The dynamics of the piezo inkjet printhead operation

Physics Reports

Volumn 491, Issue 4-5, 2010, Pages 77-177

  Wijshoff, Herman ^a  

^a OCÉ TECHNOLOGIES B V   (Netherlands)

Author keywords

Acoustics; Bubble dynamics; Drop formation; Inkjet; Piezoelectricity; Wetting

Indexed keywords

EID: 77953686172     PISSN: 03701573     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.physrep.2010.03.003     Document Type: Review

References (536)

1. Pond J.F. Inkjet Technology and Product Development Strategies 2000, Torrey Pines Research.
2. Nollet J.A. Recherches sur les causes particulieres des phenomenes electriques 1749, Les Freres Guerin, Paris.
3. Nollet J.A., Watson Mr. An examination of certain phenomena in electricity. Phil. Trans. 1749, 46:368.
4. Navier C.L.M.H. Memoires sur les lois du movement des fluides. Mem. Acad. Sci. Inst. France 1822, 6:389.
5. Euler L. Principes géneraux du mouvementdes fluides. Mem. Acad. Sci. Berlin 1755, 11:274.
6. C.L.M.H. Navier, Memoire sur les lois de l'áquilibre et du mouvement des corps solides élastiques, abstract presented to the Acadámie des Sciences on May 14, (1821). Bulletin des sciences par la Socitété Philomatique de Paris, 177, (1823). Published in Mémoires de l'Institut National 7, 375 (1827).
7. Stokes G.G. On the theories of the internal friction of fluids in motion, and of the equilibrium and motion of elastic solids. Trans. Cambr. Phil. Soc. 1849, IIX:287.
8. Plateau J.A.F. Mémoire sur les phénomenes que présente une masse liquide sans pesanteur. Mém. Acad. Sci. Bruxelles 1843, 16:3.
9. Plateau J.A.F. Recherches expérimentales et théoriques sur les figures d'équilibre d'une mass liquide sans pesanteur. Mém. Acad. Sci. Bruxelles 1849, 23:5.
10. Hagen G. Über die Auflösung flüssiger Cylinder in Tropfen. Verh. Preuss. Akad. Wissenschaften 1849, 281.
11. Plateau J.A.F. On the recent theories of the constitution of jets of liquid issuing from circular orifices. Phil. Mag. 1856, 12:286.
12. Plateau J.A.F. Statique expérimentale et theorique des liquides soumis aux seules forces moléculaires 1873, Gauthier Villars.
13. Rayleigh Lord On the instability of jets. Proc. Lond. Math. Soc. 1878, 10:4.
14. Rayleigh Lord On the instability of a cylinder of viscous liquid under capillary force. Philosophical Magazine 1892, 34:145.
15. Rayleigh Lord On the instability of cylindrical fluid surfaces. Philosophical Magazine 1892, 34(207):177.
16. Savart F. Memoire sur la constitution des veines liquides lancees par des orifices circulaires en mince parol. Ann. Chim. 1833, 53:337.
17. Tate T. On the magnitude of a drop of liquid formed under different circumstances. Phil. Mag. 1864, 27:176.
18. da Vinci L. Codex Leicester 1508, Christie's London.
19. Mariotte E. Traité du mouvement des eaux et des autres corps fluides 1686, E. Michallet, Paris.
20. Young T. Cohesion of fluids. Philos. Trans. R. Soc. Lond. 1804, 95:65.
21. Laplace P.S. Mechanique celeste, supplement au X libre 1805, Courier, Paris.
22. Maxwell J.C. On physical lines of forces. Phil. Mag. 1861, 25:161.
23. Maxwell J.C. A dynamical theory of the electromagnetic field. Phil. Trans. 1865, 155:459.
24. Curie J., Curie P. Development, par pression, de l'electricite polarise dans les crystaux hemiednes et fares inclines. Comp. Rend. 1880, 91:294.
25. J. Brünahl, Physics of piezoelectric shear mode inkjet actuators, Ph.D. Thesis Royal Institute of Technology Stockholm, 2003.
26. Ballato A. Piezoelectricity: old effect, new thrust. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 1995, 42:916.
27. Magnus G. Hydraulische Untersuchungen. Ann. Phys. Chem. 1859, 106:1.
28. Boys C.V. Soap-bubbles and the forces which mould them. Phil. Mag. 1890, 30:248.
29. Rayleigh Lord Some applications of photography. Nature 1891, 44:249.
30. Lenard P. Ueber die Schwingungen fallender Tropfen. Ann. Phys. Chem. 1887, 30:209.
31. Rayleigh Lord Investigations in capillarity: the size of drops. Phil. Mag. 1899, 48:321.
32. Hauser E.A., Edgerton H.E., Holt B.M., Cox J.T. The application of the high-speed motion picture camera to research on the surface tension of liquids. J. Phys. Chem. 1936, 40:972.
33. Edgerton H.E., Hauser E.A., Tucker W.B. Studies in drop formation as revealed by the high-speed motion camera. J. Phys. Chem. 1937, 41:1029.
34. Weber C. Zum Zerfall eines Flüssigkeitsstrahles. Z. Angew. Math. Mech. 1931, 11:11.
35. Baldwin Sawyer C. The use of rochelle salt crystals for electrical reproducers and microphones. Proc. R.E. 1931, 19(11):2020.
36. Kampfhoefner F.J. Ink jet printing. IEEE Trans. Electron Devices 1972, 19:584.
37. Schneider J.M., Hendricks C.D. Source of uniform-sized liquid droplets. Rev. Sci. Instrum. 1964, 35:1349.
38. Keeling M.R. Ink jet printing. Phys. Technol. 1981, 12:196.
39. Sweet R.G. High frequency recording with electrostatically deflected ink-jets. Rev. Sci. Instrum. 1965, 36:131.
40. Buehner W.L., Hill J.D., Williams T.H., Woods J.W. Application of ink-jet technology to a word processing output printer. IBM J. Res. Dev. 1977, 21:1968.
41. Le H.P. Progress and trends in ink-jet printing technology. J. Imaging Sci. Technol. 1998, 42:49.
42. Hertz C.H., Simonsson S.I. Intensity modulation of ink-jet oscillographs. Med. Biol. Eng. 1969, 7:337.
43. Heinzl J. Printing with ink droplets from a multi-nozzle device. Advances in Non-Impact Printing Technologies for Computer Abd Office Applications 1981, 1191. J. Gaynor (Ed.).
44. Zeleny J. The electrical discharge from liquid points, and a hydrostatic method of measuring the electric intensity at their surfaces. Phys. Rev. 1914, 3:69.
45. Taylor G. Disintegration of water drops in an electric field. Proc. R. Soc. Lond. A 1964, 280:383.
46. Jackson J.D. Classical Electrodynamics 1975, Wiley, New York.
47. Li H., Halsey T.C., Lobkovsky A.E. Singular shape of a fluid drop in an electric or magnetic field. Europhys. Lett. 1994, 27:575.
48. Clopeau M., Prunet-Foch B. Electrostatic spraying of liquids in cone-jet mode. J. Electrost. 1989, 22:135.
49. Fernández de la Mora J., Navascués J., Fernández F., Rosell-Llompart J. Generation of submicron monodisperse aerosols in electrosprays. J. Aerosol Sci. 1990, 21:S673.
50. Kawamoto H., Umezu S., Koizumi R. Fundamental investigation on electrostatic inkjet phenomena in pin-to-plate discharge systems. J. Imaging Sci. Technol. 2005, 49(1):19.
51. Bailey A.G. Electrostatic Spraying of Liquids 1988, Wiley, New York.
52. Carnahan R.D., Hou S.L. Ink jet technologies. IEEE Trans. Ind. Appl. 1977, 1A-13:95.
53. Bugdayci N., Bogy D.B., Talke F.E. Axisymmetric motion of radially polarized piezoelectric cylinders used in ink jet printing. IBM J. Res. Dev. 1983, 27:171.
54. Stemme E., Larsson S.G. A piezoelectric capillary injector. IEEE Trans. Electron Devices 1973, 20:14.
55. Kyser E.L., Collins L.F., Herbert N. Design of an impulse ink jet. J. Appl. Photogr. Eng. 1981, 7:73.
56. R. Beesom, The ABCs of HP's SPT (Scalable Printhead Technology), in: IMI 13th Annual European Inkjet Conference, 2005.
57. Döring M. Ink jet printing. Philips Tech. Rev. 1982, 40:192.
58. van Randeraat J., Setterington R.E. Piezoelectric Ceramics 1974, Mullard Ltd, London.
59. J. Perelaer, Microstructures prepared via inkjet printing and embossing techniques, Ph.D. Thesis, Eindhoven university of technology ISBN 978-90-386-1529-5, 2009.
60. J.Y. Kim, V. Fakhfouri, C. Ingrosso, M. Striccol, M.L. Curri, J. Brugger, Drop on demand ink jet printing of functional materials: case stude of SU8 and NC based polymer nanocomposites, in: Proc. IS&T's NIP24 and DF2008, 2008, p. 269.
61. Yang J.C., Chien W., King M., Grosshandler W.L. A simple piezo-electric droplet generator. Exp. Fluids 1997, 23:445.
62. Lung C.Y., Barnes M.D., Lermer N., Whitten W.B., Ramsey J.M. Single-molecule analysis of ultradilute solutions with guided streams of 1-μm water droplets. Appl. Opt. 1999, 38:1481.
63. Berggren W.T., Westphall M.S., Smith L.M. Single-pulse nano- electrospray ionization. Anal. Chem. 2002, 74:3443.
64. Shin D.Y., Grassia P., Derby B. Oscillatory limited compressible fluid flow induced by the radialmotion of a thick-walled piezoelectric tube. J. Acoust. Soc. Am. 2003, 114:1314.
65. A.L. Brady, M. McDonald, S.N. Theriault, B. Smith, The impact of Silicon MEMS on the future of ink jet printhead design and performance, in: Proc. IS&T's NIP21, 2005, p. 264.
66. Meacham J.M., Varady M.J., Degertekin F.L., Fedorov A.G. Droplet formation and ejection from a micromachined ultrasonic droplet generator: visualization and scaling. Phys. Fluids 2005, 17:100605.
67. M. Schoeppler, Diverging ink jet technologies and applications, in: Proc. IS&T's NIP22, 2006, p. 1.
68. Williams Chr. Ink-jet printers go beyond paper. Phys. World 2006, 19:24.
69. F.K. Chen, J.P. Lu, P.J. Su, C.F. Sung, Y.Z. Lee, J.W. Shiu, K. Cheng, Mask-free fabrication of color filter by an all ink-jet printing process, in: Proc. IS&T's NIP23, 2007, p. 852.
