197-207

  Ji, Gefu ^a   Ouyang, Zhenyu ^b   Li, Guoqiang ^a,b  

^a Louisiana State University   (United States)

^b SOUTHERN UNIVERSITY   (United States)

Author keywords

Adhesively bonded joints; Cohesive strength; Cohesive zone model; Fracture; Laminated composite; Local interfacial test

Indexed keywords

ADHESIVE LAYERS; ADHESIVE THICKNESS; ADHESIVELY BONDED JOINTS; BONDLINE THICKNESS; COHESIVE STRENGTH; COHESIVE ZONE MODEL; COMPOSITE JOINT; CRITICAL ISSUES; DESIGN AND APPLICATION; EXPERIMENTAL STUDIES; INTERFACIAL BEHAVIORS; INTERFACIAL DELAMINATION; INTERFACIAL SHEAR STRENGTH; INTERFACIAL STRENGTH; INTERFACIAL TOUGHNESS; INTERFACIAL TRACTION; LAMINATED COMPOSITE PLATES; LOADING CONDITION; LOCAL INTERFACIAL TEST; LOCAL TESTS; MEASURED MODES; MODE II; NUMERICAL MODELING; SHEAR TESTS; TEST DATA; TEST RESULTS;

ADHESIVE JOINTS; COMPOSITE STRUCTURES; FRACTURE; LAMINATED COMPOSITES; LAMINATING; LUBRICATING GREASES; SHEAR STRENGTH; STRUCTURE (COMPOSITION); TESTING; TRACTION (FRICTION);

DELAMINATION;

EID: 79951682332     PISSN: 03769429     EISSN: 15732673     Source Type: Journal    
DOI: 10.1007/s10704-010-9571-9     Document Type: Article

References (57)

