Interaction of manufacturing process and machine tool

CIRP Annals - Manufacturing Technology

Volumn 58, Issue 2, 2009, Pages 588-607

  Brecher, C ^a   Esser, M ^a   Witt, S ^a  

^a RWTH AACHEN UNIVERSITY   (Germany)

Author keywords

Machine; Modelling; Process machine interaction

Indexed keywords

BULK METAL FORMING; CUTTING EDGES; IN-PROCESS; INTERACTION PHENOMENA; KEY PROCESS; MACHINE; MACHINING PROCESS; MANUFACTURING PROCESS; MANUFACTURING SYSTEM; MODELLING; PROCESS MACHINE; PROCESS-MACHINE INTERACTION; RESEARCH GROUPS; STATE OF RESEARCH; THERMAL DEFORMATION;

INDUSTRIAL ENGINEERING; MACHINE TOOLS; MACHINING; MANUFACTURE; METAL CUTTING; METAL FORMING; PRODUCTION ENGINEERING; SHEET METAL; VIBRATION ANALYSIS;

INDUSTRIAL RESEARCH;

EID: 70449529383     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2009.09.005     Document Type: Article

References (227)

1. Abele E., and Fiedler U. Creating Stability Lobe Diagrams during Milling. Annals of the CIRP 53 1 (2004) 309-312
2. Abele E., Kulok M., and Weigold M. Analysis of a Machining Industrial Robot. Proceedings of the 10th International Science Conference on Prodiction Engineering. Lumbarda, Croatia (2005)
3. Abele E., Weigold M., and Kulok M. Increasing the Accuracy of a Milling Industrial Robot. Production Engineering 13 2 (2006) 221-224
4. Abele E., Weigold M., and Rothenbücher S. Modeling and Identification of an Industrial Robot for Machining Applications. Annals of the CIRP 56 1 (2007) 387-390
5. Abele E., Bauer J., Rothenbücher S., Stelzer M., and von Stryk O. Prediction of the Tool Displacement by Coupled Models of the Compliant Industrial Robot and the Milling Process. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 223-231
6. Ahn J., Lee D., Kim S., Kim H., and Cho K. Effects of Synchronizing Errors on Cutting Performance in the Ultra-High-Speed Tapping. Annals of the CIRP 52 1 (2003) 53-56
7. Alldieck J (1994) Simulation des dynamischen Schleifprozessverhaltens, Dissertation, RWTH Aachen University.
8. Altan T., and Vazquez V. Numerical Process Simulation for Tool and Process Design in Bulk Metal Forming. Annals of the CIRP 54 2 (1996) 599-615
9. Altan T., Shirgaokar M., and Yadav A. Simulation and Optimization of Metal Forming Processes-New Applications and Challenges. Proceedings of the 19th Umformtechnisches Kolloquium Hannover - Umformtechnik - Ein Wirtschaftszweig mit Potential. Hannover, Germany (2008) 173-186
10. Altintas Y., and Weck M. Chatter Stability in Metal Cutting and Grinding. Annals of the CIRP 53 2 (2004) 619-642
11. Altintas Y., Brecher C., Weck M., and Witt S. Virtual Machine Tool. Annals of the CIRP 54 2 (2005) 651-674
12. Altintas Y., and Budak E. Analytical Prediction of Stability Lobes in Milling. Annals of the CIRP 44 1 (1995) 357-362
13. Altintas Y., and Cao Y. Virtual Design and Optimization of Machine Tool Spindles. Annals of the CIRP 54 1 (2005) 379-382
14. Altintas Y., Eynian M., and Onozuka H. Identification of Dynamic Cutting Force Coefficients and Chatter Stability with Process Damping. Annals of the CIRP 57 1 (2008) 371-374
15. Altintas Y., and Merdol D. Virtual High Performance Milling. Annals of the CIRP 55 1 (2007) 81-84
16. Altintas Y., Montgomery D., and Budak E. Dynamic Peripheral Plate Milling of Flexible Structures, Transactions of ASME. Journal of Engineering for Industry 114 (1992) 137-145
17. Arentoft M., and Wanheim T. A New Approach to Determine Press Stiffness. Annals of the CIRP 54 1 (2005) 265-268
18. Bailey M, Hedges L (1995) Die Kristallmorphologie von Diamanten und ABN, IDR - Industrie Diamanten Rundschau, 3/95.
19. Bariani P., Dal Negro T., and Bruschi S. Testing and Modelling of Material Response to Deformation in Bulk Metal Forming. Annals of the CIRP 53 2 (2004) 573-596
20. Beer C (1994) CAD/CAP unterstützte Generierung ratterfreier NC-Programme für das Schaftfräsen, Dissertation, RWTH Aachen University.
21. Behrens B, Landgrebe D (1999) Anwendung der FE-Simulation auf dreidimensionale Massivumformprozesse - Probleme und Lösungen, Umformtechnik 2000 Plus, Bamberg, Germany, pp. 71-80.
