Evaluation of the cylinder implant thread height and width: A 3-dimensional finite element analysis

International Journal of Oral and Maxillofacial Implants

Volumn 23, Issue 1, 2008, Pages 65-74

  Kong, Liang ^a   Hu, Kaijin ^a   Li, Dehua ^a   Song, Yingliang ^a   Yang, Jin ^b   Wu, Ziyan ^b   Liu, Baolin ^a  

^a FOURTH MILITARY MEDICAL UNIVERSITY   (China)

^b NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

Author keywords

3 dimensional finite element analysis; Dental implant; Optimized thread design; Stress

Indexed keywords

ARTICLE; BIOMECHANICS; BONE REGENERATION; BONE SCREW; COMPUTER SIMULATION; DENTAL CARE; EVALUATION; FINITE ELEMENT ANALYSIS; HUMAN; JAW; MECHANICAL STRESS; METHODOLOGY; PHYSIOLOGY; THREE DIMENSIONAL IMAGING; TOOTH IMPLANTATION; TOOTH PROSTHESIS;

ALVEOLAR PROCESS; BIOMECHANICS; BONE SCREWS; COMPUTER SIMULATION; DENTAL IMPLANTATION, ENDOSSEOUS; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; DENTAL STRESS ANALYSIS; FINITE ELEMENT ANALYSIS; HUMANS; IMAGING, THREE-DIMENSIONAL; OSSEOINTEGRATION; STRESS, MECHANICAL;

EID: 40849083718     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (44)

