Cohesive zone modeling of interfacial stresses in plated beams

International Journal of Solids and Structures

Volumn 46, Issue 24, 2009, Pages 4181-4191

  De Lorenzis, Laura ^a   Zavarise, Giorgio ^a  

^a UNIVERSITY OF SALENTO   (Italy)

Author keywords

Cohesive zone modeling; Fiber reinforced polymer reinforcement; Interfacial stresses; Plate end debonding

Indexed keywords

ANALYTICAL PREDICTIONS; BONDED JOINT; CLOSED FORM SOLUTIONS; CLOSED-FORM EXPRESSION; COHESIVE LAWS; COHESIVE ZONE MODEL; COHESIVE ZONE MODELING; COHESIVE ZONES; COMPLEX FORMULATIONS; CONTACT ELEMENTS; DE-COHESION; ELASTIC ANALYSIS; ELASTIC RANGES; FIBER REINFORCED POLYMER REINFORCEMENT; FINITE ELEMENT MODELS; FIRST-ORDER; FIRST-ORDER ANALYSIS; HIGHER ORDER SOLUTIONS; INTERFACIAL SHEAR; INTERFACIAL SHEAR STRESS; INTERFACIAL STRESS; INTERFACIAL STRESSES; LINEAR-ELASTIC FRACTURE MECHANICS; MODE II; NORMAL STRESS; PLATE END DEBONDING; PLATED BEAMS; PREDICTIVE MODELS; UNIFIED FRAMEWORK;

FIBER REINFORCED PLASTICS; FORECASTING; FRACTURE MECHANICS; REINFORCED PLASTICS; REINFORCEMENT;

DEBONDING;

EID: 70349750177     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2009.08.010     Document Type: Article

References (51)

