Microdroplet generation in gaseous and liquid environments

Microsystem Technologies

Volumn 16, Issue 3, 2010, Pages 333-356

  Ben Tzvi, Pinhas ^a   Rone, Will ^a  

^a The George Washington University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DROPLET GENERATION; GAS GENERATION; KEY FACTORS; LAB-ON-A-CHIP; LIQUID DROPLETS; LIQUID ENVIRONMENT; MICRO DROPLETS; MICRO-SCALES; MONODISPERSE; SURFACE-BASED;

BIOLOGY; DROP FORMATION;

LIQUIDS;

EID: 73349141683     PISSN: 09467076     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00542-009-0962-7     Document Type: Review

References (115)

1. Aderogba S, Meacham JM, Degertekin FL, Fedorov AG, Fernandez F (2005) Nanoelectrospray ion generation for high-throughput mass spectrometry using a micromachined ultrasonic ejector array. Appl Phys Lett 86:203110-1-3
2. A Amirzadeh Goghari S Chandra 2008 Producing droplets smaller than the nozzle diameter by using a pneumatic drop-on-demand droplet generator Exp Fluids 44 105 114 10.1007/s00348-007-0378-z (Pubitemid 350231502)
3. SL Anna N Bontoux HA Stone 2003 Formation of dispersions using "flow focusing" in microchannels Appl Phys Lett 82 364 366 10.1063/1.1537519
4. SS Baek B Choi Y Oh 2004 Design of a high-density thermal inkjet using heat transfer from CVD diamond J Micromech Microeng 14 750 760 10.1088/0960-1317/14/5/014
5. P Ben-Tzvi R Ben Mrad AA Goldenberg 2007 A conceptual design and FE analysis of a piezoceramic actuated dispensing system for microdrops generation in microarray applications Mechatron 17 1 13 10.1016/j.mechatronics.2006.08.001 (Pubitemid 46027560)
6. WT Berggren MS Westphall LM Smith 2002 Single-pulse nanoelectrospray ionization Anal Chem 74 3443 3448 10.1021/ac010975h (Pubitemid 34764951)
7. J Bergkvist T Lilliehorn J Nilsson S Johansson T Laurell 2005 Miniaturized flowthrough microdispenser with piezoceramic tripod actuation J Microelectromech Syst 14 134 140 10.1109/JMEMS.2004.839000 (Pubitemid 40274562)
8. DB Bogy FE Talke 1984 Experimental and theoretical study of wave propagation phenomena in drop-on-demand ink jet devices IBM J Res Dev 28 314 321
9. A Bransky N Korin M Khoury S Levenberg 2009 A microfluidic droplet generator based on a piezoelectric actuator Lab Chip 9 516 520 10.1039/b814810d
10. CA Bruce 1976 Dependence of ink jet dynamics on fluid characteristics IBM J Res Dev 20 258 270
11. J Brünahl AM Grishin 2002 Piezoelectric shear mode drop-on-demand inkjet actuator Sens Actuators A Phys 101 371 382 10.1016/S0924-4247(02)00212-1
12. WL Buehner JD Hill TH Williams JW Woods 1977 Application of ink-jet technology to a word processing output printer IBM J Res Dev 21 2 9
13. A Cabal DS Ross JA Lebens DP Trauernicht 2005 Thermal actuator with optimized heater for liquid drop ejectors Sens Actuators A Phys 123-124 531 539
14. Castrejón-Pita JR, Martin GD, Hoath SD, Hutchings IM (2008) A simple large-scale droplet generator for studies of inkjet printing. Rev Sci Instrum 79:075108-1-8
15. S Chang D Attinger FP Chiang Y Zhao RC Patel 2004 SIEM measurement of ultimate tensile strength and tensile modulus of jetted, UV-cured epoxy resin microsamples Rapid Prototyp J 10 193 199 10.1108/13552540410539012
16. TN Chang S Parthasarathy T Wang K Gandhi P Soteropoulos 2006 Automated liquid dispensing pin for DNA microarray applications IEEE Trans Autom Sci Eng 3 187 191 10.1109/TASE.2006.871481
17. AU Chen OA Basaran 2002 A new method for significantly reducing drop radius without reducing nozzle radius in drop-on-demand drop production Phys Fluids 14 L1 L4 10.1063/1.1427441 (Pubitemid 34057259)