22. Behrens B., Brecher C., Hork M., and Werbs M. New Standardized Procedure for the Measurement of the Static and Dynamic Properties of Forming Machines. Production Engineering 1 1 (2007) 31-36
23. Behrens B., Ahrens M., Dietrich F., and Poelmeyer J. Modellbildung zur Berücksichtigung des Maschineneinflusses in der numerischen Simulation von Umformprozessen mittels gekoppelter Simulation. Proceedings of 12th Dresdner WZM-Fachseminar. Dresden, Germany (2007) 3.1-3.5
24. Behrens B., Matthias T., Czora M., Poelmeyer J., and Ahrens M. Improving the Accuracy of Numerical Investigations of Multi-Stage Sheet Metal Processes by Coupling a Process FE Analysis with the Machine Simulation. Proceedings of 1st International Conference on PMI. Hannover, Germany (2008) 133-139
25. Berkemer J. Simulation der Wechselwirkung von Maschine. VDI Schwingungstagung. Fulda, Germany. Regelung und Prozess in hochdynamischen Werkzeugmaschinen (2006) 325-342
26. Biermann D., Kersting M., and Surmann T. Simulation der Prozessdynamik beim Einlippenbohren. wt-Werkstatttechnik Online 97 11/12 (2007) 879-883
27. Biermann D., Weinert K., Enk D., Hossam M., and Raabe N. Controlling Approach for the BTA Deep Hole Drilling Process to Avoid Spiralling. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 53-60
28. Biermann D., Aurich J., Blum H., Brecher C., Carstensen C., Denkena B., Klocke F., Kröger M., Steinmann P., and Weinert K. Modelling and Simulation of PMI in Grinding. Production Engineering 3 1 (2008) 245-252
29. Biermann D., Surmann T., and Kehl G. Oszillatormodell für Werkzeugmaschinen zur Simulation von Zerspanprozessen. wt Werkstattstechnik online 98 (2008) 185-190
30. Blau P., Neugebauer R., and Weiß J. Schwerpunkte der Simulation des dynamischen Verhaltens von Umformmaschinen. Proceedings of 10th Sächsische Fachtagung Umformtechnik, ICAFT Chemnitz. Germany (2003) 261-276
31. Bogon P. Eine aktuelle Aufgabe für die Simulation. Ganzheitliche Betrachtung von Maschine, Werkzeug und Prozess, Blech, Rohre. Profile 9 (1999) 60-65
32. Brandt C., Karimi H., Piotrowska I., Niebsch J., Ramlau R., Krause A., Riemer O., and Maaß P. PMI Model for Turning Processes. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 239-246
33. Brecher C., and Witt S. Simulation of Machine Process Interaction with Flexible Multi-Body Simulation. Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations. Bled, Slovenia (2006) 171-178
34. Brecher C., Schapp L., and Paepenmüller F. Gekoppelte Simulation von Presse und Massivumformprozess-Berücksichtigung (nicht-) linearen Maschinenverhaltens in der Umformsimulation. wt Werkstattstechnik online 7 8 (2006) 526-529
35. Brecher C., Esser M., and Witt S. Simulation of the Process Stability of HPC-Milling Operations under Consideration of the Nonlinear Behaviour of the Machine Tool and the Cutting Process. Proceedings of the 10th CIRP International Workshop on Modelling of Machining Operations. Calabria, Italy (2007) 437-444
36. Brecher C., Klocke F., Witt S., and Frank P. Methodology for Coupling a FEA-Based Process model with a Flexible Multi-Body Simulation of a Machine Tool. Proceedings of the 10th International Workshop on Modelling of Machining Operations. Calabria, Italy (2007) 453-468
37. Brecher C, Witt S, Marsolek J, Steinicke M, Piendl S (2007) Konzepte zur Kopplung von Zerspanprozess-und Maschinensimulation und deren mögliche Umsetzung, Abschlussbericht des Verbundprojektes Simulation industrieller Bearbeitungsprozesse (SindBap), Tagungsband zum Abschlusskolloquium, Aachen, pp. 107-120.
38. Brecher C., and Hannig S. Wirtschaftliche Messung und Beurteilung der dynamischen Systemnachgiebigkeit von Schleifmaschinen, Jahrbuch Schleifen, Honen. Läppen und Polieren 63 (2007) 198-211
39. Brecher C., and Schapp L. Simulationsunterstützte Optimierung von Mehrstufenwerkzeugen bei Berücksichtigung des nicht-linear-elastischen Pressenverhaltens. ZWF 10 (2007) 620-625
40. Brecher C., Schapp L., and Tannert M. Simulation-Aided Optimization of Multi-Stage Dies-Coupled Simulation of Forging Processes with Non-Linear-Elastic Machine Models. Proceedings of 1st International Conference on PMI. Hannover, Germany (2008) 167-174
41. Brecher C. Schließen der Simulationskette "Prozess-Maschine-Steuerung". Proceedings of Aachener Werkzeugmaschinen Kolloquium. Aachen, Germany (2008) 276-279
42. Brecher C., and Esser M. The Consideration of Dynamic Cutting Forces in the Stability Simulation of HPC-Milling Processes. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 7-14
43. Britz R., and Ulbrich H. Lathe: Modeling and Coupling of Process and Structure. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 231-238
44. Brinksmeier E., Heinzel C., and Wittmann M. Friction, Cooling and Lubrication in Grinding. Annals of the CIRP 48 2 (1999) 581-598
45. Brinksmeier E., Klocke F., Giwerzew A., and Vucetic D. Spanbildungsmechanismen beim Schleifen mit niedrigen Schnittgeschwindigkeiten. IDR 4 (2002) 285-293
46. Brinksmeier E., Aurich J., Govekar E., Heinzel C., Hoffmeister H., Klocke F., Peters J., Rentsch R., Stephenson D., Uhlmann E., Weinert K., and Wittmann M. Advances in Modeling and Simulation of Grinding Processes. Annals of the CIRP 55 2 (2006) 667-696
47. Van Brussel H (1971) Dynamische Analyse van het Verspaningsproces. Katholieke Universiteit Leuven, Dissertation, printed as manuscript.
