Friction stir welding of aluminium alloys

International Materials Reviews

Volumn 54, Issue 2, 2009, Pages 49-93

  Threadgilll, P L ^a   Leonard, A J ^b   Shercliff, H R ^c   Withers, P J ^d  

^a TWI LTD   (United Kingdom)

^b BP International   (United Kingdom)

^c UNIVERSITY OF CAMBRIDGE   (United Kingdom)

^d UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

Aluminium alloys; Friction stir welding; Mechanical properties; Microstructure evolution; Plastic flow; Residual stress; Thermomechanically affected zone

Indexed keywords

ALUMINUM ALLOYS; CORROSION FATIGUE; FRACTURE; FRICTION; MICROSTRUCTURE; PLASTIC FLOW; RESEARCH LABORATORIES; RESIDUAL STRESSES; TRIBOLOGY;

BASIC PRINCIPLES; BODY OF KNOWLEDGE; FRICTION-STIR-WELDING; METAL FLOW; MICROSTRUCTURAL DEVELOPMENT; MICROSTRUCTURE EVOLUTIONS; PROCESS PARAMETERS; THERMAL HISTORY; THERMOMECHANICALLY AFFECTED ZONES; WELD MICROSTRUCTURES;

FRICTION STIR WELDING;

EID: 66049120163     PISSN: 09506608     EISSN: None     Source Type: Journal    
DOI: 10.1179/174328009X411136     Document Type: Review

References (427)