1. Au C., and Buyukozturk O. Debonding of FRP plated concrete: a tri-layer fracture treatment. Eng. Fract. Mech. 73 3 (2006) 348-365
2. Barenblatt G.I. The formation of equilibrium cracks during brittle fracture. General ideas and hypothesis. Axisymmetrical Cracks. J. Appl. Math. Mech. (PMM) 23 (1959) 434-444
3. Carpinteri A., Lacidogna G., and Paggi M. Acoustic emission monitoring and numerical modelling of FRP delamination in RC beams with non-rectangular cross-section. RILEM Mater. Struct. 40 (2007) 553-566
4. Chen J.F., and Teng J.G. Anchorage strength models for FRP and steel plates bonded to concrete. J. Struct. Eng., ASCE 127 7 (2001) 784-791
5. Chen J.F., Teng J.G. (Es.), 2005. Bond behavior of FRP in structures. In: Proceedings of the International Symposium on Bond Behavior of FRP in Structures, The Hong Kong Polytechnic University, Hong Kong, China.
6. Cornetti P., Puzzi S., Carpinteri A., 2007. Failure mechanisms in beams strengthened with adhesive strips. In: Proceedings of the XVIII AIMETA Conference on CD-ROM, Brescia, Italy.
7. Dai J., Ueda T., and Sato Y. Development of nonlinear bond-slip model for fiber reinforced plastics sheet-concrete interfaces with a simple method. J. Compos. Constr. 9 1 (2005) 52-62
8. De Lorenzis L., and Zavarise G. Modeling of mixed-mode debonding in the peel test applied to superficial reinforcements. Int. J. Solids Struct. 45 (2008) 5419-5436
9. De Lorenzis L., and Zavarise G. Interfacial stress analysis and prediction of debonding for a thin plate bonded to a curved substrate. Int. J. Non-Linear Mech. 44 (2009) 358-370
10. De Lorenzis L., Teng J.G., and Zhang L. Elastic interfacial stresses in curved members bonded with a thin plate. Int. J. Solids Struct. 43 25-26 (2006) 7501-7517
11. De Lorenzis, L., Paggi, M., Carpinteri, A., Zavarise, G., in press. Linear elastic fracture mechanics approach to edge debonding in rectilinear and curved plated beams. Adv. Struct. Eng.
12. Deng J., Lee M.M.K., and Moy S.S.J. Stress analysis of steel beams reinforced with a bonded CFRP plate. Compos. Struct. 65 2 (2004) 205-215
13. Dugdale D.S. Yielding of steel sheets containing slits. J. Mech. Phys. Solids 8 (1960) 100-104
14. Ferracuti B., Savoia M., and Mazzotti C. A numerical model for FRP-concrete delamination. Compos. Part B - Eng. 37 4-5 (2006) 356-364
15. FIB, 2001. Externally bonded FRP reinforcement for RC structures, CEB-FIP Bulletin No. 14, Fédération Internationale du Béton, Lausanne, Switzerland.
16. Greco F., Lonetti P., and Blasi N. An analytical investigation of debonding problems in beams strengthened using composite plates. Eng. Fract. Mech. 74 3 (2007) 346-372
17. Holzenkämpfer, P., 1994, Ingenieurmodelle des verbundes geklebter bewehrung für betonbauteile. Dissertation, TU Braunschweig.
18. Karam, G.N., 1992. Optimal design for prestressing with FRP sheets in structural members. Advanced composite materials in bridge and construction. In: Neale K.W., Labossiere P., (Ed.). Canadian Society for Civil Engineering. Quebec, Canada, pp. 277-285.
19. L'Hermite, R., Bresson, J., 1967. Béton armé par collage d,armature. RILEM Colloquium. Eyrolles Ed., Paris.
20. Lu X.Z., Teng J.G., Ye L.P., and Jiang J.J. Bond-slip models for FRP sheets/plates bonded to concrete. Eng. Struct. 27 6 (2005) 920-937
21. Malek A.M., Saadatmanesh H., and Ehsani M.R. Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end. ACI Struct. J. 95 1 (1998) 142-152
22. Niu H., and Wu Z. Numerical analysis of debonding mechanism in FRP-strengthened RC beams. Computer-Aided Civil Infrastruct. Eng. 20 5 (2005) 354-368
23. Paggi, M., 2005. Interface Mechanical Problems in Heterogeneous Materials. Ph.D. Thesis, Politecnico di Torino, Torino, Italy.
24. Rabinovitch O., and Frostig Y. Closed-form high-order analysis of RC beams strengthened with FRP strips. J. Compos. Constr. ASCE 4 (2000) 65-74
25. Rabinovitch O. Fracture-mechanics failure criteria for RC beams strengthened with FRP strips - a simplified approach. Compos. Struct. 64 (2004) 479-492
26. Rabinovitch O. Debonding analysis of fiber-reinforced-polymer strengthened beams: cohesive zone modeling versus a linear elastic fracture mechanics approach. Eng. Fract. Mech. 75 (2008) 2842-2859
27. Rabinovitch O., and Frostig Y. Delamination failure of RC beams strengthened with FRP strips - a closed-form high-order and fracture mechanics approach. J. Eng. Mech. 127 8 (2001) 852-861
28. Roberts T.M., and Haji-Kazemi H. Theoretical study of the behavior of reinforced concrete beams strengthened by externally bonded steel plates. Proc. Inst. Civil Eng., Part 2 87 (1989) 39-55
29. Shen H.S., Teng J.G., and Yang J. Interfacial stresses in beams and slabs bonded with thin plates. J. Eng. Mech., ASCE 127 4 (2001) 399-406
30. Smith S.T., and Teng J.G. Interfacial stresses in plated beams. Eng. Struct. 23 (2001) 857-871
31. Smith S.T., and Teng J.G. FRP-strengthened RC beams. I. Review of debonding strength models. Eng. Struct. 24 4 (2002) 385-395
32. Smith S.T., and Teng J.G. FRP-strengthened RC beams. II. Assessment of debonding strength models. Eng. Struct. 24 4 (2002) 397-417
33. Stratford T., and Cadei J. Elastic analysis of adhesion stresses for the design of a strengthening plate bonded to a beam. Constr. Building Mater. 20 1-2 (2006) 34-45
34. Taljsten, B., 1994. Plate bonding, strengthening of existing concrete structures with epoxy bonded plates of steel or fibre reinforced plastics, Doctoral Thesis 1994:152D, Div. of Structural Engineering, Luleå University of Technology, ISSN 0348 - 8373, p 308.
35. Taljsten B. Strengthening of concrete prism using the plate-bonding technique. Int. J. Fract. 82 3 (1996) 253-266
36. Taljsten B. Strengthening of beams by plate bonding. J. Mater. Civil Eng., ASCE 9 4 (1997) 206-212
37. Teng J.G., Yuan H., and Chen J.F. FRP-to-concrete interfaces between two adjacent cracks: theoretical model for debonding failure. Int. J. Solids Struct. 43 18-19 (2006) 5750-5778
38. Triantafillou T.C., and Deskovic N. Innovative prestressing with FRP sheets: mechanics of short-term behavior. J. Eng. Mech. 117 7 (1991) 1652-1672
39. Tvergaard V., and Hutchinson J.W. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. J. Mech. Phys. Solids 40 (1992) 1377-1397
40. Vilnay O. The analysis of reinforced concrete beams strengthened by epoxy bonded steel plates. Int. J. Cem. Compos. Lightweight Concr. 10 2 (1988) 73-78
41. Wang J. Cohesive zone model of intermediate crack induced debonding of FRP-plated reinforced concrete beam. Int. J. Solids Struct. 43 21 (2006) 6630-6648
42. Wang J. Debonding of FRP plated reinforced concrete beam, a bond-slip analysis. I. Theoretical formulation. Int. J. Solids Struct. 43 21 (2006) 6649-6664
43. Wriggers P., Zavarise G., and Zohdi T.I. A computational study of interfacial debonding damage in fibrous composite materials. Comput. Mater. Sci. 12 (1998) 39-56
44. Wu Z., Yuan H., and Niu H. Stress transfer and fracture propagation in different kinds of adhesive joints. J. Eng. Mech. 128 5 (2002) 562-573
45. Xu X.P., and Needleman A. Numerical simulations of fast crack growth in brittle solids. J. Mech. Phys. Solids 42 9 (1994) 1397-1434
46. Yang, J., Wu, Y.F., 2005. Interfacial stresses in FRP plated concrete beams including shear deformation effect. In: Proceedings, International Symposium on Bond Behaviour of FRP in Structures, 7-9 December, Hong Kong, China, pp. 169-173.
47. Yang J., Teng J.G., and Chen J.F. Interfacial stresses in soffit-plated reinforced concrete beams. Proc. Inst. Civil Eng. Struct. Buildings 157 (2004) 77-89
48. Yang Q.S., Peng X.R., and Kwan A.K.H. Strain energy release rate for interfacial cracks in hybrid beams. Mech. Res. Commun. 33 6 (2006) 796-803
49. Yang J., Ye J., and Niu Z. Simplified solutions for the stress transfer in concrete beams bonded with FRP plates. Eng. Struct. 30 (2008) 533-545
50. Yuan H., Teng J.G., Seracino R., Wu Z.S., and Yao J. Full-range behaviour of FRP-to-concrete bonded joints. Eng. Struct. 26 (2004) 553-565
51. Zavarise G., 1991. Problemi termomeccanici di contatto - aspetti fisici e computazionali. Ph.D. thesis, Università di Padova, Padova, Italy.