Crack formation, exfoliation, and ridge formation in 500 °C annealed sol-gel silica coatings on stainless steel SUS304: Part II Spectroscopic and mechanical analyses and insights into mechanisms controlling coating characteristics

Ceramics International

Volumn 35, Issue 5, 2009, Pages 1747-1755

  Takemori, Makoto ^a  

^a NATIONAL INSTITUTE OF ADVANCED INDUSTRIAL SCIENCE AND TECHNOLOGY AIST   (Japan)

Author keywords

A. Films; A. Sol gel processes; B. Interfaces; D. SiO2

Indexed keywords

A. FILMS; A. SOL-GEL PROCESSES; B. INTERFACES; COATING CHARACTERISTICS; CRACK FORMATIONS; D. SIO2; FOURIER TRANSFORM INFRA-RED SPECTROSCOPIES; MECHANICAL ANALYSIS; MECHANISMS OF FORMATIONS; MICROSCOPIC OBSERVATIONS; MILD OXIDATIONS; NANO INDENTATIONS; NON-AQUEOUS; SILICA COATINGS; SOL-GEL SILICAS; X- RAY DIFFRACTIONS; X-RAY PHOTOELECTRON SPECTROSCOPIES;

AUGER ELECTRON SPECTROSCOPY; COATINGS; CRACK DETECTION; CRACK INITIATION; FOURIER TRANSFORM INFRARED SPECTROSCOPY; FOURIER TRANSFORMS; GELATION; GELS; MECHANISMS; NANOINDENTATION; NANOSTRUCTURED MATERIALS; SILICA; SOL-GEL PROCESS; SOL-GELS; SOLS; SPECTROSCOPIC ANALYSIS; SPECTRUM ANALYSIS; STEEL METALLURGY; X RAY PHOTOELECTRON SPECTROSCOPY;

STAINLESS STEEL;

EID: 67349168674     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2008.09.015     Document Type: Article

References (59)