70. Dijksman J.F., Duineveld P.C., Hack M.J.J., Pierik A., Rensen J., Rubingh J.E., Schram I., Vernhout M.M. Precision inkjet printing of polymer light emitting displays. J. Mater. Chem. 2007, 17:511.
71. R. Bennett, Precision industrial ink-jet printing technology for full color PLED display and TFT-LCD manufacturing, in: Proc. of the 3rd International Display Manufacturing Conference, Japan, 2003.
72. Haskal E.I., Buechel M., Dijksman J.F. Ink jet printing of passive matrix polymer light emitting displays. Proc. Int. Symp. Soc. Inf. Disp. 2002, 33:776.
73. Nakanishi T., Ohtsu I., Furuta M., Ando E., Nishimura O. Direct MS/MS analysis of proteins blotted on membranes by a matrix-assisted laser desorption/ionization-quadrupole ion trap-time-of-flight tandem mass spectrometer. J. Proteome Research 2005, 4:743.
74. Ohtsu I., Nakanisi T., Furuta M., Ando E., Nishimura O. Direct matrix-assisted laser desorption/ionization time-of-flight mass spectrometric identification of proteins on membrane detected by western blotting and lectin blotting. J. Proteome Research 2005, 4:1391.
75. Koo H.S., Chen M., Pan P.C. LCD-based color filter films fabricated by a pigment-based photo resist inks and printing technology. Thin Solid Films 2006, 515:896.
76. C.W. Wang, W.C. Chen, K. Cheng, Y.Z. Lee, Inkjet patterning of UV-curable etching resist for flexible conductive circuit electrodes, in: Proc. IS&T's NIP23, 2007, p. 855.
77. W. Voit, W. Zapka, A. Menzel, F. Mezger, T. Sutter, Inkjet printing of phase-change materials, in: Proc. IS&T's NIP24 and DF2008, 2008, p. 678.
78. A. Lennon, R. Utama, A.H. Batillie, M. Lenio, N. Kuepper, S. Wenham, Inkjet method for forming openings to buried semiconductor layers of silicon solar cells, in: Proc. IS&T's NIP23, 2007, p. 882.
79. J. Heilmann, The applications of inkjet for the printing of PDLC display cells, in: Proc. IS&T's NIP21, 2005, p. 48.
80. A. Knobloch, Printed RFID labels based on polymer electronics, in: Proc. DF2005, 2005, p. 121.
81. Lee H.H., Chou K.S., Huang K.C. Inkjet printing of nanosized silver colloids. Nanotechnology 2005, 16(10):2436.
82. J. Szczech, J. Zhang, K. Kalyan, P. Brazis, D. Gamota, Printed electronic using traditional graphic arts printing technologies, in: Proc. DF2005, 2005, p. 213.
83. K.A. Bertness, C.M. Dodson, P.T. Blanchard, N.A. Sanford, R.S. Mills, Nanowire placement with ink jet heads, in: Proc. IS&T's NIP23, 2007, p. 836.
84. S. Maekawa, T. Yoshida, S. Kinpara, H. Eguchi, Y. Ohta, Wide print-head with high-stiffness and control method drive, in: Proc. IS&T's NIP23, 2007, p. 310.
85. V. Sanchez-Romaquera, Inkjet printing of metal-dielectric crossovers, in: Proc. IS&T's NIP23, 2007, p. 818.
86. Wallace D.B., Cox W.R., Hayes D.J. Direct write using inkjet techniques. Direct-Write Technologies for Rapid Prototyping Applications - Sensors, Electronics, and Integrated Power Sources 2002, 177-227. Academic Press, San Diego.
87. Voit W., Zapka W., Belova L., Rao K.V. Application of inkjet technology for the deposition of magnetic nanoparticles to form micronscale structures. IEEE Proc. 2003, 150(5):252.
88. W.Y. Yeong, C.K. Chua, K.F. Leong, M. Chandrasekaran, 3D inkjet printing for rapid prototyping: development of a physical model, in: Proc. Int. Conf. Materials Processing for Properties and Performance, 2004, p. 379.
89. Cox W.R., Chen T., Ussery D., Hayes D.J., Tatum J.A., MacFarlane D.L. Microjetted lenslet triplet fibers. Opt. Commun. 1996, 123:492.
90. Chen T., Cox W.R., Lenhard D., Hayes D.J. Microjet printing of high precision microlens array for packaging of fiber-optic components. Proc. SPIE Optoelectronic Interconnects, Integr. Circuits Packag. 2002, 4652:136.
91. Bietsch A., Zhang J., Hegner M., Lang H.P., Gerber C. Rapid functionalization of cantilever array sensors by inkjet printing. Nanotechnology 2004, 15(8):873.
92. Basaran O.A. Small-scale free surface flows with breakup: Drop formation and emerging applications. AIChE J. 2002, 48:1842.
93. Chee M., Yang R., Hubbell E., Berno A., Huang X.C., Stern D., Winkler J., Lockhart D.J., Morris M.S., Fodor S.P.A. Accessing genetic information with high-density DNA arrays. Science 1996, 274:610.
94. James P., Papen R. Nanolitre dispensing: a new innovation in robotic liquid handling. Drug Discov. Today 1998, 3(9):429.
95. Cooley P.W., Wallace D.B., Antohe B.V. Application of inkjet printing technology to biomems and microfluidic systems. Proc. SPIE Conference Microfluidics BioMEMS 2001, 4560:177.
96. D. Radulescu, et al., 3d printing of biological materials for drug delivery and tissue engineering applications, in: Proc. DF2005, 2005, p. 96.
97. Charter J.C., Alvis R.M., Brown S.B., Langry K.C., Wilson T.S., McBride M.T., Myrick M.L., Cox W.R., Grove M.E., Colston B.W. Fabricating optical fiber imaging sensors using inkjet printing technology: A pH sensor proof-of-concept. Biosens. Bioelectron. 2006, 21(7):1359.
98. R.R. Allen, Inkjet printing with large pagewide arrays: issues and challenges, in: Proc. IS&T's NIP12, 1996, p. 43.
99. D. Bruijnen, R. van de Molengraft, A. Draad, T. Heeren, Productivity analysis of a scanning inkjet printer, in: Proc. IS&T's NIP21, 2005, p. 129.
100. Y. Zhou, The application of piezo ink jet technology to high-speed dod single pass printing, in: Proc. IS&T's NIP16, 2000, p. 28.
101. C. Tracy, D. Grose, The quality plan for the manufacture of an ink jet print assembly with 1536 jets, in: Proc. IS&T's NIP18, 2002, p. 157.
102. A. Hirota, N. Aichi, S. Ishikura, Development of drop-on-demand piezoelectric line inkjet printhead, in: Proc. IS&T's NIP21, 2005, p. 257.
103. Y. Zhou, Recent advances in highle durable piezoelectric inkjet print head technology, in: Proc. IS&T's NIP20, 2004, p. 855.
104. Bogy D.B., Talke F.E. Experimental and theoretical study of wave propagation phenomena in drop-on-demand ink jet devices. IBM J. Res. Dev. 1984, 28:314.
105. S. Allaman, G. Desie, Improved ink jet in situ visualization strategies, in: Proc. IS&T's NIP20, 2004, p. 383.
106. Dong H., Carr W.W., Morris J.F. Visualization of drop-on-demand inkjet: drop formation and deposition. Rev. Sci. Instrum. 2006, 77:085101.
107. Kalaaji A., Lopez B., Attané P., Soucemarianadin A. Breakup length of forced liquid jets. Phys. Fluids 2003, 15:2469.
108. Gonzáles H., Garcia F.J. Comment on "Breakup length of forced liquid jets" [Phys. Fluids 15, 2469 (2003)]. Phys. Fluids 2006, 18:019101.
109. Attané P. Response to "Comment on 'Breakup length of forced liquid jet"' [Phys. Fluids 18, 019101 (2006)]. Phys. Fluids 2006, 18:019102.
110. Ritter R.C., Zinner N.R., Sterling A.M. Analysis of drop intervals in jets modelling obstruction of the urinary tract. Phys. Med. Biol. 1974, 19:161.
111. Quian S.X., Snow J.B., Tzeng H.M., Chang R.K. Lasing droplets: highlighting the liquid-air interface by laser emission. Science 1986, 231:486.
112. Vágó N., Spiegel A., Couty P., Wagner F.R., Richerzhagen B. New technique for high-speed microjet breakup analysis. Exp. Fluids 2003, 35:303.
113. Doring M. Inkjet printing. Philips Tech. Rev. 1982, 40:192.
114. Martin G.D., Hoath S.D., Hutchings I.M. Inkjet printing - the physics of manipulating liquid jets and drops. J. Phys. Conf. Series 2008, 105:012001.
115. Rembe C., Wiesche S.A.D., Beuten M., Hofer E.P. Investigations of nonreproducible phenomena in thermal inkjets with high-speed cine photomicrography. J. Imaging Sci. Technol. 1999, 43:325.
116. Y. Zhou, Measurement of the displacement of a shear mode piezoelectric transducer using laser Doppler vibrometer, in: Proc. IS&T's NIP14, 1998, p. 23.
117. K.S. Kwon, Inkjet status monitoring using meniscus measurement, in: Proc. IS&T's NIP24 and DF2008, 2008, p. 134.
118. M. vd Velden, J.W. Spronck, R.H. Munnig Schmidt, J. Wei, P.M. Sarro, Characterization of a nozzle-integrated capacitive sensor for microfluidic jet systems, in: Proc. IEEE Sensors2007, 2007, p. 1241.
119. J. Wei, M. vd Velden, P.M. Sarro, Fabrication of vertical electrodes on channel sidewall for picoliter liquid measurement, in: Proc. Transducers2007, 2007, p. 1613.
120. Meinhart C.D., Zhang H. The flow structure inside a microfabricated inkjet printhead. J. MEMS Systems 2000, 9:67.
121. Waanders J.W. Piezoelectric Ceramics. Properties and Applications 1991, Philips Components, Eindhoven.
122. M.B. Groot Wassink, Inkjet printhead performance enhancement by feedforward input design based on two-port modeling, Ph.D. Thesis, Delft University of Technology, 2007.
123. J. de Jong, Air entrapment in piezo inkjet printing, Ph.D. Thesis, University of Twente, 2007.
124. Longman R.W. Iterative learning control and repetitive control for engineering practice. Int. J. Control 2000, 73:930.
125. Arimoto S., Kawamura S., Miyazaki F. Bettering operation of robots by learning. J. Rob. Sys. 1984, 1:123.
126. Moore K.L. Iterative learning control: an expository overview. Appl. Comp. Contr. Signal Proc. Circuits 1998, 1:151.
127. H.M.A. Wijshoff, Free surface flow and acousto-elastic interaction in piezo inkjet, in: Proc. NSTI Nanotech2004, 2, 2004, p. 215.
128. Wijshoff H.M.A. Better printheads via simulation: flow3D helped double the speed of a new wide-format printer without sacrificing quality. Desktop Engineering 2007, 13(2):46.