18. P Cooley D Wallace B Antohe 2001 Applications of ink-jet printing technology to bioMEMS and microfluidic systems Proc SPIE Conf Microfluid BioMEMS 4560 177 188
19. A Dadvand BC Khoo MT Shervani-Tabar 2009 A collapsing bubble-induced microinjector: an experimental study Exp Fluids 46 419 434 10.1007/s00348-008- 0568-3
20. BJ De Gans PC Duineveld US Schubert 2004 Inkjet printing of polymers: state of the art and future developments Adv Mater 16 203 213 10.1002/adma.200300385
21. B De Heij B Van Der Schoot H Bo J Hess NF De Rooij 2000 Characterization of a fL droplet generator for inhalation drug therapy Sens Actuators A Phys 85 430 434 10.1016/S0924-4247(00)00400-3 (Pubitemid 30923664)
22. U Demirci GG Yaralioglu E Hæggström BT Khuri-Yakub 2005 Femtoliter to picoliter droplet generation for organic polymer deposition using single reservoir ejector arrays IEEE Trans Semiconduct Manuf 18 709 715 10.1109/TSM.2005.858500
23. Dixon D (2004) Time pressure dispensing. In: White papers. Universal Instruments. http://www4.uic.com/wcms/WCMS2.nsf/index/Resources-58.html. Accessed 11 Sept 2009
24. I Ederer P Raetsch W Schullerus C Tille U Zech 1997 Piezoelectrically driven micropump for on-demand fuel-drop generation in an automobile heater with continuously adjustable power output Sens Actuators A Phys 62 752 755 10.1016/S0924-4247(97)01576-8
25. S Ekström P Önnerfjord J Nilsson M Bengtsson T Laurell G Marko-Varga 2000 Integrated microanalytical technology enabling rapid and automated protein identification Anal Chem 72 286 293 10.1021/ac990731l (Pubitemid 30051884)
26. Elmqvist R (1951) Measuring instrument of the recording type. US patent 2,566,443
27. Endo I, Sato Y, Saito S, Nakagiri T, Ohno S (1979) Liquid jet recording process and apparatus therefor. UK patent 2,007,162
28. Erdem EY, Baskaran R, Böhringer KF (2008) Vibration induced droplet generation on textured surfaces. IEEE Int Conf MEMS 603-606
29. KC Fan JY Chen CH Wang WC Pan 2008 Development of a drop-on-demand droplet generator for one-drop-fill technology Sens Actuators A Phys 147 649 655 10.1016/j.sna.2008.03.006
30. M Forget M O'Donnell M Davies 2008 Characterization of a liquid bridge microdroplet dispenser for use in molecular diagnosis Proc Inst Mech Eng Part C J Mech Eng Sci 222 777 786 10.1243/09544062JMES712
31. SB Fuller EJ Wilhelm JM Jacobson 2002 Ink-jet printed nanoparticle microelectromechanical systems J Microelectromech Syst 11 54 60 10.1109/84.982863 (Pubitemid 34277078)
32. P Garstecki MJ Fuerstman HA Stone GM Whitesides 2006 Formation of droplets and bubbles in a microfluidic T-junction-scaling and mechanism of break-up Lab Chip 6 437 446 10.1039/b510841a (Pubitemid 43327570)
33. Govor LV, Parisi J, Bauer GH, Reiter G (2005) Instability and droplet formation in evaporating thin films of a binary solution. Phys Rev E 71:051603-1-9
34. Gutmann O, Niekrawietz R, Steinert CP, Sandmaier H, Messner S, De Heij B, Daub M, Zengerle R (2003) Droplet release in a highly parallel, pressure driven nanoliter dispenser. In: International conference on solid-state sensors actuators and microsystem, 364-367
35. CL Hansen E Skordalakes JM Berger SR Quake 2002 A robust and scalable microfluidic metering method that allows protein crystal growth by free interface diffusion Proc Natl Acad Sci USA 99 16531 16536 10.1073/pnas.262485199 (Pubitemid 36034007)
36. CL Hansen MOA Sommer SR Quake 2004 Systematic investigation of protein phase behavior with a microfluidic formulator Proc Natl Acad Sci USA 101 14431 14436 10.1073/pnas.0405847101 (Pubitemid 39346766)