1. W. M. Thomas, E. D. Nicholas, J. C. Needham, M. G. Murch, P. Temple-Smith and C. J. Dawes: 'Friction stir butt welding', GB patent no. 9125978-8, 1991.
2. W. M. Thomas, E. D. Nicholas, J. C. Needham, M. G. Murch, P. Temple-Smith and C. J. Dawes: 'Improvements relating to friction welding', US patent no.5 460 317; EPS 0 616 490, 1991.
3. I. J. Smith and D. D. R. Lord: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI, Paper no. 2007-01-1707.
4. P. L. Threadgill: Sci. Technol. Weld. Join., 2007, 12, 357-360.
5. W. Tang, X. Guo, J. C. McClure and L. E. Murr: J. Mater. Process. Manuf. Sci., 1999, 7, 163-172.
6. M. W. Mahoney, C. G. Rhodes, J. G. Flintoff, R. A. Spurling and W. H. Bingel: Metall. Mater. Trans. A, 1998, 29A, 1955-1964.
7. A. P. Reynolds, W. D. Lockwood and T. U. Seidel: Mater. Sci Forum, 2000, 331-337, 1719-1724.
8. L. E. Murr, G. Liu and J. C. McClure: J. Mater. Sci., 1998, 33, 1243-1251.
9. G. J. Bendszak, T. H. North and C. B. Smith: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000,TWI.
10. K. A. A. Hassan, P. B. Prangnell, A. F. Norman, D. A. Price and S. W. Williams: Sci. Technol. Weld. Join., 2003, 8, 257-268.
11. Y. K. Yang, H. Dong and S. Kou: Weld. J., 2008, 87, 202s-211s
12. A. Gerlich, M. Yamamoto and T. H. North: Sci. Technol. Weld. Join., 2007, 12, 472-480.
13. J. H. Yan, M. A. Sutton and A. P. Reynolds: Sci. Technol. Weld. Join., 2005, 10, 725-736.
14. P. A. Colegrove, H. R. Shercliff and R. Zettler: Sci. Technol. Weld. Join., 2007, 12, 284-297.
15. C.-G. Andersson, R. E. Andrews, B. G. I. Dance, M. J. Russell, E. J. Olden and R. M. Sanderson: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
16. L. Cedeqvist and R. E. Andrews: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI, 1400-1430.
17. K. Savolainen, J. Mononen, T. Saukkonen, H. Hanninen and J. Koivula: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI, 19.
18. W. B. Lee and S. B. Jung: Mater. Lett., 2004, 58, 1041-1046.
19. H. S. Park, T. Kimura, T. Murakami, Y. Nagano, K. Nakata and M. Ushio: Mater. Sci. Eng. A, 2004, A371, 160-169.
20. T. Sakthivel and J. Mukhopadhyay: J. Mater. Sci., 2007, 42, 8126-8129.
21. G. M. Xie, Z. Y. Ma and L. Geng: Scr. Mater., 2007, 57, 73-76.
22. P. Volovitch, J.-E. Masse, T. Baudin, B. da Costa, J. C. Goussain, W. Saikaly and L. Barrallier: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
23. J. A. Esparza, W. C. Davis, E. A. Trillo and L. E. Murr: Mater.Sci. Lett., 2002, 21, 917-920.
24. R. Johnson: Mater. Sci. Forum, 2003, 419-422, 365-370.
25. P. L. Threadgill and R. Johnson: Proc. Symp. on 'Magnesium technology', San Diego, CA, USA, March 2003, TMS.
26. W. B. Lee, J. W. Kim, Y. M. Yeon and S. B. Jung: Mater. Trans., 2003, 44, 917-923.
27. S. H. C. Park, Y. S. Sato and H. Kokawa: Scr. Mater., 2003, 49, 161-166.
28. S. H. C. Park, Y. S. Sato, H. Kokawa and T. Tsukeda: in 'Trends in welding research', (ed. S. A. David et al.), 267-272; 2003, Materials Park, OH, ASM International.
29. N. Afrin, D. L. Chen, X. Cao and M. Jahazi: Mater. Sci. Eng. A,2008, A472, 179-186.
30. W. B. Lee, C. Y. Lee, W. S. Chang, Y. M. Yeon and S. B. Jung: Mater. Lett., 2005, 59, 3315-3318.
31. A. J. Ramirez and M. C. Juhas: Mater. Sci. Forum, 2003, 426-432, 2999-3004.
32. A. P. Reynolds, E. Hood and W. Tang: Scr. Mater., 2005, 52, 491-494.
33. B. P. Wynne, P. S. Davies, M. J. Thomas, B. S. Ng and P. L.Threadgill: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI.
34. M. J. Russell, P. L. Threadgill, M. J. Thomas and B. P. Wynne: Proc. 11th Int. Conf. on 'Titanium', Kyoto, Japan, June 2007, Japan Institute of Metals, 1095-1098.
35. W. M. Thomas, P. L. Threadgill and E. D. Nicholas: Sci. Technol. Weld. Join., 1999, 4, 365-372.
36. R. Johnson and P. L. Threadgill: Proc. 6th Int. Conf. on 'Trends in welding research', Pine Mountain, GA, USA, June 2002, TWI.
37. T. J. Lienert, W. L. Stellwag, B. B. Grimmett and R. W. Warke: Weld. J., 2003, 82, 1S-9S.
38. S. H. C. Park, Y. S. Sato, H. Kokawa, K. Okamoto, S. Hirano and M. Inagaki: Scr. Mater., 2003, 49, 1175-1180.
39. A. P. Reynolds, W. Tang, T. Gnaupel-Herold and H. Prask: Scr. Mater., 2003, 48, 1289-1294.
40. A. P. Reynolds, W. Tang, M. Posada and J. DeLoach: Sci. Technol. Weld. Join., 2003, 8, 455-460.
41. H. Fujii, L. Cui, N. Tsuji, M. Maeda, K. Nakata and K. Nogi: Mater. Sci. Eng. A, 2006, A429, 50-57.
42. L. Cui, H. Fujii, N. Tsuji and K. Nogi: Scr. Mater., 2007, 56, 637-640.
43. S. J. Barnes, A. Steuwer, S. Mahawish, R. Johnson and P. J.Withers: Mater. Sci. Eng. A, 2008, A492, 35-44.
44. H. J. Jun and R. Ayer: Proc. 6th Int. Symp. on 'Friction stir welding', Saint-Sauveur, Montreal, Canada, October 2006, TWI.
45. H. J. Jun, R. Ayer, T. Neeraj and R. Steel: Mater. Sci. Forum, 2007, 539-543, 3763-3768.
46. F. X. Ye, H. Fujii, T. Tsumura and K. Nakata: J. Mater. Sci., 2006, 41, 5376-5379.
47. H. Fujii, H. Kato, K. Nakata and K. Nogi: Proc. 6th Int. Symp. on 'Friction stir welding', Saint-Sauveur, Montreal, Canada, October 2006, TWI.
48. G. Biallas, R. Braun, C. Dalle Donne, G. Staniek and W. A. Kaysser: Proc. Conf. 1st Int. Symp. on;Friction stir welding;, Thousand Oaks, CA, USA, June 1999, TWI.
49. H. Larsson, L. Karlsson, S. Stoltz and E.-L. Bergqvist: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
50. S. Tanaka and M. Kumagai: Proc. 3rd Int. Symp. on 'Friction stir welding', Kobe, Japan, September 2001, TWI.
51. H. R. Shercliff, M. J. Russell, A. D. Taylor and T. L. Dickerson:Mecan. Indust., 2005, 6, 25-35.
52. M. J. Peel, A. Steuwer and P. J. Withers: Metall. Mater. Trans. A, 2006, 37A, 2195-2206.
53. M. J. Peel, A. Steuwer, P. J. Withers, T. Dickerson, Q. Shi and H. Shercliff: Metall. Mater. Trans. A, 2006, 37A, 2183-2193.
54. A. Steuwer, M. J. Peel and P. J. Withers: Mater. Sci. Eng. A, 2006, A441, 187-196.
55. F. Palm: Proc. Conf. Materials Week '99, Munich, Germany, September 1999, DGM.
56. W. B. Lee, Y. M. Yeon and S. B. Jung: Scr. Mater., 2003, 49, 423-428.
57. Y. Li, L. E. Murr and J. C. McClure: Mater. Sci. Eng. A, 1999, A271, 213-223.
58. Y. Li, L. E. Murr and J. C. McClure: Scr. Mater., 1999, 40, 1041-1046.
59. S. Lim, S. Kim and C. G. Lee: Metall. Mater. Trans. A, 2004, 35A,2837-2843.
60. O. T. Midling: Proc. 4th Int. Conf. on 'Aluminium alloys', Atlanta, GA, USA, September 1994, Georgia Institute of Technology, 451-458.
61. J. H. Ouyang and R. Kovacevic: J. Mater. Eng. Perform., 2002, 11, 51-63.
62. A. Gerlich, P. Su and T. H. North: Sci. Technol. Weld. Join., 2005, 10, 647-652.
63. S. A. Khodir and T. Shibayanagi: Mater. Trans., 2007, 48, 2501-2505.
64. Y. S. Sato, S. H. C. Park, M. Michiuchi and H. Kokawa: Scr. Mater., 2004, 50, 1233-1236.
65. A. C. Somasekharan and L. E. Murr: Mater. Charact., 2004, 52,49-64.
66. J. A. Wert: Scr. Mater., 2003, 49, 607-612.
67. C. M. Chen and R. Kovacevic: Int. J. Mach. Tools Manuf., 2004, 44, 1205-1214.