129. Palesko J.A., Bernstein D.H. Modeling MEMS and NEMS 2003, Chapman & Hall CRC Press.
130. H.M.A. Wijshoff, Structure- and fluid-dynamics in piezo inkjet printheads, Ph.D. Thesis, University of Twente, 2008.
131. Gad-el-Hak M. The fluid mechanics of microdevices - the Freeman scholar lecture. J. Fluids Eng. 1999, 121:5.
132. Y. Zhou, A coupled field analysis of an ink jet printhead with shear mode piezo transducer, in: Proc. IS&T's NIP13, 1997, p. 809.
133. Seitz H., Heinzl J. Modelling of a microfluidic device with piezoelectric actuators. J. MicroMech. & Microeng. 2004, 14:1140.
134. Wijshoff H. Color flow through the years. First Pass CFD Analysis Part 2 2008, 1. Desktop Engineering. P.J. Waterman (Ed.).
135. Jaffe B., Cook W.R., Jaffe H. Piezoelectric Ceramics 1971, Academic Press, London.
136. Uchino K. Recent topics of ceramic actuators: how to develop new ceramic devices. Ferroelectrics 1989, 91:281.
137. Uchino K. Piezoelectric Actuator and Ultrasonic Motors 1997, Kluwer Academic Publishers, Boston, MA.
138. 3. Phys. Rev. Lett. 2000, 84:5423.
139. Noheda B., Gonzalo J.A., Guo R., Park S.E., Cross L.E., Cox D.E., Shirane G. The monoclinic phase in PZT: new light on morphotropic phase boundaries. Fundamental Physics of Ferroelectrics 2000, AIP, New York. R. Cohen (Ed.).
140. 3. Phys. Rev. B 2000, 61:8687.
141. Noheda B., Cox D.E. Bridging phases at the morphotropic boundaries of lead-oxide solid solutions. Phase Trans. 2006, 79:5.
142. K.D. Wolf, Electromechanical energy conversion in asymmetric piezoelectric bending actuators, Ph.D. Thesis, Technical University Darmstadt, 2000.
143. Auld B.A. Wave propagation and resonance in piezoelectric materials. J. Acoust. Soc. Am. 1981, 70(6):1577.
144. Maugin G.A. Continuum Mechanics of Electromagnetic Solids 1988, Elsevier, New York.
145. Reiss H. Methods of Thermodynamics 1996, Dover Publications.
146. Jona F., Shirane G. Ferroelectric Crystals 1993, Dover Publications, New York.
147. D. Cibis, K. Krüger, Optimization of a DoD printhead signal for the ink-jetting of conductive circuits, in: Proc. IS&T's NIP24 and DF2008, 2008, p. 125.
148. T. Takahashi, Adaptability of piezoelectric inkjet head, in: Proc. IS&T's NIP17, 2001, p. 323.
149. T. Chen, Piezoelectric inkjet print head technology for Precision Dispensing Application, in: Proc. DF2006, 2006, 66.
150. Wang Q.M., Cross L.E. Performance analysis of piezoelectric cantilever bending actuators. Ferroelectrics 1998, 215:187.
151. Germano C. Flexure mode piezoelectric transducers. IEEE Trans. Audio Electroacoust. 1971, 19(1):6.
152. Uchino K., Yoshizaki M., Kasai K., Yamamura H., Sakai N., Asakura H. Monomorph actuators using semiconductive ferroelectrics. Jap. J. App. Phys. 1987, 26(7):1046.
153. Roark R.J., Young W.C. Formulas for Stress and Strain 1975, McGraw-Hill, New York.
154. Banks H.T., Smith R.C., Wang Y. The modeling of piezoceramic path interactions with shells, plates and beams. Quartely Appl. Mech. 1995, 53(2):353.
155. Donoso A., Sigmund O. Optimization of piezoelectric bimorph actuators with active damping for static and dynamic loads. Struct. Multidisc. Optim. 2008, 38(2):171.
156. Li X., Shih W.Y., Aksay I.A. Electromechanical behavior of PZT-brass unimorphs. J. Am. Ceram. Soc. 1999, 82(7):1733.
157. S.A.N. Prasad, Two-port electroacoustic model of a piezoelectric composite circular plate, Ph.D. Thesis, University of Florida, 2002.
158. Ohba Y., Miyauchi M., Tsurumi T., Daimon M. Analysis of bending displacement of lead zirconate titanate thin film synthesized by hydrothermal method. Jap. J. Appl. Phys. 1993, 32:4095.
159. Glumac D.E., Cooney T.G., Francis L.F., Robbins W.P. A theoretical examination of MEMS microactuators responses with an emphasis on materials and fabrication. Mat. Res. Soc. Symp. Proc. 1995, 360:407.
160. Torres J.M., Dhariwal R.S. Electric field breakdown at micrometer separations. Nanotechnology 1999, 10:102.
161. M. Usui, H. Hayashi, K. Hara, T. Kitahara, Development of the new MACH (MACH with MLCips, in: Proc. IS&T's NIP12, 1996, p. 50.
162. T. Mimura, S. Sakai, Micro piezoelectric head technology of color inkjet printer, in: Proc. DPP2001, 2001, p. 230.
163. J. Zhang, New developments in Epson's inkjet head technology, in: Proc. IS&T's NIP21, 2005, p. 269.
164. M. Okumura, T. Takahashi, Novel micro piezo technology for ink jet printhead, in: Proc. IS&T's NIP23, 2007, p. 314.
165. K. Ozawa, T. Usui, K. Ida, H. Takahashi, S. Sakai, Development of a femtoliter piezo ink-jet head for high resolution printing, in: Proc. IS&T's NIP23, 2007, p. 898.
166. R.F. Burr, D.A. Tence, S.S. Berger, Multiple dot size fluidics for phase change piezoelectric ink jets, in: Proc. IS&T's NIP12, 1996, p. 12.
167. S.S. Berger, R.F. Burr, J.D. Padgett, D.A. Tence, Ink manifold design of phase change piezoelectric ink jets, in: Proc. IS&T's NIP13, 1997, p. 703.
168. Chr. Menzel, A. Bibl, P. Hoisington, MEMS solutions for precision micro-fluidic dispensing applications, in: Proc. IS&T's NIP20, 2004, p. 169.
169. M. McDonald, Scaling of piezoelectric drop-on-demand jets for high resolution applications, in: Proc. IS&T's NIP12, 1996, p. 53.
170. H.J. Manning, R.A. Harvey, Xaar greyscale technology, in: Proc. IS&T's NIP15, 1999, p. 35.
171. W. Zapka, R. Kaack, W. Voit, M. Schulz, M. Zimmermann, L. Levin, W. Ahlemeir, Large drop volumes from Xaar-type inkjet printheads, in: Proc. IS&T's NIP18, 2002, p. 161.
172. B.V. Antohe, D.B. Wallace, Acoustic phenomena in a demand-mode piezoelectric inkjet printer, in: Proc. IS&T's NIP17, 2001, p. 885.
173. Tiersten H.F. Linear Piezoelectric Plate Vibrations 1969, Plenum Press, New York.
174. Holland R., Eer Nisse E.P. Design of Resonant Piezoelectric Devices 1969, The M.I.T Press, Cambridge, MA.
175. Ulitko A.F. Theory of electromechanical energy conversion in nonuniformly deformable piezoeceramics. Sovjet Appl. Mech. 1977, 1055.
176. M. McDonald, Crosstalk study of a high speed shear mode piezo inkjet printhead, in: Proc. IS&T's NIP15, 1999, p. 40.
177. G. Beurer, J. Kretschmer, Function and performance of a shear mode piezo printhead, in: Proc. IS&T's NIP13, 1997, p. 621.
178. J. Kretschmer, G. Beurer, Design parameters of a shear mode piezo printhead for a given resolution, in: Proc. IS&T's NIP13, 1997, p. 626.
179. Tijdeman H. On the propagation of sound waves in cylindrical tubes. J. Sound Vib. 1975, 39:1.
180. Beltman M., van de Hoogt P., Spiering R., Tijdeman H. Air loads on a rigid plate oscillating normal to a fixed surface. J. Sound Vib. 1997, 206:217.
181. Beltman W.M. Viscothermal wave propagation including acousto-elastic interaction I Theory. J. Sound Vib. 1999, 227(3):555.
182. Beltman W.M. Viscothermal wave propagation including acousto-elastic interaction II Applications. J. Sound Vib. 1999, 227(3):587.
183. Kergomard J., Bruneau M., Bruneau A.M., Herzog Ph. On the propagation constant of higher modes in a cylindrical waveguide. J. Sound Vib. 1988, 126:178.
184. M. Beltman, Viscothermal wave propagation including acousto-elastic interaction, Ph.D. Thesis, University of Twente, Enschede, 1998.
185. Fox M.J.H., Whitton P.N. The damping of structural vibrations by thin gas films. J. Sound Vib. 1980, 73:279.
186. Bruneau M., Herzog Ph., Kergomard J., Polack J.D. General formulation of the dispersion equation in bounded visco-thermal fluid. Wave Motion 1989, 11:441.
187. Chow L.C., Pinnington R.J. Practical industrial method of increasing structural damping in machinery I Squeeze film damping with air. J. Sound Vib. 1987, 118:123.
188. Chow L.C., Pinnington R.J. Practical industrial method of increasing structural damping in machinery I Squeeze film damping with liquids. J. Sound Vib. 1989, 128:333.
189. Onsay T. Effects of layer thickness on the vibration response of a plate-fluid layer system. J. Sound Vib. 1993, 162:231.
190. T. Basten, Noise reduction by viscothermal acousto elastic interaction in double wall panels, Ph.D. Thesis, University of Twente, Enschede, 2001.
191. Basten T.G.H., van der Hoogt P.J.M., Spiering R.M.E.J., Tijdeman H. On the acousto-elastic behaviour of double-wall panels with viscothermal air layer. J. Sound Vib. 2001, 243(4):699.
192. Karra C., Akrout A., Hammami L., Haddar M. Simulation of viscothermal losses on the acoustic behaviour of a thin fluid layer enclosed between two oscillating plates. Build. Acoust. 2006, 13(2):113.
193. Plantier G., Bruneau M. Heat conduction effects on the acoustic response of a membrane separated by a very thin air film from a backing electrode. J. Acoustique 1990, 3:243.
194. Bruneau M., Bruneau A.M., Hamery P. An improved approach to modelling the behaviour of thin fluid films trapped between a vibrating membrane and a backing wall surrounded by a reservoir at the periphery. Acoustica 1993, 1:227.
195. Karra C., Ben Tahar M. Effects of entropic wave in vibro-acoustic interaction between vibrating membrane and thin fluid layer. Flow Turb. & Comb. 1999, 61(1):179.
