Interfacial temperature measurements, high-speed visualization and finite-element simulations of droplet impact and evaporation on a solid surface

International Journal of Heat and Mass Transfer

Volumn 53, Issue 19-20, 2010, Pages 3733-3744

  Bhardwaj, Rajneesh ^a   Longtin, Jon P ^b   Attinger, Daniel ^a  

^a Columbia University ^*  (United States)

^b Stony Brook University   (United States)

Author keywords

Droplet evaporation; Droplet impact; High speed visualization; Interfacial heat transfer; Laser temperature measurement; Numerical simulation; Temperature measurement

Indexed keywords

DROPLET EVAPORATION; DROPLET IMPACT; HIGH-SPEED VISUALIZATION; INTERFACIAL HEAT TRANSFER; LASER TEMPERATURES; NUMERICAL SIMULATION;

COMPUTER SIMULATION; DROP FORMATION; EVAPORATION; FINITE ELEMENT METHOD; FLUID DYNAMICS; HEAT EXCHANGERS; HEAT TRANSFER; LIQUIDS; SPEED; TEMPERATURE MEASUREMENT; TEMPERATURE MEASURING INSTRUMENTS; VISUALIZATION; WETTING;

PHASE INTERFACES;

EID: 77954537257     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijheatmasstransfer.2010.04.024     Document Type: Article

References (82)

