Reinforcement of resin based cement with titania nanotubes

Dental Materials

Volumn 26, Issue 2, 2010, Pages 169-178

  Khaled, S M Z ^a   Miron, Richard J ^b   Hamilton, Douglas W ^b   Charpentier, Paul A ^a   Rizkalla, Amin S ^a,b  

^a UNIVERSITY OF WESTERN ONTARIO   (Canada)

^b WESTERN UNIVERSITY   (Canada)

Author keywords

Acrylic cement; Flowable dental composite; In vitro biocompatibility; Mechanical properties; Rheology; Titania nanotubes

Indexed keywords

BODY CONDITION; CEMENT MATRIX; CEMENT PROPERTIES; COMPLEX VISCOSITY; DENTAL RESINS; FILLER-MATRIX; FLEXURAL MODULUS; FLEXURAL STRENGTH; FLOWABLE COMPOSITE; FLOWABLE DENTAL COMPOSITE; FRACTURE RESISTANCE; FUNCTIONAL MONOMER; FUNCTIONALIZED; IN-VITRO; LONG TERM; MECHANICAL STRESS; METHACRYLIC ACIDS; NANOSTRUCTURED TITANIA; POLYMERIZATION TEMPERATURE; REINFORCING PHASE; RESIN CEMENT; SETTING TIME; TIO; TITANIA NANOTUBES;

BENDING STRENGTH; BIOCOMPATIBILITY; CEMENTS; COMPLEXATION; DENTAL COMPOSITES; ELASTICITY; FILLERS; FRACTURE; FRACTURE TOUGHNESS; MECHANICAL PROPERTIES; NANOTUBES; ORGANIC POLYMERS; PHASE INTERFACES; PLASTICITY; REINFORCEMENT; RESINS; RHEOLOGY; STRESSES; TITANIUM DIOXIDE; TUBES (COMPONENTS); VISCOSITY;

DENTAL CEMENT;

BIOMATERIAL; NANOTUBE; RESIN; RESIN CEMENT; TITANIUM; TITANIUM DIOXIDE;

ARTICLE; CHEMISTRY; DENTAL CARE; MATERIALS TESTING; TRANSITION TEMPERATURE;

BIOCOMPATIBLE MATERIALS; COMPOSITE RESINS; DENTAL STRESS ANALYSIS; MATERIALS TESTING; NANOTUBES; RESIN CEMENTS; TITANIUM; TRANSITION TEMPERATURE;

EID: 75049083745     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.09.011     Document Type: Article

References (45)