37. Harada T, Ishikawa N, Kanda T, Suzumori K, Yamada Y, Sotowa KI (2008) Droplets generation by a torsional bolt-clamped Langevin-type transducer and micropore plate. In: Proceedings on IEEE international ultrasonics symposium, 627-630
38. M He JS Edgar GDM Jeffries RM Lorenz JP Shelby DT Chiu 2005 Selective encapsulation of single cells and subcellular organelles into picoliter- and femtoliter-volume droplets Anal Chem 77 1539 1544 10.1021/ac0480850 (Pubitemid 40396244)
39. TR Hebner CC Wu D Marcy HM Lu JC Strum 1998 Ink-jet printing of doped polymers for organic light emitting devices Appl Phys Lett 72 519 521 10.1063/1.120807 (Pubitemid 128671226)
40. Hirata S, Ishii Y, Matoba H, Inui T (1996) An ink-jet head using diaphragm microactuator. In: Proceedings of MEMS Workshop, 418-423
41. Hosseini Y, Ikram S, Kaler KVIS (2008) A CMOS optical feedback control for high-speed DEP based microfluidic actuation. Microsyst Nanoelectron Res Conf 137-140
42. D Huang ES Kim 2001 Micromachined acoustic-wave liquid ejector J Microelectromech Syst 10 442 449 10.1109/84.946804 (Pubitemid 32981795)
43. Huebner A, Srisa-Art M, Holt D, Abell C, Hollfelder F, deMello AJ, Edel JB (2007) Quantitative detection of protein expression in single cells using droplet microfluidics. Chem Commun 1218-1220
44. LH Hung KM Choi WY Tseng YC Tan KJ Shea AP Lee 2006 Alternating droplet generation and controlled dynamic droplet fusion in microfluidic device for CdS nanoparticle synthesis Lab Chip 6 174 178 10.1039/b513908b
45. A Jahn WN Vreeland M Gaitan LE Locascio 2004 Controlled vesicle self-assembly in microfluidic channels with hydrodynamic focusing J Am Chem Soc 126 2674 2675 10.1021/ja0318030 (Pubitemid 38314254)
46. JM Jaklevic HR Garner GA Miller 1999 Instrumentation for the genome project Annu Rev Biomed Eng 1 649 678 10.1146/annurev.bioeng.1.1.649
47. TB Jones M Gunji M Washizu MJ Feldman 2001 Dielectrophoretic liquid actuation and nanodroplet formation J Appl Phys 89 1441 1448 10.1063/1.1332799 (Pubitemid 33661909)
48. Kamisuki S, Hagata T, Tezuka C, Nose Y, Fujii M, Atobe M (1998) A low power, small, electrostatically driven commercial inkjet head. In: International workshop on MEMS, 63-68
49. Kamisuki S, Fujii M, Takekoshi T, Tezuka C, Atobe M (2000) A high resolution, electrostatically driven commercial inkjet head. In: International conference on MEMS, 793-798
50. TT Kanagasabapathi KVIS Kaler 2007 Surface microfluidics-high-speed DEP liquid actuation on planar substrates and critical factors in reliable actuation J Micromech Microeng 17 743 752 10.1088/0960-1317/17/4/011 (Pubitemid 46778431)
51. Kanda T, Ishikawa N, Suzumori K, Yoshizawa H, Yamada Y (2007) Droplets generation using micropore plate driven by Langevin type transducer. In: Proceedings of international congress on ultrasonics 1346:1-4
52. Kim KT, Park YW (2008) Feasibility of low-cost microarray printing with inkjet printer. In: International conference on control automation systems, 1932-1935
53. SJ Kim YA Song PL Skipper J Han 2006 Electrohydrodynamic generation and delivery of monodisperse picoliter droplets using a poly(dimethylsiloxane) microchip Anal Chem 78 8011 8019 10.1021/ac061127v (Pubitemid 44871766)
54. Kim C, Lee KS, Lee IH, Shin KS, Kang E, Lee KJ, Kang JY (2007) Three dimensional perfusion culture of encapsulated embryonic stem cells in microfluidic chip. In: International solid-state sensors actuators microsystem conference, 1333-1334
