Evaluation of stresses occurring on three different zirconia dental implants: Three-dimensional finite element analysis

International Journal of Oral and Maxillofacial Implants

Volumn 25, Issue 1, 2010, Pages 95-103

  Çağlar, Alper ^a   Bal, Bilge Turhan ^b   Aydin, Cemal ^b   Yilmaz, Handan ^b   Secil Ozkan ^b  

^a BASKENT UNIVERSITY   (Turkey)

^b GAZI UNIVERSITY   (Turkey)

Author keywords

Compressive stress; Dental implants; Finite element stress analysis; Tensile stress; Von Mises stress; Zirconia

Indexed keywords

ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; COMPRESSIVE STRENGTH; COMPUTER SIMULATION; DENTAL CARE; FINITE ELEMENT ANALYSIS; JAW; MAXILLA; MECHANICAL STRESS; METHODOLOGY; PHYSIOLOGY; TENSILE STRENGTH; TOOTH CROWN; TOOTH IMPLANTATION; TOOTH PROSTHESIS;

ALVEOLAR PROCESS; COMPRESSIVE STRENGTH; COMPUTER SIMULATION; CROWNS; DENTAL IMPLANTS; DENTAL MODELS; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; FINITE ELEMENT ANALYSIS; MAXILLA; STRESS, MECHANICAL; TENSILE STRENGTH; ZIRCONIUM;

EID: 77951936997     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (46)