48. Budak E. Analytical Models for High Performance Milling. Part I. Cutting forces, Structural Deformations and Tolerance Integrity. International Journal of Machine Tools and Manufacture 46 (2006) 1478-1488
49. Budak E. Analytical Models for High Performance Milling. Part II. Process Dynamics and Stability. International Journal of Machine Tools and Manufacture 46 (2006) 1489-1499
50. Budak E., Altintas Y., and Armarego E. Prediction of Milling Force Coefficients from Orthogonal Cutting Data, Transactions of ASME. Journal of Manufacturing Science and Engineering 118 2 (1996) 216-224
51. Budak E., and Kayhan M. Investigating Effects of Chatter Vibrations on Tool Wear in Turning. Proceedings of 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering. Sorrento, Italy (2004) 679-684
52. Budak E., and Ozlu E. Analytical Modeling of Chatter Stability in Turning and Boring Operations: A Multi-Dimensional Approach. Annals of the CIRP 56 1 (2007) 401-404
53. Bryan J. International Status of Thermal Error Research. Annals of the CIRP 32 2 (1990) 645-656
54. Byrne G., Dornfeld D., and Denkena B. Advancing Cutting Technology. Annals of the CIRP 52 2 (2003) 483-507
55. Cao Y., and Altintas Y. A General Method for the Modeling of Spindle-Bearing Systems. Transactions of ASME: Journal of Machine Design 126 (2004) 1089-1104
56. Chodnikiewicza K., and Balendra R. The Calibration of Metal-forming Presses. Journal of Materials Processing Technology 106 (2000) 28-33
57. Corduan N., Costes J., Lapujoulade F., and Larue A. Experimental Approach of Milling Stability of Thin Walled Parts. Comparison with Time Domain Simulation. Proceedings of the 9th CIRP International Workshop on Modelling of Machining Operations. Bled, Slovenia (2006) 59-69
58. D'Acunto A., Al-Ahmad M., Lescalier C., and Bomont O. Cutting Force Prediction of Vertical Milling Operation using Different Configurations of Cutter Immersion-Modeling and Experimentation. Proceedings of the CIRP 10th International Workshop on Modelling of Machining Operations. Calabria, Italy (2007) 165-171
59. Dall A. Rounding Effect in Centerless Grinding. Mechanical Engineering 58 (1946) 325-329
60. Denkena B., Tracht K., and Deichmüller M. Wechselwirkungen zwischen Struktur und Prozess beim Werkzeugschleifen. wt Werkstattstechnik online 96 11 12 (2006) 814-819
61. Denkena B., Tracht K., and Clausen M. Predictability of Milling Forces Based on Specific Cutting Forces. Proceedings of the 8th CIRP International Workshop on Modeling Machining Operations. Chemnitz, Germany (2005) 259-266
62. Denkena B., Tracht K., and Schmidt C. A Flexible Force Model for Predicting Cutting Forces in End Milling. Production Engineering 13 1 (2006) 15-20
63. Denkena B., Möhring H., Will J., and Sellmeier V. Prozessstabilität einer piezoaktorisch gelagerten Frässpindel. wt Werkstatttechnik online 9 (2006) 669-675
64. Denkena B., and Schmidt C. Experimental Investigation and Simulation of Machining Thin-Walled Workpieces. Production Engineering 1 4 (2007) 343-350
65. Denkena B., Deichmüller M., Kröger M., Panning L., Carstensen C., and Kilian S. Modeling and Simulation of the Process Machine Interaction during Tool Grinding Processes. Proceedings of 10th CIRP International Workshop on Modeling of Machining Operations. Calabria, Italy (2007) 391-398
66. Denkena B., Deichmüller M., Kröger M., Popp K., Carstensen C., Schroeder A., and Wiedemann S. Geometrical analysis of the complex contact area for modeling the local distribution of process forces in tool grinding. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 289-298
67. DIN 55189 (1988) Machine tools-determination of the ratings of presses for sheet metal working under static load, Beuth Verlag, Berlin, Germany.
68. Eberhard P., Gaugele T., Heisel U., and Storchak M. A Discrete Element Model Used in a Co-simulated Charpy Impact Test and for Heat Transfer. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 361-368
69. Epureanu B., Dowell E., and Montoya F. Pattern Formation and Linear Stability Analysis in Centreless Grinding. Proceedings of the Institution of Mechanical Engineers (1997) 619-626
70. Elbestawi M., Ismail F., Du R., and Ullagaddi B.C. Modelling Machining Dynamics Including Damping in the Tool-Workpiece Interface. Journal of Engineering for Industry 116 (1994) 435-439
71. Engel U., Kroiß T., and Völkl R. Berechnung der Wechselwirkungen zwischen Umformmaschine und -prozess auf Basis der Integration eines Pressenmodells in die FE-Fließpresssimulation. Proceedings of the 12th Dresdner WZM-Fachseminar. Dresden, Germany (2007) 9.1-9.12
72. Enk D., and Surmann T. Analysis of the Cutting Tool Vibration while Milling with Changing Engagement Conditions. Proceedings of the 9th CIRP International Conference on Modeling of Machining Operations. Bled, Slovenia (2006) 139-144
73. Feng H., Azeem A., and Wang L. Simplified and Efficient Calibration of a Mechanistic Cutting Force Model for Ball-End Milling. Machine Tools and Manufacture 44 (2004) 217-268
74. Filice L., Micari F., Rizzuti S., and Umbrello D. Dependance of Machining Simulation Effectiveness on Material and Friction Modelling. Machining Science and Technology 12 (2007) 370-389
75. Fleischer J., Schmidt J., Schmidt C., and Schermann T. Zerspanungssimulation - als wichtiger Baustein zur Kopplung von Prozess und Maschine, Springer Verlag. VDI-Z - integrierte Produktion 2 (2005) 63
76. Folkerts W (1993) Dynamische Prozesskennwerte des Schleifens und deren Einfluss auf das Prozessverhalten, Dissertation, RWTH Aachen University.