196. Mehl J.B. Acoustic resonance frequencies of deformed spherical resonators. J. Acoust. Soc. Am. 1982, 71:1109.
197. Mehl J.B. Acoustic resonance frequencies of deformed spherical resonators II. J. Acoust. Soc. Am. 1986, 79:278.
198. Moldover M. Gas filled spherical resonators: theory and experiment. J. Acoust. Soc. Am. 1986, 79:253.
199. H. Tillema, Noise reduction of rotating machinery by viscoelastic bearing supports, Ph.D. Thesis, University of Twente, Enschede, 2003.
200. Veijola T., Torowski M. Compact damping models for laterally moving microstructures with gas-rarefaction effects. J. MEMS 2001, 10(2):263.
201. Veijola T. Compact model for squeezed film dampers with inertial and rarefied gas effects. J. Micromech. Microeng. 2004, 14(7):1109.
202. Veijola T. A two-port model for wave propagation along a long circular microchannel. Microfluidics Nanofluidics 2007, 3(3):359.
203. Makarov S., Ochmann S. Non-linear and thermoviscous phenomena in acoustics part I. Acustica 1997, 83:197.
204. Batchelor G.K. An Introduction to Fluid Dynamics 1970, Cambridge University Press.
205. Moser M. Damping of structure born sound by the viscosity of a layer between two plates. Acustica 1980, 46:210.
206. Rott N. Damped and thermally driven acoustic oscillations. J. Appl. Math. Phys. 1969, 20:230.
207. F. van der Eerden, Noise reduction with coupled prismatic tubes, Ph.D. Thesis, University of Twente, Enschede, 2000.
208. Antohe B.V., Wallace D.B. Acoustic phenomena in a demand-mode piezoelectric inkjet printer. J. Imaging Sci. Technol. 2002, 46:409.
209. E. Manini, A. Scardovi, Experimental evaluation of reflections of acoustic waves in DOD systems, in: SPSE Proc. Adv. N.I.P Techn, 1982, p. 1092.
210. T. Kitahara, Ink jet head with multi-layer piezoelectric actuator, in: Proc. IS&T's NIP11, 1995, p. 346.
211. D.D. Darling, Frequency dependent fluidic inductance and resistance in inkjet passages, in: Proc. IS&T's NIP20, 2004, p. 877.
212. M. Hannink, Acoustic resonators for the reduction of sound radiation and transmission, Ph.D. Thesis, University of Twente, Enschede, 2007.
213. H. Fukumoto, H. Fukumoto, Y. Yokoyama, K. Endo, Y. Fujii, M. Takeda, Variable droplet size molten solder ejection tool for microelectronics packaging, in: Proc. IS&T's DF2006, 2006, p. 38.
214. S. Sakai, Dynamics of Piezoelectric Inkjet Printing Systems, in: Proc. IS&T's NIP26, 2000, p. 15.
215. Dijksman J.F. Hydrodynamics of small tubular pumps. J. Fluid. Mech. 1984, 139:173.
216. Trouton F.T. On the coefficient of viscous traction and its relation to that of viscosity. Proc. R. Soc. Lond. 1906, 77:426.
217. J.M. Cittadino, E. Mendes, A. Soucemarianadin, A tool for monitoring piezoelectric micro-pumps, in: Proc. IS&T's NIP21, 2005, p. 278.
218. Feng J.Q. A general fluid dynamic analysis of drop ejection in drop-on-demand ink jet devices. J. Imaging Sci. Technol. 2002, 46:398.
219. de Gennes P.G., Brochard-Wyart F., Quéré D. Capillarity and Wetting Phenomena 2003, Springer, Berlin.
220. Chen H.H., Brenner M.P. The optimal faucet. Phys. Rev. Lett. 2004, 92:166106.
221. McGuinness P., Drenckhan W., Weaire D. The optimal tap: three-dimensional nozzle design. J. Phys. D 2005, 38:3382.
222. Badea A., Carasso C., Panasenko G. A model of a homogenized cavity corresponding to a multinozzle droplet generator for continuous inkjet printers. Num. Meth. PDE 1998, 14:6.
223. Badea A., Capatina A., Carasso C. Optimization of a multinozzle inkjet printer. Comp. Methods Appl. Mech. Eng. 2001, 190:18.
224. Teng K.F. A mathematical model of impulse jet mechanism. Math. Comp. Modeling 1988, 11:751.
225. Teng K.F., Vest R.W. Mathematical models of inkjet printing in thick-film hybrid microelectronics. Appl. Math. Modeling 1988, 12(2):182.
226. Koltay P., Moosmann C., Litterst C., Streule W., Zengerle R. Simulation of a micro dispenser using lumped models. Proc. MSM2002 2002, 1:170.
227. S.D. Howkins, C.A. Willis, H. Nishimura, Cross-talk reduction by smart delay firing, in: Proc. IS&T's NIP20, 2004, p. 845.
228. M. McDonald, Continuous improvement: performance and reliability in shear mode piezo ink jet printing, in: Proc. IS&T's NIP17, 2001, p. 287.
229. T.G. Duby, Performance improvements for commercial piezo printhead, in: Proc. IS&T's NIP17, 2001, p. 328.
230. Burr R.F., Berger S.S., Tence D.A. Overview of phase change piezoelectric ink jet fluids modeling and design. Proc. ASME 1996, 239:545.
231. W. Letendre, S. Halwawala, B. Smith, Jetting and imaging performance of the M-300/10 Jet Module, in: Proc. IS&T's NIP22, 2006, p. 83.
232. J. Sumurel, Digital printing of bioinks, in: Proc. DF2006, 2006, p. 93.
233. N. Noto, T. Torii, S. Suematsu, K. Kugai, A new compact high resolution solid ink print head and its application to a plate making printer, in: Proc. IS&T's NIP14, 1998, p. 50.
234. Dijksman J.F. Hydro-acoustics of piezoelectric driven ink-jet print heads. Flow Turb. Comb. 1999, 61:211.
235. S. Ishikura, M. Hibi, Acoustic analysis on oscillatory behaviors in piezoelectric inkjet printhead, in: Proc. IS&T's NIP22, 2006, p. 75.
236. S. Ishikura, A. Matsumoto, Improvement in printing throughput for piezoelectric line inkjet printhead, in: Proc. IS&T's NIP23, 2007, p. 305.
237. J. Kretschmer, C. Tille, I. Ederer, A drop-on-demand inkjet printhead for a wide range of applications, in: Proc. IS&T's NIP14, 1998, p. 31.
238. S.C. Jung, H.S. Jang, J.H. Lee, B.S. Kim, K.G. Jang, A study on the improvement of the performance in injet head, in: Proc. IS&T's NIP15, 1999, p. 15.
239. S.S. Berger, G. Recktenwald, Development of an improved model for piezo-electric driven ink jets, in: Proc. IS&'s NIP19, 2003, p. 323.
240. Olsson A., Stemme G., Stemme E. A valve-less planar fluid pump with two
241. Scardovelli R., Zaleski S. Direct numerical simulation of free-surface and interfacial flow. Ann. Rev. Fluid Mech. 1999, 31:567.
242. Tryggvason G., Bunner B., Esmaeeli A., Juric D., Al-Rawahi N., Tauber W., Han J., Nas S., Jan Y.J. A front tracking method for the computations of multiphase flow. J. Comput. Phys. 2001, 169:708.
243. Hirt C.W., Cook J.L., Butler T.D. A Lagrangian method fot calculating the dynamics of an incompressible fluid with free surface. J. Comput. Phys. 1970, 5:103.
244. Hirt C.W., Amsden A.A., Cook J.L. An arbitrary Lagrangian-Eulerian computing method for all flow speeds. J. Comput. Phys. 1974, 14:227.
245. Ramaswamy B.J. Numerical simulation of unsteady viscous free surface flow. J. Comput. Phys. 1990, 90:396.
246. Wilkes E.D., Phillips S.D., Basaran O.A. Computational and experimental analysis of the dynamics of drop formation. Phys. Fluids 1999, 11:3577.
247. Ambravaneswaran B., Subramani H.J., Phillips S.D., Basaran O.A. Dripping-jetting transitions in a dripping faucet. Phys. Rev. Lett. 2004, 93(3):034501-1.
248. Longuet-Higgins M.S., Cokelet E.D. The deformation of steep surface waves on water. I. A numerical method of computation. Phil. Trans. R. Soc. Lond. A 1976, 350:1.
249. Tjahjadi M., Stone H.A., Ottino J.M. Satellite and subsatellite formation in capillary breakup. J. Fluid Mech. 1992, 243:297.
250. Mansour N.N., Lundgren T.S. Satellite formation in capillary jet breakup. Phys. Fluids 1990, A2:1141.
251. Day R.F., Hinch E.J., Lister J.R. Self-similar capillary pinchoff of an inviscis liquid. Phys. Rev. Lett. 1998, 80:704.
252. Schulkes R.M. The evolution and bifurcation of a pendant drop. J. Fluid Mech. 1994, 278:83.
253. Zhang D.F., Stone H.A. Drop formation in viscous flow at a vertically capillary tube. Phys. Fluids 1997, 9:2234.
254. von Ohnesorge W. Die Bildung und die Auflösung flüssiger Strahlen. Z. Angew. Math. Mech. 1936, 16:355.
255. Bergeron V., Bonn D., Martin J.Y., Vovelle L. Impact and retraction of viscoelastic drops. Nature 2000, 405:772.
256. Haenlein A. Über den zerfall eines flüssigkeitsstrahls. Forch. Geb. Ing. 1931, 2:139.
257. Eggers J. Nonlinear dynamics and breakup of free-surface flows. Rev. Mod. Phys. 1997, 69:865.
258. Jang D., Kim D., Moon J. Influence of fluid physical properties on inkjet printability. Langmuir 2009, 25:2629.
259. Harlow F.H., Welch J.E. Numerical calculation of time-dependent viscous incompressible flow. Phys. Fluids 1965, 8:2182.
260. Fromm J.E. Numerical calculation of fluid dynamics of drop on demand jets. IBM J. Res. Dev. 1984, 28:322.
261. Basaran O.A. Nonlinear oscillations of viscous liquid drops. J. Fluid Mech. 1992, 241:169.
262. Zhang X., Basaran O.A. An experimental study of dynamics of drop formation. Phys. Fluids 1995, 7:1184.
263. Richards J.R., Beris A.N., Lenhoff A.M. Drop formation in liquid-liquid systems before and after jetting. Phys. Fluids 1995, 7(11):2617.
264. Li J., Renardy Y.Y., Renardy M. Numerical simulation of breakup of a viscous drop in simple shear flow with a volume-of-fluid method. Phys. Fluids 2000, 12:269.
265. Summers J.L., Thompson H.M., Gaskell P.H. Flow structure and transfer jets in a contra-rotating rigid roll coating system. Theor. Comput. Fluid Dyn. 2004, 17(3):189.