1. Cehreli M, Duyck J, De Cooman M, Puers R, Naert I. Implant design and interface force transfer. A photoelastic and strain-gauge analysis. Clin Oral Implants Res 2004;15:249-257.
2. Matsushita Y, Kitoh M, Mizuta K, Ikeda H, Suetsugu T. Two-dimensional FEM analysis of hydroxyapatite implants: Diameter effects on stress distribution. J Oral Implantol 1990;16:6-11.
3. Meijer HJA, Kuiper JH, Starmans FJM, Bosman F. Stress distribution around dental implants: Influence of superstructure, length of implants, and height of mandible. J Prosthet Dent 1992;68:96-102.
4. Palmer RM, Smith BJ, Palmer PJ, Floyd PD. A prospective study of Astra single tooth implants. Clin Oral Implants Res 1997;8:173-179.
5. Holmgren EP, Seckinger RJ, Kilgren LM, Mante F. Evaluating parameters of osseointegrated dental implants using finite element analysis - A 2-dimensional comparative study examining the effects of implant diameter, implant shape, and load direction. J Oral Implantol 1998;24:80-88.
6. Nordin T, Jönsson G, Nelvig P, Rasmusson L. The use of a conical fixture design for fixed partial dentures. A preliminary report. Clin Oral Implants Res 1998;9:343-347.
7. Norton MR. Marginal bone levels at single tooth implants with a conical fixture design. The influence of surface macro- and microstructure. Clin Oral Implants Res 1998;9:91-99.
8. Chun HJ, Cheong SY, Han JH, et al. Evaluation of design parameters of osseointegrated dental implants using finite element analysis. J Oral Rehabil 2002;29:565-574.
9. Tada S, Stegaroiu R, Kitamura E, Miyakawa O, Kusakari H. Influence of implant design and bone quality on stress/strain distribution in bone around implants: A 3-dimensional finite element analysis. Int J Oral Maxillofac Implants 2003;18:357-368.
10. Ivanoff CJ, Grondahl K, Sennerby L, Bergstrom C, Lekholm U. Influence of variations in implant diameters: A 3- to 5-year retrospective clinical report. Int J Oral Maxillofac Implants 1999;14:173-180.
11. Brunski JB. Biomechanical considerations in dental implant design. Int J Oral Implantol 1988;5:31-34.
12. Misch CE. Contemporary Implant Dentistry, ed 2. St. Louis: Mosby, 1999.
13. Bumgardner JD, Boring JG, Cooper RC Jr, et al. Preliminary evaluation of a new dental implant design in canine models. Implant Dent 2000;9:252-260.
14. Brånemark P-I, Hansson BO, Adell R, et al. Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period. Scand J Plast Reconstr Surg 1977;16(suppl):1-132.
15. Hansson S, Werke M. The implant thread as a retention element in cortical bone: The effect of thread size and thread profile: A finite element study. J Biomech 2003;36:1247-1258.
16. Barbier L, Schepers E. Adaptive bone remodeling around oral implants under axial and nonaxial loading conditions in the dog mandible. Int J Oral Maxillofac Implants 1997;12:215-223.
17. Iplikcioglu H, Akca K. Comparative evaluation of the effect of diameter, length and number of implants supporting three-unit fixed partial prostheses on stress distribution in the bone. J Dent 2002;30:41-46.
18. Steigenga JT, al-Shammari KF, Nociti FH, Misch CE. Dental implant design and its relationship to long-term implant success. Implant Dent 2003;12:306-315.
19. Geng JP, Ma QS, Xu W, Tan KBC, Liu G. Finite element analysis of four thread-form configurations in a stepped screw implant. J Oral Rehabil 2004;31:233-239.
20. Zienkiewicz OC. The Finite Element Method in Engineering Science, ed 4. New York: McGraw-Hill, 1989.
21. Timoshenko SP, Goodier JN. Theory of Elasticity. Singapore: McGraw-Hill, 1984.
22. Kitamura E, Stegaroiu R, Nomura S, Osamu M. Biomechanical aspects of marginal bone resorption around osseointegrated implants: Considerations based on a three-dimensional finite element analysis. Clin Oral Implants Res 2004;15:401-412.
23. Kitamura E, Stegaroiu R, Nomura S, Miyakawa O. Influence of marginal bone resorption on stress around an implant;209;A 3-dimensional finite element analysis. J Oral Rehabil 2005;32:179-286.
24. Cochran DL. The scientific basis for clinical experiences with Straumann implants including the ITI dental implant system: A consensus report. Clin Oral Implants Res 2000;11:33-58.
25. Hojjatie B, Anusavice KS. Three dimensional finite element analyses of glass ceramic dental crowns. J Biomechanics 1990;23:1157-1166.
26. Matsushita Y, Kitah M, Mizuta K, Ikeda H, Suetsugu T. Two dimensional FEM analysis of hydroxyapatite implants: Diameter, effects on stress distribution. J Oral Implantol 1990;16:6-11.
27. Zhou X, Zhao Z, Zhao M, Fan Y. The boundary design of mandibular model by means of the three-dimensional finite element method. West China J Stomatol 1999;17:1-6.
28. Teixeira ER, Sato Y, Shindoi N. A comparative evaluation of mandibular finite element models with different lengths and elements for implant biomechanics. J Oral Rehabil 1998;25:299-303.
29. Meijer HJA, Starmans FJM, Bosman F, Steen WHA. A comparison of three finite element models of an edentulous mandible provided with implants. J Oral Rehabil 1993;20:147-157.
30. Iplikcioglu H, Akca K. Comparative evaluation of the effect of diameter, length and number of implants supporting three-unit fixed partial prostheses on stress distribution in the bone. J Dent 2002;30:41-46.
31. Patra AK, DePaolo JM, D'Souza KS, DeTolla D, Meenaghan MA. Guidelines for analysis and redesign of dental implants. Implant Dent 1998;7:355-368.
32. Brunski JB. Biomechanical factors affecting the bone-dental implant interface. Clin Mater 1992;10:153-201.
33. Brunski JB. In vivo response to biomechanical loading at the bone/ dental-implant interface. Adv Dent Res 1999;13:99-119.
34. Van Oosterwyck H, Duyck J, Vander Sloten J, et al. The influence of bone mechanical properties and implant fixation upon bone loading around oral implants. Clin Oral Implants Res 1998;9:407-418.
35. Duyck J, Naert I, Rønold HJ, Ellingsen JE, Van Oosterwyck H, Vander Sloten J. The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: An animal experimental study. Clin Oral Implants Res 2001;12:207-218.
36. Gotfredsen K, Berglundh T, Lindhe J. Anchorage of titanium implants with different surface characteristics: An experimental study in rabbits. Clin Implant Dent Relat Res 2000;2:120-128.
37. Chen J, Lu X, Paydar N, Akay HU, Roberts WE. Mechanical simulation of the human mandible with and without an endosseous implant. Med Eng Phys 1994;16:53-61.
38. Hart RT, Hennebel VV, Thongpreda N, van Buskirk WC, Anderson RC. Three-dimensional finite element study of the biomechanics of the mandible. J Biomech 1992;25:261-286.
39. Hoshaw SJ, Brunski JB, Cochran GVB. Mechanical loading of Brånemark implants affects interfacial bone modeling and remodeling. Int J Oral Maxillofac Implants 1994;9:345-360.
40. Strong JT, Misch CE, Bidez MW, Nalluri P. Functional surface area: Thread-form parameter optimization for implant body design. Compend Contin Educ Dent 1998;19:4-9.
41. Cook SD, Klawitter JJ, Weinstein AM. A model for the implant-bone interface characteristics of porous dental implants. J Dent Res 1982;61:1006-1009.
42. Borchers L, Reichart P. Three-dimensional stress distribution around a dental implant at different stages of interface development. J Dent Res 1983;62:155-159.
43. Colling EW. The Physical Metallurgy of Titanium Alloys. Metals Park, OH: American Society for Metals, 1984.
44. Lewinstein I, Banks-Sills L, Eliasi R. Finite element analysis of a new system (IL) for supporting an implant-retained cantilever prosthesis. Int J Oral Maxillofac Implants 1995;10:355-366.