77. Fortunato A., Mantega C., Donati L., and Tani G. Milling Force Prediction by Means of Analytical Model and 3D FEM Simulations. Proceedings of the 9th CIRP International Workshop on Modelling of Machining Operations. Bled, Slovenia (2006) 211-213
78. Franzke M., Puchhala S., and Dackweiler H. Modelling the interaction effects between tools and the workpiece for metal forming processes. Proceedings of NUMIFORM 2007, 9th International Conference on Numerical Methods in Industrial Forming Processes, vol. 908. Porto, Portugal (2007) 1489-1494
79. Franzke M., Puchhala S., Dackweiler H., and Hirt G. Gekoppelte Analyse von Massivumformprozessen mit LASTRAN/Shape. Proceedings of MEFORM 2008 - Simulation von Umformprozessen. Freiberg, Germany (2008) 119-130
80. Franzke M., Puchhala S., Dackweiler H., and Hirt G. Modeling of Interaction Effects between the Process and Machine during Flat Rolling Process. Proceedings of 1st International Conference on PMI. Hannover, Germany (2008) 149-156
81. Freiherr T (1999) Experimentelle und rechnergestützte Analyse des dynamischen Genauigkeitsverhaltens einer Kurbelpresse, Dissertation, University Kassel.
82. Freiherr T, Wagener H (2004) Laser-Mess-technik als Voraussetzung für die Weiterentwicklung umformtechnischer Produktionssysteme, wt Werkstattstechnik online vol. 94/5, pp. 199-203.
83. Friedrich D (2004) Prozessbegleitende Beeinflussung des geometrischen Rundungseffektes beim spitzenlosen Außenrundeinstechschleifen, Dissertation, RWTH Aachen University.
84. Furukawa Y., and Miyashita M. Chatter Vibration in Centerless Grinding. Bulletin of the JSME 13 64 (1970) 1274-1283
85. Gallego I. Intelligent Centerless Grinding: Global Solution for Process Instabilities and Optimal Cycle Design. Annals of the CIRP 56 1 (2007) 347-352
86. Gallego I., Lizarralde R., Barrenetxea D., and Arrazola P. Precision, Stability and Productivity Increase in Thrufeed Centerless Grinding. Annals of the CIRP 55 1 (2006) 351-354
87. Gonzalo O., Peigne G., and Gonzalez D. Thin-Walled Features High Speed Machining Simulation. Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations. Bled, Slovenia (2006) 123-130
88. Gurney J. An Analysis of Centerless Grinding. Journal of Engineering for Industry 87 (1964) 163-174
89. Groche P., Fritsche D., Tekkaya E., Allwood J., Hirt G., and Neugebauer R. Incremental Bulk Metal Forming. Annals of the CIRP 56 2 (2007) 635-656
90. Großmann K. Software-Werkzeuge zur Anlagensimulation - eine Bestandsaufnahme. Proceedings of 4th Sächsische Fachtagung Umformtechnik - Wirtschaftsfaktor Umformtechnik. Chemnitz (1997) 216-252
91. Großmann K. Simulationspotenzial an Umformmaschinen. Proceedings of 6th Dresdner Werkzeugmaschinen-Fachseminar. Dresden, Germany (2003) pp. 1.1-1.47
92. Großmann K., Wiemer H., Groche P., and Hofmann T. Modellgestützte Analyse von Pressmaschinen auf Grundlage experimentell verifizierter Parameter. EFB-Forschungsbericht No. 245. Hannover, Germany (2006) 1-160
93. Großmann K., Hardtmann A., and Wiemer H. Simulation des Blechumformprozesses unter Berücksichtigung des statischen Verhaltens der Pressmaschine. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 101 10 (2006) 600-605
94. Großmann K., Wiemer H., Hardtmann A., and Penter L. Faster to Sound Parts by Advanced Forming Process Simulation-Advanced Forming Process Model Including the Elastic Effects of the Forming Press and Tool. Steel Research International 78 (2007) 825-830
95. Großmann K., Wiemer H., Hardtmann A., and Penter L. Stand der Simulation von Umformprozessen mit den elastischen Einflüssen aus Maschine und Werkzeug. Proccecings of des EFB-Kolloquium - Neue Wege zum wirtschaftlichen Leichtbau, vol. T27. Fellbach, Germany (2007) 185-198
96. Großmann K., Hardtmann A., Wiemer H., and Penter L. An Advanced Forming Process Model including the Interactions between Machine, Tool and Process. Proceedings of 1st International Conference on PMI. Hannover, Germany (2008) 125-132
97. Großmann K., and Wiemer H. Feasibilities of Advanced Forming Process Modelling Considering the Interactions with Dies and Machines. Proceedings of Conference New Developments in Sheet Metal Forming Technology. Fellbach bei Stuttgart, Germany (2008) 311-350
98. Großmann K., and Wiemer H. Maschine, Werkzeug und Prozess - ein ganzheitliches System. Proceedings of 6th Sächsische Fachtagung Umformtechnik. Dresden, Germany (1999) 210-227
99. Guo C., Malkin S., Kovach J., and laurich M. Computer Simulation of Below Centre and Above Centre Centreless Grinding. Machining Science and Technology 1 2 (1998) 235-249
100. Hamm C, Dietmair A, Croon N (2006) Gekoppelte "Offline-Simulation" mit bidirektionaler Anbindung einer NC-Steuerung (VNCK), Final Report on the BMBF-Project SimCAT, pp. 41-46.
101. Hannig S (2006) Analysis and Modelling of the Dynamic Behaviour of Grinding Processes, Fortschritts-Berichte VDI Vol. 660/4.
102. Hannig S (2008) Analyse, Modellierung und Simulation des dynamischen Verhaltens beim spitzenlosen Einstechschleifen, Dissertation, RWTH Aachen University.
