Manufacturing of lightweight components by metal forming

CIRP Annals - Manufacturing Technology

Volumn 52, Issue 2, 2003, Pages 521-542

  Kleiner, M ^a   Geiger, M ^b   Klaus, A ^a  

^a TU DORTMUND UNIVERSITY   (Germany)

^b UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

Author keywords

Lightweight construction; Material property; Metal forming

Indexed keywords

LIGHT WEIGHT STRUCTURES; PRODUCT DESIGN; PRODUCT DEVELOPMENT; SHELLS (STRUCTURES); STRENGTH OF MATERIALS; STRUCTURAL DESIGN; STRUCTURAL FRAMES;

LIGHTWEIGHT COMPONENTS MANUFACTURING; LIGHTWEIGHT CONSTRUCTION;

METAL FORMING;

EID: 0347720954     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)60202-9     Document Type: Article

References (142)

1. Schreckenberger, H., Laudien, G., 2000, Das Korrosionsschutzkonzept der Aluminum-Magnesium-Hybridheckklappe des VW Lupo. Proceedings Fortschritte mit Magnesium im Automobilbau, Bad Nauheim, D, 41-50.
2. Gadow, R., 2000, Ceramic matrix composites for disk brakes and their manufacturing technologies. Proceedings 7th Internat. Symp. Ceramic Materials and Components for Engines, Applications in Energy, Transportation and Environment Syst., Goslar, D, 13-19.
3. www.ulsas.org.
4. Zengen, K.-H. von, 2002, Aluminum - the light body material. Proceedings of New Advances in Body Engineering, ika Aachen, D.
5. N.N., Ultralight Steel Autobody Advanced Vehicle Concepts (ULSAB-AVC) www.ulsab-avc.org.
6. Broge, J. L., 2000, The battle of the metals. Automotive Engineering International, Vol. 108, Issue 8, 36-53.
7. www.hayes-lemmerz.com.
8. Becker, J., Fischer, G., Schemme, K., 1998, Herstellung und Eigenschaften stranggepreßter und geschmiedeter Magnesium-Bauteile. Metall, Issue 9, Hüthig, Heidelberg.
9. Carney, D., 2001, Wheel design and engineering. Automotive Engineering International, Vol. 109, Issue 9, 54-59.
10. Gusinde, A., Hoogen, M., 2003, Aluminumblechwerkstoffe, Einsatz in der Automobilherstellung. Proceedings Landshuter Leichtbaukolloquium, Landshut, D, 47-54
11. Drewes, E.-J., 2001, Innovative Halbzeuge für den Leichtbau mit Stahl. Proceedings 16. Aachener Stahlkolloquium, Aachen, D, 207-221.
12. Doege, E. et al, 2000, Ceramic components for metal forming tools. Proceedings of Ceramic Materials and Components for Engines, Goslar, D, 133-138.
13. Kwon, H. H., Chang, C. C., Bramley, A. N., 2000, Ceramic inserts for forging tools - optimizing the design. Proceedings of MATADOR conference, Manchester, GB, 367-372.
14. Wagemann, A., 1998, Werkzeuge aus Hochleistungskeramik senken Umformkräfte und erzielen höhere Standmengen. Maschinenmarkt, Würzburg, D, Vol. 104, Issue 39, 30-32.
15. Müller, O., Albers, A., Sauter, J., Allinger, P., 1999, Topology optimization of large real world structures, NAFEMS World Congress, Newport RI, USA.
16. Kammer, C., 2000, Magnesium Taschenbuch. Aluminum-Verlag, Düsseldorf, D.
17. Doege, E., Griesbach, B., Schulz-Marner, H., 1997, Adaptive Werkzeugkonzepte zur Umformung von gefügten Halbzeugen. Proc. of Leichtbau durch intelligente Blechbearbeitung, EFB-Kolloquium, Stuttgart, D.
18. Mertens, A., 2002, Thyssen Engineered Blanks. Proceedings of Leichtbau durch Innovativen Werkstoffeinsatz. Drittes Industriekolloquium, Clausthal-Zellerfeld, D.