55. Kim J, Byun D, Hong J, deMello AJ (2009) Droplets generation method for water-in-oil state in the polydimethylsiloxane microchannel with grooves. In: IEEE international conference on MEMS, 523-526
56. Koltay P, Birkenmeier B, Steger R, Sandmaier H, Zengerle R (2002) Massive parallel liquid dispensing in the nanoliter range by pneumatic actuation. In: International conference on new Actuators, 235-239
57. S Köster FE Angilè H Duan JJ Agresti A Wintner C Schmitz AC Rowat CA Merten D Pisignano AD Griffiths DA Weitz 2008 Drop-based microfluidic devices for encapsulation of single cells Lab Chip 8 1110 1115 10.1039/b802941e (Pubitemid 351904829)
58. Kyser EL, Sears SB (1976) Method and apparatus for recording with writing fluids and drop projection means therefor. US patent 3,946,398
59. T Laurell L Wallman J Nilsson 1999 Design and development of a silicon microfabricated flow-through dispenser for on-line picolitre sample handling J Micromech Microeng 9 369 376 10.1088/0960-1317/9/4/314 (Pubitemid 30519335)
60. HP Le 1998 Progress and trends in ink-jet printing technology J Imaging Sci Technol 42 49 62
61. Lee ER (2003) Microdrop generation. CRC Press, Boca Raton
62. CH Lee A Lal 2004 Single microdroplet ejection using an ultrasonic longitudinal mode with a PZT/tapered glass capillary IEEE Trans Ultrason Ferroelectr Freq Control 51 1514 1522 10.1109/TUFFC.2004.1367493
63. YS Lee MS Kim SJ Shin S Shin K Kuk DK Sohn 2004 Lumped modeling of crosstalk behavior of thermal inkjet print heads ASME Int Mech Eng Congr Expo 61413 1 8
64. Lee TM, Kang TG, Yang JS, Jo JD, Kim KY, Choi BO, Kim DS (2007) 3D metal microstructure fabrication using a molten metal DoD inkjet system. In: International solid-state sensors actuators microsystem conference, 1637-1640
65. T Lindemann H Ashauer Y Yu DS Sassano R Zengerle P Koltay 2007 One inch thermal bubble jet printhead with laser structured integrated polyimide nozzle plate J Microelectromech Syst 16 420 428 10.1109/JMEMS.2007.892796 (Pubitemid 46564219)
66. Link DR, Anna SL, Weitz DA, Stone HA (2004) Geometrically mediated breakup of drops in microfluidic devices. Phys Rev Lett 92:054503-1-4
67. K Liu HJ Ding J Liu Y Chen XZ Zhao 2006 Shape-controlled production of biodegradable calcium alginate gel microparticles using a novel microfluidic device Langmuir 22 9453 9457 10.1021/la061729+ (Pubitemid 44818544)
68. DL MacFarlane V Narayan DL Tatum JA WR Cox T Chen DJ Hayes 1994 Microjet fabrication of microlens arrays IEEE Photonics Technol Lett 6 1112 1114 10.1109/68.324684
69. Meacham JM, Varady MJ, Degertekin FL, Fedorov AG (2005) Droplet formation and ejection from a micromachined ultrasonic droplet generator: visualization and scaling. Phys Fluids 17:100605-1-8
70. T Miliotis S Kjellström J Nilsson T Laurell LE Edholm G Marko-Varga 2000 Capillary liquid chromatography interfaced to matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using an on-line coupled piezoelectric flow-through microdispenser J Mass Spectrom 35 369 377 10.1002/(SICI)1096-9888(200003)35:3<369::AID-JMS944>3.0.CO;2-N (Pubitemid 30157526)
71. SK Moore 2001 Making chips to probe genes IEEE Spectr 38 54 60 10.1109/6.908856 (Pubitemid 35385171)
72. B Nguon M Jouaneh 2004 Design and characterization of a precision fluid dispensing valve Int J Adv Manuf Technol 24 251 260 10.1007/s00170-003-1738-3
73. T Nisisako T Torii T Higuchi 2002 Droplet formation in a microchannel network Lab Chip 2 24 26 10.1039/b108740c (Pubitemid 37248114)
74. M Orme RF Smith 2000 Enhanced aluminum properties by means of precise droplet deposition ASME J Manuf Sci Eng 122 484 493 10.1115/1.1285914