103. Harrison A., and Pearce T. Prediction of Lobe Growth and Decay in Centreless Grinding based on Geometric Considerations. Proceedings of the Institution of Mechanical Engineers (2002) 1201-1216
104. Helduser S., Lohse H., Behrens B., Marthiens O., and Poelmeyer J. Comprehensive Simulation of Hydraulic Deepdrawing Presses Including the Forming Process. Proceedings of 6th IFK, International Fluid Power Conference. Dresden, Germany (2008) 171-185
105. Hermann M., Fiderer M., and Walters J. State-of-the-Art in Process Simulation of Forming Processes. Proceedings of Conference on New Developments in Forging Technology. Fellbach bei Stuttgart, Germany (2005) 357-372
106. Herzenstiel P., Ching C., Ricker S., Menzel A., Steinmann P., and Aurich J. Interaction of Process and Machine During High Performance Grinding-Towards a Comprehensive Simulation Concept. International Journal of Manufacturing Technology and Management 12 1-3 (2007) 155-170
107. Heylen W., Lammens S., and Sas P. Modal Analysis Theory and Testing (2003), KU Leuven ISBN 90-7380261-X
108. Hoffmann F., and Brecher C. Simulation dynamischer Bahnabweichungen von Werkzeugmaschinen. Proceedings of VDI Conference "Elektrisch-mechanische Antriebssysteme". Düsseldorf, VDI (2006) 301-314
109. Hoffmann F (2008) Optimierung der dynamischen Bahngenauigkeit von Werkzeugmaschinen mit der Mehrkörpersimulation, Dissertation, RWTH Aachen University.
110. Hövel S (2008) Finite Elemente Simulation von Zerspanvorgängen mit geometrisch bestimmter Schneide, Dissertation, TU Kaiserslautern University.
111. Inasaki I. Selbsterregte Ratterschwingungen beim Schleifen, Methoden zu Ihrer Unterdrückung. Werkstatt und Betrieb 110 8 (1977) 521-524
112. Inasaki I. Grinding Process Simulation Based on the Wheel Topography Measurement. Annals of the CIRP 45 1 (1996) 347-350
113. Inasaki I., Karpuschewski B., and Lee H. Grinding Chatter-Origin and Suppression. Annals of the CIRP 50 2 (2001) 515-534
114. Insperger T., Edes B., Mann B., and Stepan G. The Effect of Runout on the Chatter Frequencies of Milling Processes. Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations. Bled, Slovenia (2006) 301-314
115. Jansen T (2007) Entwicklung einer Simulation für den NC-Formschleifprozess mit Torusschleifscheiben, Dissertation, TU Dortmund University.
116. Jrad M., Devillez A., and Dudzinski D. Thermomechanical Approach of Drilling Based on a CAD Definition. Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations. Bled, Slovenia (2006) 247-253
117. Kalveram M (2005) Analyse und Vorhersage der Prozessdynamik und der Prozessstabilität beim Hochgeschwindigkeitsfräsen, Dissertation, TU Dortmund University.
118. Kassen G (1969) Beschreibung der elementaren Kinematik des Schleifvorganges, Dissertation, RWTH Aachen University.
119. Kegg R. Cutting Dynamics in Machine Tool Chatter. ASME Journal of Engineering for Industry 87 4 (1965) 464-470
120. Kempa B (2000) Zahnflankenprofilschleifen mit galvanisch-gebundenem CBN, Dissertation, RWTH Aachen University.
121. Kienzle O. Die Bestimmung von Kräften und Leistungen an spanenden Werkzeugen und Werkzeugmaschinen. VDI Z 94 11-12 (1952) 299
122. Kienzle O. Einfluss der Wärmebehandlung von Stählen auf die Hauptschnittkraft beim Drehen. Stahl Eisen 74 (1954) 530-551
123. Kim K. 2-Dimensional Modelling of Centreless Grinding, Interference Phenomena, Infeed (Plunge) Process. International Journal of KSPE 4 4 (2003) 32-38
124. Kleiner M., Geiger M., and Klaus A. Manufacturing of Lightweight Components by Metal Forming. Annals of the CIRP 52 2 (2003) 521-542
125. Klocke F., and Eisenblätter G. Dry Cutting. Annals of the CIRP 46 2 (1997) 519-526
126. Klocke F., and Krieg T. Coated Tools for Metal Cutting-Features and Applications. Annals of the CIRP 48 2 (1999) 515-525
127. Klocke F., Raedt H., and Hoppe S. 2D-FEM Simulation of the Orthogonal HSC Process. Proceedings of the Fourth CIRP International Workshop of Machining Operations. Delft, Netherlands (2001) 117-124
128. Klocke F. Modelling und Simulation in Grinding. Proceedings of the 1st European Conference on Grinding. Aachen, Fortschritt-Berichte VDI (2003) 8.1-8.27
129. Klocke F., Duscha M., Hoffmann F., Wegner H., and Zeppenfeld C. Proceedings of the 1st International Conference on PMI. Machine-Grinding Wheel-Workpiece Interaction in Speed Stroke Grinding (2008) 259-266
130. Klotz N (1987) Beurteilung des statischen und dynamischen Verhaltens von Umfangsschleifmaschinen, Dissertation, RWTH Aachen University.
131. König W, Schreitmüller H, Hönscheid W (1972) Untersuchung des Spitzenlosschleifens, Forschungsbericht des Landes Nordrhein-Westfalen, Nr. 2288, Westdeutscher Verlag Opladen.
132. König W., Cronjäger L., Spur G., Tönshoff K., Vigneau M., and Zdeblick J. Machining of New Materials. Annals of the CIRP 39 2 (1990) 673-681
133. Körner E., Szentmihalyi V., and Lutz M. Rechnergestützte Entwicklung von Präzisionsumformteilen. Proceedings of the Confernce Neuere Entwicklungen in der Massivumformung. Fellbach bei Stuttgart, Germany, June 3-4 (2003) 279-298
134. Krimm R (2006) Berechnung der lastabhängigen Maschinenauffederung zur Verkürzung der Anlaufzeit neuer Transferwerkzeugsätze, Dissertation, University of Hannover.