266. J.T. Yeh, A VOF-FEM and coupled inkjet simulation, in: Proc. ASME Fluid Eng. Div., 2001, p. 1.
267. Wu H.C., Lin H.J., Hwang W.S. A numerical study of the effect of operating parameters on drop formation in a squeeze mode inkjet device. Modeling and Sim. Mat. Sci. Eng. 2005, 13:17.
268. C.L. Chiu, J.Ch. Yang, C.H. Liu, J.P. Hu, Ch.C. Chang, The numerical study on size effects of the inkjet print head, in: Proc. IS&T's NIP17, 2001, p. 319.
269. Osher S., Sethian J.A. Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations. J. Comput. Phys. 1988, 79:12.
270. Sussman M., Smereka P., Osher S.J. A level set approach to computing solutions to incompressible two-phase flow. J. Comput. Phys. 1994, 113:146.
271. Osher S.J., Fedkiw R.P. Level set methods: an overview and some recent results. J. Comput. Phys. 2001, 169:463.
272. Sethian J.A. Evolution, implementation, and application of level set and fast marching methods for advancing fronts. J. Comput. Phys. 2001, 169:503.
273. Sussman M., Pucket E.G. A coupled level set and volume-of-fluid method for computing 3D and axisymmetric incompressible two-phase flows. J. Comput. Phys. 2000, 162:301.
274. J.D. Yu, S. Sakai, Piezo inkjet simulations using the finite difference level set method and equivalent circuit, in: Proc. IS&T's NIP19, 2003, p. 319.
275. Yu J.D., Sakai S., Sethian J. A coupled quadrilateral grid level set projection method applied to ink jet simulations. J. Comput. Phys. 2005, 206:1.
276. H.M.A. Wijshoff, Modeling the drop formation process in inkjet printheads, in: Flow3D News spring2007, 2007, p. 4. Flow3D is CFD software developed by Flow Science Inc., Santa Fe, New Mexico.
277. Nichols B.D., Hirt C.W. Numerical simulations of BWR vent-clearing hydrodynamics. Nucl. Sci. Eng. 1980, 73:196.
278. Hirt C.W., Nichols B.D. Volume of Fluid (VOF) method for the dynamics of free boundaries. J. Comput. Phys. 1981, 39:201.
279. de Jong J., Reinten H., van den Berg M., Wijshoff H., Versluis M., de Bruin G., Lohse D. Air entrapment in piezo-driven inkjet printheads. J. Acoust. Soc. Am. 2006, 120:1257.
280. Zhang X. Dynamics of growth and breakup of pendant drops into air. J. Colloid Interface Sci. 1999, 212:107.
281. Michael D.H., Williams P.G. The equilibrium and stability of axi-symmetric pendant drops. Proc. R. Soc. Lond. A 1976, 351:117.
282. Clanet Chr., Lasheras J.C. Transition from dripping to jetting. J. Fluid. Mech. 1999, 383:307.
283. Henderson D.M., Pritchard W.G., Smolka L.B. On the pinch-off of a pendant drop of viscous liquid. Phys. Fluids 1997, 11:3188.
284. Tyler E., Watkin F. Experiments with capillary jets. Phil. Mag. 1932, 14:849.
285. Martien P., Pope S.C., Scott P.L., Shaw R.S. The chaotic behavior of the leaky faucet. Phys. Lett. 1985, 110A:399.
286. d'Innocenzo A., Renna L. Dripping faucet. Int. J. Theor. Phys 1996, 35:941.
287. Pugh M.C., Shelley M.J. Singularity formation in models of thin jets with surface tension. Comm. Pure Appl. Math. 1998, 51:733.
288. Lowengrub J., Truskinovski L. Quasi-compressible Cahn-Hilliard fluids and topological transitions. Proc. R. Soc. Lond. A 1998, 454:2617.
289. Eggers J. Drop formation - an overview. Z. Angew. Math. Mech. 2005, 85(6):400.
290. Ranz W.E. Some experiments on orifice sprays. Can. J. Chem. Eng. 1958, 36:175.
291. Stone H.A., Bentley B.J., Leal L.G. An experimental study of transient effects in the breakup of viscous drops. J. Fluid Mech. 1986, 173:131.
292. Clift R., Grace J.R., Weber M.E. Bubbles, Drops, and Particles 1978, Academic Press, New York.
293. Heideger W.J., Wright M.W. Liquid extraction during drop formation: effect of formation time. AIChE J. 1986, 32:1372.
294. Goedde E.F., Yuen M.C. Experiments on liquid jet instability. J. Fluid Mech. 1970, 40:495.
295. Chen A.U., Notz P.K., Basaran O.A. Computational and experimental analysis of pinch-off and scaling. Phys. Rev. Lett. 2002, 88:174501.
296. Lugli F., Zerbetto F. Atomistic simulation of drop-on-demand inkjet dynamics. J. Phys. Chem. C 2008, 112(29)):19616.
297. Wijshoff H.M.A. Drop formation mechanisms in piezo-acoustic inkjet. Proc. Nanotech2007 2007, 3:448.
298. Kowalewski T.A. On the separation of droplets from a liquid jet. Fluid Dyn. Res. 1996, 17:121.
299. Lister J.R., Stone H.A. Capillary breakup of a viscous thread surrounded by another viscous fluid. Phys. Fluids 1998, 10:2758.
300. Lin S.P. Breakup of Liquid Sheets and Jets 2003, Cambridge University Press.
301. Fawehinmi O.B., Gaskell P.H., Jimack P.K., Kapur N., Thompson H.M. A combined experimental and computational fluid dynamics analysis of the dynamics of drop formation. Proc. ImechE 2005, 219C:1.
302. Brackbill J.U., Kothe D.B., Zemach C. A continuum method for modelling surface tension. J. Comput. Phys 1992, 100:335.
303. Eggers J., Dupont T.F. Drop formation in a one-dimensional approximation of the Navier-Stokes equation. J. Fluid Mech. 1994, 161:205.
304. Papageorgiou D.T. On the breakup of viscous liquid threads. Phys. Fluids 1995, 7:1529.
305. Reynolds O. On the theory of lubrication and its application to Mr. Beauchamp tower's experiments, including an experimental determination of the viscosity of olive oil. Phil. Trans. R. Soc. 1886, 177:157.
306. Cram L.E. A numerical model of drop formation. Computational Techniques and Applications 1984, Elsevier. J. Noye, C. Fletcher (Eds.).
307. Ambravaneswaran B., Phillips S.D., Basaran O.A. Theoretical analysis of a dripping faucet. Phys. Rev. Lett. 2000, 85:5332.
308. Yildrim O.E., Xu Q., Basaran O.A. Analysis of the drop weight method. Phys. Fluids 2000, 17:062107.
309. Fuchikami N., Ishioka S., Kiyono K. Simulation of a dripping faucet. J. Phys. Soc. Japan 1999, 68:1185.
310. Coullet P., Mahadevan L., Riera C.S. Hydrodynamical models for the chaotic dripping faucet. J. Fluid Mech. 2005, 526:1.
311. Subramani H.J., Yeoh H.K., Suryo T., Xu Q., Abravaneswaran B., Basaran O.A. Simplicity and complexity in a dripping faucet. Phys. Fluids 2006, 18:032106.
312. Landau F.D., Lifshitz E.M. Fluid Mechanics 1984, Pergamon, Oxford.
313. Bechtel S.E., Forest M.G., Lin K.J. Closure to all orders in 1-D models for slender viscoelastic free jets: an integrated theory for axisymmetric, torsionless flows. Stab. Appl. Anal. Cont. Media 1992, 2:59.
314. Ambravaneswaran B., Wilkes E.D., Basaran O.A. Drop formation from a capillary tube: comparison of one-dimensional and two-dimensional analyses and occurrence of satellite drops. Phys. Fluids 2002, 14:2606.
315. Koltay P., Moosmann C., Litterst C., Streule W., Birkenmeier B., Zengerle R. Modeling free jet ejection on a system level - an approach for microfluidics. Proc. MSM2002 2002, 1:112.
316. Shin D.Y., Grassia P., Derby B. Numerical and experimental comparisons of mass transport rate in a piezoelectric drop-on-demand inkjet print head. Int. J. Mat. Sci. 2004, 46:181.
317. Shin D.Y., Grassia P., Derby B. Oscillatory incompressible fluid flow in a tapered tube with a free surface in an inkjet printhead. J. Fluids Eng. 2005, 127(1):98.
318. Goldstein R.E., Pesci A.I., Shelley M.J. Topology transitions and singularities in viscous flows. Phys. Rev. Lett. 1993, 70:3043.
319. Constantin P., Dupont T.F., Goldstein R.E., Kadanoff L.P., Shelley M.J., Zhou S.M. Droplet breakup in a model of the Hele-Shaw cell. Phys. Rev. 1993, E47:4169.
320. Lafaurie B., Nardone C., Scardovelli R., Zaleski S., Zanetti G. Modeling merging and fragmentation in multiphase flow with SURFER. J. Comput. Phys. 1994, 113:134.
321. Eggers J. Theory of drop formation. Phys. Fluids 1995, 7(5):941.
322. Eggers J. Breakup and coalescence of free surface flows. Handbook of Materials Modeling 2005, Springer. S. Yip (Ed.).
323. Eggers J., Villermaux E. Physics of liquid jets. Rep. Progr. Phys. 2008, 71:036601.
324. Keller J.B., Miksis M.J. Surface tension driven flows. SIAM J. Appl. Math. 1983, 43:268.
325. Ting L., Keller J.B. Slender jets and thin sheets with surface tension. SIAM J. Appl. Math. 1990, 50:1533.
326. I.M. Hutchings, G.D. Martin, S.D. Hoath, R.H. Morgan, Proc. IS&T's NIP22, 2006, p. 91.
327. Eggers J. Universal pinching of 3D axisymmetric free-surface flow. Phys. Rev. Lett. 1993, 71:3458.
328. Brenner M.P., Lister J.R., Stone H.A. Pinching threads, singularities and the number 0.0304 ..., Phys. Fluids 1996, 8:2827.
329. Peregrine D.H., Shoker G., Symon A. The bifurcation of liquid bridges. J. Fluid. Mech. 1990, 212:25.
330. Eggers J. Singularities in droplet pinching with vanishing viscosity. SIAM J. Appl. Mech. 2000, 60:1997.
331. Brenner M.P., Eggers J., Joseph K., Nagel S.R., Shi X.D. Breakdown of scaling in droplet fission at high Reynolds number. Phys. Fluids 1997, 9:1573.
332. Chen Y.C., Steen P.H. Dynamics of inviscid capillary breakup: collapse and pinch-off of a film bridge. J. Fluid Mech. 1997, 341:245.