1. Takemori M. Low temperature synthesis of a silica-based glass-like adherent film by a sol-gel method. J. Mater. Sci. Lett. 20 (2001) 151-154
2. Nakaue A., and Kawakami N. Evaluation of the mechanical properties of thin films using nanoindentation. R-D Kobe Steel Eng. Rep. 52 2 (2002) 74-77 (in Japanese)
3. Instruction manual of FT-IR-ATR JASCO Corp. (in Japanese).
4. Ishitani A., Shoda K., Ishida H., Watanabe T., Yoshida K., and Iwaki M. Characterization of oxygen-implanted polyethylene by various analytical techniques. Nucl. Instr. Meth. Phys. Sec. B 39 1-4 (1989) 783-786
5. Vasconcelos D.C.L., Carvalho J.A.N., Mantel M., and Vasconcelos W.L. Corrosion resistance of stainless steel coated with sol-gel silica. J. Non-Cryst. Solid 273 1-3 (2000) 135-139
6. Brinker C.J., and Scherer G.W. Sol-Gel Science (1990), Academic Press, San Diego (Chapter 13)
7. Brinker C.J., and Scherer G.W. Sol-Gel Science (1990), Academic Press, San Diego (Chapter 9)
8. 2O vapor. Jpn. J. Appl. Phys. 37 (1998) L1452-L1454
9. Innocenzi P. Infrared spectroscopy of sol-gel derived silica-based films: a spectra-microstructure overview. J. Non-Cryst. Solid 316 2-3 (2003) 309-319
10. Lucovsky G., Manitini M.J., Srivastava J.K., and Irene E.A. Low-temperature growth of silicon dioxide films: a study of chemical bonding by ellipsometry and infrared spectroscopy. J. Vac. Sci. Technol. B 5 2 (1987) 530-537
11. 2 films. J. Non-Cryst. Solid 110 2-3 (1989) 163-169
12. Agarwal A., Tomozawa M., and Lanford W.A. Effect of stress on water diffusion in silica glass at various temperatures. J. Non-Cryst. Solid 167 1-2 (1994) 139-148
13. Mukherjee S.P., Suryanarayana D., and Strope D.H. Sol-gel processing in electronic packaging materials. J. Non-Cryst. Solid 147 148 (1992) 783-791
14. Haanappel V.A.C., Rem J.B., van Corbach H.D., Fransen T., and Gellings P.J. Properties of alumina films prepared by metal-organic chemical vapour deposition at atmospheric pressure in the presence of small amounts of water. Surf. Coat. Technol. 72 1-2 (1995) 1-12
15. Ghemid S., Monteil A., and Guichaoua D. Orientation of silica rings under uniaxial stress in simulated vitreous silica. Comput. Mater. Sci. 39 3 (2007) 552-556
16. Henrist C., Rulmont A., and Cloots R. Synthesis and characterization of inorganic, lamellar nanofillers with high aspect ratio. J. Eur. Ceram. Soc. 27 2-3 (2007) 1023-1027
17. Ebina T. Nendo wo shuseibun to suru tainetsusei gasubariamaku no kaihatsu. Sansouken TODAY 7 10 (2007) 18. (in Japanese)
18. Chou Y.-S., Stevenson J.W., and Singh P. Thermal cycle stability of a novel glass-mica composite seal for solid oxide fuel cells: effect of glass volume fraction and stresses. J. Power Sources 152 (2005) 168-174
19. 3-δ Part 3. Defect-chemistry-based modeling. Solid State Ionics 167 3-4 (2004) 255-262
20. Yeon D.-H., Cha P.-R., and Grant M. Phase field model of stress-induced surface instabilities: surface diffusion. Acta Mater. 54 6 (2006) 1623-1630
21. Tallant D.R., Michalske T.A., and Smith W.L. The effects of tensile stress on the Raman spectrum of silica glass. J. Non-Cryst. Solid 106 1-3 (1988) 380-383
22. de Sanctis O., Gómez L., Pellegri N., Parodi C., Marajofsky A., and Durán A. Protective glass coatings on metallic substrates. J. Non-Cryst. Solid 121 1-3 (1990) 338-343
23. Iwamori S., Gotoh Y., and Moorthi K. Silicon oxide gas barrier films deposited by reactive sputtering. Surf. Coat. Technol. 166 1 (2003) 24-30
24. x/Si(1 1 1) supports. J. Electron Spectr. Rel. Phenom. 62 4 (1993) 335-349
25. Swart H.C., and Berning G.L.P. The effect of oxygen on the formation of iron silicide. Appl. Surf. Sci. 78 1 (1994) 77-82
26. Hoffman Jr. R.W., Mitchell T.E., and Hoffman R.W. The structure-mechanical property relationship of amorphous silicon monoxide thin films. Thin Solid Films 154 1-2 (1987) 149-157
27. Hones P., Diserens M., and Lévy F. Characterization of sputter-deposited chromium oxide thin films. Surf. Coat. Technol. 120 121 (1999) 277-283
28. Matsuno S. Effect of Cr content on high temperature corrosion resistance of Fe-Cr alloy. Kurimoto Gihou 47 (2002) 8-11 (in Japanese)
29. 2: a review. J. Non-Cryst. Solid 354 2-9 (2008) 224-232
30. Aylward W.M., and Pickup P.G. Ion-exchange and ion-transport in silica and sulphonated-silica (ormosil) hydrogels. Electrochim. Acta 53 11 (2008) 3897-3902
