Synthesis of palladium with different nanoscale structures by sputtering deposition onto fiber templates

Journal of Nanophotonics

Volumn 2, Issue 1, 2008, Pages

  Pantojas, Victor M ^a   Rodríguez, Diego ^b   Morell, Gerardo ^b,d   Rivera, Adamari ^a   Ortiz, Carlos ^a   Santiago Avilés, Jorge J ^c   Otaño, Wilfredo ^a,d  

^a UNIVERSITY OF PUERTO RICO AT CAYEY   (Puerto Rico)

^b UNIVERSITY OF PUERTO RICO RIO PIEDRAS   (Puerto Rico)

^c UNIVERSITY OF PENNSYLVANIA   (United States)

^d UNIVERSITY OF PUERTO RICO   (Puerto Rico)

Author keywords

Crystalline structures; Electrospinning; Morphological structures; Nanoscale morphology; Sputtering

Indexed keywords

CRYSTALLINE MATERIALS; CRYSTALLINITY; ELECTROSPINNING; HEAT TREATMENT; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; MATHEMATICAL MORPHOLOGY; NANOTECHNOLOGY; PALLADIUM COMPOUNDS;

CRYSTALLINE STRUCTURE; ELECTROSPINNING TECHNIQUES; LINE-OF-SIGHT DEPOSITION; MATHEMATICAL SIMULATIONS; MORPHOLOGICAL STRUCTURES; NANOSCALE MORPHOLOGY; TRANSMISSION ELECTRON MICROSCOPY IMAGES; X-RAY DIFFRACTION STUDIES;

SPUTTERING;

EID: 70350168822     PISSN: None     EISSN: 19342608     Source Type: Journal    
DOI: 10.1117/1.3040687     Document Type: Article

References (34)