333. Notz P.K., Chen A.U., Basaran O.A. Satellite drops: unexpected dynamics and change of scaling during pinch-off. Phys. Fluid 2001, 13:549.
334. Barenblatt G. Similarity, Self-Similarity and Intermediate Asymptotics 1996, Cambridge University Press.
335. Rothert A., Richter R., Rehberg I. Transition from symmetric to asymmetric scaling function before drop pinch-off. Phys. Rev. Lett. 2001, 87:084501.
336. Rothert A., Richter R., Rehberg I. Formation of a drop: viscosity dependence of three flow regimes. New J. Phys. 2003, 5:59.
337. P. Pierron, S. Alleman, A. Soucemarianadin, Dynamics of jetted liquid filaments, in: Proc. IS&T's NIP17, 2001, p. 308.
338. B. Lopez, D. Vadillo, P. Pierron, A. Soucemarianadin, Transient phenomena during drop formation in DOD printing, in: Proc. IS&T's NIP18, 2002, p. 170.
339. Grundy R.E. Local similarity solutions for the initial-value problem in non-linear diffusion. IMA J. Appl. Math. 1983, 30:209.
340. Sierou A., Lister J. Self-similar recoil of inviscid drops. Phys. Fluids 2004, 16:1379.
341. Milosevic I.N., Longmire E.K. Pinch-off modes and satellite formation in liquid-liquid jet systems. Int. J. Multiphase Flow 2002, 28:1853.
342. Taylor G.I. The dynamics of thin sheets of fluid III: disintegration of fluid sheets. Proc. R. Soc. Lond. 1959, A253:313.
343. P. Pierron, E. Auboussier, C. Schlemer, N. Galley, Influence of transducer control in dod printing, in: Proc. IS&T's NIP16, 2000, p. 56.
344. Brenner M.P., Shi X.D., Nagel S.R. Iterated instabilities during droplet fission. Phys. Rev. Lett. 1994, 73:3391.
345. Shi X.D., Brenner M.P., Nagel S.R. A cascade of structure in a drop falling from a faucet. Science 1994, 265:219.
346. Kawano S. Molecular dynamics of rupture phenomena in a liquid thread. Phys. Rev. 1998, E58:4468.
347. Moseler M., Landman U. Formation, stability, and breakup of nanojets. Science 2000, 289:1165.
348. Eggers J. Dynamics of liquid nanojets. Phys. Rev. Lett. 2002, 89:084502.
349. Hennequin Y., Aarts D.G.A.L., van der Wiel J.H., Wegdam G., Eggers J., Lekkerkerker H.N.W., Bonn D. Drop formation by thermal fluctuations at an ultralow surface tension. Phys. Rev. Lett. 2006, 97:244503.
350. Schlichting H. Boundary layer theory 1979, McGraw-Hill Book Company, New York.
351. Lee H.C. Boundary layer around a liquid jet. IBM J. Res. Dev. 1977, 21:48.
352. Beulen B., de Jong J., Reinten H., van den Berg M., Wijshoff H., van Dongen R. Flows on the nozzle plate of an inkjet printhead. Exp. Fluids 2007, 42:217.
353. Bogy D.B. Drop formation in a circular liquid jet. Ann. Rev. Fluid Mech. 1979, 11:207.
354. Gonzales-Mendizabal D., Olivera-Fuentes C., Guzman J.M. Hydrodynamics of laminar liquid jets. Experimental study and comarison with two models. Chem. Eng. Comm. 1987, 56:117.
355. Adachi K., Tagashira K., Banda Y., Machida H., Yoshioka N. Steady laminar round jets pf a viscous liquid falling vertically in the atmosphere. AIChE J. 1990, 36:738.
356. Richards J.R., Beris A.N., Lenhoff A.M. Steady laminar flow of liquid-liquid jets at high Reynolds numbers. Phys. Fluids 1993, A5:1703.
357. Chandrasekhar S. Hydrodynamic and Hydromagnetic Stability 1961, Dover.
358. Rutland D.F., Jameson G.J. Theoretical prediction of the sizes of drops formed in the breakup of capillary jets. Chem. Eng. Sci. 1970, 25:1689.
359. Zhang X. Dynamics of drop formation in viscous flows. Chem. Eng. Sci. 1999, 54:1759.
360. Renardi Y., Renardi M. PROST: a parabolic reconstruction of surface tension for the volume-of-fluid method. J. Comput. Phys. 2002, 183:400.
361. Hilbing J.H., Heister S.D. Droplet size control in liquid jet breakup. Phys. Fluids 1996, 8:1574.
362. Chaudhary K.C., Maxworthy T. The nonlinear capillary instability of a liquid jet. Part 3. Experiments on satellite drop formation and control. J. Fluid Mech. 1980, 96:287.
363. Xing J.H., Boguslawsky A., Soucemarianadin A., Atten P., Attané P. Experimental investigation of capillary instability: results on jet stimulated by pressure modulations. Exp. Fluids 1996, 20:302.
364. Tomotika S. Breaking up of a drop of viscous liquid immersed in another viscous fluid which is extending at a uniform rate. Proc. R. Soc. Lond. A 1936, 153:302.
365. Stone H.A. Dynamics of drop deformation and breakup in viscous fluids. Ann. Rev. Fluid Mech. 1994, 26:65.
366. Cheong B.S., Howes T. Capillary jet instability under the influence of gravity. Chem. Eng. Sci. 2004, 59:2145.
367. Cheong B.S., Howes T. Effect of initial disturbance amplitude in gravity affected jet break-up. Chem. Eng. Sci. 2005, 60:3715.
368. Trinh E., Wang T.G. Large amplitude free and driven drop-shape oscillations: experimental observations. J. Fuid. Mech. 1982, 122:315.
369. Eggers J., Lister J.R., Stone H.A. Coalescence of liquid drops. J. Fluid Mech. 1999, 401:293.
370. Duchemin L., Eggers J., Josserand C. Inviscid coalescence of drops. J. Fluid Mech. 2003, 487:167.
371. Ashgriz N., Poo J.Y. Coalescence and separation in binary collisions of liquid drops. J. Fluid. Mech. 1990, 221:183.
372. Dong H., Carr W.W., Morris J.F. An experimental study of drop-on-demand drop formation. Phys. Fluids 2006, 18:072102.
373. Xu Q., Basaran O.A. Computational analysis of drop-on-demand drop formation. Phys. Fluids 2007, 19:102111.
374. B. Barbet, P. Atten, A. Soucemarianadin, Capillary instability of a jet induced by surface tension modulations, in: Proc. IS&T's NIP13, 1997, p. 604.
375. Bauer H.F. Free liquid surface response induced by fluctuations of thermal Marangoni convection. AIAA J. 1984, 22:421.
376. Mashayek F., Ashgriz N. Nonlinear instability of liquid jets with thermocapillarity. J. Fluid Mech. 1995, 283:97.
377. Ashgriz N., Mashayek F. Temperal analysis of capillary jet breakup. J. Fluid Mech. 1995, 291:163.
378. Furlani E.P., Delemetter C.N., Chwalek J.M., Trauernicht D.P. Surface tension induced instability of viscous liquid jets. Proc. MSM2001 2001, 1:186.
379. Furlani E.P. Temporal instability of viscous liquid microjets with spatially varying surface tension. J. Physics A 2005, 38:263.
380. Furlani E.P. Thermal modulation and instability of Newtonian liquid microjets. Proc. Nanotech2005 2005, 1:668.
381. Yildrim O.E., Basaran O.A. Deformation and breakup of stretching bridges of Newtonian and shear-thinning liquids: comparison of one- and two-dimensional models. Chem. Eng. Sci. 2001, 56:211.
382. Coussot P., Gaulard F. Gravity flow instability of viscoplastic materials: the "ketchup drip". Phys. Rev. E 2005, 72:031409.
383. Fel L.G., Zimmels Y. Plateau instability of a liquid crystalline cylinder in a magnetic field. J. Colloid Interface Sci. 2005, 288:553.
384. Grisenti R.E., Toennies J.P. Cryogenic micro-jet source for orthotropic beams of ultra-large superfluid helium droplets. Phys. Rev. Lett. 2003, 90:234501.
385. Möbius M.E. Clustering instability in a freely falling granular jet. Phys. Rev. E 2006, 74:051304.
386. de Gans B.J., Duineveld P.C., Schubert U.S. Inkjet printing of polymers: state of the art and future developments. Adv. Mater. 2004, 16:203.
387. Goldin M., Yerushalmi J., Pfeffer R., Shinnar R. Breakup of a laminar capillary jet of a viscoelastic fluid. J. Fluid Mech. 1969, 38:689.
388. Christanti Y., Walker L.M. Effect of fluid relaxation time on jet breakup due to a forced disturbance of polymer solutions. J. Rheol. 2002, 47:733.
389. Bird R.B., Armstrong R.C., Hassager O. Dynamics of Polymeric Liquids I. Fluid Mechanics II. Kinetic Theory 1987, Wiley, New York.
390. Goren S.L., Gottlieb M. Surface-tension-driven breakup of viscoelastic liquid threads. J. Fluid Mech. 1982, 120:245.
391. Amarouchene Y., Bonn D., Meunier J., Kellay H. Inhibition of a finite time singularity in droplet fission of polymeric fluids. Phys. Rev. Lett. 2001, 86:3558.
392. D. Xu, V. Sanchez-Romaguera, S. Barbosa, W. Travis, J.S. de Wit, P. Swan, S.G. Yeates, Inkjet printing of polymer solutions in the semi-dilute regime, in: Proc. IS&T's NIP23, 2007, p. 104.
393. S. Hoath, G. Martin, T. Tuladhar, M. Mackley, I. Hutchings, Links between fluid rheology and drop-on-demand jetting and printability, in: Proc. IS&T's NIP24 and DF2008, 2008, p. 130.
394. R.J. Furbank, J.F. Morris, Droplet formation from particulate suspensions, in: Proc. IS&T's NIP17, 2001, p. 304.
395. Furbank R.J., Morris J.F. An experimental study of particle effects on drop formation. Phys. Fluids 2004, 16:1777.
396. Pimbley W.T., Lee H.C. Satellite droplet formation in a liquid jet. IBM J. Res. Dev. 1977, 21:21.
397. Keller J.B., Rubinow S.I., Tu Y.O. Spatial instability of a jet. Phys. Fluids 1973, 16:2052.
398. Pimbley W.T. Drop formation from a liquid jet: a linear one-dimensional analysis considered as a boundary value problem. IBM J. Res. Dev. 1976, 20:148.