68. K. Kimapong and T. Watanabe: Weld. J., 2004, 83, 277S-282S.
69. H. Uzun, C. D. Donne, A. Argagnotto, T. Ghidini and C. Gambaro: Mater. Design, 2005, 26, 41-46.
70. W. B. Lee and S. B. Jung: Mater. Res. Innov., 2004, 8, 93-96.
71. L. E. Murr, Y. Li, R. D. Flores, E. A. Trillo and J. C. McClure: Mater. Res. Innov., 1998, 2, 150-163.
72. L. E. Murr, R. D. Flores, O. V. Flores, J. C. McClure, G. Liu and D. Brown: Mater. Res. Innov., 1998, 1, 211-223.
73. L. E. Murr, Y. Li, E. A. Trillo, R. D. Flores and J. C. McClure:J. Mater. Process. Manuf. Sci., 1999, 7, 145-161.
74. R. S. Mishra and Z. Y. Ma: Mater. Sci. Eng. R, 2005, R50, 1-78.
75. R. Nandan, T. DebRoy and H. K. D. H. Bhadeshia: Prog. Mater. Sci., 2008, 53, 980-1023.
76. R. S. Mishra and M. W. Mahoney (eds.): in 'ASM specialty handbook: friction stir welding and processing'; 2007, Materials Park, OH, ASM International.
77. H. R. Shercliff and P. A. Colegrove: in 'Mathematical modelling of weld phenomena 6', (ed. H. Cerjak), 927-974; 2002, London, The Institute of Metals.
78. H. R. Shercliff and P. A. Colegrove: in 'Friction stir welding and processing', (ed. R. S. Mishra et al.), 187-217; 2007, Materials Park, OH, ASM International.
79. D. A. Price, S. W. Williams, A. Wescott, C. J. C. Harrison, A. Rezai, A. Steuwer, M. Peel, P. Staron and M. Kocak: Sci. Technol. Weld. Join., 2007, 12, 620-633.
80. M. M. Z. Ahmed, B. P. Wynne, W. M. Rainforth and P. L.Threadgill: Scr. Mater., 2008, 59, 507-510.
81. P. L. Threadgill and M. E. Nunn: 'A review of friction stir welding: part 1 process overview ', TWI members report no. 760/2003, TWI, Abington, UK, 2003.
82. Y. Uematsu, K. Tokaji, Y. Tozaki, T. Kurita and S. Murata: Int. J. Fatig., 2008, 30, 1956-1966.
83. O. T. Midling, J. S. Kvale and O. Dahl: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999,TWI.
84. D. Gesto, V. Pintos, J. Vazquez, J. Rasilla and S. Barreras: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI.
85. 'Super high-speed passenger cargo TSL successfully completed its sea trial', 2005 (accessed September 2008).
86. J. Ray: 'Delta 4 fleet goes from: ''Medium'' to ''Heavy''', in 'Spaceflight Now', 2002.
87. M. R. Johnsen: Weld. J., 1999, 78, 35-39.
88. D. J. Waldron and R. W. Roberts: Proc. Conf. on 'Aerospace automated fastening', Long Beach, CA, USA, September 1998, SAE, 15-17.
89. D. J. Waldron and R. W. Roberts: Proc. Conf. on 'Aerospace automated fastening', Long Beach, CA, USA, September 1998,SAE, 15-17. 89. J. Ding, R. Carter, K. Lawless, A. Nunes, C. Russell, M. Suites and J. Schneider. 'A decade of friction stir welding R and D at NASA's Marshall Space Flight Center and a glance into the future', 20080009619-2008009118.pdf 2005 (accessed September 2008).
90. C. Dawes: Proc. AIAA Int. Air and Space Symp., Dayton, OH, USA, July 2003, AIAA, AIAA-2003-2769.
91. Z. S. Loftus, W. J. Arbegast and P. J. Hartley: Proc. 5th Int. Conf. on 'Trends in welding research', Pine Mountain, GA, USA, June 1998, ASM International, 580.
92. B. Christner, J. McCoury and S. Higgins: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
93. T. Kawasaki, T. Makino, S. Todori, H. Takai, M. Ezumi and Y. Ina: Proc. 2nd Int. Symp. on 'Friction stir welding',Gothenburg, Sweden, June 2000, TWI.
94. D. Otsuka and Y. Sakai: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI.
95. M. M. Shahri and R. Sandstrom: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI.
96. Anon: Mack. Design, 2003, 75,S2.
97. J. C. Bassett and S. S. Birley: Proc 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
98. G. Campbell and T. Stotler: Weld. J., 1999, 78, 45-47.
99. R. S. Mishra and M. W. Mahoney: in 'Superplasticity in advanced materials: ICSAM-2000', 507-512; 2001, Zurich-Uetikon, Trans Tech Publications Ltd.
100. J. Q. Su, T. W. Nelson and C. J. Sterling: Scr. Mater., 2005, 52, 135-140.
101. R. S. Mishra, M. W. Mahoney, S. X. McFadden, N. A. Mara and A. K. Mukherjee: Scr. Mater., 1999, 42, 163-168.
102. P. B. Berbon, W. H. Bingel, R. S. Mishra, C. C. Bampton and M. W. Mahoney: Scr. Mater., 2001, 44, 61-66.
103. J. C. Bersaas, A. Oosterkamp and L. D. Oosterkamp: 'Friction stir welding method and apparatus', Patent no. WO/2001/028732, 2001.
104. P. Su, A. Gerlich, T. H. North and G. J. Bendzsak: Sci. Tecknol. Weld. Join., 2006, 11, 61-71.
105. W. S. Chang, C. K. Chun, H. J. Kim, H. J. Cho and T. K. Kim: Proc. IWJC-Korea 2007, Seoul, South Korea, May 2007, Genicom Co., Ltd, 435-438.
106. M. Mahoney, R. S. Mishra, T. Nelson, J. Flintoff, R. Islamgaliev and Y. Hovansky: in 'Friction stir welding and processing', ((ed. K. V. Jata et al.)), 183-194; 2001, Warrendale, PA, TMS.
107. I. Charit, R. S. Mishra and M. W. Mahoney: Scr. Mater., 2002, 47, 631-636.
108. I. Charit, R. S. Mishra and K. V. Jata: in 'Friction stir welding and processing', ((ed. K. V. Jata et al.)), 225-234; 2001,Warrendale, PA, TMS.
109. I. Shigematsu, N. Saito, T. Komaya, T. Tamaki, G. Yamauchi and M. Nakamura: in 'Friction stir welding and processing', (ed.K. V. Jata et al.), 217-224; 2001, Warrendale, PA, TMS.
110. J. Zheng, R. S. Mishra, P. B. Berbon and M. W. Mahoney: in 'Friction stir welding and processing', ((ed. K. V. Jata et al.)), 235-242; 2001, Warrendale, PA, TMS.
111. T. U. Seidel and A. P. Reynolds: Sci. Tecknol. Weld. Join., 2003,8, 175-183.
112. P. A. Colegrove and H. R. Shercliff: Sci. Tecknol. Weld. Join., 2004, 9, 483-492.
113. A. P. Reynolds: Sci. Tecknol. Weld. Join., 2000, 5, 120-124.
114. W. M. Thomas, E. D. Nicholas and S. D. Smith: in 'Aluminum 2001', (ed. S. K. Das et al.), 213-224; 2001, Warrendale, PA,TMS.
115. P. A. Colegrove and H. R. Shercliff: Sci. Tecknol. Weld. Join.,2004, 9, 352-361.
116. D. Allehaux and F. Marie: Mater. Sci. Forum, 2006, 519-521,1131-1138.
117. C. B. Fuller: in 'Friction stir welding and processing', (ed. R. S.Mishra et al.), 7-35; 2007, Materials Park, OH, ASM International.
118. L. Dubourg and P. Dacheux: Proc. 6th Int. Symp. on 'Friction stir welding', Saint-Sauveur, Mont., Canada, October 2006, TMS.
119. A. Bastier, M. H. Maitournam, K. D. Van and F. Roger: Sci. Tecknol Weld Join, 2006, 11, 278-288.
120. K. Colligan: Weld. J., 1999, 78, 229S-237S.
121. O. Frigaard, O. Grong and O. T. Midling: Metall. Mater. Trans. A, 2001, 32A, 1189-1200.
122. M. J. Russell, H. R. Shercliff and P. L. Threadgill: in 'Aluminum 2001', (ed. S. K. Das et al.), 2001, Warrendale, PA, TMS.
123. Y. J. Chao, X. H. Qi and W. Tang: Trans. ASME J. Manuf. Sci.Eng., 2003, 125, 138-145.
124. M. Song and R. Kovacevic: Proc. Inst. Meck. Eng. B, 2003, 217B, 73-85.
125. A. P. Reynolds, Z. Khandkar, T. Long, W. Tang and J. Khan: Mater. Sci. Forum, 2003, 426-432, 2959-2964.
126. H. Schmidt, J. Hattel and J. Wert: Model. Simul. Mater. Sci. Eng., 2004, 12, 143-157.
127. R. Kovacevic, V. Soundararajan and S. Zekovic: Int. J. Mack. Tools Manuf., 2005, 45, 1577-1587.