1. C.E. Bash, C.D. Patel, R.K. Sharma, Inkjet Assisted Spray Cooling of Electronics, presented at International Electronic Packaging Technical Conference and Exhibition (IPACK), Maui, Hawaii, 2003.
2. Pautsch A.G., Shedd T.A. Spray impingement cooling with single- and multiple-nozzle arrays. Part I: Heat transfer data using FC-72. Int. J. Heat Mass Transfer 2005, 48:3167-3175.
3. Shedd T.A., Pautsch A.G. Spray impingement cooling with single- and multiple-nozzle arrays. Part II: Visualization and empirical models. Int. J. Heat Mass Transfer 2005, 48:3176-3184.
4. R. Bhardwaj, D. Attinger, FC-72 spray in electronics cooling: a numerical tool to study the heat transfer between a microdroplet and a solid surface, presented at Advanced Technology Workshop on Thermal Management, Palo Alto, CA, 2005.
5. Joshi Y., Garimella S. Thermal challenges in the next generation electronic systems. Microelectronics 2003, 34:169.
6. Lim J.A., Lee W.H., Lee H.S., Lee J.H., Park Y.D., Cho K. Self-organization of ink-jet-printed triisopropylsilylethynyl pentacene via evaporation-induced flows in a drying droplet. Adv. Funct. Mater. 2008, 18:229-234.
7. Jones H. Rapid Solidification of Metals and Alloys 1982, vol. 8. Great Britain Institution of Metallurgists, London.
8. Annavarapu S., Apelian D., Lawley A. Spray casting of steel strip: process analysis. Metall. Trans. A 1990, 21:3237-3256.
9. D.J. Hayes, D.B. Wallace, M.T. Boldman, Picoliter solder droplet dispension, in: ISHM Symposium 92 Proceedings, 1992, pp. 316-321.
10. Waldvogel J.M., Diversiev G., Poulikakos D., Megaridis C.M., Attinger D., Xiong B., Wallace D.B. Impact and solidification of molten-metal droplets on electronic substrates. J. Heat Transfer 1998, 120:539.
11. Larson R.G., Perkins T.T., Smith D.E., Chu S. Hydrodynamics of a DNA molecule in a flow field. Phys. Rev. E 1997, 55:1794.
12. Heim T., Preuss S., Gerstmayer B., Bosio A., Blossey R. Deposition from a drop: morphologies of unspecifically bound DNA. J. Phys.: Condens. Matter 2005, 17:S703-S716.
13. Cuk T., Troian S.M., Hong C.M., Wagner S. Using convective flow splitting for the direct printing of fine copper lines. Appl. Phys. Lett. 2000, 77:2063.
14. Ondarcuhu T., Joachim C. Drawing a single nanofibre over hundreds of microns. Europhys. Lett. 1998, 42:215-220.
15. Private communication with Greg Gillen at National Institute of Standards and Technology (NIST).
16. Deegan R.D., Bakajin O., Dupont T.F., Huber G., Nagel S.R., Witten T.A. Capillary flow as the cause of ring stains from dried liquid drops. Nature 1997, 389:827-829.
17. Fukai J., Zhao Z., Poulikakos D., Megaridis C.M., Miyatake O. Modeling of the deformation of a liquid droplet impinging upon a flat surface. Phys. Fluids A 1993, 5:2588-2599.
18. Chandra S., Avedisian C.T. On the collision of a droplet with a solid surface. Proc. R. Soc. Lond. A 1991, 432:13-41.
19. Dam D.B.V., Clerc C.L. Experimental study of the impact of an ink-jet printed droplet on a solid substrate. Phys. Fluids 2004, 16:3403.
20. Kim H.-Y., Park S.-Y., Min K. Imaging the high-speed impact of microdrop on solid surface. Rev. Sci. Instrum. 2003, 74:4930.
21. Attinger D., Zhao Z., Poulikakos D. An experimental study of molten microdroplet surface deposition and solidification: transient behavior and wetting angle dynamics. J. Heat Transfer 2000, 122:544-556.
22. Mollaret R., Sefiane K., Christy J.R.E., Veyret D. Experimental and numerical investigation of the evaporation into air of a drop on a heated substrate. Chem. Eng. Res. Des. 2004, 82:471-480.
23. Wang M.-J., Lin F.-H., Hung Y.-L., Lin S.-Y. Dynamic behaviors of droplet impact and spreading: water on five different substrates. Langmuir 2009, 25:6772-6780.
24. Lim T., Han S., Chung J., Chung J.T., Ko S., Grigoropoulos C.P. Experimental study on spreading and evaporation of inkjet printed pico-liter droplet on a heated substrate. Int. J. Heat Mass Transfer 2009, 52:431-441.
25. Wang G.-X., Matthys E.F. Experimental determination of the interfacial heat transfer during cooling and solidification of molten metal droplets impacting on a metallic substrate: effect of roughness and superheat. Int. J. Heat Mass transfer 2002, 45:4967-4981.
26. Aziz S.D., Chandra S. Impact, recoil and splashing of molten metal droplets. Int. J. Heat Mass Transfer 2000, 43:2841-2857.