399. Yuen M.C. Non-linear capillary instability of a liquid jet. J. Fluid Mech. 1968, 33:151.
400. Lee H.C. Drop formation in a liquid jet. IBM J. Res. Dev. 1974, 18:364.
401. Schulkes R.M. The contraction of liquid filaments. J. Fluid Mech. 1996, 309:277.
402. Notz P.K., Basaran O.A. Dynamics and breakup of a contracting liquid filament. J. Fluid Mech. 2004, 512:223.
403. H. Dong, Drop on demand inkjet drop formation and depositions, Ph.D. Thesis, Georgia Institute of Technology, 2006.
404. Henderson D.M., Segur H., Smolka L.B., Wadati M. The motion of a falling liquid filament. Phys. Fluids 2000, 12:550.
405. H.M.A. Wijshoff, Manipulating drop formation in piezo acoustic inkjet, in: Proc. IS&T's NIP22, 2006, p. 79.
406. M. Kanaya, MACH for pigment ink, in: Proc. IS&T's NIP19, 2003, p. 280.
407. D.D. Darling, Driving waveforms to reduce voltage requirements of inkjets, in: Proc. IS&T's NIP20, 2004, p. 851.
408. M. McDonald, New advances in piezoelectric carbon printhead technology, in: Proc. IS&T's NIP24 and DF2008, 2008, p. 117.
409. M. Usui, et al., The development of pigment ink for plain paper, in: Proc. IS&T's NIP18, 2002, p. 369.
410. M.B. Groot Wassink, Enabling higher fetting frequencies for inkjet printheads using Iterative Learning Control, in: Proc. IS&T's NIP 21, 2005, p. 273.
411. R.L. Adams, The printing technology of the Tektronix Phaser340, in: Proc. IS&T's NIP11, 1995, p. 280.
412. Adams R.L. The printing technology of the Tektronix Phaser340. J. Imaging Sci. Technol. 1996, 40:383.
413. Chen A.U., Basaran O. A new method for significantly reducing drop radius without reducing nozzle radius in drop-on-demand drop production. Phys. Fluids 2002, 14:L1.
414. Chr. Rensch, Creation of small microdrops, MicroFab Technical note, October, 2006.
415. Huh C., Scriven L.E. Hydrodynamic model of steady movement of a solid/liquid/fluid contact line. J. Colloid Interface Sci. 1971, 35:85.
416. Pisman L., Pomeau Y. Disjoining potential and spreading of thin liquid layers in the diffuse-interface model coupled to hydrodynamics. Phys. Rev. E 2000, 62:2480.
417. Poulard C., Cazabat A.A. Spontaneous spreading of nematic liquid crystals. Langmuir 2005, 21:6270.
418. Stemme E., Stemme G. A valveless diffuser/nozzle-based fluid pump. Sensors Actuators 1993, A39:159.
419. de Jong J., Reinten H., Wijshoff H., van den Berg M., Delescen K., van Dongen R., Mugele F., Versluis M., Lohse D. Marangoni flow on an inkjet nozzle plate. Appl. Phys. Lett. 2007, 91:204102.
420. Oron A., Davis S.H., Bankoff S.G. Long-scale evolution of thin liquid films. Rev. Mod. Phys. 1997, 69(3):931.
421. de Gennes P.G. Wetting: statics and dynamics. Rev. Mod. Phys. 1985, 57(3):827.
422. I. Yildrim, Surface free energie characterization of powders, Ph.D. Thesis, Virginia State University, 2001.
423. Bauer C., Dietrich S. Wetting films on chemically heterogeneous substrates. Phys. Rev. E 1999, 60:6919.
424. Moosavi A., Rauscher M., Dietrich S. Motion of nanodroplets near edges and wedges. Phys. Rev. Lett. 2006, 97:236101.
425. Moosavi A., Rauscher A., Dietrich S. Motion of nanodroplets near chemical heterogeneities. Langmuir 2008, 24:734.
426. Swain P., Lipowsky R. Contact angle on heterogeneous surfaces: a new look at Cassie and Wenzel's laws. Langmuir 1998, 14:6772.
427. Bico J., Thiele U., Quéré D. Wetting on textured surfaces. Colloids Surf. A 2002, 206:41.
428. Joanny F.F., de Gennes P.G. Model for contact angle hysteresis. J. Chem. Phys. 1984, 11:552.
429. Cazabat A., Stuart M.A.C. Dynamics of wetting-effects of surface roughness. J. Phys. Chem. 1986, 90:5845.
430. Kusumaatmaja H., Yeomans J.M. Modeling contact angle hysteresis on chemically patterned and superhydrophobic surfaces. Langmuir 2007, 23:6019.
431. Patankar N.A. On the modeling of hydrophobic contact angles on rough surfaces. Langmuir 2003, 19:1249.
432. Zhou X.B., de Housson J.Th.M. Influence of surface roughness on the contact angle. J. Mater. Res. 1995, 10:1984.
433. Bico J., Marzolin C., Quéré D. Pearl drops. Europhys. Lett. 1999, 47:220.
434. Marmur A. Wetting on real surfaces. J. Imaging Sci. Technol. 2000, 44:406.
435. Reiter G. Dewetting of thin polymer films. Phys. Rev. Lett. 1992, 68:75.
436. Jacobs K., Herminghaus S., Mecke K.R. Thin liquid polymer film rupture via defects. Langmuir 1998, 14:965.
437. Konnur R., Kargupta K., Sharma A. Instability and morphology of thin liquid films on chemically heterogeneous substrates. Phys. Rev. Lett. 2000, 84:931.
438. Kargupta K., Sharma A. Templating of thin films induced by dewetting on patterned surfaces. Phys. Rev. Lett. 2001, 86:4536.
439. Ruckenstein E., Jain R. Spontaneous rupture of thin films. J. Chem. Soc. Faraday Trans. II 1974, 70:132.
440. Williams M., Davis S. Nonlinear theory of film rupture. J. Colloid Interface Sci. 1982, 90:220.
441. Sharma A., Reiter G. Instability of thin polymer films on coated substrates: rupture, dewetting, and drop formation. J. Colloid Interface Sci. 1996, 178:383.
442. Seemann R., Herminghaus S., Jacobs K. Dewetting patterns and molecular forces: a reconciliation. Phys. Rev. Lett. 2001, 86:5534.
443. Lighthill M.J. Waves in Fluids 1978, Cambridge University Press.
444. Lutz B.R., Chen J., Schwartz D.T. Microfluidics without microfabrication. Proc. Natl. Ac. Sci. 2003, 100:4395.
445. Marmottant P., Hilgenfeldt S. Controlled vesicle deformation and lysis by single oscillating bubbles. Nature 2003, 423:153.
446. Squires T.M., Quake S.R. Microfluidics: Fluid physics at nanoliter scale. Rev. Mod. Phys. 2005, 77(3):977.
447. Wasan D.T., Nikolov A.D., Brenner H. Droplets speeding on surfaces. Science 2001, 291:605.
448. Snoeijer J.H., Delon G., Fermigier M., Andreotti B. Avoided critical behavior in dynamically forced wetting. Phys. Rev. Lett. 2006, 96:174504.
449. Simpkins P.G., Kuck V.J. On air entrainment in coatings. J. Colloid Interface Sci. 2003, 263:562.
450. Duez C., Ybert C., Clanet C., Bocquet L. Making a splash with water repellency. Nature Phys. 2007, 3:180.
451. Blake T.D., Ruschak K.J. A maximum speed of wetting. Nature 1979, 282:489.
452. Sedev R.V., Petrov J.G. The critical condition for transition from steady wetting to film entrainment. Colloids Surf. 1991, 53:147.
453. Podgorski T., Flesselles J.M., Limat L. Corners, cusps, and pearls in running drops. Phys. Rev. Lett. 2001, 87:036102.
454. Leger L., Joanny J. Liquid spreading. Rep. Progr. Phys. 1992, 55:431.
455. Blake T.D., Shikhmurzaev Y.D. Dynamic wetting by liquids of different viscosity. J. Colloid Interface Sci. 2002, 253:196.
456. Eggers J., Evans R. Comment on dynamic wetting by liquids of different viscosity. J. Colloid Interface Sci. 2004, 280:537.
457. Shikhmurzaev Y.D., Blake T.D. Response to the comment by J. Eggers and R. Evans. J. Colloid Interface Sci. 2004, 280:539.
458. Thompson P.A., Robbins M.O. Simulations of contact line motion - slip and the dynamic contact angle. Phys. Rev. Lett. 1989, 63:766.
459. de Ruijter M.J., Blake T.D., de Coninck J. Dynamic wetting studied by molecular modeling simulations of droplet spreading. Langmuir 1999, 15:7836.
460. Voinov O.V. Hydrodynamics of wetting. Fluid Dynamics 1976, 11:714.
461. Starov V.M., Kalinin V.V., Chen J.D. Spreading of liquid drops over solid substrates. Adv. Colloid Interface Sci. 1994, 50:187.
462. Middleman S. Modeling Axisymmetric Flow 1995, Academic Press.
463. Hocking L.M. A moving fluid interface on a rough surface. J. Fluid Mech. 1976, 76:801.
464. Dodge F.T. The spreading of liquid droplets on solid surfaces. J. Colloid Interface Sci. 1988, 121:154.
465. Barrat J.L., Bocquet L. Large slip effect at a nonwetting fluid-solid interface. Phys. Rev. Lett. 1999, 82:4671.
466. Cottin-Bizonne C., Cross B., Steinberger A., Charlaix E. Boundary slip on smooth hydrophobic surfaces: intrinsic effets and possible artifacts. Phys. Rev. Lett. 2005, 94:056102.
467. Lyklema J. Fundamentals of Interface and Colloid Science vol. III: Liquid-Fluid Interfaces 2000, Academic Press.
468. Darhuber A.A., Troian S.M. Principles of microfluidic actuation by modulation of surface stresses. Ann. Rev. Fluid Mech. 2005, 37:425.
469. Jensen O.E., Grotberg J.B. Insoluble surfactant spreading on a thin viscous film: shock evolution and film rupture. J. Fluid Mech. 1992, 240:59.
470. Jensen O.E., Grotberg J.B. The spreading of heat or soluble surfactant on a thin liquid film. Phys. Fluids 1993, A5:58.
471. Matar O.K. Nonlinear evolution of thin free viscous films in the presence of soluble surfactant. Phys. Fluids 2002, 14:4216.
472. Yeo L.Y., Matar O.K., Ortiz E.S.P., Hewitt G.F. The dynamics of Marangoni-driven local film drainage between two drops. J. Colloid Interface Sci. 2001, 241:233.
473. Hardy W.B. The spreading of fluids on glass. Phil. Mag. 1919, 38:49.
474. Heslot F., Fraysse N., Cazabat A.M. Molecular layering in the spreading of wetting liquid drops. Nature 1989, 338:640.
475. Valignat M.P., Oshanin G., Villette S., Cazabat A.M., Moreau M. Molecular weight dependence of spreading rates of ultrathin polymeric films. Phys. Rev. Lett. 1998, 80:5377.