31. Herz K., Kessler F., Wächter R., Powalla M., Schneider J., Schulz A., and Schumacher U. Dielectric barriers for flexible CIGS solar modules. Thin Solid Films 403 404 (2002) 384-389
32. 2 nanocomposites. J. Non-Cryst. Solid 318 1-2 (2003) 37-42
33. Uedono A.Z., Chen Q., Suzuki R., Ohdaira T., Mikado T., Fukui S., Shiota A., and Kimura S. Nanoporous structure of methyl-silsesquioxane films using monoenergetic positron beams. J. Appl. Phys. 90 5 (2001) 2498-2503
34. Yae Kina A., Souza V.M., Tavares S.S.M., Pardal J.M., and Souza J.A. Microstructure and intergranular corrosion resistance evaluation of AISI 304 steel for high temperature service. Mater. Char. 59 5 (2008) 651-655
35. Ortner S.R. A stem study of the effect of precipitation on grain boundary chemistry in AISI 304 steel. Acta Metall. Mater. 39 3 (1991) 341-350
36. Wu Y.C., and Jean Y.C. Hydrogen damage in AISI 304 stainless steel studied by Doppler broadening. Appl. Surf. Sci. 252 9 (2006) 3278-3284
37. x: H thin films prepared by thermal evaporation of SiO powder. J. Luminescence 80 1-4 (1998) 445-448
38. Hänni W., Hintermann H.E., Morel D., and Simmen A. Silica coatings on strongly passivated substrates. Surf. Coat. Technol. 36 1-3 (1988) 463-470
39. Anas M., Bellouard C., Moreau L., and Vergnat M. Magnetic and transport properties of annealed Fe(SiO) alloys. J. Magn. Magn. Mater. 284 (2004) 165-171
40. Pérez F.J., Otero E., Hierro M.P., Gómez C., Pedraza F., de Segovia J.L., and Román E. High temperature corrosion protection of austenitic AISI 304 stainless steel by Si, Mo and Ce ion implantation. Surf. Coat. Tehnol. 108-109 1-3 (1998) 127-131
41. Ono S., and Nishi Y. Chromium-free corrosion resistance of metals by ceramic coating. J. Am. Ceram. Soc. 84 12 (2001) 3054-3056
42. Pepe A., Galliano P., Ceré S., Aparicio M., and Durán A. Hybrid silica sol-gel coatings on Austempered Ductile Iron (ADI). Mater. Lett. 59 17 (2005) 2219-2222
43. Bauer F., Decker U., Dierdorf A., Ernst H., Heller R., Liebe H., and Mehnert R. Preparation of moisture curable polysilazane coatings Part I. Elucidation of low temperature curing kinetics by FT-IR spectroscopy. Prog. Org. Coat. 53 3 (2005) 183-190
44. Riffard F., Buscail H., Caudron E., Cueff R., Issartel C., and Perrier S. In-situ characterization of the oxide scale formed on yttrium-coated 304 stainless steel at 1000 °C. Mater. Char. 49 1 (2002) 55-65
45. x nanocomposite thin films prepared by ion-assisted plasma-enhanced chemical vapor deposition. Thin Solid Films 280 1-2 (1996) 204-210
46. Miyata H., Noma T., Watanabe M., and Kuroda K. Preparation of mesoporous silica films with fully aligned large mesochannels using nonionic surfactants. Chem. Mater. 14 (2002) 766-772
47. Littlejohns J.V., and Daugulis A.J. Oxygen transfer in a gas-liquid system containing solids of varying oxygen affinity. Chem. Eng. J. 129 1-3 (2007) 67-74
48. Izumi K., Tanaka H., Uchida Y., Tohge N., and Minami T. Influence of firing conditions on adhesion of methyltrialkoxysilane-derived coatings on steel sheets. J. Non-Cryst. Solid 147 148 (1992) 483-487
49. Japan Patent L2003009732.
50. 2 films deposited on silicon at low temperatures by plasma enhanced decomposition of hexamethyldisilazane. J. Non-Cryst. Solid 245 1-3 (1999) 20-26
51. Website: http://www.infocean.net/qgc/tokusei2.html (accessed Nov. 2007, in Japanese).
52. 2 prepared by sol-gel processing. J. Non-Cryst. Solid 265 1-2 (2000) 61-67
53. 2 thin films deposited by a new sol-gel technique. J. Non-Cryst. Solid 147 148 (1992) 488-492
54. Carn F., Colin A., Schmitt V., Calderon F.L., and Backov R. Soft matter, sol-gel process and external magnetic field to design macrocellular silica scaffolds. Colloid Surf. A 263 1-3 (2005) 341-346
55. Maeseto T., Kitaoka T., Toriu S., Fujii S., and Kobune M. Cause of exfoliation of glass lining layer on stainless steel. Kagaku kogaku ronbunshu (in Japanese) 27 6 (2001) 761-764
56. Website: http://www.jst.go.jp/project/concept/report066/report066.html (accessed Feb. 2007, in Japanese).
57. Website: http://www.jst.go.jp/tt/dokusou/pdf/res_pdf/res_10_2/res_10_2066.pdf (accessed Feb. 2007, in Japanese).
58. Guglielmi M., Festa D., Innocenzi P.C., Colombo P., and Gobbin M. Borosilicate coatings on mild steel. J. Non-Cryst. Solid 147 148 (1992) 474-477
59. Di Giampaolo Conde A.R., Puerta M., Ruiz H., and Lira Olivares J. Thick aluminosilicate coatings on carbon steel via sol-gel. J. Non-Cryst. Solid 147 148 (1992) 467-473