1. B. A. Movchan and A. V. Demchishin, "Study of the structure and properties of thick vacuum condensates of nickel, titanium, tungsten, aluminum oxide, and zirconium dioxide," Phys. Met. Metallogr. 28, 83-90 (1969).
2. J. A. Thorton, "Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings," Ann. Rev. Mater. Sci. 7, 239-260 (1977) [doi:10.1146/annurev.ms.07.080177. 001323].
3. R. Messier, A. P. Giri, and R. A. Roy, "Revised structure zone model for thin film physical structure," J. Vac. Sci. Technol. A 2(2), 500-503 (1984) [doi:10.1116/1.572604].
4. R. Messier, "Toward quantification of thin film morphology," J. Vac. Sci. Technol. A 4(3), 490-495 (1986) [doi:10.1116/1.573866].
5. R. Messier and J. E. Yehoda, "Geometry of thin-film morphology," J. Appl. Phys. 58, 3739-3746 (1985) [doi:10.1063/1.335639].
6. R. Messier, T. Gehrke, C. Frankel, V.C. Venugopal, W. Otaño, and A. Lakhtakia, "Engineered sculptured nematic thin films," J. Vac. Sci. Technol. A 15(4), 2148-2152 (1997) [doi:10.1116/1.580621].
7. A. Rodriguez-Navarro, W. Otaño-Rivera, J. M. García-Ruiz, R. Messier, and L. J. Pilione, "Preparation of highly oriented polycrystalline AlN thin films deposited on glass at oblique-angle incidence," J. Mater. Res. 12(7), 1689-1692 (1997) [doi:10.1557/JMR.1997. 0232]. (Pubitemid 127561413)
8. R. Messier, V. C. Venugopal, and P. D. Sunal, "Origin and evolution of sculptured thin films," J. Vac. Sci. Technol. A 18, 1538-1545 (2000) [doi:10.1116/1.582381].
9. A. Lakhtakia and R. Messier, Sculptured Thin Films: Nanoengineered Morphology and Optics, SPIE Press, Bellingham, WA (2005).
10. Morphology, in Merrian-Webster Dictionary online, Retrieved from http://www.merriam-webster.com/ (August, 2008).
11. F. C. Frank, "Foreword," in Morphology of Crystals, Ichiro Sunagawa, Ed., Terra Scientific, Tokyo (1987).
12. S. Niwa, M. Eswarmoorthy, J. Nair, S. Raj, N. Itoh, H. Shoji, T. Nomba, and F. Mizukami, "A one-step conversion of benzene to phenol with a palladium membrane," Science 295, 105-107 (2002) [doi:10.1126/science. 1066527]. (Pubitemid 34052354)
13. S. W. Kim, M. Kim, W. Y. Lee, and T. J. Hyeon, "Fabrication of hollow palladium spheres and their successful application to the recyclable heterogeneous catalyst for Suzuki coupling reactions," J. Am. Chem. Soc. 124, 7642-7643 (2002)[doi:10.1021/ja026032z]. (Pubitemid 34733762)
14. H. Wipf, Hydrogen in Metals III, Springer, Berlin (1997) [doi: 10.1007/BFb0103398].
15. F. Favier, E. C. Walter, M. P. Zach, T. Benter, and R. M. Penner, "Hydrogen sensors and switches from electrodeposited palladium mesowire arrays," Science 293, 2227-2231 (2001) [doi:10.1126/science.1063189]. (Pubitemid 32900226)
16. E. C. Walter, F. Favier, and R. M. Penner, "Hydrogen sensors and switches from electrodeposited palladium mesowire arrays," Anal. Chem. 74, 1546-1553 (2002) [doi:10.1021/ac0110449]. (Pubitemid 34297589)
17. Z. Shi, S. Wu, and J. A. Szpunar, "Synthesis of palladium nanostructures by spontaneous electroless deposition," Chem. Phys. Lett. 422, 147-151 (2006) [doi:10.1016/j.cplett.2006.02.065]. (Pubitemid 43675701)
18. M. Z. Atashbar, V. Bliznyuk, D. Banerji, and S. Singamaneni, "Deposition of parallel arrays of palladium nanowires on highly oriented pyrolitic graphite," J. All. Comp. 372, 107-110 (2004) [doi:10.1016/j. jallcom.2003.10.014].
19. C. L. Tien, H. W. Chen, W. F. Liu, S. S. Jyu, S. W. Lin, and Y. S. Lin, "Hydrogen sensor based on side-polished fiber Bragg gratings coated with thin palladium film," Thin Sol. Films 516, 5360-5363 (2008) [doi:10.1016/j.tsf.2007.07.045].
20. J. W. Elam, A. Zinivev, C. Y. Han, H. H. Wang, U. Welp, J. N. Hryn, and M. J. Pellin, "Atomic layer deposition of palladium films on Al2O3 surfaces," Thin Sol. Films 515, 1664-1673 (2006) [doi:10.1016/j.tsf.2006. 05.049]. (Pubitemid 44716115)
21. F. A. Lewis, The Palladium Hydrogen System, Academic Press, New York (1967).
22. M. Steinhart, Z. Jia, A. K. Schaper, R. B. Wehrspohn, U. Gosele, and J. H. Wendorff, "Palladium nanotubes with tailored wall morphologies," Adv. Mater. 15, 706-709 (2003) [doi:10.1002/adma.200304502].
23. W. D. Westwood, Sputter Deposition, Am. Vacuum Soc. Education Committee Book Series, New York (2003).
24. T. Unagami, A. Lousa, and R. Messier, "Silicon thin film with columnar structure formed by rf diode sputtering," Jpn. J. Appl. Phys. 36, L737-L739 (1997) [doi:10.1143/JJAP.36.L737].
25. D. A. Czaplewski, S. S. Verbridge, and H. G. Craighead, "Nanomechanical oscillators fabricated using polymeric nanofiber templates," Nano Lett. 4, 437-439 (2004) [doi:10.1021/nl035149y]. (Pubitemid 38402629)
26. O. Sánchez, M. Hernández-Vélez, D. Navas, M. A. Auger, J. L. Baldonedo, R. Sanz, K. R. Pirota, and M. Vázquez, "Functional nanostructured titanium nitride films obtained by sputtering magnetron," Thin Sol. Films 495, 149-153 (2006) [doi:10.1016/j.tsf.2005.08. 203]. (Pubitemid 41689903)
27. M. Feng and R. J. Puddephatt, "Chemical vapor deposition of macroporous platinum and palladium-platinum alloy films by using polystyrene spheres as templates," Chem. Mater. 15, 2696-2698 (2003) [doi:10.1021/cm034170x].
28. M. Bognitzki, Z. Jia, A. K. Schaper, R. B. Wehrspohn, U. Gösele, and J. H. Wendorff, "Polymer, metal, and hybrid nano- and mesotubes by coating degradable polymer template fibers (TUFT process)," Adv. Mater. 12, 637-640 (2000)[doi:10.1002/(SICI)1521- 4095(200005)12:9〈637:: AIDADMA637〉3.0.CO;2-W].
29. Y. Lu, G. L. Liu, J. Kim, Y. X. Mejia, and L. P. Lee, "Nanophotonic crescent moon structures with sharp edge for ultrasensitive biomolecular detection by local electromagnetic field enhancement," Nano Lett. 5, 119-124 (2005) [doi:10.1021/nl048232+]. (Pubitemid 40168914)
30. D. Li and Y. Xia, "Electrospinning of nanofibers: reinventing the wheel?," Adv. Mater. 16, 1151-1170 (2004) [doi:10.1002/adma.200400719].
31. W. Otaño, A. Otero, J. M. Otaño, C. S. Otaño, J. J. Santiago, and V. M. Pantojas, "Formation of palladium structures combining electrospinning and dc sputtering," Mater. Res. Soc. Symp. Proc. 948E, 0948-B05-12 (2007).
32. Y. Wang, M. Aponte, N. Leon, I. Ramos, R. Furlan, S. Evoy, and J. J. Santiago, "Synthesis and characterization of tin oxide microfibres electrospun from simple precursor solution," Semicond. Sci. Technol. 19, 1057-1060 (2004) [doi:10.1088/0268-1242/19/8/017].
33. Joint Committee on Powder Diffraction Studies (JCPDS) card No. 46-1043.
34. R. J. Gnaedinger, "Some calculations of thickness distribution of films deposited from large area sputtering sources," J. Vac. Sci. Technol. 6, 355-362 (1969) [doi:10.1116/1.1492693].