75. M Orme Q Liu R Smith 2000 Molten aluminum micro-droplet formation and deposition for advanced manufacturing applications Alum Trans J 3 95 103
76. Ozen O, Aubry N, Papageorgiou DT, Petropoulos PG (2006) Monodisperse drop formation in square microchannels. Phys Rev Lett 96:144501-1-4
77. G Perçin BT Khuri-Yaku 2002 Micromachined droplet ejector arrays for controlled ink-jet printing and deposition Rev Sci Instrum 73 2193 2196 10.1063/1.1468684 (Pubitemid 34637554)
78. G Perçin TS Lundgren BT Khuri-Yakub 1998 Controlled ink-jet printing and deposition of organic polymers and solid particles Appl Phys Lett 73 2375 2377 10.1063/1.122465 (Pubitemid 128673989)
79. Piracci AF (2000) Advantages of non-contact dispensing in SMT assembly processes. In: Articles & papers. Asymtek. http://www.asymtek.eu/news/ articles/2000-09-smta-ate.pdf Accessed 11 Sept 2009
80. JWS Rayleigh 1878 On the instability of jets Proc Lond Math Soc 10 4 13 10.1112/plms/s1-10.1.4
81. D Rose 1999 Microdispensing technologies in drug discovery Drug Discov Today 4 411 419 10.1016/S1359-6446(99)01388-4 (Pubitemid 29391465)
82. CM Roth ML Yarmush 1999 Nucleic acid biotechnology Annu Rev Biomed Eng 1 265 297 10.1146/annurev.bioeng.1.1.265
83. JDJS Samuel R Steger G Birkle R Zengerle P Koltay J Rühe 2005 Modification of micronozzle surfaces using fluorinated polymeric nanofilms for enhanced dispensing of polar and nonpolar fluids Anal Chem 77 6469 6474 10.1021/ac050878e (Pubitemid 41436988)
84. M Schena RA Heller TP Theriault K Konrad E Lachenmeier RW Davis 1998 Microarrays: biotechnology's discovery platform for functional genomics Trends Biotechnol 16 301 306 10.1016/S0167-7799(98)01219-0 (Pubitemid 28305253)
85. H Song RF Ismagilov 2003 Millisecond kinetics on a microfluidic chip using nanoliters of reagents J Am Chem Soc 125 14613 14619 10.1021/ja0354566 (Pubitemid 37452397)
86. H Song JD Tice R Ismagilov 2003 A microfluidic system for controlling reaction networks in time Angew Chem Int Ed Engl 42 767 772
87. V Srinivasan VK Pamula RB Fair 2004 Droplet-based microfluidic lab-on-a-chip for glucose detection Anal Chim Acta 507 145 150 10.1016/j.aca.2003.12.030 (Pubitemid 38224100)
88. JC Stachowiak DL Richmond TH Li AP Liu SH Parekh DA Fletcher 2008 Unilamellar vesicle formation and encapsulation by microfluidic jetting Proc Natl Acad Sci USA 105 4697 4702 10.1073/pnas.0710875105 (Pubitemid 351753809)
89. Steger R, Koltay P, Birkle G, Strobelt T, Sandmaier H, Zengerle R (2002) Two-dimensional array of piezostack actuated nanoliter dispensers. In: International conference on new actuators, 537-541
90. Steinert CP, Goutier I, Gutmann O, Sandmaier H, Messner S, Daub M, De Heij B, Zengerle R (2003) An improved 24 channel picoliter dispenser based on direct liquid displacement. In: International conference on solid-state sensors actuators microsystems, 376-379
91. S Sugiura M Nakajima S Iwamoto S Seki 2001 Interfacial tension driven monodispersed droplet formation from microfabricated channel array Langmuir 17 5562 5566 10.1021/la010342y (Pubitemid 35330795)
92. G Sui MC Leu 2003 Investigation of layer thickness and surface roughness in rapid freeze prototyping ASME J Manuf Sci Eng 125 556 563 10.1115/1.1556401
93. RG Sweet 1965 High frequency recording with electrostatically deflected ink jets Rev Sci Instrum 36 131 136 10.1063/1.1719502
94. GL Switzer 1991 A versatile system for stable generation of uniform droplets Rev Sci Instrum 62 2765 2771 10.1063/1.1142211