135. Kroiß T., Völkl R., Engel U., and Geiger M. Modeling of Process-Tool-Machine Interactions in Cold Forging. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 175-182
136. Law S., and Wu S. Simulation Study of the Grinding Process. Transactions of the ASME Journal of Engineering for Industry 1 73 (1973) 972-978
137. Lee D. Modeling of High-Speed Tapping Torque Considering Friction Force. KSPE 18 (2001) 67-73
138. Lizarralde R., Barrenetxea D., Gallego I., and Marquinez J. Practical Application of New Simulation Methods for the Elimination of Geometric Instabilities in Centerless Grinding. Annals of the CIRP 54 1 (2005) 273-276
139. van Luttervelt C., Childs T., Jawahir I., Klocke F., and Venuvinod P. Present Situation and Future Trends in Modelling of Machining Operations. Annals of the CIRP 47 2 (1998) 587-626
140. Malkin S., and Guo C. Thermal Analysis of Grinding. Annals of the CIRP 56 2 (2007) 760-782
141. Meier H., Reese S., Bertsch C., and Laurischkat R. Increase of the Dimensional Accuracy of Sheet Metal Parts utilizing a Model-Based Path Design for Robot-Based Forming Processes. Proceedings of 1st International Conference on PMI. Hannover, Germany (2008) 141-148
142. Mense C., and Uhlmann E. Analysis of the Milling Machine Operating Behaviour for Process Stability Prediction and Machine Tool Optimisation. Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations. Calabria, Italy (2007) 421-428
143. Merrit H. Theory of Self-Excited Machine-Tool Chatter Contribution to Machine-Tool Chatter. Journal of Engineering for Industry 87 4 (1965) 454-477
144. Michels F (1999) Stabilisierung des Schleifprozesses mit aktiven Systemen, Dissertation, RWTH Aachen University.
145. Miyashita M., Hashimoto F., and Kanai A. Diagram for Selecting Chatter Free Conditions of Centerless Grinding. Annals of the CIRP 31 1 (1982) 221-223
146. Möhring W, Fischer R, Melchinger A (2006) Simulation großer Verfahrwege in der FEM, Abschlussbericht des BMBF- Verbundforschungsprojekts SimCAT, pp. 47-50.
147. Moreau V., Costes J., and Fores C. Investigation on Tool Dynamic Behaviour in a Milling Process Using Displacement Sensors. Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations. Calabria, Italy (2007) 485-490
148. Moufki A., Devillez A., Dudzinski D., and Moulinari A. Thermomechanical Modelling of Oblique Cutting and Experimental Validation. International Journal of Machine Tools and Manufacture 44 (2004) 971-989
149. Muckelbauer M., and Böse L. Virtuelle Prozessentwicklung mit Schmiedesimulationssoftware. Schmiede-Journal 9 (2000) 36-37
150. Neugebauer R., Altan T., Geiger M., Kleiner M., and Sterzing A. Sheet Metal Forming at Elevated Temperatures. Annals of the CIRP 55 2 (2006) 793-816
151. Neugebauer R., Denkena B., and Wegener K. Mechatronic Systems for Machine Tools. Annals of the CIRP 56 2 (2007) 657-686
152. Ngaile G., and Altan T. Simulations of Manufacturing Process-Past, Present and Future. Proceedings of ICTP (2003) 271-283
153. Okuyama S., Kitajima T., and Yui A. Theoretical Study on the Effect of Form Error of Grinding Wheel Surfaces Under Free Form Grinding. Key Engineering Materials 257-258 (2004) 147-152
154. Ozturk E., and Budak E. Modelling of 5-Axis Milling Forces. Proceedings of the 8th CIRP International Workshop on Modelling of Machining Operations. Chemnitz, Germany (2005) 319-326
155. Ozturk E., Ozlu E., and Budak E. Modeling Dynamics and Stability of 5-axis Milling Processes. Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations. Calabria, Italy (2007) 469-476
156. Ozlu E., and Budak E. Analytical prediction of stability limit in turning operations. Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations. Bled, Slovenia (2006) 99-106
157. Ozlu E., Budak E., and Molinari A. Thermomechanical Modeling of Orthogonal Cutting Including the Effect of Stick-Slide Regions on the Rake Face. Proceedings of the CIRP 10th International Workshop on Modelling of Machining Operations. Calabria, Italy (2007) 59-66
158. Piendl S., and Aurich J. FEM Simulation of Chip Formation coupled with Process Dynamics. Journal of Manufacture and Engineering 220 (2006) 1597-1604
159. Polacek M. Stabilität von Werkzeugmaschinen. WB Werkstatt und Betrieb 103 (1970) 657-663
160. Popp K., Kröger M., Deichmüller M., and Denkena B. Analysis of the Machine Structure and Dynamic Response of a Tool Grinding Machine. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 299-307
161. Reeka D (1967) Über den Zusammenhang zwischen Schleifspaltgeometrie und Rundheitsfehler beim spitzenlosen Schleifen, Dissertation, RWTH Aachen University.
162. Roll K, Altan T, Tekkaya, A, Herrmann M (1999) Virtuelle Umformtechnik, Umformtechnik 2000 Plus, Bamberg, Meisenbach, pp. 255-274.