128. Q.-Y. Shi, T. L. Dickerson and H. R. Shercliff: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
129. A. Simar, T. Pardoen and B. Meester: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
130. P. A. Colegrove and H. R. Shercliff: Sci. Tecknol. Weld. Join., 2006, 11, 429-441.
131. V. I. Vill': 'Friction welding of metals'; 1959, Mashgiz, Leningrad.
132. R. E. Andrews and K. A. Beamish: 'Characterisation of and guidelines for rotary friction welding of common metallic engineering materials', TWI members report no. 824, TWI, Abington, UK, 2005.
133. Y. G. Kim, H. Fujii, T. Tsumura, T. Komazaki and K. Nakata: Mater. Sci. Eng. A, 2006, A415, 250-254.
134. P. L. Threadgill: TWI Bull., 1997, 28, 30-33.
135. P. L. Threadgill and A. J. Leonard: 'Macro and microstructural features of friction stir welds in various materials', TWI members report no. 693/1999, TWI, Abington, UK, 1999.
136. 'Specification for friction stir welding of aluminum alloys for aerospace applications', Standard D17?3:200X, American Welding Society, Miami, FL, USA, 2006.
137. A. Gerlich, P. Su, M. Yamamoto and T. H. North: Sci. Tecknol. Weld. Join., 2008, 13, 254-264.
138. A. D. Gingell and T. G. Gooch: 'Review of factors influencing porosity in aluminium arc welds', TWI members report no. 625/ 1997, TWI, Abington, UK, 1997.
139. M. F. Gittos and M. H. Scott: TWIBull., 1987, 28, 259-263.
140. A. J. Leonard and S. A. Lockyer: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
141. T. Hashimoto, S. Jyogan, K. Nakata, Y. G. Kiu and M. Ushio: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
142. Y. S. Sato, M. Urata and H. Kokawa: Metall. Mater. Trans. A, 2002, 33A, 625-635.
143. B. K. Christner and G. D. Sylva: Proc. Conf. ICAWT '96, Columbus, OH, USA, November 1996, EWI, 359-368.
144. S. K. Chimbli, D. J. Medlin and W. J. Arbegast: in 'Friction stir welding and processing IV', (ed. R. S. Mishra et al.), 135-142; 2007, Warrendale, PA, TMS.
145. V. Balasubramanian: Mater. Sci. Eng. A, 2008, A480, 397-403.
146. K. Kumar, S. V. Kailas and T. S. Srivatsan: Mater. Manuf. Process., 2008, 23, 189-195.
147. S. T. Wei, C. Y. Hao and J. C. Chen: Mater. Sci. Eng. A, 2007, A452, 170-177.
148. Y. H. Zhao, S. B. Lin, L. Wu and F. X. Qu: Mater. Lett., 2005, 59, 2948-2952.
149. R. Crawford, G. E. Cook, A. M. Strauss, D. A. Hartman and M. A. Stremler: Sci. Tecknol. Weld. Join., 2006, 11, 657-665.
150. O. Lorrain, V. Favier, H. Zahrouni and M. E. Hadrouz: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, 2008, TWI.
151. H. Schmidt and J. Hattel: in 'Friction stir welding processing III', ((ed. K. V. Jata et al.)), 225-232; 2005, Warrendale, PA, TMS.
152. H. Schmidt and J. Hattel: Model. Simul. Mater. Sci. Eng., 2005, 13, 77-93.
153. H. Jin, S. Saimoto, M. Ball and P. L. Threadgill: Mater. Sci. Tecknol., 2001, 17, 1605-1614.
154. H. Okamura, K. Aota, M. Sakamoto, M. Ezumi and K. Ikeuchi: Weld. Int., 2002, 16, 266-275.
155. F. Palm, H. Steiger and U. Hennebohle: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
156. T. Jene, G. Dobmann, G. Wagner and D. Eifler: Proc. 6th Int. Symp. on 'Friction stir welding', Saint-Sauveur, Montreal, Canada, October 2006, TWI.
157. K. Savolainen, T. Saukkonen, J. Mononen and H. Hanninen: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI.
158. Y. S. Sato, F. Yamashita, Y. Sugiura, S. H. C. Park and H. Kokawa: Scr. Mater., 2004, 50, 365-369.
159. H. Okamura, K. Aota, M. Sakamoto, M. Ezumi and K. Ikeuchi: J. Jpn Weld. Soc., 2001, 19, 446-456.
160. T. L. Dickerson, H. R. Shercliff and H. Schmidt: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
161. C. Z. Zhou, X. Q. Yang and G. H. Luan: Scr. Mater., 2006, 54, 1515-1520.
162. J. Pryzdatek: Proc 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
163. A. J. Leonard: Unpublished work, TWI Ltd, 2001.
164. C. J. Goodfellow and A. J. Leonard: Unpublished work, TWI and Birmingham University, 2003.
165. R. Johnson: 'Further assessment of the friction stir welding of magnesium alloys', TWI members report no. 766/2003, TWI, Abington, UK, 2003.
166. L. Cederqvist and A. R. Reynolds: Weld. J., 2001, 80, 281S-287S.
167. W. M. Thomas, D. G. Staines, I. M. Norris and R. de Frias: Proc. FSW Semin., Porto, Portugal, December 2002, IST.
168. P. A. Colegrove, T. Hyoe and H. R. Shercliff: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
169. D. Levesque, C. Mandache, L. Dubourg and P. Gougeon: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI.
170. C. R. Bird: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, Utah, USA, May 2003, TWI.
171. C. R. Bird: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
172. T. Vugrin, G. Staniek, W. Hillger and C. Dalle Donne: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
173. M. Moles and A. Lamarre: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
174. N. Goldfine, D. Grundy, V. Zilberstein and D. G. Kinchen: Proc. 6th Int. Conf. on 'Trends in welding research', Pine Mountain, GA, April 2002, ASM International.
175. N. Oiwa, S. Iwaki, T. Okada, N. Eguchi, S. Tanaka and K. Namba: Proc. Int. Conf. on 'Aluminium connections', Cleveland, OH, USA, June 2004, Lincoln Electric Company.
176. A. Lamarre, O. Dupuis and M. Moles: Proc. WCNDT 2004, Montreal, Canada, August-September 2004, Paper 84.
177. A. Steuwer, M. Dumont, J. Altenkirch, S. Birosca, A. Deschamps, P. B. Prangnell and P. J. Withers: 'Friction stir welding Al-Li AA2199: I microstructural aspects', In preparation, 2008.
178. A. J. Leonard: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
179. J. Karlsson, B. Karlsson, H. Larsson, L. Karlsson and L.-E. Svensson: Proc. 7th Int. Conf. on 'Joints in aluminium', Cambridge, UK, April 1998, TWI, 221-230.
180. M. Peel, A. Steuwer, M. Preuss and P. J. Withers: Acta Mater., 2003, 51, 4791-4801.
181. H. W. Hayden, S. A. David, S. S. Babu, S. Spooner, J. M. Vitek and P. J. Hartley: Prof. Conf. 3rd Int. Forum on 'Aluminium ships', Haugesund, Norway, May 1998.
182. J. Q. Su, T. W. Nelson, R. Mishra and M. Mahoney: Acta Mater., 2003, 51, 713-729.
183. A. F. Norman, I. Brough and P. B. Prangnell: Mater. Sci. Forum, 2000, 331-333, 1713-1718.
184. M. M. Attallah, C. L. Davis and M. Strangwood: Sci. Technol. Weld. Join., 2007, 12, 361-369.
185. K. N. Krishnan: Mater. Sci. Eng. A, 2002, A327, 246-251.
186. T. U. Seidel and A. P. Reynolds: Metall. Mater. Trans. A, 2001, 32A, 2879-2884.
187. M. Strangwood, J. E. Berry, D. P. Cleugh, A. J. Leonard and P. L. Threadgill: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
188. L.-E. Svensson and L. Karlsson: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
189. T. J. Lienert and R. J. Grylls: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
190. C. G. Rhodes, M. W. Mahoney, W. H. Bingel and M. Calabrese: Scr. Mater., 2003, 48, 1451-1455.