19. Kopp, R., Hohmeier, P., Wiedner, C., 2002, Deep Drawing and Stretch Forming of Geometrically Inhomogeneous Lightweight Construction Components. Production Engineering IX/1, Annals of the German Academic Society for Production Engineering.
20. Chatti, S., Heller, B., Kleiner, M., Ridane, N., 2002, Forming and further processing of tailor rolled blanks for lightweight structures. Advanced Technology of Plasticity, Vol II, 1387-1392.
21. Ogawa, N., Shiomi, M., Osakada, K., 2002, Forming limit of magnesium alloy at elevated temperatures for precision forging. International Journal of Machine Tools & Manufacturing 42, 607-614.
22. Amino, H., Makita, K., Maki, T., 2000, Dieless NC forming process. Proceedings of SheMet, 58-65.
23. Jeswiet, J., Hagan, E., 2002, Rapid prototyping of a headlight with sheet metal. Transactions of north american manufacturing research institute, May 2002
24. Leach, D., Green, A.J., Bramley, A. N., 2001, A new incremental sheet forming process for small batch and prototype parts. Proceedings of SheMet, 211-218.
25. Jeswiet, J, 2003, STC-F paris meeting
26. Hirt, G., Bambach, M., Junk, S., 2003, Modeling of the incremental CNC sheet metal forming process. Proceedings of SheMet, to be published.
27. Hirt, G., Junk, S., Witulski, N., 2002, Incremental sheet forming, quality evaluation and process simulation. Advanced Technology of Plasticity, Vol. I, 925-930.
28. Junk, S., Hirt, G., Chouvalova, I., 2003, Forming strategies and tools in incremental sheet forming. Proceedings of SheMet, to be published.
29. DIN 9005, 1974, Gesenkschmiedestücke aus Magnesiumknetlegierungen. Grundlagen für die Konstruction, Blatt 2.
30. Kleiner, M. et al, 2002, Combined Methods for the Prediction of Dynamic Instabilities in Sheet Metal Spinning. Annals of the CIRP 51/1, 209-214.
31. Hohnhaus, J., Obermaier, G., 2002, Superplastisches Umformen mit neuem Pressentyp. In, Siegert, K. (Ed.), Neuere Entwicklungen in der Blechumformung, MAT INFO, Frankfurt, D, 251-262.
32. Kiuchi, M., Kopp, R., 2001, Mushy/Semi-solid Metal Forming Technology - Present and Future. Annals of the CIRP 51/2, 653-670.
33. Kopp, R., Neudenberger, D., Winning, G., 2001, Different concepts of thixoforging and experiments for rheological data. Journal of Metarials Processing Technology 111, 48-52.
34. Lugscheider, E. et al., 2001, Oxide PVD-Coatings for Use on Dies for Semi-Solid Metal (SSM) Forming of Steel. Advanced Engineering Materials 3, No. 12, 998-1001.
35. McGlone, D., 1997, The use of stainless steel in the automotive sector. Proceedings of the World Stainless Steel Conference, Düsseldorf, 8.1-8.6.
36. Chassagne, F. et al., 2002, Development of a Nb stabilised 15%Cr ferritic stainless steel for the hot part of automotive exhaust systems. Proceedings of the 4th European Stainless Steel Science and Market Congress, Paris, F, 36-39.
37. Krautschick, J., Harbig, P., 2000, Einsatz von Edelstahl im Automobilbau. Proceedings of Stahlblech Umformung 2000+, Blechumformung im Automobilbau, Berlin, 67-79.
38. N.N., 2001, Stainless steel railway carriages. Steel Today and Tomorrow, Issue 156, 9-10.
