Analysis of single-phase 50-kW 16.7-Hz PI-controlled four-quadrant line-side converter under different grid characteristics

IEEE Transactions on Industrial Electronics

Volumn 57, Issue 2, 2010, Pages 523-531

  Heising, Carsten ^a   Bartelt, Roman ^a   Oettmeier, Martin ^a   Staudt, Volker ^a   Steimel, Andreas ^a  

^a RUHR UNIVERSITY BOCHUM   (Germany)

Author keywords

AC AC power conversion; Rail transportation propulsion; Traction motor drives

Indexed keywords

AC-AC POWER CONVERSION; CONTROL SCHEMES; DC EXCITATION; FOUR-QUADRANT; GRID INTERACTION; INDUCTION GENERATOR; INDUCTION MACHINES; LINE VOLTAGE; MEASUREMENT RESULTS; PROPORTIONAL-INTEGRAL CONTROL; PWM INVERTER; RAIL TRANSPORTATION; RAIL TRANSPORTATION PROPULSION; RAILWAY TRACTION; SWITCHED RESISTORS; TEST BENCHES; TRACTION MOTOR DRIVES; TRANSIENT OPERATION;

ASYNCHRONOUS GENERATORS; COMPUTER HARDWARE; COMPUTER SIMULATION; COUNTING CIRCUITS; ELECTRIC DRIVES; MOTOR TRANSPORTATION; MOTORS; PROPULSION; PULSE MODULATION; PULSE WIDTH MODULATION; RAILROADS; RAILS; REAL TIME CONTROL; TRACTION (FRICTION); TRACTION MOTORS;

SYNCHRONOUS MOTORS;

EID: 75449099749     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2032436     Document Type: Conference Paper

References (29)