27. Wang W., Qiu H.-H. Interfacial thermal conductance in rapid contact solidification process. Int. J. Heat Mass transfer 2002, 45:2043-2053.
28. Xue M., Heichal Y., Chandra S., Mostaghimi J. Modeling the impact of a molten metal droplet on a solid surface using variable interfacial thermal contact resistance. J. Mater. Sci. 2007, 42:9-18.
29. Heichal Y., Chandra S. Predicting thermal contact resistance between molten metal droplets and a solid surface. J. Heat Transfer 2005, 127:1269.
30. Lee J., Kim J., Kiger K.T. Time- and space-resolved heat transfer characteristics of single droplet cooling using microscale heat arrays. Int. J. Heat Fluid Flow 2001, 22:188-200.
31. Kim J.-H., Ahn S.I., Kim J.H., Zin W.-C. Evaporation of water droplets on polymer surfaces. Langmuir 2007, 23:6163-6169.
32. Xue Z., Qiu H. Integrating micromachined fast response temperature sensor array in a glass microchannel. Sens. Actuators A 2005, 122:189-195.
33. Paik S.W., Kihm K.D., Lee S.P., Pratt D.M. Spatially and temporally resolved temperature measurements for slow evaporating sessile drops heated by a microfabricated heater array. J. Heat Transfer 2007, 129:966.
34. Chen Q., Li Y., Longtin J.P. Real-time laser-based measurement of interface temperature during droplet impingement on a cold surface. Int. J. Heat Mass Transfer 2003, 46:879-888.
35. Haferl, Z. Zhao, J. Giannakouros, D. Attinger, D. Poulikakos, Transport phenomena in the impact of a molten droplet on a surface: macroscopic phenomenology and microscopic considerations. Part I: Fluid dynamics, in: C.L. Tien (Ed.), Annual Review of Heat Transfer, vol. XI, Begell House, NY, 2000, pp. 145-205.
36. Attinger D., Haferl S., Zhao Z., Poulikakos D. Transport phenomena in the impact of a molten droplet on a surface: macroscopic phenomenology and microscopic considerations. Part II: Heat transfer and solidification. Ann. Rev. Heat Transfer 2000, XI:65-143.
37. Harlow F.H., Shannon J.P. The splash of a liquid drop. J. Appl. Phys. 1967, 38:3855-3866.
38. Pasandideh-Fard M., Qiao Y.M., Chandra S., Mostaghimi J. Capillary effects during droplet impact on a solid surface. Phys. Fluids 1996, 8:650-659.
39. Pasandideh-Fard M., Mostaghimi J. On the spreading and solidification of molten particles in a plasma spray process: effect of thermal contact resistance. Plasma Chem. Plasma Process. 1996, 16:83-98.
40. Pasandideh-Fard M., Bussmann R., Chandra S., Mostaghimi J. Simulating droplet impact on a substrate of arbitrary shape. Atomization Spray 2001, 11.
41. Pasandideh-Fard M., Bohla R., Chandra S., Mostaghimi J. Deposition of tin droplets on a steel plate: simulations and experiments. Int. J. Heat Mass Transfer 1998, 41:2929-2945.
42. Pasandideh-Fard M., Aziz S.D., Chandra S., Mostaghimi J. Cooling effectiveness of a water drop impinging on a hot surface. Int. J. Heat Fluid Flow 2001, 22:201-210.
43. Sussman M., Almgren A.S., Bell J.B., Colella P., Howell L.H., Welcome M.L. An adaptive level set approach for incompressible two-phase flows. J. Comput. Phys. 1999, 148:81.
44. Tryggvason G., Bunner B., Esmaeeli A., Juric D., Al-Rawahi N., Tauber W., Han J., Nas S., Jan Y.J. A front-tracking method for the computations of multiphase flow. J. Comput. Phys. 2001, 169:708.
45. Zhao Z., Poulikakos D., Fukai J. Heat transfer and fluid dynamics during the collision of a liquid droplet on a substrate: I -- Modeling. Int. J. Heat Mass Transfer 1996, 39:2771-2789.
46. Waldvogel J.M., Poulikakos D. Solidification phenomena in picoliter size solder droplet deposition on a composite substrate. Int. J. Heat Mass Transfer 1997, 40:295-309.
47. Xiong B., Megaridis C.M., Poulikakos D., Hoang H. An investigation of key factors affecting solder microdroplet deposition. J. Heat Transfer 1998, 120:259-270.
48. Attinger D., Poulikakos D. On quantifying interfacial thermal and surface energy during molten microdroplet surface deposition. J. Atomization Spray 2003, 13:309-319.
49. Deegan R.D., Bakajin O., Dupont T.F., Huber G., Nagel S.R., Witten T.A. Contact line deposits in an evaporating drop. Phys. Rev. E 2000, 62:756.
50. Deegan R.D. Pattern formation in drying drops. Phys. Rev. E 2000, 61:475-485.
51. Hu H., Larson R.G. Evaporation of a sessile droplet on a substrate. J. Phys. Chem. B 2002, 106:1334-1344.
52. Hu H., Larson R.G. Analysis of microfluid flow in an evaporating sessile droplet. Langmuir 2005, 21:3963-3971.