163. Roll K. Simulation der Blechumformung. Proceedings of 12th Dresdner WZM-Fachseminar. Dresden, Germany (2007) 1.1-1.14
164. Roukema J., and Altintas Y. Generalized Modeling of Drilling Vibrations, Part I. Time Domain Model of Drilling Kinematics, Dynamics and Hole Formation. International Journal of Machine Tools and Manufacture 47 9 (2007) 1455-1473
165. Roukema J., and Altintas Y. Generalized Modeling of Drilling Vibrations. Part II. Chatter Stability in Frequency Domain. International Journal of Machine Tools and Manufacture 47 9 (2007) 1474-1485
166. Rowe W., and Barash M. Computer Method for Investigating the Inherent Accuracy of Centerless Grinding. International Journal of Machine Tool Design and Research 4 (1964) 91-116
167. Rivière-Lorphèvre E., de Arizon J., Filippi E., and Dehombreux P. Cutting Forces Parameters Evaluation in Milling Using Genetic Algorithm. Proceedings of the CIRP 10th International Workshop on Modelling of Machining Operations. Calabria, Italy (2007) 237-243
168. Sakakura M., Tsukamoto S., Fujiwara T., and Inasaki I. Visual Simulation of the Grinding Process. Proceedings of IMechE, Part B: Journal of Engineering Manufacture 222 (2008) 1233-1239
169. Salje E., and Dietrich W. Analysis of Self Excited Vibrations in External Cylindrical Plunge Grinding. Annals of the CIRP 56 1 (1982) 255-258
170. Schapp L., Brecher C., and Paepenmüller F. Gekoppelte Simulation von Maschine und Prozess in der Massivumformung. Schmiede-Journal 3 (2006) 22-25
171. Schapp L., Brecher C., and Paepenmüller F. Vorstoß in neue Dimensionen - Kopplung von Umformsimulation mit nicht-linearen Pressenmodellen. Schmiede-Journal 3 (2007) 22-24
172. Schapp L (2008) Gekoppelte Simulation von Maschine und Prozess in der Massivumformung, Dissertation, RWTH Aachen University.
173. Schiefer K (1980) Theoretische und experimentelle Stabilitätsanalyse des Schleifprozesses, Dissertation, RWTH Aachen University.
174. Schermann T., Marsolek J., Schmidt C., and Fleischer J. Aspects of the Simulation of a Cutting Process with ABAQUS/Explicit Including the Interaction between the Cutting Process and the Dynamic Behaviour of the Machine Tool. Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations. Bled, Slovenia (2006) 163-170
175. Schmidt C. Level Curve Based Geometry Representation for Cutting Force Predicition. Annals of DAAAM & Proceedings of the 17th Int. DAAAM Symposium. Vienna, Austria (2006) 367-368
176. Schmoeckel D., Hielscher C., and Huber R. Metal Forming of Tubes and Sheets with Liquid and Other Flexible Media. Annals of the CIRP 48 2 (1999) 497-513
177. Schulz H., and Moriwaki T. High-Speed Machining. Annals of the CIRP 41 2 (1992) 637-643
178. Schumacher A. Optimierung mechanischer Strukturen - Grundlagen und industrielle Anwendungen (2004), Springer Verlag
179. Schütte O (2003) Analyse und Modellierung nichtlinearer Schwingungen beim Außenrundeinstechschleifen, Dissertation, University of Hannover.
180. Schwarz F. Prognose von Prozess-Struktur-Wechselwirkungen bei Werkzeugmaschinen. Newsletter 3 8 (2006) 1-3
181. Smith J., and Tobias S. The Dynamic Cutting of Metals. International Journal of Machine Tool Design and Research 1 (1961) 283-292
182. Stépán G., and Insperger T. Stability of the milling process. Periodica Polytechnica Series Mechanical Engineering 44 (2000) 47-57
183. Stépán G., Szalai R., and Insperger T. Nonlinear Dynamics of High-speed Milling Subjected to Regenerative Effect, Nonlinear Dynamics of Production Systems (2003), Wiley-VCH pp. 111-128
184. Surmann T., Weinert K., and Kalveram M. Simulation of Cutting Tool Vibrations for the Milling of Free Formed Surfaces. Proceedings of the 8th CIRP International Workshop on Modeling of Machining Operations. Chemnitz, Germany (2005) 175-182
185. Surmann T. Geometric Model of the Surface Structure Resulting from the Dynamic Milling Process. Proceedings of the 9th CIRP International Conference on Modeling of Machining Operations. Bled, Slovenia (2006) 187-192
186. Surmann T., and Enk D. Simulation of Milling Tool Vibration Trajectories Along Changing Engagement Conditions. International Journal of Machine Tools and Manufacture 47 (2007) 1442-1448
187. Surmann T., Biermann D., and Kehl G. Oscillator Model of Machine Tools for the Simulation of Self Excited Vibrations in Machining Processes. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 23-29
188. Szalai R., Mann B., and Stephan G. Period-two and Quasi-Periodic Vibrations of High-Speed Milling. Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations. Bled, Slovenia (2006) 107-114
189. Tlusty J. Analysis of the State of Research in Cutting Dynamics. Annals of the CIRP 27 2 (1978) 583-589
190. Tlusty J. High-Speed Machining. Annals of the CIRP 42 2 (1993) 733-738
191. Tönshoff H., Peters J., Inasaki I., and Paul T. Modelling and Simulation of Grinding Processes. Annals of the CIRP 41 2 (1992) 677-688
192. Tönshoff H., Karpuschewski B., and Mandrysch T. Grinding Process Achievements and their Consequences on Machine Tools-Challenges and Opportunities. Annals of the CIRP 47 2 (1998) 651-668
193. Tönshoff H., Arendt C., and Ben Amor R. Cutting of Hardened Steel. Annals of the CIRP 49 2 (2000) 547-566
194. Tönshoff H., Rehling S., and Tracht K. An Alternative Approach to Elasto-Kinematic Modelling of Machine Tool Structures. Proceedings of Sixth International Conference on Advanced Manufacturing Systems and Technology (AMST'02). Udine, Italy (2002) 215-223