39. Moser, F., Mönig, M., 2001, Einsatzmöglichkeiten von Edelstahl zur Gewichtsoptimierung und Lebensdauersteigerung am Beispiel von komplexen Bauteilen. Proceedings of Fertigungsverfahren und Betriebsfestigkeit, DVM-Berichte, Vol. 128, 237-247.
40. Friesen, F., Schwarz, D,. Cunat, P.-J., 2002, Application of Stainless Steel in Vehicle Crash Structures. Proceedings Entwicklungen im Karosseriebau, VDI, Hamburg, D.
41. Friesen, F., Schwarz, D., Cunat, P.-J., 2002, Lightweight design with stainless steel. Proceedings DYNAmore LS-DYNA Forum, Bad Mergentheim, D.
42. Friebe, E. et al, 2001, Hydro mechanical deep drawing of passenger car fuel tanks. In, Siegert, K. (Ed.), Hydroforming of Tubes, Extrusions and Sheets. Vol. 2, MAT-INFO, Frankfurt, D, 193-213.
43. www.thyssenkruppsteel.com.
44. Kopp, R., Böhlke, P., Hohmeier, P., Wiedner, C,. 2002, Metal Forming of Lightweight Structures. Proceedings of the 5th International Esaform Conference on Material Forming, Krakow, POL.
45. www.flowforming.com.
46. Peddinghaus, J., Kennedy, R., 2002, Net Formed Bevel Gears. Recent Developments in Metal Forming Technology, ECR/NSM, Ohio, USA.
47. Landgrebe, D., 2002, Precision Forming and Machining. Recent Developments in Metal Forming Technology, ECR/NSM, Ohio, USA.
48. Doege, E., Bohnsack, R., 2000, Experimental studies on a precision forging process of gears. Production Engineering VII/1, Annals of the German Academic Society for Production Engineering, 17-20.
49. Immarigeon, J.-P. et al., 1995, Lightweight Materials for Aircraft Applications. Materials Characterization 35, 41-67.
50. Company information brochure, RSP Products BV, Rotterdam, NL, www.rsp-products.nl.
51. Bay, N., 1997, Cold forming of aluminum - state of the art. Journal of Materials Processing Technology 71, 76-90.
52. Soleröd, H., Jensrud, O., Pedersen, K., 2001, New development of thermomechanical processing (TMP) and high volume production aluminum wheel suspension arms. Proc. of ATTCE, Vol. 3, Manufacturing, Automotive & Transportation Technology, Barcelona, E, SAE-P, Vol. P-369, 163-169.
53. Forcellese, A., Gabrielli, F., 2000, Warm forging of aluminum alloys, a new approach for time compression of the forging sequence. International Journal of Machine Tools & Manufacture 40, 1285-1297.
54. N.N., Schmiedeteile aus Aluminum, Das Beste aus zwei Welten. Gesamtverband der deutschen Aluminumindustrie. www.aluinfo.de/246.html.
55. Vollertsen, F., Schultz, M., Geiger, M., 1996, Formability of tailroad blanks from steel and aluminum alloys. Adv. Sheet Metal Forming, Proc. of the 19th IDDRG Congress, Eger, H, 337-346.
56. Friedman, P. A., Kridli, G. T., 2000, Microstructural and mechanical investigation of aluminum tailor-welded blanks. Journal of Materials Engineering and Performance, Vol. 9, Issue 5, 541-551.
57. Vinarcik, E. J., 2002, Automotive light metal advances. Part II, Aluminum technologies for automotive applications. Light Metal Age, Vol. 60, Issue 7/8, 50-54.
58. N.N., 2002, Modified laser welding method for aluminum tailored blanks. Aluminum 78, Issue 6, 446-447.
59. Merklein, M., Geiger, M., 2002, New mterials and production technologies for innovative light-weight constructions. Journal of Materials Processing Technology. Vol. 125-126, 532-536.