1. G Alfano MA Crisfield 2001 Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues Int J Numer Methods Eng 50 1701 1736 10.1002/nme.93 (Pubitemid 32281665)
2. T Andersson U Stigh 2004 The stress-elongation relation for an adhesive layer loaded in peel using equilibrium and energetic forces Int J Solids Struct 41 413 434 10.1016/j.ijsolstr.2003.09.039 (Pubitemid 38002908)
3. RH Andruet DA Dillard SM Holzer 2001 Two- and three-dimensional geometrical nonlinear finite elements for analysis of adhesive joints Int J Adhes Adhes 21 17 34 1:CAS:528:DC%2BD3MXkslersQ%3D%3D 10.1016/S0143-7496(00) 00024-5 (Pubitemid 32092915)
4. WE Bachrach THR Hicks ZS Habas DM Granata 1991 Mixed experimental- structural model for interlaminar shear fracture toughness J Aerosp Eng 4 108 125 10.1061/(ASCE)0893-1321(1991)4:1(108)
5. GI Barenblatt 1959 The formation of equilibrium cracks during brittle fracture, general ideas and hypothesis, axisymmetrical cracks J Appl Math Mech (PMM) 23 622 636 10.1016/0021-8928(59)90157-1 (English Translation)
6. JD Barrett RO Foschi 1977 Mode II stress-intensity factors for cracked wood beams Eng Fract Mech 9 371 378 10.1016/0013-7944(77)90029-7
7. IIC, of structural adhesive joints: an effective crack length approach Eng Fract Mech 72 877 897 10.1016/j.engfracmech.2004.08.007 (Pubitemid 40046799)
8. AJ Brunner 2000 Experimental aspects of mode I and mode II fracture toughness testing of fibre-reinforced polymer-matrix composites Comput Methods Appl Mech Eng 185 161 172 10.1016/S0045-7825(99)00257-1 (Pubitemid 30329690)
9. IC delamination tests on fibre composites Compos Sci Technol 66 785 795 10.1016/j.compscitech.2004.12.040 (Pubitemid 43329424)
10. GT Camacho M Ortiz 1996 Computational modeling of impact damage in brittle materials Int J Solids Struct 33 2899 2938 10.1016/0020-7683(95)00255-3 (Pubitemid 126377006)
11. LA Carlsson JW Gillespie RB Pipes 1986 On the analysis and design of the end notched flexure (ENF) specimen for mode II testing J Compos Mater 20 594 604 10.1177/002199838602000606 (Pubitemid 17497192)
12. H Chai 1988 Shear fracture Int J Fract 37 137 159 1:CAS:528: DyaL1cXltFamsL4%3D
13. H Chai 1995 Deformation and fracture of particulate epoxy in adhesive bonds Acta Metall Mater 43 163 172 1:CAS:528:DyaK2MXjtFKlsL0%3D
14. SR Chowdhury R Narasimhan 2000 A finite element analysis of stationary crack tip fields in a pressure sensitive constrained ductile layer Int J Solids Struct 37 3079 3100 10.1016/S0020-7683(99)00046-3 (Pubitemid 30557515)
15. A Corigliano 1993 Formulation, identification and use of interface models in the numerical analysis of composite delamination Int J Solids Struct 30 2779 2811 10.1016/0020-7683(93)90154-Y
16. BD Davidson X Sun 2005 Effects of friction, geometry and fixture compliance on the perceived toughness from three and four point bended notched flexure tests J Reinf Plast Compos 4 1611 1628 10.1177/0731684405050402 (Pubitemid 41498731)
17. BD Davidson X Sun A Vinciquerra 2007 Influences of friction, geometric nonlinearities, and fixture compliance on experimentally observed toughnesses from three and four-point bend end-notched flexure tests J Compos Mater 41 1177 1196 1:CAS:528:DC%2BD2sXnvVertr8%3D 10.1177/0021998306067304 (Pubitemid 46776315)
18. P Davies, et al. 1999 Comparison of test configurations for determination of mode II interlaminar fracture toughness results from international collaborative test programme Plast Rubber Compos 28 9 432 437 1:CAS:528:DC%2BD3cXhtVSqu78%3D (Pubitemid 30529901)
19. MFSF de Moura RDSG Campilho JPM Gonçalves 2009 Pure mode II fracture characterization of composite bonded joints Int J Solids Struct 46 1589 1595 10.1016/j.ijsolstr.2008.12.001
20. DS Dugdale 1960 Yielding of steel sheets containing slits J Mech Phys Solids 8 100 104 10.1016/0022-5096(60)90013-2
21. A Hillerborg M Modéer PE Petersson 1976 Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements Cem Concr Res 6 773 782 10.1016/0008-8846(76)90007-7
22. JL Högberg BF Sørensen U Stigh 2007 Constitutive behaviour of mixed mode loaded adhesive layer Int J Solids Struct 44 8335 8354 10.1016/j.ijsolstr.2007.06.014 (Pubitemid 47632565)
23. JW Hutchinson AG Evans 2000 Mechanics of materials: top-down approaches to fracture Acta Mater 48 125 135 1:CAS:528:DC%2BD3cXmtVCksw%3D%3D 10.1016/S1359-6454(99)00291-8 (Pubitemid 30558399)
24. T Ikeda A Yamashita D Lee N Miyazaki 2000 Failure of a ductile adhesive layer constrained by hard adherends J Eng Mater Technol 122 80 85 10.1115/1.482769
25. Ji G, Ouyang Z, Li G (2010) Effects of bondline thickness on Mode-I nonlinear interfacial fracture of laminated composites: an experimental study. Eng Fract Mech (under review)
26. MS Kafkalidis MD Thouless QD Yang SM Ward 2000 Deformation and fracture of adhesive layers constrained by plastically-deforming adherends J Adh Sci Technol 14 1593 1607 1:CAS:528:DC%2BD3MXit12ktb0%3D 10.1163/156856100742401 (Pubitemid 32286483)
27. AJ Kinloch SJ Shaw 1981 The fracture resistance of a toughened epoxy adhesive J Adh 12 59 77 1:CAS:528:DyaL3MXksVCjtr4%3D 10.1080/00218468108071189 (Pubitemid 11517702)
