Effect of dual cure composite as dentin substitute on the marginal integrity of class II open-sandwich restorations

Operative Dentistry

Volumn 35, Issue 2, 2010, Pages 165-171

  Koubi, S ^a   Raskin, A ^a   Dejou, J ^a   About, I ^a   Tassery, H ^a   Camps, J ^a   Proust, J P ^a  

^a AIX MARSEILLE UNIVERSITY   (France)

Author keywords

[No Author keywords available]

Indexed keywords

DENTIN BONDING AGENT; FUJI II LC CEMENT; GLASS IONOMER; METHACRYLIC ACID DERIVATIVE; MULTICORE FLOW; RESIN; RESIN CEMENT;

ARTICLE; CHEMISTRY; CLASSIFICATION; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; DENTIN; ENDODONTICS; HARDNESS; HUMAN; MATERIALS TESTING; METHODOLOGY; MOLAR TOOTH; NONPARAMETRIC TEST; TOOTH DISEASE;

COMPOSITE RESINS; DENTAL BONDING, CHEMICALLY-CURED; DENTAL BONDING, LIGHT-CURED; DENTAL LEAKAGE; DENTAL MARGINAL ADAPTATION; DENTAL RESTORATION, PERMANENT; DENTAL STRESS ANALYSIS; DENTIN; DENTIN-BONDING AGENTS; GLASS IONOMER CEMENTS; HARDNESS; HUMANS; MATERIALS TESTING; METHACRYLATES; MOLAR, THIRD; RESIN CEMENTS; RESINS, SYNTHETIC; STATISTICS, NONPARAMETRIC;

EID: 77950818350     PISSN: 03617734     EISSN: None     Source Type: Journal    
DOI: 10.2341/08-104-L     Document Type: Article

References (44)

