Effect of thermal cycling on flexural properties of carbon-graphite fiber-reinforced polymers

Dental Materials

Volumn 25, Issue 7, 2009, Pages 845-851

  Segerström, Susanna ^a,b   Ruyter, I Eystein ^a  

^a Nordisk Institutt for Odontologiske Materialer   (Norway)

^b KAROLINSKA INSTITUTE   (Sweden)

Author keywords

Adhesion; Fiber reinforced composite; Implant supported prostheses; PMMA nanoparticles; SEM; Three point bend test

Indexed keywords

FIBER-REINFORCED COMPOSITE; IMPLANT-SUPPORTED PROSTHESES; PMMA NANOPARTICLES; SEM; THREE-POINT BEND TEST;

ACRYLIC MONOMERS; ADHESION; BENDING STRENGTH; CARBON FIBERS; ELECTRON EMISSION; ESTERS; FIBER REINFORCED PLASTICS; GRAPHITE; GRAPHITE FIBERS; MECHANICAL PROPERTIES; NANOPARTICLES; PHOTORESISTS; POLYMERS; PROSTHETICS; REFRACTORY MATERIALS; RESINS; SCANNING ELECTRON MICROSCOPY; STRENGTHENING (METAL); THERMAL CYCLING;

FIBERS;

ACRYLIC COMPOUNDS; ADHESION; BEND STRENGTH; CARBON FIBERS; COMPOSITES; ESTERS; FIBERS; MECHANICAL PROPERTIES; MONOMERS; POLYMERS; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SYNTHETIC POLYMERS;

1,4 BUTANEDIOL DIMETHACRYLATE; 1,4-BUTANEDIOL DIMETHACRYLATE; BIOMEDICAL AND DENTAL MATERIALS; CARBON; CARBON FIBER; DIETHYLENE GLYCOL DIMETHACRYLATE POLYMER; ETHYLENE GLYCOL DERIVATIVE; GRAPHITE; METHACRYLIC ACID DERIVATIVE; METHACRYLIC ACID METHYL ESTER; POLY(METHYL METHACRYLATE); POLYMER; POLYMETHACRYLIC ACID DERIVATIVE; WATER;

ADHESION; ARTICLE; CHEMISTRY; DENTAL BONDING; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; PLIABILITY; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TEMPERATURE; TIME; YOUNG MODULUS;

ADHESIVENESS; CARBON; DENTAL BONDING; DENTAL MATERIALS; ELASTIC MODULUS; ETHYLENE GLYCOLS; GRAPHITE; HUMANS; MATERIALS TESTING; METHACRYLATES; METHYLMETHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; PLIABILITY; POLYMERS; POLYMETHACRYLIC ACIDS; POLYMETHYL METHACRYLATE; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS; WATER;

EID: 67349206923     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2008.12.007     Document Type: Article

References (36)