476. Darhuber A.A., Reisner W.W., Troian S.M. Dynamics of capillary spreading along hydrophilic microstripes. Phys. Rev. 2001, 64:031603.
477. Darhuber A.A., Davis J.M., Reisner W.W., Troian S.M. Thermocapillary actuation of liquid flow on chemically patterned surfaces. Phys. Fluids 2003, 15:1295.
478. Brock J.D., Cohen I.M., Ivanov I.P., Le H.P., Roy J. Oscillations of an air bubble in an ink jet. J. Imaging Sci. Technol. 1984, 10:127.
479. Hine N.P. Deaeration system for a high-performance drop-on- demand ink jet. J. Imaging Technol. 1991, 17:223.
480. Liggieri L., Ravera F., Passerone A. Drop formation instabilities induced by entrapped gas bubbles. J. Colloid Interface Sci. 1990, 140:436.
481. Plesset M.S., Prosperetti A. Bubble dynamics and cavitation. Ann. Rev. Fluid Mech. 1977, 9:145.
482. Leighton T.G. The Acoustic Bubble 1994, Academic Press, London.
483. Jeurissen R., de Jong J., Reinten H., van den Berg M., Wijshoff H., Versluis M., Lohse D. The effect of an entrained air bubble on the acoustics of an ink channel. J. Acoust. Soc. Am. 2008, 123:2496.
484. de Jong J., Versluis M., de Bruin G., Lohse D., Reinten H., van den Berg M., Wijshoff H., de Jong N. Acoustical and optical characterization of air entrapment in piezo-driven inkjet printheads. Proc. IEEE-IUS 2005, 2:1270.
485. de Jong J., Jeurissen R., Borel H., van den Berg M., Wijshoff H., Reinten H., Versluis M., Prosperetti A., Lohse D. Entrapped air bubbles in piezo-driven inkjet printing: their effect on the droplet velocity. Phys. Fluids 2006, 18:121511.
486. D. Lohse, J. de Jong, M. Versluis, M. van den Berg, H. Wijshoff, H. Reinten, Disturbing bubbles in piezo-acoustic printing, in: Proc. 6th EFMC, 2006, p. 369.
487. Prosperetti A., Hao Y. Modelling of spherical gas bubble oscillations. Phil. Trans. R. Soc. Lond. A 1999, 357:203.
488. Hao Y., Prosperetti A. The effect of viscosity on the spherical stability of oscillating gas bubbles. Phys. Fluids 1999, 11:1309.
489. Hao Y., Prosperetti A. The dynamics of vapor bubbles in acoustic pressure fields. Phys. Fluids 1999, 11:2008.
490. Brennen C.E. Cavitation and Bubble Dynamics 1995, Oxford University Press.
491. Hilgenfeldt S., Lohse D., Brenner M.P. Phase diagrams for sonoluminiscescing bubbles. Phys. Fluids 1996, 8:2808.
492. Hilgenfeldt S., Brenner M.P., Grossmann S., Lohse D. Analysis of Rayleigh-Plesset dynamics for sonoluminescing bubbles. J. Fluid Mech. 1998, 365:171.
493. Hilgenfeldt S., Lohse D. Predictions for upscaling sonoluminescence. Phys. Rev. Lett. 1999, 82:1086.
494. Blake J.R., Hooton M.C., Robinson P.B., Tong R.P. Collapsing cavities, toroidal bubbles and jet impact. Phil. Trans. R. Soc. Lond. A 1997, 355:537.
495. Tong R.P., Schiffers W.P., Shaw S.J., Blake J.R., Emmony D.C. The role of splashing in the collapse of a laser-generated cavity near a rigid boundary. J. Fluid Mech. 1999, 380:339.
496. Brenner M.P., Hilgenfeldt S., Lohse D. Single-bubble sonoluminescense. Rev. Mod. Physics 2002, 74:425.
497. Khoo B.C., Klaseboer E., Hung K.C. A collapsing bubble-induced micro-pump using the jetting effect. Senors Actuators 2004, 118:152.
498. Lew K.S.F., Klaseboer E., Khoo B.C. A collapsing bubble-induced micropump: an experimental study. Sensors Actuators A 2007, 133:161-172.
499. Dijkink R.J., van der Dennen J.P., Ohl C.D., Prosperetti A The 'acoustic scallop': a bubble-powered actuator. J. Micromech. Microeng. 2006, 16:1653.
500. Leighton T.G., Ramble D.G., Phelps A.D., Morfey C.L., Harris P.P. Acoustic detection of gas bubbles in a pipe. Acustica 1988, 82:801.
501. Krasovitskia B., Kimmel E. Gas bubble pulsation in a semiconfined space subjected to ultrasound. J. Acoust. Soc. Am. 2001, 109:891.
502. Zhong P., Zhou Y., Zhu S. Dynamics of bubble oscillation in constrained media and mechanisms of vessel rupture in SWL. Ultrasound in Med. & Biol. 2001, 27:119134.
503. Cui J., Hamilton M., Wilson P., Zabolotskaya E. Bubble pulsations between parallel plates. J. Acoust. Soc. Am. 2006, 119:2067.
504. Ory E., Yuan H., Prosperetti A., Popinet S., Zaleski S. Growth and collapse of a vapor bubble in a narrow tube. Phys. Fluids 2000, 12:1268.
505. Sassaroli E., Hynynen K. Forced linear oscillations of microbubbles in blood capillaries. J. Acoust. Soc. Am. 2004, 115:3235.
506. Qin S., Ferrara K.W. Acoustic response of compliable microvessels containing ultrasound contrast agents. Phys. Med. Biol. 2006, 51:5065.
507. Qin S., Ferrara K.W. The natural frequency of oscillation of ultrasound contrast agents in microvessels. Ultrasound in Med. & Biol. 2007, 33:1140.
508. Caskey C.F., Stieger S.M., Qin S., Dayton P.A., Ferrara K.W. Direct observations of ultrasound microbubble contrast agent interaction with the microvessel wall. J. Acoust. Soc. Am. 2007, 122:1191.
509. Oguz H.N., Prosperetti A. The natural frequency of oscillation of gas bubbles in tubes. J. Acoust. Soc. Am. 1998, 103:3301.
510. Geng X., Yuan H., Oguz H.N., Prosperetti A. The oscillation of gas bubbles in tubes: Experimental results. J. Acoust. Soc. Am. 1999, 106:674.
511. Prosperetti A. The thermal behavior of oscillating gas bubbles. J. Fluid Mech. 1991, 222:587.
512. Chen X.M., Prosperetti A. Thermal processes in the oscillations of gas bubbles in tubes. J. Acoust. Soc. Am. 1998, 104:1389.
513. Prosperetti A., Crum L.A., Commander K.W. Nonlinear bubble dynamics. J. Acoust. Soc. Am. 1988, 83:502.
514. Jeurissen R., de Jong J., Reinten H., van den Berg M., Wijshoff H., Versluis M., Lohse D. Effect of an entrained air bubble on the acoustics of an ink channel. J. Acoust. Soc. Am. 2008, 123:2496.
515. R. Jeurissen, J. de Jong, H. Borel, M. Versluis, M. van den Berg, H. Wijshoff, H. Reinten, A. Prosperetti, D. Lohse, Sound absorption of bubbles in inkjet-printer microchannels, in: Proc. 6th EFMC, 2006, p. 340.
516. Rensen J., Bosman D., Magnaudet J., Ohl C.D., Prosperetti A., Toegel R., Versluis R, M., Lohse D. Spiraling bubbles: how acoustic and hydrodynamic forces compete. Phys. Rev. Lett. 2001, 86:4819.
517. Leighton T.G., Walton A.J., Pickworth M.J.W. Primary Bjerknes forces. Eur. J. Phys. 1990, 11:47.
518. Crum L.A. Bjerknes Forces on Bubbles Om a Stationary Sound Field 2004, Elsevier Academic Press.
519. Magnaudet J., Legendre D. The viscous drag force on a spherical bubble with a time-dependent radius. Phys. Fluids 1998, 10:550.
520. Magnaudet J., Eames I. The motion of high-Reynolds-number bubbles in inhomogeneous flows. Ann. Rev. Fluid Mech. 2000, 32:659.
521. Kundu P.K., Cohen I.M. Fluid Mechanics 2004, Elsevier Academic Press.
522. Legendre D., Magnaudet J. The lift force on a spherical bubble in a viscous linear shear flow. J. Fluid Mech. 1998, 368:81.
523. Magnaudet J., Legendre D. Some aspects of the lift force on a spherical bubble. Appl. Sci. Res. 1998, 58:441.
524. Toegel R., Luther S., Lohse D. Viscosity destabilizing sonoluminescing bubbles. Phys. Rev. Lett. 2006, 96:114301.
525. Oguz H.N., Prosperetti A. Dynamics of bubble growth and detachment from a needle. J. Fluid Mech. 1993, 257:111.
526. Prosperetti A., Oguz H.N. Physalis: a new method for the numerical simulation of disperse systems; potential flow of spheres. J. Comput. Phys. 2001, 167:196.
527. Takagi S., Oguz H.N., Zhang Z., Prosperetti A. Physalis: a new method of particle simulation part II: two-dimensional Navier-Stokes flow around cylinders. J. Comput. Phys. 2003, 187:371.
528. Bergmann R., Stijnman M., Sandtke M., van der Meer D., Prosperetti A., Lohse D. Giant bubble collapse. Phys. Rev. Lett. 2006, 96:154505.
529. R. Jeurissen, Bubbles in inkjet printheads. Analytical and numerical models, Ph.D. Thesis, University of Twente, 2009.
530. Fyrillas M.M., Szeri A.J. Dissolution or growth of soluble spherical oscillating bubbles. J. Fluid Mech. 1994, 277:381.
531. Michaelis E.E. Hydrodynamic force and heat/mass transfer from particles, bubbles, and drops - The Freeman Scholar Lecture. J. Fluid Eng. 2003, 125:209.
532. Brenner M.P., Lohse D., Dupont T.F. Bubble shape oscillations and the onset of sonoluminescence. Phys. Rev. Lett. 1995, 75:954.
533. Toegel R., Lohse D. Phase diagrams for sonoluminescing bubbles: a comparison between experiment and theory. J. Chem. Phys. 2003, 118:1863.
534. Womersley J.R. Method for the calculation of velocity, rate of flow and viscous drag in arteries when the pressure gradient is known. J. Physiol. 1955, 127:553.
535. Jeurissen R., van der Bos A., Reinten H., van den Berg M., Wijshoff H., de Jong J., Versluis M., Lohse D. Acoustic measurement of bubble size in an inkjet printhead. J. Acoust. Soc. Am. 2009, 126:2184.
536. W. Zapka, M. Crankshaw, W. Voit, J. Brünahl, U. Herrmann, G. Münchow, Increased inkjet printing frequency from offset channel printheads, in: Proc. IS&T's NIP19, 2003, p. 272.