60. Geiger, M., Merklein, M., 2002, Adaptive design of aluminum sheets for deep drawing processes. Production Engineering IX/1, Annals of the German Academic Society for Production Engineering, 59-62.
61. Hofmann, A., Pohl, Th., Geiger, M. 1999, Deep drawing of locally optimized aluminum blanks. Advanced Tehnology of Plasticity, Vol II, 1043-1050.
62. Groche P., Dörr, J., Huber, R., Keller, S., 2002, Formability of aluminum-alloys in warm forming processes. Proceedings of AluForm Congress, Paris, F. www.aluform-congress.com
63. Novotny, S., Celeghini, M., Geiger, M., 2000, Measurement of material properties of aluminum sheet alloys at elevated temperatures. Proceedings of SheMet, 363-370.
64. Groche, P., Huber, R., Dörr, J., Schmoeckel, D., 2002, Hydro mechanical Deep-Drawing of Aluminum-Alloys at Elevated Temperatures. Anals of the CIRP 51/1, 215-218.
65. www.superform.com.
66. Benedyk, J. C., 2002, Superplastic forming of automotive parts from aluminum sheet at reduced cycle times. Light Metal Age, Vol 60, Issue 5/6, 28-31.
67. Siegert, K., Vulcan, M., 2001, Superplastiche Umformung von Aluminum-Blechen mit nachfolgendem hydromechanischem Tiefziehen. Proceedings 8th Sächsische Fachtagung Umformtechnik, Freiberg, D, 255-271.
68. Vulcan, M., 2001, Superplastic Forming of Sheet Metals. Second Global Symposium on Innovations in Materials Process & Manufacturing. TMS, New Orleans, USA.
69. Vulcan, M., Siegert, K., Banabic, D., 2002, Superplastic forming of aluminum, Proceedings Neuere Entwicklung in der Blechumformung, Fellbach, D, 411-429.
70. Davies, R., W., Vetrano, J. S., Smith, M. T., Pitman, S. G., 2002, Mechanical properties of aluminum tailor welded blanks at superplastic temperatures. Journal of Materials Processing Technology, Vol. 128, 38-47.
71. Friedrich, H., Schumann, S., 2000, The second age of Magnesium research strategies to bring the automotive industry's vision to reality. Proceedings Magnesim 2000, Dead Sea, Israel.
72. Doege, E., Sebastian, W., Dröder, K., Kurz, G., 2001, Increased Formability of Mg-Sheets using Temperature Controlled Deep Drawing Tools, in Innovations in Processing and Manufacturing of Sheet Materials, TMS Annual Meeting, 53-60.
73. Mordike, B.L., von Buch, F., 2000, Development of high temperature creep resistant alloys. In, Kainer, K. U. (Ed.), Magnesium Alloys and their Applications, Wiley-VCH, D, 35-40.
74. Jaschik, C. Haferkamp, H., Niemeyer, M., 2000, New magnesium wrought alloys, In, Kainer, K. U. (Ed.), Magnesium Alloys and their Applications, Wiley-VCH, D, 41-46.
75. Closset, B., 2000, Mechanical properties of extruded magnesium alloys. In, Kainer, K. U. (Ed.), Magnesium Alloys and their Applications, Wiley-VCH, D, 274-279.
76. Doege, E., Kurz, G., 2001, Development of a Formulation to Describe the Work Softening Behavior of Magnesium Sheets for Heated Deep Drawing Processes. Annals of the CIRP 50/1, 177-180.
77. Chabbi, L., Lehnert, W., Kawalla, R., Lehnert, F., 2000, Hot and cold forming behavior of magnesium alloys AZ31 and AX61. In, Kainer, K. U. (Ed.), Magnesium Alloys and their Applications, Wiley-VCH, D, 621-627.
78. Doege, E., Janssen, S., 2001, Recording flow curves of magnesium wrought alloys Production Engineering VIII/2, Annals of the German Academic Society for Production Engineering, 9-12.