195. Tunc L., Budak E., and Ozturk E. Optimization of 5-Axis Milling Processes Using Process Models. Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations. Bled, Slovenia (2006) 179-186
196. VDI-guideline 3193, Hydraulic Presses for Cold Forging and Sheet Metal Working-Measuring Instruction for Acceptance (1986), Beuth Verlag, Berlin, Germany
197. VDI-guideline 3194, Mechanical Presses for Cold Forging-Measuring Instruction for Acceptance (1989), Beuth Verlag, Berlin, Germany
198. Vormann K. Integrierte Simulation von Zerspanprozess, Werkzeug und Werkzeugmaschine. Abschlussbericht des Verbundprojektes Simulation industrieller Bearbeitungsprozesse (SindBap). Proceedings of the Final Colloquium. Aachen (2007) 7-10
199. Werner K., Klocke F., and Brinksmeier E. Modelling and Simulation of Grinding Processes. 1st European Conf. on Grinding. Aachen (2003) 8.1-8.27
200. Weck M., and Brecher C. Werkzeugmaschinen Fertigungssysteme. Messtechnische Untersuchung und Beurteilung, dynamische Stabilität. 7th edition vol. 5 (2006), Springer-VDI-Verlag, Berlin
201. Weck M., Hennes N., and Schulz A. Dynamic Behaviour of Cylindrical Traverse Grinding Processes. Annals of the CIRP 50 1 (1998) 213-216
202. Weck M., McKeown P., Bonse R., and Herbst U. Reduction and Compensation of Thermal Errors in Machine Tools. Annals of the CIRP 44 2 (1995) 589-598
203. Weck M., and Staimer D. Parallel Kinematic Machine Tool-urrent State and Future Potentials. Annals of the CIRP 51 2 (2002) 671-681
204. Weinert K., Inasaki I., Sutherland J., and Wakabayashi T. Dry Machining and Minimum Quantity Lubrication. Annals of the CIRP 53 2 (2004) 511-537
205. Weinert K., Webber O., and Peters C. On the Influence of Drilling Depth Dependent Modal Damping on Chatter Vibration in BTA Deep Hole Drilling. Annals of the CIRP 54 1 (2005) 363-366
206. Weinert K., Gradisek J., and Kalveram M. On Stability Prediction for Milling. International Machine Tools and Manufacture 45 (2005) 769-781
207. Weinert K., Surmann T., and Müller H. Modeling of Surface Structures Resulting from Vibrating Milling Tools. Production Engineering 13 2 (2006) 133-138
208. Weinert K., Blum H., Jansen T., Mohn T., and Rademacher A. Angepasste Simulationstechnik zur Analyse NC-gesteuerter Formschleifprozesse. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 101 7-8 (2006) 422-425
209. Weinert K., Blum H., Jansen T., and Rademacher A. Simulation Based Optimization of the NCShape Grinding Process with Toroid Grinding Wheels, Prod. Eng. - Research and Development vols. 1-3 (2007), Springer, Berlin pp. 245-252
210. Wienströer M (2004) Prozesssimulation der Stadienfolge beim Schmieden mittels Rückwärtssimulation, Dissertation, University of Hannover.
211. Wiemer H (2004) Stand und Möglichkeiten der Systemsimulation von mechanischen Pressmaschinen, Dissertation, TU Dresden University.
212. Witt S (2007) Integrierte Simulation von Maschine, Werkstück und spanendem Fertigungsprozess, Dissertation, RWTH Aachen University.
213. Yegenoglu K (1986) Berechnungen von Topografiekenngrößen zur Auslegung von cBN - Schleifprozessen, Dissertation, RWTH Aachen University.
214. Younis M (1972) Theoretische und praktische Untersuchung des Ratterverhaltens beim Außenrundeinstechschleifen, Dissertation, RWTH Aachen University.
215. Yoshikawa H., and Sata T. Simulated Grinding Process by Monte Carlo Method. Annals of the CIRP 16 4 (1968) 297-302
216. Yoshikawa H., and Peklenik J. Three Dimensional Simulation Techniques of the Grinding Process - II, Effects of Grinding Conditions and Wear on the Statistical Distribution of Geometrical Chip Parameters. Annals of the CIRP 18 1 (1970) 361-366
217. Zäh M (1993) Dynamisches Prozeßmodell Kreissägen, Dissertation, TU München University.
218. Zäh M., and Schwarz F. Struktur- und Regelungsdynamik der virtuellen Werkzeugmaschine, iwb. Newsletter 1 13 (2005) 1-3
219. Zäh M., and Siedl D. Mehrkörpersimulation - Schlüsseltechnologie für große Verfahrbewegungen, iwb. Newsletter 1 13 (2005) 3-5
220. Zäh M., and Siedl D. A New Method for Simulation of Machining Performance by Integrating Finite Element and Multi-Body Simulation for Machine Tools. Annals of the CIRP 56 1 (2007) 383-386
221. Zäh F., and Schwarz F. Prognose von Prozess-Struktur-Wechselwirkungen bei Werkzeugmaschinen, iwb. Newsletter 3 14 (2006) 1-3
222. Zäh M., and Schwarz F. Consideration of Tool and Workpiece Temperatures in a Modular Cutting Force Model. Proceedings of the 1st International Conference on PMI. Hannover, Germany (2008) 353-361
223. Zeppenfeld C (2005) Schnellhubschleifen von γ-Titanaluminiden, Dissertation, RWTH Aachen University.
224. Zeppenfeld C., and Nachmani Z. Mechanisms of Action in Speed Stroke Grinding of Different Workpiece Materials. Proceedings of the 2nd European Conference on Grinding (2006) 11.1-11.28
225. Zhou S (1994) A Dynamic Study of the Plunge Centerless Grinding Process and its Effects on Workpiece Out-of-roundness, Dissertation, University of Connecticut.
226. Zhou S., Gartner J., and Howels T. On the Relationship between Setup Parameters and Lobing Behavior in Centerless Grinding. Annals of the CIRP 45 1 (1996) 341-346
227. Zitt U (1999) Modellierung und Simulation von Hochleistungsschleifprozessen, Dissertation, TU Kaiserslautern University.