191. K. V. Jata, K. K. Sankaran and J. J. Ruschau: Metall. Mater. Trans. A, 2000, 31A, 2181-2192.
192. Y. S. Sato, H. Kokawa, M. Enomoto and S. Jogan: Metall. Mater. Trans. A, 1999, 30A, 2429-2437.
193. K. A. A. Hassan, B. P. Wynne and P. B. Prangnell: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, May 2003, TWI.
194. H. S. Yang: Proc. Conf. 6th Int. Conf. on 'Aluminium alloys', Toyohashi, Japan, July 1998, The Japan Institute of Light Metals, 1483-1488.
195. O. Frigaard, O. Grong, J. Hjelen, S. Gulbrandsen-Dahl and O. T. Midling: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
196. R. W. Fonda, J. F. Bingert and K. J. Colligan: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004,TWI.
197. R. S. Mishra, R. K. Islamgaliev, T. W. Nelson, Y. Hovansky and M. W. Mahoney: in 'Friction stir welding and processing', ((ed. K. V. Jata et al.)), 205-216; 2001, Warrendale, PA, TMS.
198. K. V. Jata and S. L. Semiatin: Scr Mater, 2000, 43, 743-749.
199. P. B. Prangnell and C. P. Heason: Acta Mater., 2005, 53, 3179-3192.
200. Y. S. Sato, H. Watanabe, S. H. C. Park and H. Kokawa: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
201. R. S. Mishra, R. K. Islamgaliev, T. W. Nelson, Y. Hovansky and M. W. Mahoney: in 'Friction stir welding and processing', ((ed. K. V. Jata et al.)), 205-216; 2001, Warrendale, PA, TMS.
202. E. Litwinski: Proc. 3rd Int. Symp. on 'Friction stir welding', Kobe, Japan, September 2001, TWI.
203. M. M. Attallah and H. G. Salem Hassan: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
204. Y. S. Sato and H. Kokawa: Metall. Mater. Trans. A, 2001, 32A, 3023-3031.
205. K. N. Krishnan: J. Mater. Sci., 2002, 37, 473-480.
206. M. Karlsen, S. Tangen, J. Hjelen, 0. Frigaard and 0. Grong: Proc. 3rd Int. Symp. on 'Friction stir welding', Kobe, Japan, September 2001, TWI.
207. K. A. A. Hassan, A. F. Norman, D. A. Price and P. B. Prangnell: Acta Mater., 2003, 51, 1923-1936.
208. F. J. Humphreys and M. Hatherly: 'Recrystallisation and related annealing phenomena'; 1995, Oxford, Pergamon.
209. F. J. Humphreys: Acta Mater., 1997, 45, 5031-5039.
210. F. J. Humphreys: Acta Mater., 1997, 45, 4231-4240.
211. M. F. Gittos and K. Bridges: 'A study of arc and friction stir welding of two Al alloys containing a low level scandium addition', TWI members report no. 776/2003, TWI, Abington, UK, 2003.
212. B. Huneau, X. Sauvage, S. Marya and A. Poitou: in 'Friction stir welding processing III', ((ed. K. V. Jata et al.)), 253-260; 2005, Warrendale, PA, TMS.
213. C. S. Paglia, K. V. Jata and R. G. Buchheit: Mater. Sci. Eng. A, 2006, A424, 196-204.
214. Y. S. Sato, M. Urata, H. Kokawa and K. Ikeda: Scr. Mater., 2002, 47, 869-873.
215. I. Charit and R. S. Mishra: Acta Mater., 2005, 53, 4211-4223.
216. C. J. Hsu, C. Y. Chang, P. W. Kao, N. J. Ho and C. P. Chang: Acta Mater., 2006, 54, 5241-5249.
217. Y. S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, S. Jogan and T. Hashimoto: Metall. Mater. Trans. A, 2001, 32A, 941-948.
218. D. P. Field, T. W. Nelson, Y. Hovanski and K. V. Jata: Metall. Mater. Trans. A, 2001, 32A, 2869-2877.
219. T. W. Nelson, B. Hunsaker and D. P. Field: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
220. O. V. Flores, C. Kennedy, L. E. Murr, D. Brown, S. Pappu, B. M. Nowak and J. C. McClure: Scr. Mater., 1998, 38, 703-708.
221. H. Larsson, L. Karlsson and L.-E. Svensson: Proc. 6th Int. Conf. on 'Aluminium alloys', Toyohashi, Japan, July 1998, The Japan Institute of Light Metals, 1471-1476.
222. C. Genevois, A. Deschamps and A. Denquin: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
223. M. M. Attallah, C. L. Davis and M. Strangwood: J. Mater. Sci., 2007, 42, 7299-7306.
224. R. W. Fonda and J. F. Bingert: in 'Friction stir welding and processing II', ((ed. K. V. Jata et al.)), 191-198; 2003, Warrendale, PA, TMS.
225. C. G. Rhodes, M. W. Mahoney, W. H. Bingel, R. A. Spurling and C. C. Bampton: Scr. Mater., 1997, 36, 69-75.
226. M. Kumagai and S. Tanaka: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
227. Y. S. Sato, H. Kokawa, M. Enomoto, S. Jogan and T. Hashimoto: Metall. Mater. Trans. A, 1999, 30A, 3125-3130.
228. Y. S. Sato, S. H. C. Park and H. Kokawa: Metall. Mater. Trans. A, 2001, 32A, 3033-3042.
229. J. D. Robson, A. Sullivan, H. R. Shercliff and G. McShane: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
230. M. Dumont, A. Steuwer, A. Deschamps, M. Peel and P. J. Withers: Acta Mater., 2006, 54, 4793-4801.
231. R. W. Fonda, J. F. Bingert and K. J. Colligan: Scr. Mater., 2004, 51, 243-248.
232. C. Genevois, A. Deschamps, A. Denquin and B. Doisneau- cottignies: Acta Mater., 2005, 53, 2447-2458.
233. C. J. Dawes: TWI Bull., 2000, 41, 51-55.
234. K. Lindner, Z. Khandkar, J. Khan, W. Tang and A. P. Reynolds: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
235. R. Y. Hwang and C. P. Chou: Scr. Mater., 1997, 38, 215-221.
236. A. Sullivan and J. D. Robson: Mater. Sci. Eng. A, 2008, A478, 351-360.
237. L. E. Svensson, L. Karlsson, H. Larsson, B. Karlsson, M. Fazzini and J. Karlsson: Sci. Tecknol. Weld. Join., 2000, 5, 285-296.
238. O. R. Myhr and 0. Grong: Acta Metall. Mater, 1991, 39, 2703-2711.
239. O. R. Myhr and 0. Grong: Acta Metall. Mater, 1991, 39, 2693-2702.
240. O. R. Myhr, O. Grong, S. Klokkehaug, H. G. Fjoer and A. O.Kluken: Sci. Tecknol. Weld. Join., 1997, 2, 245-253.
241. 0. Grong and H. R. Shercliff: Prog. Mater. Sci., 2002, 47, 163-282.
242. O. Grong and O. R. Myhr: Acta Mater., 2000, 48, 445-452.
243. O. R. Myhr and O. Grong: Acta Mater., 2000, 48, 1605-1615.
244. M. Nicolas and A. Deschamps: Acta Mater., 2003, 2003, 6077-6094.
245. T. Hyoe, P. A. Colegrove and H. R. Shercliff: in 'Friction stir welding and processing II', (ed. K. V. Jata et al.), 33-42; 2003,Warrendale, PA, TMS.
246. J. D. Robson, A. Sullivan, G. McShane and H. R. Shercliff: Proc.5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
247. C. Gallais, A. Denquin, A. Pic, A. Simar and T. Pardoen: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
248. P. A. Colegrove, H. R. Shercliff, J. D. Robson, N. Kamp,A. Sullivan and S. W. Williams: in 'Mathematical modelling of weld phenomena 8', (ed. H. Cerjak et al.), 2008, London, Maney Publishing.
249. A. Sullivan, N. Kamp and J. D. Robson: Mater. Sci. Forum, 2006, 519-521, 1181-1186.
250. N. Kamp, A. Sullivan, R. Tomasi and J. D. Robson: Acta Mater.,2006, 54, 2003-2014.
251. N. Kamp, A. Sullivan and J. D. Robson: Mater. Sci. Eng. A,2007, A466, 246-255.
252. A. Deschamps and Y. Brechet: Acta Mater., 1998, 47, 293-305.
253. A. Deschamps, F. Livet and Y. Brechet: Acta Mater., 1998, 47, 281-292.
254. C. G. Derry and J. D. Robson: Mater. Sci. Eng. A, 2008, A490, 328-334.
255. M. W. Mahoney: in 'Friction stir welding and processing', (ed.R. S. Mishra et al.), 187-217; 2007, Materials Park, OH, ASM International.
256. H. J. Liu, H. Fujii, M. Maeda and K. Nogi: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