1. Andersson B, Odman P, Lindvall AM, Brånemark PI. Cemented single crowns on osseointegrated implants after 5 years:Results from a prospective study on CeraOne. Int J Prosthodont 1998;11:212-218.
2. Andersson B, Glauser R, Maglione M, Taylor A. Ceramic implant abutments for short span FPDs: A prospective 5 year multicenter study. Int J Prosthodont 2003;16:640-646.
3. Yildirim M, Edelhoff D, Hanisch O, Spiekermann H. Ceramic abutments-A new era in achieving optimal esthetics in implant dentistry. Int J Periodontics Restorative Dent 2000;20:81-91.
4. Glauser R, Sailer I, Wohlwend A, Studer S, Schibli M, Schärer P. Experimental zirconia abutments for implant-supported single- tooth restorations in esthetically demanding regions: 4- year results of a prospective clinical study. Int J Prosthodont 2004;17:285-290.
5. Oliva J, Oliva X, Oliva JD. One-year follow-up of first consecutive 100 zirconia dental ımplants in humans. A comparison of 2 different rough surfaces. Int J Oral Maxillofac Implants 2007; 22:430-435.
6. Caglar A, Aydin C, Ozen J, Yilmaz C, Korkmaz T. Effects of mesiodistal inclination of implants on stress distribution in implant-supported fixed prostheses. Int J Oral Maxillofac Implants 2006;21:36-44.
7. Dubruille JH, Viguier E, Le Naour G, Dubruille MT, Auriol M, Le Charpentier Y. Evaluation of combinations of titanium zirconia, and alumina implants with 2 bone fillers in the dog. Int J Oral Maxillofac Implants 1999:14:271-277.
8. Marx R. Modern ceramic materials for esthetic restorations- Strengthening and fracture toughness [in German]. Dtsch Zahnarztl Z 1993;48:229-236.
9. Piconi C, Burger W, Richter HG, et al. Y-TZP ceramics for artificial joint replacements. Biomaterials 1998;19:1489-1494.
10. Stevens R. Zirconia and Zirconia Xeramics. An Introduction to Zirconia, ed 2. Twickenham, UK: Litho 2000, 1986:1-5.
11. Garvie RC, Hanning RH, Pascoe RT. Ceramics steel? Nature 1975;258:703-704.
12. Covacci V, Bruzzese N, Maccauro G, et al. In vitro evaluation of the mutagenic and carcinogenic power of high purity zirconia ceramic. Biomaterials 1999;20:371-376.
13. Ahmad I. Yttrium-partially stabilized zirconium dioxide posts:An approach to restoring coronally compromised nonvital teeth. Int J Periodontics Restorative Dent 1998;18:454-465.
14. Wohlwend A, Studer S, Schärer P. Das zirkonoxid-abutment- Ein neues vollkeramisches konzept zur ästhetischen verbesserung der suprastructer in der implantologie. Quintessenz Zahntechnik 1996;22;364-381.
15. Heydecke G, Kohal R, Glaser R. Optimal esthetics in singletooth replacement with the re-implant system: A case report. Int J Prosthodont 1999;12:184-189.
16. Akagawa Y, Hosokawa R, Sato Y, Kamayama K. Comparison between freestanding and tooth-connected partially stabilized zirconia implants after two years function in monkeys: A clinical and histologic study. J Prosthet Dent 1998;80:551-558.
17. Ichikawa Y, Akagawa Y, Nikai H, Tsuru H. Tissue compatibility and stability of a new zirconia ceramic in vivo. J Prosthet Dent 1992;68:322-326.
18. Kohal RJ, Hürzeler MB, Mota LF, Klaus G, Caffesse RG, Strub JR. Custom made root analogue titanium implants placed into extraction sockets. An experimental study in monkeys. Clin Oral Implants Res 1997;8:386-392.
19. Sennerby L, Dasmah A, Larsson B, Iverhed M. Bone tissue responses to surface modified zirconia implants: A histomorphometric and removal torque study in the rabbit. Clin Implant Dent Relat Res 2005;7:S13-S20.
20. Kohal RJ, Papavasiliou G, Kamposiora P, Tripodakis A, Strub JR. Three-dimentional computerized stress analysis of commercially pure titanium and yttrium-partially stabilized zirconia implants. Int J Prosthodont 2002;15:189-194.
21. Koolstra JH, van Eijden TM, Weijs WA, Naeije M. A three-dimensional mathematical model of the human masticatory system predicting maximum possible bite forces. J Biomech 1988;21:563-576.
22. Meijer HJ, Starmans FJ, Steen WH, Bosman F. Location of implants in the interforaminal region of the mandible and the consequences for the design of the superstructure. J Oral Rehabil 1994;21:47-56.
23. Ipliķioğlu H, Aķa K. Comparative evaluation of the effect of diameter, length and number of implants supporting three unit fixed partial prostheses on stress distribution in the bone. J Dent 2002;30:41-46.
24. Meijer HJ, Starmans FJ, Steen WH, Bosman F. A three-dimensional finite-element analysis of bone around dental implants in an edentulous human mandible. Arch Oral Biol 1993;38:491-496.
25. Lavelle CL. Biomechanical considerations of prosthodontic therapy: The urgency of research into alveolar bone responses. Int J Oral Maxillofac Implants 1993;8:179-185.
26. Piattelli A, Scarano A, Paolantonio M. Clinical and histologic features of a non-axial load on the osseointegrated of a posterior mandibular implant: Report of a case. Int J Oral Maxillofac Implants 1998;13:273-275.
27. Geng JP, Tan KB, Liu GR. Application of finite element analysis in implant dentistry: A review of the literature. J Prosthet Dent 2001;85:585-598.
28. Ozen J, Caglar A, Beydemir B, Aydin C, Dalkiz M.Three-dimensional finite element stress analysis of different core materials in maxillary implant-supported fixed partial dentures. Quintessence Int 2007;38:e355-e363.
29. Barbier L, Vander Sloten J, Krzesinski G, Schepers E, Van der Perre G. Finite element analysis of non-axial versus axial loading of oral implants in the mandible of the dog. J Oral Rehabil 1998;25:847-858.
30. Teixeira ER, Sato Y, Akagawa Y, Shindoi N. A comparative evaluation of mandibular finite element models with different lengths and elements for implant biomechanics. J Oral Rehabil 1998;25:299-303.
31. Gross MD, Arbel G, Hershkovitz I. Three-dimensional finite element analysis of the facial skeleton on simulated occlusal loading. J Oral Rehabil 2001;28:684-694.
32. Sato Y, Teixeira ER, Tsuga K, Shindoi N. The effectiveness of a new algorithm on a three-dimensional finite element model construction of bone trabeculae in implant biomechanics. J Oral Rehabil 1999;26:640-643.
33. Sato Y, Wadamoto M, Tsuga K, Teixeira ER. The effectiveness of element downsizing on a three-dimensional finite element model of bone trabeculae in implant biomechanics. J Oral Rehabil 1999;26:288-291.
34. Petrie CS, Williams JL. Comparative evaluation of implant designs: Influence of diameter, length, and taper on strains in the alveolar crest. A three dimensional finite-element analysis. Clin Oral Implants Res 2005;16:486-494.
35. Geng JP, Xu DW, Tan KB, Liu GR. Finite element analysis of an osseointegrated stepped screw dental implant. J Oral Implantol 2004;30:223-233.
36. Hassler CR, Rybicki EF, Cummings KD, Clark LC. Quantification of bone stresses during remodeling. J Biomech 1980;13:185-190.
37. Akça K, İ plikçioglu H. Evaluation of the effect of the residual bone angulation on implant-supported fixed prosthesis in mandibular posterior edentulis. Part II: 3-D finite element stress analysis. Implant Dent 2001;10:238-245.
38. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25.
39. Geng JP, Ma QS, Xu W, Tan KB, Liu GR. Finite element analysis of four thread-form configurations in a stepped screw implant. J Oral Rehabil 2004;31:233-239.
40. Valen M. The relationship between endosteal implant design and function: Maximum stress distribution with computerformed three-dimensional flexi-cup blades. J Oral Implantol 1983;11:49-71.
41. Rieger MR, Adams WK, Kinzel GL. Finite element survey of eleven endosseous implants. J Prosthet Dent 1990;63:457-465.
42. Bidez MW, Misch CE. Force transfer in implant dentsitry: Basic concepts and principles. J Oral Implantol 1992;18:264-274.
43. Kong L, Hu K, Li D, et al. Evaluation of the cylinder implant thread height and width: A 3-dimensional finite element analysis. Int J Oral Maxillofac Implants 2008;23:65-74.
44. Rieger MR, Fareed K, Adams WK, Tanquist RA. Bone stress distribution for three endosseous implants. J Prosthet Dent 1989;61:223-228.
45. Patra AK, Depaolo JM, D’Souza KS, DeTolla D, Meenaghan MA. Guidelines for analysis and redesign of dental implants. Implant Dent 1998;7:355-368.
46. Chun HJ, Cheong SY, Han JH, et al. Evaluation of design parameters of osseointegrated dental implants using finite element analysis. J Oral Rehabil 2002;29:565-574.