1. C. Heising, M. Oettmeier, M. Gorski, V. Staudt, and A. Steimel, "Implications of resonant circuit adjustment errors to the DC-link voltage in single-phase 16.7-Hz-railway applications," in Proc. 6th Int. Workshop CPE, Badajoz, Spain, 2009.
2. M. Depenbrock, "Einphasen-Stromrichter mit sinusförmigem Netzstrom und gut geglätteten Gleichgrößen (Single-phase converter with sinusoidal line current and well-smoothed DC quantities)," ETZ, vol.94, no.8, pp. 466-471, 1973.
3. C. Heising, R. Bartelt, V. Staudt, and A. Steimel, "Single-phase 50-kW 16.7-Hz four-quadrant line-side converter for railway traction applications," in Proc. 13th Int. Power Electron. Motion Conf., Poznan, Poland, 2008, pp. 521-527.
4. M. Meyer and J. Schoening, "Netzstabilität in großen Bahnnetzen (Line stability in extended railway supply grids)," Eisenbahn-Revue, vol.7/8, pp. 312-317, 1999.
5. A. Steimel, Electric Traction-Motive Power and Energy Supply. München, Germany: Oldenbourg Industrieverlag, 2008.
6. G. Iwanski and W. Koczara, "Sensorless direct voltage control of the stand-alone slip-ring induction generator," IEEE Trans. Ind. Electron., vol.54, no.2, pp. 1237-1239, Apr. 2007. (Pubitemid 46591045)
7. C. Niermann, "New rectifier circuits with low mains pollution and additional low cost inverter for energy recovery," in Proc. 3rd Eur. Conf. Power Electron. Appl. EPE, 1989, vol.3, pp. 1131-1136.
8. C. Heising, M. Gorski, V. Staudt, and A. Steimel, "Single-phase 50-kW, 16.7-Hz railway-grid representation featuring variable grid parameters," in Proc. 39th IEEE Power Electron. Spec. Conf., Rhodes, Greece, 2008, pp. 920-924.
9. M. Oettmeier, R. Bartelt, C. Heising, V. Staudt, and A. Steimel, "LQ optimized multivariable control for a single-phase 50-kW, 16.7-Hz railway traction line-side converter," in Proc. 13th Eur. Conf. Power Electron. Appl. EPE, Barcelona, Spain, 2009.
10. M. Oettmeier, C. Heising, V. Staudt, and A. Steimel, "Dead-beat control for a single-phase 50-kW, 16.7-Hz railway-grid representation inverter featuring variable grid parameters," in Proc. 2nd Int. Conf. Power Eng., Lisbon, Portugal, 2009.
11. M. Gorski, C. Heising, V. Staudt, and A. Steimel, "Single-phase 50-kW, 16.7-Hz railway-grid lab representation using a DC-excited slipring induction generator," in Proc. 6th Int. Conf.Workshop CPE, Badajoz, Spain, 2009.
12. M. Carpita, M. Marchesoni, M. Pellerin, and D. Moser, "Multilevel converter for traction applications: Small-scale prototype tests results," IEEE Trans. Ind. Electron., vol.55, no.5, pp. 2203-2212, May 2008.
13. E. Clavel, J. Roudet, T. Chevalier, and D. M. Postariu, "Modeling of connections taking into account return plane: Application to EMI modeling for railway," IEEE Trans. Ind. Electron., vol.56, no.3, pp. 678-684, Mar. 2009.
14. A. Steimel, "Direct self-control and synchronous pulse techniques for high-power traction inverters in comparison," IEEE Trans. Ind. Electron., vol.51, no.4, pp. 810-820, Aug. 2004.
15. W. H. Press, S. A. Teukolsky, W. T. Vetterling, and B. P. Flannery, Numerical Recipes in C. Cambridge, U.K.: Cambridge Univ. Press, 1988.
16. V. Staudt, C. Heising, and A. Steimel, "Advanced simulation concept for power train of Loco and its verification," in Proc. ICPE Conf., Daegu, South Korea, 2007, pp. 866-870.
17. R. Bartelt, M. Oettmeier, C. Heising, V. Staudt, and A. Steimel, "Advanced simulation concept for interaction of railway grid representation and model power train of AC locomotive," in Proc. 2nd Int. Conf. POWERENG, Lisbon, Portugal, 2009.
18. R. Schmidt-Obermöller, M. Kail, V. Staudt, and A. Steimel, "Improved 200-kW double three-level high-power active front end with a new PC-based control hardware," in Proc. 10th OPTIM Conf., Brasov, Romania, 2006.
19. C. Foerth, "Traktionsantrieb Ohne Drehzahlgeber Mit Minimiertem Messaufwand (Traction drive without speed sensor with minimal measurement expense)," Ph.D. dissertation, Ruhr-Universität, Bochum, Germany, 2002.
20. R. Bartelt, C. Heising, V. Staudt, and A. Steimel, "PLL and DFT feedforward control for railway single-phase line-converter synchronisation, " in Proc. 6th Int. Conf.Workshop CPE, Badajoz, Spain, 2009, pp. 217-223.
21. E. Ramezani, "Ein Beitrag Zum Entwurf von Steuerverfahren Für Netzrückwirkungsminimale Stromrichter (A contribution to the design of control methods for line-friendly converters)," Ph.D. dissertation, TU Berlin, Berlin, Germany, 1980.
22. T. Xiaoping, L.-A. Dessaint, R. Champagne, and K. Al-Haddad, "Transient modeling of squirrel-cage induction machine considering air-gap flux saturation harmonics," IEEE Trans. Ind. Electron., vol.55, no.7, pp. 2798-2809, Jul. 2008.
23. P. Correa, M. Pacas, and J. Rodriguez, "Predictive torque control for inverter-fed induction machines," IEEE Trans. Ind. Electron., vol.54, no.2, pp. 1073-1079, Apr. 2007.
24. A. Steimel, "Control of the induction machine in traction," Elektrische Bahnen, vol.96, no.12, pp. 361-369, 1998.
25. M. Jänicke and F. Hoffmann, "Fast torque control of an IGBT inverterfed three-phase A.C. drive in the whole speed range-Experimental results," in Proc. 6th Eur. Conf. Power Electron. Appl. EPE, 1995, vol.3, pp. 399-404.
26. M. Depenbrock, C. Foerth, F. Hoffmann, S. Koch, A. Steimel, and M. Weidauer, "Speed-sensorless stator-flux-oriented control of induction motor drives in traction," Communications-Scientific Letters of the University of Zilina, pp. 68-752001. 2-3.
27. M. Spichartz, C. Heising, V. Staudt, and A. Steimel, "Approximation of transient torque response of a traction drive controlled by indirect statorquantities control," in Proc. 6th Int. Conf.Workshop CPE, Badajoz, Spain, 2009, pp. 240-247.
28. C. Heising, M. Oettmeier, R. Bartelt, V. Staudt, and A. Steimel, "Multivariable pole-placement control design for a single-phase 50-kW, 16.7-Hz railway traction line-side converter," in Proc. 2nd Int. Conf. Power Eng., Lisbon, Portugal, 2009.
29. J. Guzinski, M. Diguet, Z. Krzeminski, A. Lewicki, and H. Abu-Rub, "Application of speed and load torque observers in high-speed train drive for diagnostic purposes," IEEE Trans. Ind. Electron., vol.56, no.1, pp. 248-256, Jan. 2009.