1. Palmer D.S., Barco M.T., and Billy E.J. Temperature extremes produced orally by hot and cold liquids. J Prosthet Dent 67 (1992) 325-327
2. Stinchcomb W.W., Reifsnider K.L., Marcus L.A., and Williams R.S. Effects of frequency on the mechanical response of two composite materials to fatigue loads. Fatigue of composite materials vol. 569 (1975), ASTM-STP 115-129
3. Ruyter I.E., Ekstrand K., and Björk N. Development of carbon/graphite fiber-reinforced poly(methyl methacrylate) suitable for implant-fixed dental bridges. Dent Mater 2 (1986) 6-9
4. Ekstrand K., Ruyter I.E., and Wellendorf H. Carbon/graphite fiber-reinforced poly(methyl methacrylate): properties under dry and wet conditions. J Biomed Mater Res 21 (1987) 1065-1080
5. Vallittu P.K., Ruyter I.E., and Ekstrand K. Effect of water storage on the flexural properties of E-glass and silica fiber acrylic resin composite. Int J Prosthodont 11 (1998) 340-350
6. Behr M., Rosentritt M., Lang R., and Handel G. Flexural properties of fiber reinforced composite using a vacuum/pressure or a manual adaptation manufacturing process. J Dent 28 (2000) 509-514
7. Miettinen V.M., Narva K.K., and Vallittu P.K. Water sorption, solubility and effect of post-curing of glass fibre reinforced polymers. Biomaterials 20 (1999) 1187-1194
8. Beech D.R., and Brown D. The role of the filler-matrix interface in composite restorative materials based on poly(methyl methacrylate). Br Dent J 133 (1972) 297-300
9. Segerström S., and Ruyter I.E. Mechanical and physical properties of carbon-graphite fiber-reinforced polymers intended for implant suprastructures. Dent Mater 23 (2007) 1150-1156
10. Bouillaguet S., Schütt A., Alander P., Schwaller P., Buerki G., Michler J., et al. Hydrothermal and mechanical stresses degrade fiber-matrix interfacial bond strength in dental fiber-reinforced composites. J Biomed Mater Res B Appl Biomater 76 (2006) 98-105
11. Behr M., Rosentritt M., Lang R., Chazot C., and Handel G. Glass-fibre-reinforced-composite fixed partial dentures on dental implants. J Oral Rehabil 28 (2001) 895-902
12. Björk N., Ekstrand K., and Ruyter I.E. Implant-fixed, dental bridges from carbon/graphite fibre reinforced poly(methyl methacrylate). Biomaterials 7 (1986) 73-75
13. Bergendal T., Ekstrand K., and Karlsson U. Evaluation of implant-supported carbon/graphite fiber-reinforced poly(methyl methacrylate) prostheses: a longitudinal multicenter study. Clin Oral Impl Res 6 (1995) 246-253
14. Segerström S., Meriç G., Knarvang T., and Ruyter I.E. Evaluation of two matrix materials intended for fiber reinforced polymers. Eur J Oral Sci 113 (2005) 422-428
15. Vallittu P.K. A review of fiber-reinforced denture base resins. J Prosthodont 5 (1996) 270-276
16. Kanayama H., Kanie T., and Inoue K. Dynamic viscoelastic properties of photo-activated composite resins containing short glass fibres. J Oral Rehabil 27 (2000) 1034-1041
17. Delmonte J. Technology of carbon and graphite fiber composites (1981), Van Nostrand Reinhold Company, New York p. 198-245, 233
18. Torbjörner A., Karlsson S., Syverud M., and Hensten-Pettersen A. Carbon fiber reinforced root canal posts: mechanical and cytotoxic properties. Eur J Oral Sci 104 (1996) 605-611
19. Drummond J.L., and Bapna M.S. Static and cyclic loading of fiber-reinforced dental resin. Dent Mater 19 (2003) 226-231
20. Lassila L.V.J., Tanner J., Le Bell A.-M., Narva K., and Vallittu P.K. Flexural properties of fiber reinforced root canal posts. Dent Mater 20 (2004) 29-36
21. Lehmann F., Eickemeyer G., and Rammelsberg P. Fracture resistance of metal-free composite crowns-effects of fiber reinforcement, thermal cycling and cementation technique. J Prosthet Dent 92 (2004) 258-264
22. ISO 6344-1. Coated abrasives-grain size analysis (1998), International Organization for Standardization, Geneva p. 1-6
23. 2-PMMA nanocomposite; using methacrylic acid as a coupling agent. Langmuir 23 (2007) 3988-3995
24. Minford J.D. Adhesives. In: Kinloch A.J. (Ed). Durability of structural adhesives (1983), Applied Science Publishers Ltd., New York 135-137
25. Lee H., and Orlowsky J.A. Adhesive dental composite restoratives-a monograph on their theory and clinical applications (1974), Lee Pharmaceuticals, South El Monte, CA p. 4-5
26. Wolf K., Fornes R.E., Memory J.D., and Gilbert R.D. A review of interfacial phenomena in graphite fiber composites. In: Thrower P.A. (Ed). Chemistry and physics of carbon vol. 18 (1982), Marcel Dekker Inc., New York and Basel 94-96
27. Meric G., and Ruyter I.E. Effect of thermal cycling on composites reinforced with two differently sized silica-glass fibers. Dent Mater 23 (2007) 1157-1163
28. Agarwal B.D., Broutman L.J., and Chandrashekhara K. Analysis and performance of fiber composites. 3rd ed. (2006), John Wiley and Sons, New Jersey
29. Schreiber C.K. Polymethylmethacrylate reinforced with carbon fibres. Br Dent J 130 (1971) 29-30
30. Knoell A., Maxwell H., and Bechtol C. Graphite fiber reinforced bone cement: an experimental feasibility investigation. Ann Biomed Eng 3 (1975) 225-229
31. Yazdanie N., and Mahood M. Carbon fiber acrylic resin composite: an investigation of transverse strength. J Prosthet Dent 54 (1985) 543-547
32. Vallittu P.K., and Lassila V.P. Reinforcement of acrylic resin denture base material with metal or fibre strengtheners. J Oral Rehabil 19 (1992) 225-230
33. Murphy J. Reinforced plastics handbook. 2nd ed. (1998), Elsevier Science Ltd., Oxford p. 63-106
34. Vallittu P.K. Effect of 180-week water storage on the flexural properties of E-glass and silica fiber acrylic resin composite. Int J Prosthodont 13 (2000) 334-339
35. Vallittu P.K. Effect of 10 years of in vitro aging on the flexural properties of fiber-reinforced resin composites. Int J Prosthodont 20 (2007) 43-45
36. Kinloch A.J. Adhesives. In: Kinloch A.J. (Ed). Durability of structural adhesives (1983), Applied Science Publishers Ltd., New York p. 12-7.