79. Juchmann, P., Wolff, S., Kurz, G., 2002, Magnesiumblech - Werkstoffalternative für den Ultraleichtbau. In, Doege, E. (Ed.), Umformtechnik - Erschließung wirtschaftlicher und technolgischer Potenziale 17. Umformtechnisches Kolloquium, Hannover, D, 179-192.
80. Matsumoto, R., Osakada, K., 2002, Lubrication and Friction of Magnesium Alloys in Warm Forging. Annals of the CIRP 51/1, 223-233.
81. Juchmann, P., Wolff, S., 2002, Magnesiumblech - neuer Ultraleichtbauwerkstoff aus Niedersachsen. Congress Intelligente Leichtbau Systeme, Hannover, www.nmn-ev.de/ILS2002.
82. Schemme, K.-J. 2000, Magnesium motorcycle wheels for racing applications. In, Kainer, K. U. (Ed.), Magnesium Alloys and their Applications Wiley-VCH, D, 391-396.
83. Wagener, H.-W., Lehnert, F., 2000, Deep drawing of magnesium sheet metal at room temperature. In, Kainer, K. U. (Ed.), Magnesium Alloys and their Applications, Wiley-VCH, D, 615-620.
84. www.dymag.com.
85. Meiner, F., Vogt, O., 2003, Titan hebt ab. Phi - Produktionstechnik Hannover informiert, Issue 1, 12-13.
86. www.motograndprix.de.
87. N.N., Strangpressprodukte, Schmiedestücke. Aluminum, Titan, Magnesium, Messing. Lieferübersicht Otto Fuchs Metallwerke GmbH, Meinerzhagen, D.
88. PVM Vetterolf GmbH, Mannheim, D.
89. Beck, W., Hallfeldt, T., 1999, Umformung von Titanblechwerkstoffen. Blech, Rohre, Profile Vol. 46, Issue 6, 38-42.
90. Salishchev, G. et al., 2002, Enhanced superplastic forming of Ti-6Al-4V. Proceedings of TMS 2002, Seattle, USA, 85-92.
91. Beck, W., Hallfeldt, T., 1999, Umformung von Titanblechwerkstoffen. Proceedings of Umformtechnisches Kolloquium, Hannover, D, 235-244.
92. Lutfullin, R. Y., Kruglov, A. A., Kaibyshev, O. A., 2001, Superplastic forming of spherical vessels. Proceedings of Materials week 2001, advanced materials, their processes and applications, Munich, 1-6
93. Vinarcik, E. J., 2002, Automotive light metal advances. Part I, Innovative designs and emerging technology. Light Metal Age, Vol. 60, Issue 5/6, 38-41.
94. Doege, E., Kulp, S., 2001, Evaluation of cp-Ti sheet for deep drawing processes. Proceedings of Materials week 2001, advanced materials, their processes and applications, Munich, D.
95. Doege, E., Kulp, S., Schauerte, O., 2001, Cp-Ti sheet material and its application in deep drawing processes. Proceedings from Processing and Fabrication of Advanced Materials, Indiana, USA.
96. Doege, E., Kulp, S., Poesse, O., 2002, Properties and application of titanium alloys in sheet metal forming. Advanced Technology of Plasticity, Vol II, 1207-1212.
97. Alberti, N., Forcellese, A., Fratini, L., Gabrielli, F., 1998, Sheet Metal Forming of Titanium Blanks Using Flexible Media. Annals of the CIRP 47/1, 217-220.
98. N.N., Leicht und doch stabil, Intelligente Leichtbaukonzepte mit Aluminumrohren. Gesamtverband der deutschen Aluminumindustrie. www.aluinfo.de/249.html.
99. Mayer, H., Venier, F., Koglin, K., 2002, Die ASF-Karosserie des Audi A8. The new Audi A8 - special edition of ATZ/MTZ, 94-108.`
100. Schumann, S., Friedrich, H., 2003, Current and future use of magnesium in the automobile industry. Proceedings of Magnesium Alloys 2002, Osaka, Japan, Vol. 1, 51-56.