257. A. von Strombeck, G. (Cam, J. F. dos Santos, V. Venzke and M. Kocak: in 'Aluminum 2001', (ed. S. K. Das et al.), 249-264;2001, Warrendale, PA, TMS.
258. S. Brinkmann, A. von Strombeck, C. Schilling, J. F. dos Santos, D. Lohwasser and M. Kocak: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
259. A. von Strombeck, J. F. dos Santos, F. Torster, P. Laureano and M. Kocak: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, USA, June 1999, TWI.
260. D. Allehaux, G. Petit, M.-H. Campagnac, G. Lapasset and A. Denquin: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
261. A. Denquin, D. Allehaux, H.-H. Campagnac and G. Lapasset: Proc. 3rd Int. Symp. on 'Friction stir welding', Kobe, Japan,September 2001, TWI.
262. G. Biallas and C. D. Donne: Materialprufung, 2000, 42, 236-239.
263. O. Hatamleh, J. Lyons and R. Forman: Int. J. Fatig., 2007, 29, 421-434.
264. M. A. Sutton, B. C. Yang, A. P. Reynolds and J. H. Yan: Mater. Sci. Eng. A, 2004, A364, 66-74.
265. M. J. Peel, M. Preuss, A. Steuwer, M. Turski and P. J. Withers: in 'Trends in welding research, proceedings', (ed. S. A. David et al.),273-278; 2003, Materials Park, OH, ASM International.
266. J. Altenkirch, A. Steuwer, M. J. Peel, D. G. Richards and P. J.Withers: Mater. Sci. Eng. A, 2008, A488, 16-24.
267. J. K. Kristensen, C. Dalle Donne, T. Ghidini, J. Mononen, A. Norman, A. Pietras, M. J. Russell and S. Slater: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004,TWI.
268. H. J. Liu, H. Fujii, M. Maeda and K. Nogi: Mater. Sci. Tecknol., 2004, 20, 103-105.
269. H. J. Liu, H. Fujii, M. Maeda and K. Nogi: J. Mater. Process. Tecknol., 2003, 142, 692-696.
270. Lockheed Martín: presented at Aeromat '99, Dayton, OH, USA, June 1999, ASM.
271. K. Masubuchi: in 'Encyclopedia of materials: science and technology', (ed. K. H. J. Buschow et al.), 8121-8126; 2003, Oxford, Elsevier.
272. P. J. Withers and H. K. D. H. Bhadeshia: Mater. Sci. Tecknol., 2001, 17, 366-375.
273. J. Lu (ed.): in 'Handbook of measurement of residual stresses'; 1996, Lilburn, GA, Fairmont Press.
274. M. B. Prime: J. Mater. Eng. Tecknol., 2001, 123, 162-168.
275. P. J. Withers, M. Turski, L. Edwards, P. J. Bouchard and D. J.Buttle: Int. J. Press. Vess. Pip., 2008, 85, 118-127.
276. P. J. Withers: C. R. Pkys., 2007, 8, 806-820.
277. P. J. Withers and P. J. Webster: Strain, 2001, 37, 19-31.
278. P. J. Withers, M. Preuss, P. J. Webster, D. J. Hughes and A. M. Korsunsky: Mater. Sci. Forum, 2002, 404-407, 1-10.
279. D. J. Buttle and C. Scruby: in 'Encyclopedia ofmaterials: science and technology', (ed. K. H. J. Buschow et al.), 8173-8180; 2001, Oxford, Elsevier.
280. L. D. Oosterkamp, P. J. Webster, P. A. Browne, G. B. M.Vaughan and P. J. Withers: Proc. 5th Eur. Conf. on 'Residual stresses', Mater. Sci. Forum, 2000, 347-349, 687-693.
281. C. Dalle Donne: Proc. 3rd Int. Symp. on 'Friction stir welding',Kobe, Japan, September 2001, TWI.
282. P. J. Webster, L. D. Oosterkamp, P. A. Browne, D. J. Hughes, W. P. Kang, P. J. Withers and G. B. M. Vaughan: J. Strain Anal. Eng. Design, 2001, 36, 61-70.
283. M. N. James, D. J. Hughes, D. G. Hattingh, G. R. Bradley, G. Mills and P. J. Webster: Fatig. Fract. Eng. Mater. Struct., 2004, 27, 187-202.
284. X. L. Wang, Z. Feng, S. A. David, S. Spooner and C. R. Hubbard: Proc. 6th Int. Conf. on 'Residual stresses', Oxford, UK, July 2000, IOM.
285. P. Staron, M. Kocak and S. Williams: in 'Trends in welding research, proceedings', (ed. S. A. David et al.), 253-256; 2003, Materials Park, OH, ASM International.
286. M. B. Prime, T. Gnaupel-Herold, J. A. Baumann, R. J. Lederich,D. M. Bowden and R. J. Sebring: Acta Mater., 2006, 54, 4013-4021.
287. M. Mahoney, C. Fuller, A. DeWald and M. R. Hill: Proc. 6th Int.Symp. on 'Friction stir welding', Saint-Sauveur, Montreal, Canada, October 2006, TWI.
288. T. Ghidini and C. Dalle Donne: Fatig. Fract. Eng. Mater. Struct., 2007, 30, 214-222.
289. D. Stefanescu, C. E. Truman, D. J. Smith and P. S. Whitehead: Experim. Meck., 2006, 46, 417-427.
290. P. Staron, M. Kocak, S. Williams and A. Wescott: Pkysica B, 2004, 350B, E491-E493.
291. R. A. Owen, R. V. Preston, P. J. Withers, H. R. Shercliff and P. J. Webster: Mater. Sci. Eng. A, 2003, A346, 159-167.
292. M. A. Sutton, A. P. Reynolds, D. Q. Wang and C. R. Hubbard: J. Eng. Mater. Tecknol., 2002, 124, 215-221.
293. Y. J. Chao and X. H. Qi: J. Mater. Process. Manuf. Sci., 1999, 7,215-233.
294. C. M. Chen and R. Kovacevic: Int. J. Mack. Tools Manuf., 2003,43, 1319-1326.
295. Z. Feng, X. L. Wang, S. A. David and P. S. Sklad: Sci. Tecknol. Weld. Join., 2007, 12, 348-356.
296. D. G. Richards, P. B. Prangnell, S. W. Williams and P. J. Withers: Mater. Sci. Eng., 2008, 489, 351-362.
297. A. Bastier, M. H. Maitournam, F. Roger and K. D. Van: J. Mater. Process. Tecknol., 2008, 200, 25-37.
298. T. D. Vuyst, V. Madhavan, B. Ducoeur, A. Simar, B. D. Meester and L. D'Alvise: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI.
299. M. T. Milan, W. W. Bose, J. R. Tarpani, A. M. S. Malafaia, C. P. O. Silva, B. C. Pellizer and L. E. Pereira: J. Mater. Eng. Perform., 2007, 16, 86-92.
300. H. Lombard, D. G. Hattingh, A. Steuwer and M. N. James: Mater. Sci. Eng. A, 2009, A501, 119-124.
301. J. Altenkirch, A. Steuwer, M. Poad and P. J. Withers: 'Residual stresses in 2199 as a function of welding conditions', to be submitted.
302. T. W. Greene and A. A. Holzbaur: Weld. J. Res. Suppl., 1946, 11, 171s-185s.
303. P. A. McGuire and J. J. Groom: 'Computational analysis and experimental evaluation for residual stresses from induction heating', RP1394-4, Battelle Memorial Institute, 1979.
304. P. Michaleris and X. Sun: Weld. J., 1997, 76, 451s-457s.
305. R. M. Dull, J. R. Dydo and J. J. Russell: Proc. 82nd Annual AWS Convention, Cleveland, OH, USA, May 2001, AWS, 95-96.
306. P. Dong, J. K. Hong and P. Rogers: Weld. J., 1998, 77, 439s-445s.
307. T. E. Barber, F. W. Brust, H. W. Mishler and M. F. Kanninen: 'Controlling residual stresses by heat sink welding', EPRI report no. NP-2159-LD, Electric Power Research Institute, Palo Alto, CA, USA, 1981.
308. E. M. van der Aa, M. J. M. Hermans, I. M. Richardson, N. M. van der Pers and R. Delhez: Mater. Sci. Forum, 2006, 524-525, 479-484.
309. J. Gabzdyl, M. Cole, S. W. Williams and D. Price: Proc. ICALEO 2001, Jacksonville, FL, USA, October 2001, Laser Institute of America, Vols. 92 and 93, 1236-1245.
310. J. T. Gabzdyl: 'Thermal welding', US patent no. 20010054639, 2001.
311. D. G. Richards, P. B. Prangnell, P. J. Withers, S. W. Williams and S. Morgan: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI.
312. G. Luan, G. Li, C. Li and C. Dong: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI.
313. Y. P. Yang, P. Dong, X. Tian and Z. Zhang: Proc. 5th Int. Conf. on 'Trends in welding research', (ed. S. A. David et al.), 700-705;1998, Materials Park, OH, ASM International.