53. Ruiz O.E., Black W.Z. Evaporation of water droplets placed on a heated horizontal surface. J. Heat Transfer 2002, 124:854.
54. Girard F., Antoni M., Faure S., Steinchen A. Evaporation and Marangoni driven convection in small heated water droplets. Langmuir 2006, 22:11085-11091.
55. Widjaja E., Harris M.T. Numerical study of vapor phase-diffusion driven sessile drop evaporation. Comput. Chem. Eng. 2008, 32:2169-2178.
56. Hu H., Larson R.G. Marangoni effect reversed coffee-ring depositions. J. Phys. Chem. B 2006, 110:7090-7094.
57. Popov Y. Evaporative deposition patterns revisited: spatial dimensions of the deposit. Phys. Rev. E 2005, 71:36313.
58. Picknett R.G., Bexon R. The evaporation of sessile or pendant drops in still air. J. Colloid Interface Sci. 1977, 61:336-350.
59. Dyreby J.J., Nellis G.F., Turner K.T. Simulating fluid flow in lithographically directed, evaporation driven self assembly systems. Microelectron. Eng. 2007, 84:1519-1522.
60. Hu H., Larson R.G. Analysis of the effects of Marangoni stresses on the microflow in an evaporating sessile droplet. Langmuir 2005, 21:3972-3980.
61. Widjaja E., Liu N., Li M., Collins R.T., Basaran O.A., Harris M.T. Dynamics of sessile drop evaporation: a comparison of the spine and the elliptic mesh generation methods. Comput. Chem. Eng. 2007, 31:219-232.
62. Widjaja E., Harris M.T. Particle deposition study during sessile drop evaporation. AIChe J. 2008, 54:2250-2260.
63. Shahidzadeh-Bonn N., Rafai S., Azouni A., Bonn D. Evaporating droplets. J. Fluid Mech. 2006, 549:307-313.
64. Poulard C., Guena G., Cazabat A.M., Boudaoud A., Amar M.B. Rescaling the dynamics of evaporating drops. Langmuir 2005, 21:8226-8233.
65. Crafton E.F., Black W.Z. Heat transfer and evaporation rates of small liquid droplets on heated horizontal surfaces. Int. J. Heat Mass Transfer 2004, 47:1187-1200.
66. Available from: http://www.mellesgriot.com/products/optics/mp_3_2.htm.
67. J. Sun, Laser-based thermal pulse measurement of liquid thermal conductivity and thermal diffusivity, department of mechanical engineering, Masters Thesis, State University of New York at Stony Brook, 1999, pp. 77.
68. Available from: http://www.scioncorp.com/pages/scion_image_windows.htm.
69. Bhardwaj R., Fang X., Attinger D. Pattern formation during the evaporation of a colloidal nanoliter drop: a numerical and experimental study. New J. Phys. 2009, 11:075020.
70. Attinger D., Poulikakos D. Melting and resolidification of a substrate caused by molten microdroplet impact. J. Heat Transfer 2001, 123:1110-1122.
71. Bhardwaj R., Longtin J.P., Attinger D. A numerical investigation on the influence of liquid properties and interfacial heat transfer during microdroplet deposition onto a glass substrate. Int. J. Heat Mass Transfer 2007, 50:2912-2923.
72. Bhardwaj R., Attinger D. Non-isothermal wetting during impact of millimeter size water drop on a flat substrate: numerical investigation and comparison with high speed visualization experiments. Int. J. Heat Fluid Flow 2008, 29:1422-1435.
73. Blake T.D., DeConinck J. The influence of solid-liquid interactions on dynamic wetting. Adv. Colloid Interface Sci. 2002, 66:21.
74. Lide D.R. CRC Handbook of Chemistry and Physics on CD-ROM 2001, Chapman & Hall/CRC, London/Boca Raton, FL. 81st ed.
75. Vargaftik N.B. Handbook of Physical Properties of Liquids and Gases: Pure Substances and Mixtures 1975, Hemisphere, Washington, DC, p. 644.
76. Lusty M.E., Dunn M.H. Refractive indices and thermo-optical properties of dye laser solvents. Appl. Phys. B 1987, 44:193-198.
77. Solimini D. Loss measurement of organic material at 6328Angstroms. J. Appl. Phys. 1966, 37:3314-3315.
78. Stone J. Measurements of the absorption of light in low-loss liquids. J. Opt. Soc. Am. 1972, 62:327-333.
79. Schiaffino S., Sonin A.A. Molten droplet deposition and solidification at low weber numbers. Phys. Fluids 1997, 9:3172-3187.
80. Carslaw H.S., Jaeger J.C. Conduction of Heat in Solids 1959, Clarendon Press, Oxford.
81. Loulou T., Delaunay D. The interface temperature of two suddenly contacting bodies, one of them undergoing phase change. Int. J. Heat Mass Transfer 1997, 40:1713-1716.
82. Y. Popov, Singularities, universality and scaling in evaporative deposition patterns, Ph.D. Thesis, University of Chicago, 2003. Available from: (retrieved on October 2007). http://jfi.uchicago.edu/~tten/Coffee.drops/.