101. Langerak, N., Kragtwijk, S., 1998, The application of steel and aluminum in a new lightweight car body design. Proceedings international body engineering conference (IBEC), Detroit MI, USA, Society of Automotive Engineers (SAE)
102. Schaik, M. van, Kagi B., 1999, SOUTUBE, a new way of tube manufacturing. Tube international Vol. 18 Nr. 96, Oxted, Surrey, 181-183.
103. Langerak, N. Kragtwijk, S., 1998, Lightweight car body design. Automotive Engineering International 10/1998, 106-110, Society of Automotive Engineers (SAE).
104. Kneiphoff, U., Gerlach, J., Flehmig, T., 2001, Dünnwandige Tailored Tubes für Karosseriestrukturen - Herstellung, Prüfung und Anwendungen. Stahl-Symposium Düsseldorf, D.
105. Neugebauer R. et al, 2002, Application of the parallel kinematic machine principle in a new hydraulic powered, flexible bending machine for tubes and profiles. PKS 2002, 3rd Chemnitz Parallel Kinematics Seminar, Chemnitz, D, 629-638.
106. Arnet, H., 1999, Section bending with kinematic shaping. Advanced Technology of Plasticity, Vol. 3, 2349-2354.
107. Geiger, M., Sprenger, A., 1998, Controlled Bending of Aluminum Extrusions, Annals of the CIRP 47/1, 197-202
108. Kleiner, M., 1999, Method and Device for the Production of Curved Workpieces, European patent specification EP 0 706 843 B1
109. Klaus, A.; Arendes, D.; Chatti, S.; Kleiner, M., 2000, Direct Rounding of Profiles During Extrusion, Proceedings of the 7th International Aluminum Extrusion Technology Seminar, Chicago, USA, Volume 2, p. 415-420
110. Klaus, A., Chatti, S., Kleiner, M., 2001, Advanced Manufacturing of Curved Profiles for Hydroforming. Light Metal Age, April, 66-69.
111. Klaus, A., 2002, Verbesserung der Fertigungsgenauigkeit und der Prozessicherheit des Rundens beim Strangpressen, PhD-thesis, Dortmund University
112. Klaus, A., Birkenstock, A., 2002, High precision extrusion of curved profiles for structural application, Aluminum 2002 conference and trade fair, Essen, D
113. Takahashi, H., Oishi, Y., Wakamatsu, K., Kawabe, N., 2003, Tensile properties and bending formability of drawn magnesium alloy pipes. Proceedings of Magnesium Alloys 2003, Osaka, Japan, Vol. 1, 345-348.
114. Hein, P., Geiger, M., 1999, Advanced process control strategies for the hydroforming of sheet metal pairs. Advanced Technology of Plasticity, Vol II, 1267-1272.
115. Flegel, A., 2002, Geschlossene Prozessketten vom Halbzeug zum Bauteil aus der Sicht des Automobilherstellers. In, Siegert, K. (Ed.), Neuere Entwicklungen in der Blechumformung, MAT INFO, Frankfurt, 217-235.
116. www.ulsab.org.
117. Wesemann, J., 1999, Aluminumkonzepte für den Automobilbau. Proceedings Euroforum-conference, Frankfurt, D.
118. Ruch, W., Zengen, K.-H. von, Possehn, T., 2000, Großserienfertigung von Aluminumkarosserien. In, Siegert, K. (Ed.), Neuere Entwicklungen in der Blechumformung, MAT INFO Frankfurt, 315-330.
119. Rohleder, M. W., 2001, Simulation rückfederungsbedingter Formabweichungen im Produktentstehungsprozess on Blechformteilen. PhD-thesis, Dortmund University.
120. Pirchner, H., Weber, M., Kawalla, R., 2002, Magnesiumbleche für den Karosseriebau. In, Siegert, K. (Ed.), Neuere Entwicklungen in der Blechumformung, MAT INFO, Frankfurt, 251-262.