314. Y. P. Yang, P. Dong, J. Zhang and X. Tian: Weld. J. Res. Suppl., 2000, 79, 9s-17s.
315. S. W. Williams, D. A. Price, A. Wescott, C. J. C. Harrison, P. Staron and M. Kocak: Proc. Conf. on 'Welding and brazing of aerospace structures - modern applications and materials for new and in-service', Berlin, Germany, May 2004, DVS Berichte, 95-101.
316. A. L. Lafly, C. D. Donne, G. Biallas, D. Allehaux and F. Marie: Mater. Sci. Forum, 2006, 519-521, 1089-1094.
317. P. Prevey and M. Mahoney: Mater. Sci. Forum, 2003, 426-432, 2933-2939.
318. P. S. Prevey, D. J. Hornbach and N. Jayaraman: Mater. Sci. Forum, 2007, 539-547, 3807-3813.
319. A. Ali, X. An, C. A. Rodopoulos, M. W. Brown, P. O'Hara, A. Levers and S. Gardiner: Int.l J. Fatig., 2007, 29, 1531-1545.
320. O. Hatamleh, J. Lyons and R. Forman: Fatig. Fract. Eng. Mater. Struct., 2007, 30, 115-130.
321. O. Hatamleh, I. V. Rivero and J. Lyons: J. Mater. Eng. Perform., 2007, 16, 549-553.
322. N. Jayaraman, P. Prevey and M. Mahoney: in 'Friction stir welding and processing II', (ed. K. V. Jata et al.), 259-269; 2003, Warrendale, PA, TMS.
323. S. W. Wen, S. W. Williams, S. A. Morgan, A. Wescott and M. Poad: submitted to Sci. Tecknol. Weld. Join.
324. J. Altenkirch, A. Steuwer, P. J. Withers, S. W. Williams, M. Poad and S. Wen: Sci. Tecknol. Weld. Join., 2009, 14, 185-192.
325. S. W. Williams, D. A. Price, W. Wescott, A. Steuwer, M. Peel,J. Altenkirch, P. J. Withers and M. Poad: Proc. 6th Int. Symp. on 'Friction stir welding', Saint-Sauveur, Montreal, Canada, October 2006, TWI.
326. J. Altenkirch, A. Steuwer, M. J. Peel, P. J. Withers, S. Williams and M. Poad: Metall. Mater. Trans. A, 2008, 39A, 3246-3259.
327. J. Z. Zhang, R. Pedwell and H. Davies: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
328. G. E. Shepherd: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
329. L. Magnusson and L. Kallman: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
330. H. Hori, S. Makita and H. Hino: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, June 1999, TWI.
331. G. Bussu and P. E. Irving: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, June 1999, TWI.
332. D. Lohwasser: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
333. M. Ericsson and R. Sandstrom: Int. J. Fatig., 2003, 25, 1379-1387.
334. P. Moreira, A. M. P. de Jesus, A. S. Ribeiro and P. de Castro: in 'Advances in fracture and damage mechanics VI', (ed. J. Alfaiate et al.), 209-212; 2007, Zurich, Trans Tech Publications.
335. M. Ericsson, R. Sandstrom and J. Hagstrom: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000,TWI.
336. S. Kim, C. G. Lee and S.-J. Kim: Mater. Sci. Eng. A, 2008, A478, 56-64.
337. H. Lombard, D. G. Hattingh, A. Steuwer and M. N. James: Eng. Fract. Meck., 2008, 75, 341-354.
338. C. Dalle Donne, G. Biallas, T. Ghidini and G. Raimbeaux: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
339. R. John and K. V. Jata: in 'Friction stir welding and processing', (ed. K. V. Jata et al.), 57-69; 2001, Warrendale, PA, TMS.
340. A. Cirello, G. Buffa, L. Fratini and S. Pasta: Proc. Inst. Meck. Eng. B, 2006, 220B, 805-811.
341. G. Bussu and P. E. Irving: Int. J. Fatig., 2003, 25, 77-88.
342. J. M. L. Tan, M. E. Fitzpatrick and L. Edwards: Eng. Fract. Meck., 2007, 74, 2030-2054.
343. S. S. Di, X. Q. Yang, G. H. Luan and B. Jian: Mater. Sci. Eng. A, 2006, A435, 389-395.
344. C. Z. Zhou, X. Q. Yang and G. H. Luan: J. Mater. Sci., 2006, 41, 2771-2777.
345. A. Oosterkamp, L. D. Oosterkamp and A. Nordeide: Weld. J., 2004, 83, 225S-231S.
346. A. Ali, M. W. Brown and C. A. Rodopoulos: Proc. 6th Int. Symp. on 'Friction stir welding', Saint-Sauveur, Montreal, Canada, October 2006, TWI.
347. H. B. Chen, K. Yan, T. Lin, S. B. Chen, C. Y. Jiang and Y. Zhao: Mater. Sci. Eng. A, 2006, A433, 64-69.
348. M. N. James, D. G. Hattingh and G. R. Bradley: Int. J. Fatig., 2003, 25, 1389-1398.
349. M. N. James, G. R. Bradley, H. Lombard and D. G. Hattingh: Fatig. Fract. Eng. Mater. Struct., 2005, 28, 245-256.
350. T. L. Dickerson and J. Przydatek: Int. J. Fatig., 2003, 25, 1399-1409.
351. C. A. Widener, B. M. Tweedy and D. A. Burford: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008,TWI.
352. C. Dalle Donne and G. Biallas: Proc. Eur. Conf. on 'Spacecraft structures, materials and mechanical testing', Noordwijk, The Netherlands, November-December 1999, ESA, 309-314.
353. S. G. Russell, M. Tester, E. Nichols, A. Cleaver and J. Maynor: in 'Friction stir welding and processing', (ed. K. V. Jata et al.), 93-104; 2001, Warrendale, PA, TMS.
354. M. T. Milan, W. W. B. Filho, C. O. F. T. Ruckert and J. R.Tarpani: Fatig. Fract. Eng. Mater. Struct., 2008, 31, 526-538.
355. C. Z. Zhou, X. Q. Yang and G. H. Luan: Scr. Mater., 2005, 53,1187-1191.
356. H. Q. Qu, M. Tsujikawa, S. W. Chung, S. Oki and K. Higashi: in 'Recrystallization and grain growth III', (ed. S. J. L. Kang et al.), 793-796; 2007, Zurich, Trans Tech Publications.
357. M. Ranes, A. O. Kluken and O. T. Midling: Proc. 4th Int. Conf.on 'Trends in welding research', Gatlinburg, TN, USA, June 1995, ASM International.
358. S. Hong, S. Kim, C. G. Lee and S. J. Kim: J. Mater. Sci., 2007, 42, 9888-9893.
359. P. S. Pao, R. W. Fonda, H. N. Jones, C. R. Feng, B. J. Connolly and A. J. Davenport: in 'Friction stir welding processing III', (ed.K. V. Jata et al.), 27-34; 2005, Warrendale, PA, TMS.
360. P. Cavaliere, G. Campanile, F. Panella and A. Squillace: J. Mater. Process. Tecknol., 2006, 180, 263-270.
361. S. J. Hong, S. S. Kim, C. G. Lee and S. J. Kim: in 'Advances in nanomaterials and processing', (ed. B. T. Ahn et al.), 1321-1324; 2007, Zurich, Trans Tech Publications.
362. M. Ericsson and R. Sandstrom: Steel Res. Int., 2006, 77, 450-455.
363. P. J. Haagensen, O. T. Midling and M. Ranes: in 'Computer methods and experimental measurements for surface treatment effects II', (ed. M. H. Aliabadi et al.), 225-237; 1995, Southampton, Wit Pr/Computational Mechanics.
364. M. Kumagai, S. Tanaka, H. Hatta, H. Yoshida and H. Sato: Proc. 3rd Int. Symp. on 'Friction stir welding', Kobe, Japan, September 2001, TWI.
365. M. Ericsson and R. Sandstrom: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
366. W. M. Thomas, M. F. Gittos, P. Tubby, D. G. Staines and S. Lockyer: 'Friction skew stir lap welding of 5083-H111- preliminary fatigue studies', TWI members report, TWI, Abington, UK, to be published.
367. R. Pedwell, H. Davies and A. Jefferson: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, June 1999, TWI.
368. R. Talwar, D. Bolser, R. Lederich and J. Baumann: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
369. G. E. Shepherd: Proc. 4th Int. Symp. on 'Friction stir welding', Park City, UT, USA, May 2003, TWI.
370. W. M. Thomas, I. M. Norris, D. G. Staines and E. R. Watts: Proc. SME Summit, Oconomowoc, WI, USA, August 2005, SME.
371. D. Fersini and A. Pirondi: Eng. Fract. Mech., 2008, 75, 790-803.