1. Duquia Rde C, Osinaga PW, Demarco FF, de V Habekoat L & Conceicao EN (2006) Cervical microleakage in MOD restorations: In vitro comparison of indirect and direct composite Operative Dentistry 31(6) 682-687.
2. Alavi AA & Kianimanesh N (2002) Microleakage of direct and indirect composite restorations with three dentin bonding agents Operative Dentistry 27(1) 19-24.
3. Fruits TJ, Knapp JA & Khalotia SS (2006) Microleakage in the proximal walls of direct and indirect posterior resin slot restorations Operative Dentistry 31(6) 719-727.
4. Korkmaz Y, Ozel E & Attar N (2007) Effects of flowable composite lining on microleakage and internal voids in Class II composite restorations The Journal of Adhesive Dentistry 9(2) 189-194.
5. Charten C, Falk V, Marchai PY & Colon P (2007) Influence of Tg, viscosity and chemical structure of monomers on shrinkage stress in light-cured dimethacrylate-based dental resins Dental Materials 23 1447-1459. (Pubitemid 47391020)
6. Shortall AC, Palin WM & Burtscher P (2008) Refractive index mismatch and monomer reactivity influence composite curing depth Journal of Dental Research 87(1) 84-88.
7. Attar N, Turgut MD & Güngör HC (2004) The effect of flowable resin composites as gingival increments on the microleakage of posterior resin composites Operative Dentistry 29(2) 162-167. (Pubitemid 38507285)
8. Rode KM, Kawano Y & Turbino ML (2007) Evaluation of curing light distance on resin composite microhardness and polymerization Operative Dentistry 32(6) 571-578.
9. Uhl A, Sigush BW & Jandt K (2004) Second generation LEDs for the polymerisation of biomaterials Dental Materials 20(1) 80-87.
10. Eiriksson SO, Pereira PN, Swift EJ, Heymann HO & Sigurdsson A (2004) Effects of blood contamination on resinresin bond strength Dental Materials 20(2) 184-190.
11. Hitmi L, Attal JP & Degrange M (1999) Influence of timepoint of salivary contamination on dentin shear bond strength of 3 dentin adhesive systems The Journal of Adhesive Dentistry 1(3) 219-232.
12. Giachetti L, Scaminaci Russo D, Bertini F, Pierleoni F & Nieri M (2007) Effect of operator skill in relation to microleakage of total-etch and self-etch bonding systems Journal of Dentistry 35(4) 289-293.
13. Saiot S, Tosaki S & Hirota K (1999) Characteristics of glassionomer cements. In Advances in Glass Ionomer Cements Davidson CL & Mjör IAp 15-50 Quintessence Publishing Co, Carol Stream, IL, USA.
14. Besnault C & Attal JP (2003) Simulated oral environment and microleakage of Class II resin-based composite and sandwich restorations American Journal of Dentistry 16(3) 186190. (Pubitemid 41310077)
15. Anderson-Wenckert IE, van Dijken JW & Hörsted P (2002) Modified Class II open-sandwich restorations: Evaluation of interfacial adaptation and influence of different restorative techniques European Journal of Oral Sciences 110(3) 270275.
16. Vdkinis V, Hörsted-Bindslev P & Baelum V (2000) Two-year evaluation of Class II resin-modified glass ionomer cement/composite open-sandwich and composite restorations Clinical Oral Investigations 4(3) 133-139.
17. Anderson-Wenckert IE, van Dijken JW & Kieri C (2004) Durability of extensive Class II open-sandwich restorations with a resin-modified glass ionomer cement after 6 years American Journal of Dentistry 17(1) 43-50.
18. Tanoue N, Koishi Y, Atsuta M & Matsumura H (2003) Properties of dual-curable luting composites polymerized with single and dual curing modes Journal of Oral Rehabilitation 30(10) 1015-1021. (Pubitemid 37340241)
19. Truffier-Boutry D, Demoustier-Champagne S, Devaux J, Biebuyck JJ, Mestdagh M, Larbanois P & Leloup G (2006) A physico-chemical explanation of the post-polymerization shrinkage in dental resins Dental Materials 22(5) 405-412.
20. Geng L & Suh BI (2006) The effect of curing modes on polymerization contraction stress of dual cured composite Journal of Biomedical Materials Research Part B, Applied Biomaterials 76(1) 196-202.
21. Li Q, Jepsern H, Albers K & Eberhard J (2006) Flowable materials as an intermediate layer could improve the marginal and internal adaptation of composite restorations in Class V Cavities Dental Materials 22(3) 250-257. (Pubitemid 43199614)
22. Pashley DH, Pashley EL, Carvalho RM & Tay FR (2002) The effects of dentin permeability on restorative materials Dental Clinics of'North America 46(2) 211-245.
23. Mjör IA & Toffenetti F (2000) Secondary caries: A literature review with case reports Quintessence International 31(3) 165-179.
24. Amaral FL, Colucci V, Palma-Dibb RG & Corona SA (2007) Assessment of in vitro methods used to promote adhesive interface degradation: A critical review Journal of Esthetic and Restorative Dentistry 19(6) 340-353.
25. Nalcai A & Ulusoy N (2007) Effects of thermocycling on microleakage of resin composites polymerized with LED curing techniques Quintessence International 38(7) e433-e439.
26. 26. Li H, Burrow MS & Tyas MJ (2002) The effect of thermocycling regimens on the nanoleakage of dentin bonding systems Dental Materials 18(3) 189-196. (Pubitemid 40072270)
27. Campos PE, Sampaio Filho HR & Barceleiro Mde O (2005) Occlusal loading evaluation in the cervical integrity of Class II cavities filled with composite Operative Dentistry 30(6) 727-732.
28. Ferracane JR & Condon JL (1999) In vitro evaluation of the marginal degradation of dental composites under simulated occlusal loading Dental Materials 15(4) 262-267.
29. Minakuchi S, Munoz CA & Jessop N (2005) Effect of flexural load cycling on microleakage of extended root caries restorations Operative Dentistry 30(2) 234-238. (Pubitemid 40521736)
30. Richter EJ (1995) In vivo vertical forces on implants The International Journal of Oral & Maxillofacial Implants 10(1) 99-108.
31. Loguercio AD, Bauer JR, Reis A, Filho LE & Busato AL (2002) Microleakage of a packable composite associated with different materials The Journal of Clinical Dentistry 13(3) 111-115.
32. Hagge MS, Lindemuth JS, Mason JF & Simon JF (2001) Effect of four intermediate layer treatments on microleakage of Class II composite restorations General Dentistry 49(5) 489-495.
33. Beznos C (2001) Microleakage at the cervical margin of composite Class II cavities with different restorative techniques Operative Dentistry 26(1) 60-69.
34. El Hejazi AA & Watts D (1999) Creep and visco-elastic recovery of cured and secondary-cured composites and resin-modified glass-ionomers Dental Materials 15(2) 138-143.
35. Jantarat J, Palamar JE, Lindner C & Messer HH (2002) Time-dependent properties of human root dentin Dental Materials 18(6) 486-493. (Pubitemid 40072251)
36. Combe EC, Shaglouf AMS, Watts DC & Wilson NHF (1999) Mechanical properties of direct core build-up materials Dental Materials 15(3) 158-165. (Pubitemid 129591106)
37. Cattani-Lorente MA, Dupuis V, Payan J, Moya F & Meyer JM (1999) Effect of water on the physical properties of resinmodified glass ionomer cements Dental Materials 15(1) 7178. (Pubitemid 129591104)
38. Wang XY, Yap AUJ, Ngo HC & Chung SM (2007) Environmental degradation of glass-ionomer cements: A depth-sensing microindentation study Journal of Biomedical Materials Research Part B, Applied Biomaterials 82(1) 1-6.
39. Helvatjioglu-Antoniades M, Papadogiannis Y, Lakes RS, Palaghias G & Papadogiannis D (2007) The effect of temperature on viscoelastic properties of glass ionomer cements and compomers Journal of Biomedical Materials Research Part B, Applied Biomaterials 80(2) 460-467. (Pubitemid 46245599)
40. Chutinan S, Piatt JA, Cochran MA & Moore BK (2004) Volumetric dimensional change of six direct core materials Dental Materials 20(4) 345-351.
41. Sidhu SK, Sherriff M & Watson TF (1997) The effects of maturity and dehydratation shrinkage on resin-modified glass-ionomer restorations Journal of Dental Research 76(8) 1495-1501. (Pubitemid 127732702)
42. Moreira da Silva E, dos Santos GO, Guimaraes JG, Barcellos Ade A & Sampaio EM (2007) The influence of C-factor, flexural modulus and viscous flow on gap formation in resin composite restorations Operative Dentistry 32(4) 356-362.
43. Kim YG & Hirano S (1999) Setting shrinkage and hygroscopic expansion of resin-modified glass-ionomer in experimental cylindrical cavities Dental Materials 18(1) 63-75.
44. Feilzer AJ, Kakaboura AI, de Gee AJ & Davidson CL (1995) The influence of water sorption on the development of setting shrinkage in traditional and resin-modified cements Dental Materials 11(3) 186-190.