95. JB Szczech CM Megaridis DR Gamota J Zhang 2002 Fine-line conductor manufacturing using drop-on-demand PZT printing technology IEEE Trans Electron Packag Manuf 25 26 33 10.1109/TEPM.2002.1000480 (Pubitemid 34692316)
96. S Takahashi H Kitagawa Y Tomikawa 2002 A study of liquid dispensing head using fluidic inertia Jpn J Appl Phys 41 3442 3445 10.1143/JJAP.41.3442
97. WH Tan S Takeuchi 2007 Monodisperse alginate hydrogel microbeads for cell encapsulation Adv Mater 19 2696 2701 10.1002/adma.200700433 (Pubitemid 47481838)
98. Tan YC, Collins J, Lee AP (2003) Controlled fission of droplet emulsion in bifurcating microfluidic channels. In: International conference on solid-state sensors actuators microsystem, 28-31
99. Tan ZW, Teo SGG, Hu J (2008) Ultrasonic generation and rotation of a small droplet at the tip of a hypodermic needle. J Appl Phys 104:104902-1-5
100. Tseng FG, Linder C, Kim CJ, Ho CM (1996) Control of mixing with micro injectors for combustion application. In: Proceedings of MEMS ASME IMECE, 183-197
101. Tseng FG, Kim CJ, Ho CM (1998) A microinjector free of satellite drops and characterization of the ejected droplets. Symp Appl Micro-Fabr Fluid Mech 89-95
102. Tseng FG, Kim CJ, Ho CM (1998) A novel microinjector with virtual chamber neck. In: Proceedings of international workshop on MEMS, 57-62
103. FG Tseng CJ Kim CM Ho 2002 A high-resolution high-frequency monolithic top-shooting microinjector free of satellite drops-part i: concept, design, and model J Microelectromech Syst 11 427 436 10.1109/JMEMS.2002.802900 (Pubitemid 35242047)
104. FG Tseng CJ Kim CM Ho 2002 A high-resolution high-frequency monolithic top-shooting microinjector free of satellite drops-part ii: fabrication, implementation, and characterization J Microelectromech Syst 11 437 447 10.1109/JMEMS.2002.802901 (Pubitemid 35242048)
105. H Ulmke T Wriedt K Bauckhage 2001 Piezoelectric droplet generator for the calibration of particle-sizing instruments Chem Eng Technol 24 265 268 10.1002/1521-4125(200103)24:3<265::AID-CEAT265>3.0.CO;2-4 (Pubitemid 32258818)
106. Vaught JL, Cloutier FL, Donald DK, Meyer JD, Tacklind CA, Taub HH (1984) Thermal ink jet printer. US patent 4,490,728
107. T Ward M Faivre M Abkarian HA Stone 2005 Microfluidic flow focusing: drop size and scaling in pressure versus flow-rate-driven pumping Electrophoresis 26 3716 3724 10.1002/elps.200500173 (Pubitemid 41512024)
108. H Wu A Wheeler RN Zare 2004 Chemical cytometry on a picoliter-scale integrated microfluidic chip Proc Natl Acad Sci USA 101 12809 12813 10.1073/pnas.0405299101 (Pubitemid 39167540)
109. HC Wu HJ Lin WS Hwang 2005 A numerical study of the effect of operating parameters on drop formation in a squeeze mode inkjet device Model Simul Mater Sci Eng 13 17 34 10.1088/0965-0393/13/1/002 (Pubitemid 40121769)
110. Wu L, Li GP, Xu W, Bachman M (2006) Droplet formation in microchannels under static conditions. Appl Phys Lett 89:144106-1-3
111. S Yuan Z Zhou G Wang C Liu 2003 MEMS-based piezoelectric array microjet Microelectron Eng 66 767 772 10.1016/S0167-9317(02)00997-8
112. M Zhang O Ma X Diao 2006 Dynamics modeling and analysis of inkjet technology-based oligo DNA microarray spotting IEEE Trans Autom Sci Eng 3 159 168 10.1109/TASE.2006.871480
113. YX Zhao HX Li H Ding YL Xiong 2005 Integrated modelling of a time-pressure fluid dispensing system for electronics manufacturing Int J Adv Manuf Technol 26 1 9 10.1007/s00170-003-1978-2 (Pubitemid 40963656)
114. H Zhu M Snyder 2003 Protein chip technology Curr Opin Chem Biol 7 55 63 10.1016/S1367-5931(02)00005-4 (Pubitemid 36126493)
115. Zoltan SI (1972) Pulsed droplet ejecting system. US patent 3,683,212