28. A Klarbring 1991 Derivation of a model of adhesively bonded joints by the asymptotic expansion method Int J Eng Sci 29 493 512 10.1016/0020-7225(91) 90090-P (Pubitemid 21651740)
29. DB Lee T Ikeda N Miyazaki NS Choi 2004 Effect of bond thickness on the fracture toughness of adhesive joints J Eng Mater Technol 126 14 18 1:CAS:528:DC%2BD2cXmslCqsg%3D%3D 10.1115/1.1631433
30. K Leffler KS Alfredsson U Stigh 2007 Shear behaviour of adhesive layers Int J Solids Struct 44 520 545 10.1016/j.ijsolstr.2006.04.036 (Pubitemid 44737498)
31. LD Lorenzis G Zavarise 2009 Cohesive zone modeling of interfacial stresses in plated beams Int J Solids Struct 46 4181 4191 10.1016/j.ijsolstr. 2009.08.010
32. KS Madhusudhana R Narasimhan 2002 Experimental and numerical investigations of mixed mode crack growth resistance of a ductile adhesive joint Eng Fract Mech 69 865 883 10.1016/S0013-7944(01)00110-2 (Pubitemid 34287378)
33. A Needleman 1987 A continuum model for void nucleation by inclusion debonding ASME J Appl Mech 54 525 531 10.1115/1.3173064
34. Z Ouyang G Li 2009 Nonlinear interface shear fracture of end notched flexure specimens Int J Solids Struct 46 2659 2668 10.1016/j.ijsolstr.2009.02. 011
35. Z Ouyang G Li 2009 Local damage evolution of DCB specimens during crack initiation process: a natural boundary condition based method ASME J Appl Mech 76 051003-1 051003-8 10.1115/1.3112742
36. Z Ouyang G Li 2009 Cohesive zone model based analytical solutions for adhesively bonded pipe joints under torsional loading Int J Solids Struct 46 1205 1217 10.1016/j.ijsolstr.2008.10.021
37. Z Ouyang G Li 2009 Interfacial debonding of pipe joints under torsion loads: a model for arbitrary nonlinear cohesive laws Int J Fract 155 19 31 10.1007/s10704-009-9318-7
38. Ouyang Z, Ji G, Li G (2010) On approximately realizing and characterizing pure Mode-I interface fracture between bonded dissimilar materials. ASME J Appl Mech (in press)
39. J Pan CKY Leung 2007 Debonding along the FRP-concrete interface under combined pulling/peeling effects Eng Fract Mech 74 132 150 10.1016/j. engfracmech.2006.01.022 (Pubitemid 44391184)
40. T Pardoen T Ferracin CM Landis F Delannay 2005 Constraint effects in adhesive joint fracture J Mech Phys Solids 53 1951 1983 1:CAS:528: DC%2BD2MXmt1Ghu7o%3D 10.1016/j.jmps.2005.04.009 (Pubitemid 40952689)
41. F Parrinello B Failla G Borino 2009 Cohesive-frictional interface constitutive model Int J Solids Struct 46 2680 2692 10.1016/j.ijsolstr.2009.02. 016
42. JR Rice 1968 A path independent integral and the approximate analysis of strain concentration by notches and cracks J Appl Mech 35 379 386
43. JH Rose JR Smith J Ferrante 1983 Universal features of bonding in metals Phys Rev B 28 1835 1845 1:CAS:528:DyaL3sXkvFCjsLY%3D 10.1103/PhysRevB.28.1835
44. Russell AJ (1982) On the measurement of mode II interlaminar fracture energies. Materials Report 82-0, Defence Research, Establishment Pacific, Victoria, British Columbia, Canada
45. Russel AJ, Street KN (1982) Factors affecting the interlaminar fracture energy of graphite/epoxy laminates. In: ICCM-IV, Tokyo, Japan
46. K Salomonsson T Andersson 2008 Modeling and parameter calibration of an adhesive layer at the meso level Mech Mater 40 48 65 10.1016/j.mechmat.2007.06. 004 (Pubitemid 47391054)
47. C Schuecker BD Davidson 2000 Evaluation of the accuracy of the four-point bend end-notched flexure test for the mode II delamination toughness determination Compos Sci Technol 60 2137 2146 10.1016/S0266-3538(00)00113-5
48. BF Sørensen 2002 Cohesive law and notch sensitivity of adhesive joints Acta Mater 50 1053 1061 10.1016/S1359-6454(01)00404-9 (Pubitemid 34181945)
49. V Tvergaard 1990 Effect of fibre debonding in a whisker-reinforced metal Mater Sci Eng A 125 203 213 10.1016/0921-5093(90)90170-8
50. V Tvergaard JW Hutchinson 1992 The relation between crack growth resistance and fracture process parameters in elastic-plastic solids J Mech Phys Solids 40 1377 1397 10.1016/0022-5096(92)90020-3
51. V Tvergaard JW Hutchinson 1994 Toughness of an interface along a thin ductile layer joining elastic solids Philos Mag 70 641 656 1:CAS:528: DyaK2cXmtlKjurg%3D 10.1080/01418619408242253
52. V Tvergaard JW Hutchinson 1996 On the toughness of ductile adhesive joints J Mech Phys Solids 44 789 800 1:CAS:528:DyaK28Xktlymu78%3D 10.1016/0022-5096(96)00011-7 (Pubitemid 126359302)
53. JG Williams H Hadavinia 2002 Analytical solutions for cohesive zone models J Mech Phys Solids 50 809 825 10.1016/S0022-5096(01)00095-3 (Pubitemid 34201323)
54. XP Xu A Needleman 1993 Void nucleation by inclusion debonding in a crystal matrix Model Simul Mater Sci Eng 1 111 132 10.1088/0965-0393/1/2/001
55. C Yan YW Mai L Ye 2001 Effect of bond thickness on fracture behaviour in adhesive joints J Adh 75 27 44 1:CAS:528:DC%2BD3MXivFOhsr8%3D 10.1080/00218460108029592 (Pubitemid 32514032)
56. Y Yan F Shang 2009 Cohesive zone modeling of interfacial delamination in PZT thin films Int J Solids Struct 46 2739 2749 1:CAS:528:DC%2BD1MXnt1yiurg%3D 10.1016/j.ijsolstr.2009.03.002
57. QD Yang MD Thouless SM Ward 2001 Elastic-plastic mode-II fracture of adhesive joints Int J Solids Struct 38 3251 3262 10.1016/S0020-7683(00)00221-3 (Pubitemid 32257377)