1. Lewis G. Properties of acrylic bone cement: state of the art review. J Biomed Mater Res B: Appl Biomater 38 (1997) 155-182
2. Lewis G., Catharina S.J., Hooy-Corstjens V., Bhattaram A., and Koole L.H. Influence of the radiopacifier in an acrylic bone cement on its mechanical, thermal, and physical properties: barium sulfate-containing cement versus iodine-containing cement. J Biomed Mater Res B: Appl Biomater 73B (2005) 77-87
3. Zhang F., Xia Y., Xu L., and Gu N. Surface modification and microstructure of single-walled carbon nanotubes for dental resin-based composites. J Biomed Mater Res B: Appl Biomater 86 (2008) 90-97
4. Lasa V. Poly (methylmethacrylate) bone cement: chemical composition and chemistry. In: Sanjukta D. (Ed). Orthopaedic bone cements (2008), CRC, Boca Raton 183-200
5. Marrs B., Andrews R., Rantell T., and Pienkowski D. Augmentation of acrylic bone cement with multiwall carbon nanotubes. J Biomed Mater Res 77A (2006) 269-276
6. Dunne N. Mechanical properties of bone cements. In: Sanjukta D. (Ed). Orthopaedic bone cements (2008), CRC, Boca Raton 240-255
7. Burns A.W.R., and Bourne R.B. Economics of revision total hip arthroplasty. Curr Orthop 20 (2006) 203-207
8. Kotha S., Li C., Schmid S., and Mason J. Fracture toughness of steel-fiber-reinforced bone cement. J Biomed Mater Res A 70 (2004) 514-521
9. Bowman A., and Manley T. The elimination of breakages in upper dentures by reinforcement with carbon fibre. Br Dent J 156 (1984) 87-89
10. Stipho H. Effect of glass fiber reinforcement on some mechanical properties of autopolymerizing polymethyl methacrylate. J Prosthet Dent 79 (1998) 580-584
11. Ruddell D.E., Maloney M.M., and Thompson J.Y. Effect of novel filler particles on the mechanical and wear properties of dental composites. Dent Mater 18 (2002) 72-80
12. Krause W.R., Park S.H., and Straup R.A. Mechanical properties of Bis-GMA resin short glass fiber composites. J Biomed Mater Res 23 (1989) 1195-1211
13. Topoleski L., Ducheyne P., and Cuckler J. The fracture toughness of titanium-fiber-reinforced bone cement. J Biomed Mater Res 26 (1992) 1599-1617
14. Xu H.K., Quinn J.B., Smith D.T., Giuseppetti A.A., and Eichmiller F.C. Effects of different whiskers on the reinforcement of dental resin composites. Dent Mater 19 (2003) 359-367
15. Moszner N., and Salz U. New development of polymeric dental composites. Prog Polym Sci 26 (2001) 535-576
16. Service F. Nanotechnology grows up. Science 304 (2004) 1732-1734
17. Hill J., Orr J., and Dunne N. In vitro study investigating the mechanical properties of acrylic bone cement containing calcium carbonate nanoparticles. J Mater Sci Mater Med 19 (2008) 3327-3333
18. 2-PMMA nanocomposite: using methacrylic acid as a coupling agent. Langmuir 23 (2007) 3988-3995
19. Goto K., Tamura J., Shinzato S., Fujibayashi S., Hashimoto M., Kawashita M., et al. Bioactive bone cements containing nano-sized titania particles for use as bone substitutes. Biomaterials 26 (2005) 6496-6505
20. Lam C.W., James J.T., McCluskey R., and Hunter R.L. Pulmonary toxicity of single-wall carbon nanotubes in mice 7 and 90 days after intratracheal instillation. Toxicol Sci 77 (2004) 126-134
21. Kasuga T., Hiramatsu M., Hoson A., Sekino T., and Niihara K. Titania nanotubes prepared by chemical processing. Adv Mater 11 (1999) 1307-1311
22. Kim G.-S., Ansari S.G., Seo H.-K., Kim Y.-S., and Shin H.-S. Effect of annealing temperature on structural and bonded states of titanate nanotube films. J Appl Phys 101 (2007) 024314-024320
23. 2 thin films prepared by liquid phase deposition. J Phys Chem B 107 (2003) 13871-13879
24. Pascual B., Vtiquez B., Gurruchaga M., Goti I., Ginebra M.P., Gil F.J., et al. New aspects of the effect of size and size distribution on the setting parameters and mechanical properties of acrylic bone cements. Biomaterials 17 (1996) 509-516
25. ISO. ISO 5833 Implants for surgery-acrylic resin cements (2002), International Testing Organization, Switzerland
26. Amirouche A., Mouzali M., and Watts D.C. Radiopacity evaluation of Bis-GMA/TEGDMA/opaque mineral filler dental composites. J Appl Polym Sci 104 (2007) 1632-1639
27. Ruse N.D., Troczynski T., MacEntee M.I., and Feduik D. Novel fracture toughness test using a notchless triangular prism (NTP) specimen. J Biomed Mater Res 31 (1996) 457-463
28. ASTM. Specification B771-87 (1997). Standard test method for short rod fracture toughness of cemented carbides. 2000 Annual Book of ASTM Standards (2000), American Society for Testing and Materials, West Conshohocken, Pennsylvania
29. Lewis G. Effect of lithotriptor treatment on the fracture toughness of acrylic bone cement. Biomaterials 13 (1991) 225-230
30. Bellows C., and Aubin J. Determination of numbers of osteoprogenitors present in isolated fetal rat calvaria cells in vitro. Dev Biol 133 (1989) 8-13
31. 2 rutile (1 1 0) surface. J Phys Chem B 108 (2004) 5004-5017
32. 2 nanostructured materials: synthesis, properties, and applications. Adv Mater 18 (2006) 2807-2824
33. 2. J Mol Catal A: Chem 217 (2004) 203-210
34. Haas S., Brauer G., and Dickson G. A characterization of polymethylmethacrylate bone cement. J Bone Joint Surg 57 (1975) 380-391
35. Meyer P.R., Lautenschlager E.P., and Moore B.K. On the setting properties of acrylic bone cement. J Bone Joint Surg 55 (1973) 149-156
36. Hernandez L., Gurruchaga M., and Goni I. Influence of powder particle size distribution on complex viscosity and other properties of acrylic bone cement for vertebroplasty and kyphoplasty. J Biomed Mater Res B: Appl Biomater 77B (2006) 98-103
37. Hahn P., Attin T., Grofke M., and Hellwig E. Influence of resin cement viscosity on microleakage of ceramic inlays. Dent Mater 17 (2001) 191-196
38. Nicholas M.K.D., Waters M.G.J., Holford K.M., and Adusei G. Analysis of rheological properties of bone cements. J Mater Sci Mater Med 18 (2007) 1407-1412
39. Lewis G., and Carroll M. Rheological properties of acrylic bone cement during curing and the role of the size of the powder particles. J Biomed Mater Res B: Appl Biomater 63 (2002) 191-199
40. Michler G.H. Micromechanical mechanisms of toughness enhancement in nanostructured amorphous and semicrystalline polymers. In: Michler G.H., and Calleja F.J. (Eds). Mechanical properties of polymers based on nanostructure and morphology (2005), Taylor & Francis, Boca Raton 391-395
41. Kurtz S.M., Villarraga M.L., Zhao K., and Edidin A.A. Static and fatigue mechanical behavior of bone cement with elevated barium sulfate content for treatment of vertebral compression fractures. Biomaterials 26 (2005) 3699-3712
42. Segerström S., and Ruyter I.E. Effect of thermal cycling on flexural properties of carbon-graphite fiber-reinforced polymers. Dent Mater 25 (2009) 845-851
43. San Roman J., Vazquez Lasa B., Aguilar M.R., and Boesel L.F. Modifications of bone cements. In: Sanjukta D. (Ed). Orthopaedic bone cements (2008), CRC, Boca Raton 332-349
44. Attar N., Tam L.E., and McComb D. Flow, strength, stiffness and radiopacity of flowable resin composites. J Can Dent Assoc 69 (2003) 516-521
45. Bonilla E.D., Yashar M., and Caputo A.A. Fracture toughness of nine flowable resin composites. J Prosthet Dent 89 (2003) 261-267