372. D. Hornbach, M. Mahoney, P. Prevey, D. Waldron and J. Cammett: in 'Trends in welding research, proceedings', (ed. S. A. David et al.), 302-306; 2003, Materials Park, OH, ASM International.
373. S. Lomolino, R. Tovo and J. dos Santos: Int. J. Fatig., 2005, 27, 305-316.
374. M. G. Dawes, T. L. Dickerson, S. A. Karger and J. Przydatek: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
375. M. K. Kulekci, F. Mendi, I. Sevim and O. Basturk: Metalurgija, 2005, 44, 209-213.
376. M. A. Sutton, A. P. Reynolds, B. C. Yang and R. Taylor: Eng. Fract. Mech., 2003, 70, 2215-2234.
377. W. J. Arbegast, K. S. Baker and P. J. Hartley: Proc. 5th Int. Conf. on 'Trends in welding research', Pine Mountain, GA, USA, June 1998, ASM International.
378. H. R. Kroninger and A. P. Reynolds: Fatig. Fract. Eng. Mater. Struct., 2002, 25, 283-290.
379. M. Mochizuki, M. Inuzuka, H. Nishida, K. Nakata and M. Toyoda: Sci. Technol. Weld. Join., 2006, 11, 366-370.
380. C. G. Derry and J. D. Robson: Proc. 7th Int. Symp. on 'Friction stir welding', Awaji Island, Japan, May 2008, TWI.
381. M. G. Dawes, S. A. Karger and J. Przydatek: 'Fracture toughness of friction stir welds in 2014A, 7075 and 5083 aluminium alloys', TWI report no. 705/2000, TWI, Abington, UK, 2000.
382. D. G. Kinchen, Z. Li and G. P. Adams: Proc. 1st Int. Symp. on 'Friction stir welding', Thousand Oaks, CA, June 1999, TWI.
383. D. Dumont, A. Deschamps and Y. Brechet: Acta Mater., 2004, 52, 2529-2540.
384. J. Lumsden: in 'Friction Stir Welding and Processing', (ed. R. S. Mishra et al:), 187-217; 2007, Materials Park, OH, ASM International.
385. F. Hannour, A. J. Davenport and M. Strangwood: Proc. 2nd Int. Symp. on 'Friction stir welding', Gothenburg, Sweden, June 2000, TWI.
386. J. Corral, E. A. Trillo, Y. Li and L. E. Murr: J. Mater. Sci. Lett., 2000, 19, 2117-2122.
387. D. P. P. Booth, M. J. Starink and I. Sinclair: Mater. Sci. Technol., 2007, 23, 276-284.
388. A. J. Davenport, M. Jariyaboon, C. Padovani, N. Tareelap, B. J. Connolly, S. Williams and E. Siggs: Mater. Sci. Forum, 2006, 699,519-521.
389. C. Dalle Donne, R. Braun, G. Staniek, A. Jung and W. A. Kaysser: Mater. Werkst., 1998, 29, 609-617.
390. D. B. Mitton, A. Squillace, A. De Fenzo, C. Padovani,T. Monetta, G. Giorleo, P. Cozzolino and F. Bellucci: Corros.Rev., 2007, 25, 449-459.
391. J. B. Lumsden, M. W. Mahoney, G. Pollock and C. G. Rhodes: Corrosion, 1999, 55, 1127-1135.
392. R. G. Buchheit and C. S. Paglia: in 'Corrosion and protection of light metal alloys', (ed. R. G. Buchheit et al.), 94-103; 2004, Pennington, NJ, Electrochemical Society.
393. C. S. Paglia, K. V. Jata and R. G. Buchheit: Mater. Corros., 2007, 58, 737-750.
394. X. Zhou, Y. Younes, D. Wadeson, T. Hashimoto and G. E. Thompson: Adv. Mater. Res., 2008 38, 298-305.
395. B. J. Connolly, A. J. Davenport, M. Jariyaboon, C. Padovani, R. Ambat, S. W. Williams, D. A. Price, A. Wescott, C. J. Goodfellow and C.-M. Lee: Proc. 5th Int. Symp. on 'Friction stir welding', Metz, France, September 2004, TWI.
396. M. Jariyaboon, A. J. Davenport, R. Ambat, B. J. Connolly, S. W. Williams and D. A. Price: Corros. Sci., 2007, 49, 877-909.
397. A. Squillace, A. de Fenzo, G. Giorleo and F. Bellucci: J. Mater. Process. Technol., 2004, 152, 97-105.
398. W. Hu and E. I. Meletis: Mater. Sci. Forum, 2000, 331-337, 1683-1688.
399. C. S. Paglia and R. G. Buchheit: Mater. Sci. Eng. A, 2006, A429,107-114.
400. F. Zucchi, G. Trabanelli and V. Grassi: Mater. Corros., 2001, 52,853-859.
401. S. Maggiolino and C. Schmid: J. Mater. Process. Technol., 2008, 197, 237-240.
402. R. Braun, C. D. Donne and G. Staniek: Mater. Werkst., 2000, 31, 1017-1026.
403. J. B. Lumsden, M. W. Mahoney, C. G. Rhodes and G. A. Pollock: Corrosion, 2003, 59, 212-219.
404. C. S. Paglia, L. M. Ungaro, B. C. Pitts, M. C. Carroll, A. P.Reynolds and R. G. Buchheit: in 'Friction stir welding and processing II', (ed. K. V. Jata et al.), 65-75; 2003, Warrendale,PA, TMS.
405. K. K. Sankaran, H. L. Smith and K. Jata: in 'Trends in welding research, proceedings', (ed. S. A. David et al.), 284-286; 2003, Materials Park, OH, ASM International.
406. D. P. Field, T. W. Nelson, Y. Hovanski and D. F. Bahr: in 'Friction stir welding and processing', (ed. K. V. Jata et al.), 83-91; 2001, Warrendale, PA, TMS.
407. C. S. Paglia, M. C. Carroll, B. C. Pitts, T. Reynolds and R. G. Buchheit: Mater. Sci. Forum, 2002, 396-402, 1677-1684.
408. X. Y. Yun, Y. Motohashi, T. Ito, T. Asano and S. Hirano: J. Jpn Inst. Met., 2006, 70, 96-105.
409. D. A. Wadeson, X. Zhou, G. E. Thompson, P. Skeldon, L. D. Oosterkamp and G. Scamans: Corros. Sci., 2006, 48, 887-897.
410. L. A. Willey: in 'Aluminium: properties, physical metallurgy and phase diagrams', (ed. K. R. van Horn), 140-158; 1967, Cleveland, OH, ASM.
411. J. R. Galvele and S. M. de Micheli: Corros. Sci., 1970, 10, 795-807.
412. J. T. Staley, S. C. Byrne, E. L. Colvin and K. P. Palmer: Mater. Sci. Forum, 1996, 217, 1587-1592.
413. C. M. Lee: Corrosion, submitted.
414. C. S. Paglia and R. G. Buchheit: Scr. Mater., 2008, 58, 383-387.
415. R. Cook, T. Handboy, S. L. Fox and W. Arbegast: in 'Friction stir welding processing III', (ed. K. V. Jata et al.), 35-42; 2005, Warrendale, PA, TMS.
416. P. B. Srinivasan, W. Dietzel, R. Zettler, J. F. dos Santos and V. Sivan: Mater. Sci. Eng. A, 2005, A392, 292-300.
417. C. A. Widener, J. E. Talia, B. M. Tweedy and D. A. Burford: in 'Friction stir welding and processing IV', (ed. R. S. Mishra et al.), 449-458; 2007, Warrendale, PA, TMS.
418. M. Jariyaboon, A. J. Davenport, R. Ambat, B. J. Connolly, S. W. Williams and D. A. Price: Corros. Eng. Sci. Technol., 2006, 41, 135-142.
419. J. Lumsden, G. Pollock and M. Mahoney: Mater. Sci. Forum, 2003, 426-432, 2867-2872.
420. C. A. Widener, D. A. Burford, B. Kumar, J. E. Talia and B. Tweedy: Mater. Sci. Forum, 2007, 539-543, 3781-3788.
421. A. Merati, K. Sarda, D. Raizenne and C. D. Donne: in 'Friction stir welding and processing II', (ed. K. V. Jata et al.), 77-90; 2003, Warrendale, PA, TMS.
422. C. A. Widener, J. E. Talia, B. M. Tweedy and D. A. Burford: in 'Friction stir welding and processing IV', (ed. R. S. Mishra et al.),459-468; 2007, Warrendale, PA, TMS.
423. J. Lumsden, G. Pollock and M. Mahoney: in 'Friction stir welding processing III', (ed. K. V. Jata et al.), 19-25; 2005, Warrendale, PA, TMS.
424. C. Padovani, L. Fratini, A. Squillace and F. Bellucci: Corros. Rev., 2007, 25, 475-489.
425. P. B. Srinivasan, W. Dietzel, R. Zettler, J. F. dos Santos and V. Sivan: Corros. Eng. Sci. Technol., 2007, 42, 161-167.
426. K. P. Rao, G. D. J. Ram and B. E. Stucker: Scr. Mater., 2008, 58, 998-1001.
427. P. Prevey, D. Hornbach, P. Mason and M. Mahoney: in 'Surface engineering: coating and heat treatments, proceedings', (ed. O. Popoola et al.), 131-137; 2003, Materials Park, OH, ASM International.