121. www.corusgroup-hylite.com.
122. www.vda.de
123. Seeliger, H.-W. 2002, Herstellung und Fertigung von Aluminumschaum-Sandwichteilen (Aluminum Foam Sandwich, AFS). In, Siegert, K. (Ed.), Neuere Entwicklungen in der Blechumformung MAT INFO, Frankfurt, 347-364.
124. Homberg, W., 2000, Untersuchungen zur Prozessführung und zum Fertigungssystem bei der Hochdruck-Blech-Umformung. PhD-thesis, Dortmund University
125. Beck S. Siegert, K., 2001, Deep Drawing with Segment-Elastic Binders. Production Engineering 2/2001, Annals of the German Academic Society for Production Engineering.
126. Weinmann, K. J., Rui, L., 1999, The effect of active drawbeads on depth of draw in the forming of aluminum panels. Advanced Technology of Plasticity, Vol. 3, 2031-2038
127. Schmoeckel, D., Hielscher, C., Huber, R., Geiger, M., 1999, Metal forming of tubes and sheets with liquid and other flexible media. Annals of the CIRP 48/2, 497-513.
128. Kleiner, M. Gartzke, A., Kolleck, R., 1997, Experimental and finite element analysis of capabilities and limits of a combined pneumatic and mechanical deep drawing process. Annals of the CIRP 46/1
129. Siegert, K., Aust, M., 2000, Hydromechanical Deep-Drawing. Production Engineering VII/2, Annals of the German Academic Society for Production Engineering, 7-12.
130. Kleiner, M., Homberg, W., Brosius, A., 1999, Processes and Control of Sheet Metal Hydroforming. Advanced Technology of Plasticity, Vol. 2, 1243-1252.
131. Hahn, O., Bangel, M., 2002, Clinchen von Stahl und Aluminum in Hybridbauweise. UTF science III/2002, 21-24, Meisenbach, Bamberg.
132. Kallee, S. W., Thomas, W. M., Nicholas, E. D., 2000, Friction stir welding of lightweight materials. In, Kainer, K. U. (Ed.), Magnesium Alloys and their Applications, Wiley-VCH, D, 175-190.
133. Johnson, R., 2003, Friction stir welding of magnesium alloys. Proceedings of Magnesium Alloys 2003, Osaka, Japan, Vol 1, 365-370
134. www.eurostir.co.uk.
135. Cai, H., Bewick, M., 2002, Design and development of light weight Al spindle. Proceedings of the SAE 2002 World Congress, Designing and Achieving Lightweight Vehicles, Detroit, USA, Vol. 1684, 91-95.
136. www.visteon.com/technology/automotive/spindle.shtml.
137. Beerwald, C. et al., 1999, New Aspects of Electromagnetic Forming. Advanced Technology of Plasticity, Vol. 3, 2471-2476.
138. Beerwald, C., Brosius, A., Kleiner, M., 2000, Determination of flow stress at very high strain rates by a combination of magnetic forming and FEM calculation. International Workshop on Friction and Flow Stres in Cutting and Forming, Paris, F, 175-182.
139. Sweeney, K., 2002, Electromagnetic Joning of Al Structures. Recent Developments in Metal Forming Technology ECR/NSM, Ohio, USA.
140. Merklein, M., Kerausch, M., Hussnaetter, W., Geiger, M., 2002, Enlargement of deep drawability of aluminium blanks. Advanced Technology of Plasticity, Vol. 2, 1153-1158.
141. Novotny, S., 2002, Innenhochdruck-Umformen von Blechen aus Aluminium- und Magnesiumlegierungen bei erhöhter Temperatur, PhD-thesis, Erlangen University.
142. Nock, M. Geiger, M., 2002, Flexible kinematic 3D-bending of tubes and profiles. Advanced Technology of Plasticity, Vol. 1, 643-648.